Kenroy Home 32442NWG Installation Guide
Contents
1. ET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS AVAILABLE PARTS ARE THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS HARP9 HARP WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK 32442SHNWG SHADE OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLU G 02 2014 32442NWG INSTRUCTIONS2. MODEL 32442NWG PACKING DIAGRAM ARDBOARD CA TITLE 20 STYROFOAM 12 KGS ARDBOARD MP BODY SOCKET ASSEMBLY ARDBOARD FINIAL HARP amp RUBBER STYROFOAM 12 KGS QO FINAL ASSEMBLY INSTRUCTIONS asss READ AND SAVE THESE INSTRUCTIONS WASHER READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE SHADE ASSEMBLY DIAGRAV 32442SHNWG REPLACEMENT PART 3 SCREW THE SOCKET ASSEMBLY TO TOP OF THE LAMP BODY k a 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO REPLACEMENT ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 2 PULL THE EXCESS POWER CORD THROUGH THE BASE 5 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO THE SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SOCKET SWITCH amp BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCK
Download Pdf Manuals
Related Search