Sea Gull Lighting 94732-71 Installation Guide
Contents
1. INSTALLATION AND SAFETY INSTRUCTIONS CAP C RAIL ADAPTER E FIGURE 1 IMPORTANT SAFETY INSTRUCTIONS INSTALLATION e Be sure the electricity to the system you are working on is turned NOTE This fixture has an integral 12v transformer off either the fuse removed or the circuit breaker set at off 1 Install 12v MRC16 50 watt lamp not supplied e For use with the 120V Transitions track series by 2 Unthread cap C from rail adapter E Sea Gull Lighting 3 Making sure contacts A will align with conductors B on e Caution To reduce the risk of burn during relamping remove from the track before relamping e f you are unclear as to how to proceed contact a qualified electrician e Minimum distance from the front of the lamp to combustible surfaces is 8 e Make sure all connections are tight e Dimming halogen lamps greatly reduces lamp life e To reduce the risk of FIRE or INJURY TO PERSONS Turn off and allow to cool before replacing lamp e Lamp gets HOT quickly Contact switch only when turning on e Do not touch hot lens guard or enclosure e Do not touch the lamp at any time Use a soft cloth Oil from skin may damage lamp e Do not operate the luminaire fitting with a missing or damaged shield e Save these instructions FIXTURE INSTALLATION CORRECT INCORRECT CONTACTS A CONTACTS A CAP S rail set the bottom of rail adapter E to the bottom o2. f the rail and roll rail adapter E up onto the rail Fig 2 4 Close the hinged door of rail adapter E over the rail and thread cap C back onto rail adapter E AMBIANCE LIGHTING SYSTEMS E lt LRG CONDUCTOR B CONDUCTOR B sahti FIGURE 2 a www SeaGullLighting com
Download Pdf Manuals
Related Search