Hampton Bay YG327B-BN Instructions / Assembly
Contents
1. 16 Reverse Switch Operating Instructions 17 Care and Cleaning eene 17 Troubleshooting 18 Aau 19 Safety Information Safety Information To reduce the risk of electric shock ensure electricity has been turned off at the circuit breaker or fuse box before beginning All wiring must be in accordance with the National Electrical Code ANSI NFPA 70 1999 and local electrical codes Electrical installation should be performed by a qualified licensed electrician The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 Ibs Use only UL listed outlet boxes marked FOR FAN SUPPORT The fan must be mounted with a minimum of 7 ft clearance from the trailing edge of the blades to the floor Avoid placing objects in the path of the blades To avoid personal injury or damage to the fan and other items be cautious when working around or cleaning the fan Do not use water or detergents when cleaning the fan or fan blades A dry dust cloth or lightly dampened cloth will be suitable for most cleaning After making electrical connections spliced conductors should be turned upward and pushed carefully up into the outlet box The wires should be spread apart with the grounded2. Slide the canopy B up to the mounting bracket A and place the key hole on the canopy B over the loose mounting bracket screw BB on the mounting bracket A Turn the canopy B clockwise until the canopy B locks in place at the narrow section of the key holes Align the circular hole on the canopy B with the remaining hole on the mounting bracket A Secure the mounting bracket screw BB previously removed in the hole and tighten the two mounting bracket screws BB Assembly Attaching the Fan Blades 1 0 Attaching the Fan Blades WARNING To reduce the risk of personal injury do not bend the blades while installing balancing the blades or cleaning the fan WARNING Remove the four rubber packing mounts UU from the fan motor assembly and discard prior to attaching the blades G WARNING Do not insert foreign objects between rotating fan blades G Insert the blade G through the slot in the housing Align the holes in the blade G the blade support plate H and the fan motor assembly F and secure with a blade attachment screw and lock washer CC Repeat this procedure with the remaining blades G amp CC 13 HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Assembly Installing the Light Kit 1 Attaching the light kit mounting plate to the mounting ring
3. Connect the white wire TT from the fan to the white wire BBB marked TO MOTOR N from the receiver EE Connect the blue wire SS from the fan to the blue wire CCC marked For Light from the receiver EE Receiver to house supply wires electrical connections Connect the black hot wire FFF from the ceiling to the black wire DDD marked AC in L from the receiver EE Connect the white neutral wire GGG from the ceiling to the white wire EEE marked AC in N from the receiver EE 11 HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Assembly Hanging the Fan continued 9 Attaching the canopy 8 Installing the canopy Attach the canopy bottom cover to the mounting bracket screw BB heads on the bottom of the canopy B by inserting the screw heads into the key slots in the canopy bottom cover C and rotating the canopy bottom cover C clockwise WARNING Make sure the tab on the mounting bracket A properly sits in the groove in the hanger ball downrod assembly D before attaching the canopy B to the mounting bracket A by turning the canopy housing until it drops into place Make sure connections are neatly tucked in the necessary until the canopy B and canopy bottom cover C Ceiling outlet box PP are snug j NOTE Adjust the mounting bracket screw BB as
4. HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Assembly 1 Preparing the canopy Remove the canopy bottom cover C from the canopy B by turning the canopy bottom cover C counter clockwise Remove the mounting bracket A from the canopy B by removing the non slotted mounting bracket screw BB from the bottom of the canopy B and loosening the slotted mounting bracket screw BB a half turn from the screw head Next turn the canopy B counterclockwise to remove the mounting bracket A from the canopy B A BB Assembling the fan WARNING Failure to properly install the cotter pin LL could result in the fan loosening and possibly falling NOTE If a longer downrod not included is needed take out the screw located in the hanger ball lower the hanger ball and remove the pin Remove all three pieces from the downrod and assemble them onto the new longer downrod before proceeding to the downrod installation Route the wires exiting from the top of the fan motor assembly F through the coupling cover E and the canopy bottom cover C Ensure the slot openings are on top Route the wires through the canopy B and then through the hanger ball downrod assembly D Align the holes at the bottom of the hanger ball downrod assembly D with the holes in the collar on top of the fan motor assemb
