the great outdoors by Minka Lavery 72432-261 Instructions / Assembly
Contents
1. Align the back plate E to screws A and secure it Circular Strap with cap nuts F Ground Screw 9 To prevent moisture from entering the outlet box and Mounting Screw causing a short use clear silicone sealant to outline the outside of fixture back plate E where it meets the Fig 3 wall leaving a space at bottom to allow moisture a means to escape Fig 4 WIRES WRES S WIRES 10 Install the light bulbs not included in accordance Smoon Ee Ped iB Core with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Neutral Ground FIXTURE FIXTURE FIXTURE WIRES WIRES L gt WIRES Your installation is now complete Return power american and test the fixture lighting association Caulking Intertek Backplate Note Illustration Fig 1 Fig 2 on this manual is for installation purposes only It may or may not be identical to the fixture purchased2. INSTALLATION INSTRUCTIONS Item 72432 261 READ AND SAVE THESE INSTRUCTIONS AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR ASSEMBLING THE FIXTURE Fig 1 1 Insert front glass J into door I and secure with clips k 2 Insert back glass L and side glass M into lamp body G and secure with clips H MOUNTING THE FIXTURE Fig 2 3 Shut off the power at the fuse box or circuit breaker If necessary remove the old fixture including the mounting hardware 4 Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration 5 Thread screws A into the pre drilled holes in the circular strap C spaced the same distance apart as the holes in the back plate of the fixture body and secure with hex nut B 6 Attach the circular strap C to the junction box using the mounting screws D size 8 32N L0 5 The side of circular strap C marked GND must face out CONNECTING THE WIRES Fig 3 7 At this point connect the fixture wires as shown in Fig 3 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the circular strap C using the green screw provided After the wires are connected tuck them carefully inside the outlet box FINISHING THE INSTALLATION Fig 2 Set A 020 8
Download Pdf Manuals
Related Search