Zinsser 2861 Use and Care Manual
Contents
1. or implied as to the performance of these products As conditions and use of our materials are beyond our control we can guarantee these products only to conform to our standards of quality and our liability if any will be limited to replacement of defective materials All technical information is subject to change without notice T Rust Oleum Corporation Form GDH 150 RU ST OLEU M 11 Hawthorn Parkway Phone 877 385 8155 Rev 082613 Vernon Hills Illinois 60061 www rustoleum com BRANDS An RPM Company2. TECHNICAL DATA SUG 10 SUREGRIP SEAM amp REPAIR ADHESIVE ZINSSER QUALITY SINCE 1849 DESCRIPTION AND USES PRODUCT APPLICATION cont Rust Oleum SureGrip Seam amp Repair Adhesive is a seam adhesive designed to seal down stubborn curling loose edges seams tears and overlaps It bonds strong and tacks fast yet strips easily without damaging walls SureGrip Sea amp Repair Adhesive is not intended for use where oil or grease is present or over silicone wax coated surfaces or non stick surfaces treated with Teflon Tedlar and similar non stick coatings PERFORMANCE CHARACTERISTICS e Seals sown loose seams stubborn curling edges tears and overlaps e Grips in 10 seconds e Dries clear non staining e Easy water cleanup PRODUCTS SKU Container Size 02861 2 ounce tube PRODUCT APPLICATION APPLICATION Use only when temperature is between 50 100 F 10 38 C Adhesive is ready to use Apply a thin coat under edges Make sure the adhesive gets back into areas where the wallcovering starts to separate from the surface For separated seams dampen the front and back of loose wallcovering or border with a damp sponge Wait 5 minutes before applying adhesive Smooth until flat If the edges are curled press down and hold for 10 seconds Avoid contact with the surface of embossed or delicate wallcovering DRY TIME Drying time will vary depending on the wallcovering type
3. temperature ventilation and humidity in the room CLEAN UP Remove excess adhesive on or around the wallcovering or border immediately with a clean damp sponge or cloth Blot dry with a soft towel Additional effort may be required if adhesive is allowed to contact the surface of embossed or textured vinyl Close tube tightly after each use TOOL CLEAN UP Clean tools with warm water STORAGE Protect from freezing Always keep the container tightly closed and store in a cool dry place at temperatures between 40 100 F 4 38 C Normal storage life is one year The disposal of excess or left over product should conform to local laws regarding water based products Form GDH 150 Rev 082613 TECHNICAL DATA ZINSSER SUREGRIP SEAM amp REPAIR AHDESIVE PHYSICAL PROPERTIES aan Solvents Appearance Volatile Organic Compounds 0 g l when mixed with water Practical Coverage at Recommended Varies depending on porosity and application method DFT assumes 15 material loss Dry Times at 70 80 F 21 27 C and Drying time will vary depending on the wallcovering type temperature ventilation 50 Relative Humidity and humidity in the room Shelf Life Flammability Non flammable Safety For additional information see MSDS The technical data and suggestions for use contained herein are correct to the best of our knowledge and offered in good faith The statements of this literature do not constitute a warranty express
Download Pdf Manuals
Related Search