5. Remove one of the three light kit mounting plate screws NN from the mounting ring JJJ and loosen the other two screws Do not remove Place the key holes in the light kit mounting plate over the two screws NN previously loosened from the mounting ring JJJ Turn the light kit mounting plate until the light kit mounting plate I locks in place at the narrow section of the key holes Secure by tightening the two mounting plate screws NN previously loosened and the one NN previously removed 14 1 Attaching the LED light kit to the light kit mounting plate CAUTION Before starting installation disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box Turning power off using the fan switch is not sufficient to prevent electric shock Remove one of the three light kit mounting screws 00 from the light kit mounting plate I and loosen the other two screws 00 Do not remove While holding the LED light kit J under the fan motor assembly F make the 2 pin wire connections Red to white Black to black Place the key holes in the LED light kit J over the two mounting screws 00 previously loosened from the light kit mounting plate Turn the LED light kit J until the LED light kit J locks in place at the narrow section of the key holes Secure by tightening the two lig
6. HH Replace the two remote control holder plugs JJ each into its own hole 16 Operation continued REVERSE SWITCH OPERATING INSTRUCTIONS The reverse switch is located on the top of the motor housing Slide the switch to the left for warm weather operation Slide the switch to the right for cool weather operation NOTE Wait for the fan to stop before reversing the direction of the blade rotation Warm weather Counterclockwise Direction A downward air flow creates a cooling effect This allows you to set your air conditioner on a warmer setting without affecting your comfort Cool weather Clockwise Direction An upward air flow moves warm air off the ceiling This allows you to set your heating unit on a cooler setting without affecting your comfort Le cu Care and Cleaning Do Check the support connections brackets and blade attachments twice a year Make sure they are secure Because of the fan s natural movement some connections may become loose over time It is not necessary to remove the fan from the ceiling Clean your fan periodically Use only a soft brush or lint free cloth to avoid scratching the finish The plating is sealed with a lacquer to minimize discoloration or tarnishing Optional Apply a light coat of furniture polish to the wood blades Optional Cover small scratches with a light applicatio
7. Item 593 558 Model YG327B BN USE AND CARE GUIDE ETRIS 52 INCH CEILING FAN Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Hampton Bay Table of Contents Table of Contents 2 Safety Information 3 Warranty 4 4 4 Tools Required eicere 4 Hardware 5 Package Contents 6 IEEE NITUNRE 7 Lcc ulae 8 Hanging the t 9 Attaching the Fan Blades 13 Installing the LED Light Kit 14 Operation eee ccce censes sentono rne nena canda ananasai 16 Remote Control Operating Instructions 16 Installing the Remote Control Holder
8. conductor and the equipment grounding conductor on one side of the outlet box and the ungrounded conductor on the other side of the outlet box All setscrews must be checked and retightened where necessary before installation This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may Cause undesired operation not use this fan with any solid state fan speed control device WARNING To reduce the risk of electrical shock or fire do It will permanently damage the electronic circuitry WARNING To reduce the risk of personal injury do not bend the blade arms also referred to as flanges when installing the brackets balancing the blades or cleaning the fan WARNING Do not insert foreign objects between rotating fan blades WARNING To reduce the risk of fire electric shock or personal injury mount the fan to the outlet box marked acceptable for fan support with the screws provided with the outlet box CAUTION To reduce the risk of personal injury use only the screws provided with the outlet box HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from th
9. ctual size unless noted otherwise in the table below th AA HH L 11 B MM JJ CC B NN E A KK DD GG jJ Part Description Quantity AA Plastic wire nut 9 BB Mounting bracket screw preassembled 2 CC Blade attachment screw and lock washer 16 DD Balance kit not to scale 1 EE Receiver not to scale 1 FF Remote control not to scale 1 GG 12V MN21 A23 battery not to scale 1 HH Remote control holder not to scale 1 ll Remote control holder mounting screw 2 JJ Remote control holder plug preassembled 2 KK Clevis pin preassembled 1 LE Cotter pin preassembled 1 MM Collar setscrew preassembled 2 NN Light kit mounting plate screw preassembled 3 00 Light kit mounting screw preassembled 3 5 HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Pre Installation continued PACKAGE CONTENTS Part Description Quantity Part Description Quantity A Mounting bracket preassembled 1 G Blade B Canopy 1 H Blade support plate 5 C Canopy bottom cover 1 Light kit mounting plate 1 D Hanger ball downrod assembly 1 J LED Light kit 1 E Coupling cover 1 K Glass shade 1 F Fan motor assembly 1 Installation MOUNTING OPTIONS WARNING To reduce the risk of fire electric shock or personal injury mount the fan to an o
10. ds are used between the mounting bracket and outlet box Do not connect the fan with wall mounted variable speed control s The remote control is not working Make sure the dip switches are set correctly Check that all blade and blade arm screws are secure The fan wobbles Most fan wobble problems are caused when blade levels are unequal Check this level by selecting a point on the ceiling above the tip of one of the blades Measure from a point on the center of each blade to the point on the ceiling Rotate the fan until the next blade is positioned for measurement Repeat for each blade Measurement deviations should be within 1 8 in Run the fan for 10 minutes Use the enclosed blade balancing kit if the blade wobble is still noticeable 18 Service Parts v 5 Description Mounting bracket preassembled el E II CC DD KK o Po GG EB OO LJ Description Canopy CC Blade attachment screw and lock washer Canopy bottom cover DD Balance kit Hanger ball downrod assembly EE Receiver Coupling cover FF Remote control Fan motor assembly GG 12V MN21 A23 battery 5 Blades HH Remote control holder 5 Blade support plates Remote control holder mounting screw Light kit mounting plate JJ Remote control holder plug preas
