Rust-Oleum Stops Rust 285092 Use and Care Manual
Contents
1. within 1 hour or after 48 hours CLEAN UP Wipe off tip before storing Clean up wet paint with xylene or mineral spirits Properly discard empty container Do not burn or place in home trash compactor CLOGGING If the valve clogs twist and pull off spray tip and rinse ina solvent such as mineral spirits Do not insert any object into can valve opening STOPS RUST ENAMEL SPRAYS Form GDH 678 Rev 013015 Promina TECHNICAL DATA RUST OLEUM eD STOPS RUST ENAMEL SPRAYS ENAMEL SPRAY FINISHES Resin Type Oil modified Alkyd Pigment Type Varies with color Solvents Acetone N Butyl Acetate Aromatic Hydrocarbons MIR 1 4 Max Fill Weight 12 ounces Recommended Dry Film Thickness 1 0 2 0 mils DFT Per Coat 25 50p Practical Coverage at Recommended 10 12 sq ft can DFT assumes 15 material loss 0 9 1 09 m can Dry Times at 70 80 F Touch 2 4 hours 21 27 C and 50 Relative Humidity randig 5 9 hours Recoat Before 1 hour or after 48 hours Dry Heat Resistance 200 F 93 C Shelf Life 5 years Flash Point 156 F 104 C Safety Information For additional information see MSDS The technical data and suggestions for use contained herein are correct to the best of our knowledge and offered in good faith The statements of this literature do not constitute a warranty express or implied as to the performance of these products As condit2. POSURE Wear a NIOSH approved respirator to control lead exposure Clean up carefully with a HEPA vacuum and a wet mop Before you start find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1 800 424 LEAD or log on to www epa gov lead PRIMING Use of a Rust Oleum primer provides added corrosion protection excellent adhesion and hiding and is especially recommended for bare wood and metal The following primers are recommended 7769 Rusty Metal Primer 7780 Clean Metal Primer 2081 Light Gray Auto Primer 2067 Red Auto Primer 2089 Dark Gray Auto Primer Form GDH 678 Rev 013015 TECHNICAL DATA Te PRODUCT APPLICATION cont APPLICATION Shake can vigorously for one minute after the mixing ball begins to rattle If mixing ball fails to rattle DO NOT STRIKE CAN Contact Rust Oleum Shake often during use Hold can 10 16 from the surface and spray ina steady back and forth motion slightly overlapping each stroke Keep the can the same distance from the surface Keep the can in motion while spraying Apply 2 or more light coats a few minutes apart to avoid runs and sags Metallic Sprays are not recommended for outdoor use Do not use near open flame DRY AND RECOAT Dry and recoat times are based on 70 F and 50 relative humidity Allow more time at cooler temperatures Dries tack free in 2 4 hours to handle in 5 9 hours and is fully dry in 24 hours Apply a second coat
3. ions and use of our materials are beyond our control we can guarantee these products only to conform to our standards of quality and our liability if any will be limited to replacement of defective materials All technical information is subject to change without notice T Rust Oleum Corporation Form GDH 678 T RU ST O L E U M 11 Hawthorn Parkway Phone 877 385 8155 Rev 013015 Vernon Hills Illinois 60061 www rustoleum com BRANDS
4. pd TECHNICAL DATA SRT 01 TRUSTED QUALITY SINCE 1921 RUST OLEUM HGA DESCRIPTION AND USES Rust Oleum Stops Rust Enamel Sprays are designed to provide a durable protective coating with excellent rust prevention and excellent resistance to abrasion fading chipping and dulling These sprays apply easily provide excellent coverage and dry fast to a tough attractive finish Rust Oleum Stops Rust Enamel Sprays are ideal for ferrous non ferrous metal and wood surfaces It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying and an any angle tip which allows you to spray at any angle Not for use on galvanized metal PRODUCTS SKU Aerosol Description 7701830 Crystal Clear 7721830 Fresh Blue 7722830 Harbor Blue 7723830 Navy 7724830 Sail Blue 7727830 Royal Blue 7731830 Grass Green 7733830 Dark Hunter Green 7738830 Hunter Green 7747830 Sunburst Yellow 7754830 Anodized Bronze 7762830 Sunrise Red 7763830 Carnival Red 7758830 Regal Red 7768830 Burgundy 7770830 Almond 7771830 Sand 7775830 Leather Brown 7776830 Flat Black 7779830 Gloss Black 7783830 Pewter Gray 7784830 Charcoal Gray 7786830 Smoke Gray 7789830 Canvas White 7790830 Flat White 7792830 Gloss White 7794830 Antique White 7797830 Semi Gloss White 7798830 Semi Gloss Black 214084 Orange 214085 Flat Brown 214086 Charleston Green 214087 Army Green 241235 Pistachio 241236 Glacier Blue 245897 Burn
5. t Orange 248567 Merlot 248568 Cherry 248569 Emerald 248630 French Roast STOPS RUST ENAMEL SPRAYS PRODUCTS cont SKU Aerosol Description 248631 Night Tide 249032 Khaki 250702 Pure White 250703 Cobblestone 250704 Lobster Red 250705 Fern 262661 Dark Walnut 267112 Kona Brown 269292 Maui Blue 277239 Lagoon 284678 Gloss Light Turquoise PAINTING CONDITIONS Use outdoors or in a well ventilated area such as an open garage Apply when temperature is between 50 90 F 10 32 C and humidity is below 65 to ensure proper drying Do not apply to surfaces when heated exceed 200 F 93 C Do not apply to galvanized steel Avoid spraying in very windy and dusty conditions Cover surrounding area to protect from spray mist PRODUCT APPLICATION SURFACE PREPARATION Remove all dirt grease oil salt and chemical contaminants by washing the surface with a commercial detergent or other suitable cleaning method Rinse with fresh water and allow to thoroughly dry Remove loose paint and rust with a wire brush or sandpaper Previously coated surfaces must be sound and in good condition Smooth hard or glossy finishes should be scarified by sanding to create a surface profile WARNING If you scrape sand or remove old paint from any surface you may release lead paint dust LEAD IS TOXIC EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS BRAIN DAMAGE ESPECIALLY IN CHILDREN PREGNANT WOMEN SHOULD ALSO AVOID EX
Download Pdf Manuals
Related Search