Sea Gull Lighting 94749-71 Installation Guide
Contents
1. locator D and set aside support C onto stem B and secure in place by tightening set 2 Slide socket locator D onto stem B Secure the socket locator screw with supplied allen wrench D at desired height with supplied allen wrench 2 Pull cable A through glass and place glass on glass support C Secure the threaded ring C to the socket locator D so it rests evenly Pull cable A from bottom of glass through top opening in glass 5 Glass should rest on retaining ring Po LR 150 continued CABLE A SPIDER C SOCKET LOCATOR E SPIDER A RETAINING RING D SOCKET B STEM B SOCKET FIGURE 4 FIGURE 6 1 Remove retaining ring D from locator E and set aside 1 Spider A should rest on top of socket B You will need to 2 Slide the socket locator onto stem B Secure the socket locator remove wiring connections at splice compartment if applicable E with the allen wrench to the desired length on the stem B or remove wire from mono point canopy 3 Secure the threaded ring D to the socket locator E 2 Place glass on spider A so it rests evenly 4 Slide spider C onto stem B and fit on top of retaining ring D 5 Pull cable A from bottom of glass through top opening in glass lt CABLE A STEM C GLASS SUPPORT B SOCKET LOCATOR E GLASS SUPPORT B a RETAINING RI2. AN Installation And Safety Instructions LR 150 Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to this fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM 040909 ASSEMBLY 1 See fixture instruction sheet for disassembly of pendant before installing glass 2 Determine what part bag you are using SPIDER A PART BAGS PART BAG A Figure 1 AMBIANCE RETAINING L Glass Supporter PART BAG B Figure 2 Support SCREWS B STEM SUPPORT C PART BAG C Figure 3 A Socket Locator Retaining Ring PART BAG D Figure 4 SOCKET FIGURE 2 A Socket Locator Retaining Ring JT spider 1 Bring the socket and stem through the top of glass Bring spider A over socket and secure by threading retaining screws B PART BAG E Figure 5 through glass into spider A Nig 2 Set support at desired location on stem and secure by tightening Glass Supporter set screw with allen wrench PART BAG F Figure 6 Spider PART BAG G Figure 7 T Weiss Supporter g Socket Locator Retaining Ring e CABLE A CABLE A STEM B GLASS SOCKET SUPPORT C LOCATOR D RETAINING RING C STEM B SOCKET E FIGURE 1 FIGURE 3 k 1 Determine desired location for glass to hang Place glass Remove retaining ring C from socket
3. NG D STEM C FIGURE 5 FIGURE 7 1 Slide glass support B through cable A and onto stem C 1 Remove retaining ring D from socket locator E and set aside 2 Pull cable A through bottom of glass so glass rests securely in 2 Slide the socket locator E onto stem C Secure the socket glass support B locator E with the allen wrench to the desired length on the stem B 3 Secure the retaining ring D to the socket locator E 4 Rest glass support B on top of socket locator E and retaining ring D 5 Place glass on top of glass support B FINAL ASSEMBLY 1 Reassemble pendant according to pendant instructions
Download Pdf Manuals
Related Search