11. e factory for a period of lifetime after the date of purchase by the original purchaser We also warrant that all other fan parts excluding any glass or acrylic blades to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned To obtain warranty service you must present a copy of the receipt as proof of purchase All costs of removing and reinstalling the product are your responsibility Damage to any part such as by accident misuse improper installa tion or by affixing any accessories is not covered by this warranty Because of varying climatic conditions this warranty does not cover any changes in brass finish including rusting pitting corroding tarnishing or peeling Brass finishes of this type give their longest useful life when protected from varying weather conditions A certain amount of wobble is normal and should not be considered a defect Servicing performed by unauthorized persons shall render the warranty invalid There is no other express warranty We hereby disclaim any and all warranties including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law The duration of any implied warranty which cannot be disclaimed is limited to t
12. he time period as specified in the express warranty Some states do not allow limitation on how long an implied warranty lasts so the above limitation may not apply to you The retailer shall not be liable for incidental consequential or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law Some states do not allow the exclusion of incidental or consequential damages so the above exclusion or limitation may not apply to you This warranty gives specific legal rights and you may also have other rights which vary from state to state This warranty supersedes all prior warranties Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer Contact the Customer Service Team at 1 855 HD HAMPTON or visit www hamptonbay com Pre Installation SPECIFICATIONS Fan size Speed Volts Amps Watts RPM CFM N W G W C F 0 30 11 47 69 1674 19 52 in id 120 0 43 27 68 118 297018 279098 983K05 nig bull i i 19 25 Ibs 21 851b High 0 56 67 02 187 5317 74 NOTE These are approximate measures They do not eih include amps and wattage used by the light kit ew 05 Intertek TOOLS REQUIRED CD Phillips Fiat blade Step Wire Electrical screwdriver screwdriver ladder stripper tape Pre Installation continued HARDWARE INCLUDED NOTE Hardware shown to a
13. ht kit mounting screws 00 previously loosened and the one 00 previously removed Assembly Installing the Light Kit continued 1 3 Installing the glass shade Raise the glass shade K up against the light kit J and secure the glass shade K to the fan by turning the glass shade K clockwise until snug DO NOT OVERTIGHTEN HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Operation REMOTE CONTROL OPERATING INSTRUCTIONS Install the 12V MN21 A23 battery GG included into the remote control FF To prevent damage to the remote control FF remove the battery if not used for long periods Restore power to the ceiling fan and test for proper operation HI MED LOW buttons set the fan speed OFF button turns the fan off GG aK button turns the light on or off and also controls the brightness setting Press and release this button to turn the light on or off Press and hold the button to set the desired brightness The light button has an auto resume it will stay at the same brightness as the last time it was turned off INSTALLING THE REMOTE CONTROL HOLDER Remove the two remote control holder plugs JJ from the remote control holder HH Note that the plugs have unique tabs that allows them to fit only in one hole Attach the remote control holder HH with the two remote control holder mounting screws Il
14. ly F Carefully insert the clevis pin KK through the holes in the collar and the hanger ball downrod assembly D Be careful not to jam the clevis pin KK against the wiring inside the hanger ball downrod assembly D 2 Preparing the motor Remove the clevis pin KK and cotter pin LL and loosen the two collar setscrews MM from the fan motor assembly F collar Insert the cotter pin LL through the hole near the end of the clevis pin KK until it snaps into the locked position Firmly tighten the two collar setscrews MM on top of the fan motor assembly F Assembly Hanging the Fan Attaching the mounting bracket to the electrical box Hanging the fan from the mounting bracket WARNING To reduce the risk of fire electric shock or other personal injury mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box the hanger ball downrod assembly D Failure to properly seat the tab in the groove could cause damage to the wiring WARNING The tab the ring must rest the groove of Pass the 120 volt supply wires through the center hole in the mounting bracket A Attach the mounting bracket A to the outlet box PP with the screws and washers provided with the outlet box PP Securely tighten the
