GE JX36BES Installation Guide
Contents
1. Installation Filler Panel Kit Instructions JX36 FOR 36 INSTALLATIONS TOOLS YOU WILL NEED JX36B CVM1750 CVM1790 PVM9179 Philips screwdriver CSA1201 PSA9120 PSA9240 JX36C JVM6170 JNM6171 JVM6172 JVM6175 JVM6177 JX36D JVM7195 DVM7195 JNM7196 PVM9195 PNM9196 PVM9215 PARTS INCLUDED e Trim kit side mount 2 Installation screws 2 yt e Connecting Bar 1 49 40720 1 10 14 GE Installation Instructions Install the OTR bracket according to OTR iH Installation Instructions NOTE This kit is best installed with 12 base cabinets Cabinets with greater than a 12 base may have a larger gap between back wall and kit NOTE Ensure the OTR and the Cooking Product installation manuals are followed OTR Bracket KIT INSTALLATION 7 Make adjustments so the side panel is in line with the front of the microwave case 1 Place the microwave on a flat surface where you can work on the bottom of both sides 2 Remove all 3 pieces from the package right panel left panel top brace 3 Remove the screws from the lower back of the microwave 4 With the short edge of the side trim to the back of the left side of the microwave and using the screw you just removed attach the side trim to the back of the microwave Flush with front of microwa2. ve case 8 Repeat the same procedure for the other side 9 Using the 2 flat head screws provided attach the top brace to the 2 side panels to pull both panels together 5 Your microwave will have one or two screws on the bottom left side Remove these screws to create a gap between the bottom plate and the case of the microwave L 6 Slide the lower lip of the side panel inside the gap U SS 1 between the bottom plate and the case Attach using the screws you removed in step 5 10 Install the over the range microwave with side panels into the 36 opening NOTE Make sure you have installed the mounting wall bracket in the center of the 36 opening per the installation instructions provided with your microwave Printed in USA 5
Download Pdf Manuals
Related Search