HOUZER LHD-3322-1 Installation Guide
Contents
1. tighten screw on Hose Connecter G1 Warming tubing with warm water will aid in tube flexibility and a small amount of Vaseline or similar on plastic overflow casting will aid in installing tube to fitting 7 Line up Waste End Casting D with overflow drain opening on sink After Applying Teflon paste to mack washer E it should be placed between sink and Waste End Casting D as shown in diagram 8 Install Pop up drain as per instructions with your chosen drain not included Make sure input on Waste End Casting D is lined up with output on Overflow Casting C 9 Trim Flex Hose F to proper length needed to attach to input on Waste End Casting D Teflon paste or Vaseline placed on outside of waste end casting fitting will ease hose installation Warming hose will aid in tube flexing 10 After placing tightening Hose Connecter G2 on Flex Hose F Slide hose on Waste End Casting D and tighten screw on Hose Connecter G2 11 Tighten all loose fittings and installation is complete B Washer c C Overflow Casting G1 Hose Connector F Hose E Rubber Washer D Waste End Casting Care and Maintenance Hammerwerks Copper amp Pewter products have a living finish meaning they will oxidize and develop a beautiful patina of varying hues over time and usage Here are some guidelines to help keep your Hammerwerks products clean amp healthy2. HOUZER www HouzerSink com Hand Hammered Copper Sinks www HouzerSinks com General Recommendations Please Read installation and maintenance instruction thoroughly Be sure to use proper tools and always wear personal safety devices for your protection Tools and Materials needed Tape Measure Hacksaw Jigsaw Silicone Adhesive Sealant Pencil NOT ink Ear Protection Eye Protection Rags Be sure to use proper tools and always wear personal safety devices for your protection Installation Instructions Please carefully read complete instructions before beginning installation Note These instructions are for installation with solid surface composite material countertops Houzer recommends professional countertop installers and is not responsible for damages to the countertop or sink during installation 1 Place sink bowl down on a level surface with protection to avoid scratching the sink finish 2 Disassemble overflow unit 3 Take overflow Grill Plug A and insert thru overflow hole from inside sink to outside Beware not to damage finish on sink or overflow grid 4 Apply Teflon paste to grill plug rubber gasket B and place on Grill Plug A to outside surface of sink 5 Thread plastic Overflow Casting C to Grill Plug A making sure you do not crimp Rubber Gasket B Leave Loose A small amount of Vaseline or similar on threads can ease installation 6 Attach Flex Hose F to Overflow Casting C amp
3. e Regularly clean with mild soap and water using a soft cloth or sponge e When not in use keep fixture clean and dry and free of soap residue or water spots Do not use abrasive cleaners or cloths Do not use caustic drain openers Flitz brand Faucet amp Fixture Wax may be used periodically for an extra layer of protection
Download Pdf Manuals
Related Search