15. n of shoe polish Do not Use water when cleaning Water could damage the motor or the wood or possibly cause an electrical shock Apply oil to your fan or motor The motor has permanently lubricated sealed ball bearings HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Troubleshooting WARNING Make sure the power is off at the electrical panel box before you attempt any repairs Refer to step 7 Making the Electrical Connections on page 11 Problem Solution Check the main and branch circuit fuses or breakers Check the line wire connections to the fan and switch wire connections in the switch housing The fan will not start Check to make sure the dip switches from the remote control and receiver are set to the same frequency Make sure all motor housing screws are snug Make sure the screws that attach the fan blade arm to the motor hub are tight Make sure the wire nut connections are not rattling against each other or the interior wall of the switch housing Allow a 24 hour breaking in period Most noises associated with a new fan disappear during this time The fan sounds noisy Make sure there is a short distance from the ceiling to the canopy It should not touch the ceiling Make sure your Ceiling box is secure and that rubber isolator pa
16. receiver EE facing the ceiling 10 Assembly Hanging the Fan continued 7 Making the electrical connections If your outlet box PP has a ground wire HHH green m erui dunes T inis af or bare copper connect it to the fan ground wires III Oe Une tu ere otherwise connect the hanger ball downrod assembly between the remote control and the fan s receiving unit D ground wire to the mounting bracket A Secure each wire connection with a plastic wire nut AA provided with the electrical hardware CAUTION Do not use with a wall light dimmer switch i After connecting the wires spread them apart so that the green and white wires are on one side of the outlet box PP and the black and blue wires are on the other side Carefully tuck the wire connections up WARNING Check to see that all connections are tight into the outlet box PP including ground and that no bare wire is visible at the wire nuts except for the ground wire Follow the steps below to connect the fan to your household wiring Use the plastic wire nuts AA with your fan Secure the wire nuts AA with electrical tape Make sure there are no loose strands or connections Motor to receiver electrical connections Connect the black wire RR from the fan to the black wire AAA marked TO MOTOR L from the receiver EE
17. sembled LED Light kit KK Clevis pin preassembled Glass shade LL Cotter pin preassembled Plastic wire nut MM Collar setscrew preassembled 2 2 11 Mounting bracket screw preassembled NN Light kit mounting plate screw preassembled 00 Light kit mounting screw preassembled HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM Retain this manual for future use YG327B000001 Y
18. two mounting screws Carefully lift the fan motor assembly F up to the mounting bracket A and seat the hanger ball downrod assembly D in the mounting bracket A socket Make sure the tab on the mounting bracket A socket is properly seated in the groove in the hanger ball downrod assembly D This will help to balance the ceiling fan HAMPTONBAY COM Please contact 1 855 HD HAMPTON for further assistance Assembly Hanging the Fan continued Preparing the receiver and remote control WARNING To avoid possible electrical shock be sure electricity is turned off at the main fuse box before wiring CAUTION Do not use with a wall light dimmer switch If you feel you do not have enough electrical wiring knowledge or experience have your fan installed by a licensed electrician This remote control unit is equipped with 16 code combinations to prevent possible interference from or to other remote units The frequency switches on your receiver EE and remote control FF have been preset at the factory Please recheck to make sure the switches on the remote control FF and the receiver EE are set to the same position Any combination of settings will operate the fan as long as the switches in the remote control FF and receiver EE are set to the same position After checking the switches insert the receiver EE into the mounting bracket A with the flat side of the
19. utlet box marked acceptable for fan support using the screws provided with the outlet box An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced If in doubt consult a qualified NOTE You may need a longer downrod to maintain proper blade clearance when installing on a steep sloped ceiling m The maximum angle allowable is 18 away from horizontal If the canopy B touches the hanger ball downrod assembly D then remove the decorative canopy bottom cover C and turn the canopy B 180 before attaching the canopy B to electrician the mounting bracket A If your ceiling fan does not have an existing UL listed mounting box then install one using the following instructions QQ Disconnect the power by removing the fuses or turning off the circuit breakers Secure the outlet box PP not included directly to the building structure Use appropriate fasteners and materials not included The outlet box and its bracing must be able to fully support the weight of the moving fan at least 35 Ibs Do not use a plastic outlet box The illustrations below show three different ways to mount the outlet box PP not included PP N a PP To hang your fan where there is an existing fixture but no ceiling joist you may need an installation hanger bar PP not included as shown above
Download Pdf Manuals
Related Search