ProTeam 107128 Instructions / Assembly
Contents
1. ELECTRICAL CORD CARE When vacuuming is complete unplug the cord and wrap it around the motor cover If the power cord is damaged it must be replaced by the manufacturer or their service agent or by similarly qualified personnel to reduce the risk of accident NEVER stretch the cord tightly between the Vacuum and the outlet A cord that is stretched or pulled will not function properly and creates a danger After vacuuming unplug the cord and wind it up as described on page 12 DO NOT wind up the cord wrapping it around your hand and elbow Use only the designated ProTeam replacement cord Reference Important Safety Instructions item number 17 Cord jacket type should be SJTW or better CARTON CONTENTS OVERVIEW e 4 Gallon Wet Dry Vacuum 1 e 4 Casters 2 Qwik Lock Fine Dust Cartridge Filter 3 Crevice Tool 8 Dust Brush 9 Claw Nozzle 10 Diffuser 11 Floor Brush Insert 5 Squeegee Insert 6 Carpet Insert 7 Curved Wand 13 Hose Assembly 14 Master Floor Tool 4 e Straight Wand 12 e Owner s Manual 15 ProTeam 5 PREPARATION FOR OPERATION GETTING STARTED This Wet Dry Vacuum is intended for commercial use It may be used for light vacuuming of wet or dry media and may be used as a blower The lightweight design allows usage for most small vacuuming chores Familiarize yourself with the following product and features and read the entire manual for specific usage2. of your new Wet Dry Vacuum Familiarize yourself with the controls and features of your Wet Dry Vacuum before operating Figure A Handle Power Head Casters ower Tank Latch W p Cord Figure A CASTER ASSEMBLY 1 Turn the tank upside down on the floor Caster Stem 2 Insert the caster stem into the socket Caster Ball on the bottom of the tank as shown 4 places Figure B 3 Push the caster until the ball on the Tank caster stem is inserted all the way Be into the socket You will hear the ball snap into the socket and the caster will swivel easily when positioning is correct 4 Turn the tank upright ER 6 ProTeam
Download Pdf Manuals
Related Search