Home
Vinotemp VT-SHOTCHILLER2 Use and Care Manual
Contents
1. P LOUIE Vinotemp Shot Chiller Dispenser Setup and Cleaning Instructions Drink Responsibly THE FOLLOWING PARTS ARE SUPPLIED af RUBBER BOOT coun 7 SHOT CHILLER SMALL MEDIUM AND LARGE BTL ALES SUPPORTS c TRANSFORMER CONVERTER e k Pre chill the bottle of liquor you will be dispensing in your Shot Chiller dispenser in the freezer PA Choose the bottle adapter that best fits the type of bottle you are dispensing This is done by placing the bottle upright and then choosing the adapter that allows the tip of the bottle to extend past the bottom of the adapter approximately 1 2 to 3 4 Put the adaptor on the shoulder of the bottle you are using 3 Fill the reservoir with the freezer chilled liquor approximately 1 2 from top of the reservoir It will hold a whole 750 ML bottle 4 Next either a Place the adapter on the Shot Chiller and then place a freezer chilled bottle of liquor in the adapter for display and additional reserve b Place the reservoir cover on the reservoir 5 Plug the power supply into the Shot Chiller and then into a 120V AC electrical outlet When plugging the adapter into the socket of the chiller make sure the groove is facing the correct position FACING DOWN 6 You are now ready to dispense below freezing chilled shots I Note The Shot Chiller was designed to maintain your liquor at below freezing temperatures while dispensing if you fill the Shot Chiller w
2. ith warm liquor it should be allowed to chill overnight 8 Do not place a warm bottle of liquor in the dispenser unless you allow it to chill overnight 9 If the Shot Chiller is to be left running be sure the reservoir is full otherwise unplug your Shot Chiller dispense all the liquor and dry the reservoir with a soft cloth CLEANING Unplug the unit drain and rinse the reservoir by opening the faucet and rinsing with water Do not get power section wet Dry thoroughly with soft cloth NOTE When plugging the adapter into the socket of the chiller make sure the groove is facing the correct position FACING DOWN CHOOSING PROPER BOTTLE SUPPORT OR THE UNIT WILL BECOME HOT Install bottle support upside down on the bottle If bottle extends too far past the support the reservoir will not fill to proper capacity If bottle does not extend past support lip and into the reservoir the liquor will over fill and spill onto counter FOR PROPER FIT BOTTLE MUST EXTEND PAST THE LIP OF THE RESERVOIR APPROXIMATELY 1 2 CORRECT INCORRECT WWW VINOTEMP COM
Download Pdf Manuals
Related Search
Related Contents
SEA RECEPTEUR BI CANAUX STYLE TYPE STYLO Fisher-Price 71985 Instruction Sheet Evolver 500 Series Dual Purge Robotic Applicator 本文(一括)(338頁・2250KB) V2/0214 - Bartscher GmbH 「大切な人」をちゃんと見守っている。 その安心感が、 あなた Northwood - ITS Networking & Telecommunications bedienungsanleitung Copyright © All rights reserved.
Failed to retrieve file