Global Direct 21828 Installation Guide
Contents
1. STYLE NO 21828 Part and Hardware List Chandelier Assembly 1PC Glass 1PC Cross Bar 1PC Outlet box screws 2PCS Pre Threaded Pipe 1PC Hex Nut 1PC Pre Threaded Ring 1PC STYLE 21828 Collar loop ize ILLUSTRATION Wire Nut 2PCS set f Pa Chain 1PC ae Quick Link 2PCS Please make sure that you have all the parts indicated before you begin assembly of this item Please read Wiring Instructions before you begin assembly and installing your Chandelier aaa WARNING BEFORE INSTALLING Make sure electricity supply is i acres E shut off to avoid a possible electric shock CLEANING This item has a lacquered and baked finish When cleaning only use a soft dry cloth Do not use liquid cleansers or abrasives as they may damage the finish TAS LQ MMoO mw gt Colar loop gt F 4 p Assembly Instructions f TEET 1 Carefully remove the parts and hardware from the carton Ne 2 Fasten the Cross Bar C to the outlex box using the Outlet box Screws D 3 Insert the shorter end of the Pre Threaded Pipe E into the pre drilled hole in the Cross Figure 3 Bar C and secure with the Hex Nut F See Illustration Diecramme 8 4 Attach the Collar loop H to the exposed end of the Pre Threaded Pipe E and secure by turning in a clockwise direction 5 Slip the Pre Threaded Ring G first and then the Canopy I over the other end of the Chain k 6 Attach the Quick Link L to two b2. itter end of the Chain K 7 Attach the Quick Link on one end of the Chain to Collar loop H 8 Attach the Quick Link L on other end of the chain K to the loop of the chandelier Assembly 9 Lace the wire through every link of the chain through the collar and up through the Pre Threaded Pipe E See Illustration 10 Place the white ribbed or tinted wire evenly against the white wire from the outlex box and place the black smooth or un tinted wire evenly against the black wire from the outlet box Connecting the Wire See Figure2 11 Install the ground wire in the Cross Bar with the green screw supplied 12 After the wires are connected tuck them carefully inside the outlet box Place Canopy I over the outlet box and secure with Pre Threaded Ring G 13 Attach the Glass B onto the socket of Chandelier Assembly A and secure by turning in a clockwise direction See Illustration R 14 Install 100 Watt Type A bulbs sold separately into the sockets of the fixture Socket Ring u N Type A 100W Not Included
Download Pdf Manuals
Related Search