Minka Lavery 6811-66 Instructions / Assembly
Contents
1. teoma COMPLETING THE INSTALLATION Fig 1 i KA 7 Raise the mounting base E allowing for the A V pouse house House mounting screws F to protrude through the holes s Best wie ni Ho eura noro Coppotoround on mounting base E and then secure with th mounting screws F by wrench i 8 Place the glass I over the socket G and secure with the retaining ring H 9 Install the proper light bulb for your fixture O NOT EXCEED THE SPECIFIED WATTAGE Return the power to the junction box and test the fixture Your installation is now complete2. INSTALLATION INSTRUCTION FOR 6811 66 6811 84 For Wall Mount Light Fixtures MWARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER PREPARATION Fig 1 1 Shut off power at the fuse box or circuit breaker box If necessary Remove old fixture and all mounting hardware from wall junction box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to loose any small parts necessary for installation MOUNTING THE FIXTURE Fig 1 3 Position the circular strap A through the fixing holes onto the wall and make marks drill pilot holes for wood screws B into the wall then insert the plastic anchor D into the holes 4 Secure circular strap A to outlet box not provided with outlet screws C then secure the outlet box with wood screws B into plastic anchors D in the wall NOTE The holes of the circular strap with anchors must be upward CONNECTING THE WIRES Fig 2 L 5 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure and do not easily pull off with a slight Fig 2 tug If there is no Green Ground Wire from the A 1 junction box connect the Fixture Ground Wire to Procure t gt pomure Le FIXTURE cL the Circular Strap with the Green Screw provided vee wae Gooner 6 Tuck these wire connections neatly into the wall r i EET junction box g
Download Pdf Manuals
Related Search