Pure Garden 50-0005 Instructions / Assembly
Contents
1. ASSEMBLY INSTRUCTIONS Step 1 Locate the white plastic tube from the fountain top into the hole 1 in the bowl and gently push down Step 2 Place the pump in the water resovoir Connect the tubing to the outlet of pump Step 3 Run the cable through the hole 3 of the bowl Step 4 Now simply fill with clean water and plug into a main outlet Tf in doubt about any eletrical connections please consult a qualifiled electrician WARNING Be careful not to spill water onto the plut of the pump DO NOT allow the pump to run dry SAFETY PRECAUTIONS This fountain is intended for outdoor use only Place the fountain in a location where any water spills or splashing will not reach any other electrical equipment or cause damage Choose an appropriate location before installing the fountain DO NOT lift or push drag the water basin to relocate the fountain when it s filled with water Empty the water basin before lifting Excessive weight or pressure on any of the fountain sections may cause it to tip or fall over Keep pets and children away from any of the fountain sections Some splashing may occur To avoid injury from electrical shock observe basic safety precau tions and comply with the following instructions The pump on your fountain has no user serviceable parts Only an authorized service representative should service the pump Do not open the sealed pump housing as this may result in electrical shock Refer to enclosed p2. ump maintenance guide for cleaning TROUBLESHOOTING 1 If your FOUNTAIN PUMP fails to operate please check the following a Make sure the pump is it plugged into the socket properly b Check the water level in the fountain Running the pump without sufficient water can damage the pump c Check the setting of the flow control on the pump Check the pump outlet nozzle and the water tube for dirt and debris Clean if necessary d Make sure the pump is connected to the water tube tightly Check the fountain tubing for kinks and obstructions e The pump may be air locked Plug and unplug the pump several times to clear any air that may have been trapped 2 If the water does not flow out of the fountain it may be caused by kinked or loose water tubes make sure water tubes are connected properly
Download Pdf Manuals
Related Search