Minka Lavery 6814-66 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTION FOR 6814 66 6814 84 For Wall Mount Light Fixtures PREPARATION 1 Shut off power at the fuse box or circuit breaker box If necessary Remove old fixture and all mounting hardware from wall junction box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to loose any small parts necessary for installation MOUNTING THE FIXTURE Fig 1 3 Position the circular strap B through the fixing holes onto the wall and make marks drill pilot _ holes for wood screws C into the wall then insert the plastic anchor A into the holes Secure circular strap B to outlet box not provided with outlet screws D then secure the K outlet box with wood screws C into plastic anchors A in the wall NOTE The holes of the circular strap with anchors must be upward Fete THE WIRES Fig 2 5 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure and do not easily pull off with a slight tug If there is no Green Ground Wire from the junction box connect the Fixture Ground Wire to the Circular Strap with the Green Screw provided 6 Tuck these wire connections neatly into the wall junction box COMPLETING THE INSTALLATION 7 Raise the mounting base E allowing for the mounting screws F to protrude through the holes on the mounting base E and then secure with screws F by w2. rench 8 Place the glass G over the socket H and secure with the retaining ring 1 9 Install the proper light bulbs for your fixtures DO NOT EXCEED THE SPECIFIED WATTAGE Return the power to the junction box and test the fixture Your installation is now complete WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER HOUSE WIRES Black Hot FIXTURE 1 WIRES 1 White HOUSE WIRES White Neutral FIKTURE 1 Copper Ground f 4 HOUSE 1 WIRES Green or 1 Dare Copper Ground
Download Pdf Manuals
Related Search