Minka Lavery 971-138 Instructions / Assembly
Contents
1. Knurled Cap Neutral D 2 Install glass shade E by referring to fig 1 3 Install light bulbs in accordance with fixtures specifications DO NOT EXCEED MAXIMUM WATTAGE RATING american Your installation is now complete Return power to the lighting a association junction box and test the fixture a Listed MIN 90 C SUPPLY CONDUCTORS2. INSTALLATION INSTRUCTIONS For Model 970 1 138 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE BACKPLATE Fig 1 1 Shut off the power at the circuit breaker and remove old fixture including the crossbar 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation 3 Attach the crossbar A to the outlet box using two outlet Box Screws B The side of the Crossbar marked GND must face out 4 Thread the nipple C part way into the center hole of the crossbar CONNECTING THE WIRES Fig 2 1 At the point connect the electrical wires as follows Connect the black wire from the fixture to the black house hot wire a om Connect the white wire from the fixture to the white neutral i house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet has a ground wire green or bare copper connect fixture s ground wire to it Otherwise connect fixture s ground wire directly to Fig 2 FIXTURE FIXTURE i FIXTURE the crossbar using the green screw provided WIRES ee WIRES L gt WIRES c gt acK or i ite or Fi are MOUNTING FIXTURE AND SHADE Smooth INA Ribbed Fee RRE 1 After the wires are connected tuck them carefully inside the outlet box as you place the Backplate F over the nipple C WIRES i Whit Secure the Backplate F against the wall using
Download Pdf Manuals
Related Search