Pegatha P-60224007 Installation Guide
Contents
1. Pegatha Aluminum Baluster asm Installation Instructions 2015 V1 0 www pegatha net Check all local building codes before you begin Step 1 Measure and Cut Railings e Measure the distance between your posts and note the length e Use your measurement and mark your top and bottom rails e Usea miter saw to cut your rails to the deter mined length Step 2 Determine Baluster Locations e Lay your top and bottom rail next to each other and mark the center of your rails e Mark the baluster locations 4 1 2 on center along both railings This will allow for 3 3 4 spac ing between the balusters e Apply stain paint or other finish to the railings and posts Step 3 Install Baluster Connectors e Locate the previously made marks on your rail ings and begin installing the Pegatha baluster con nectors e Besure not to over tighten your baluster con nectors which could cause the screw to become loose over time e Double check that your spacing meets local build Step 3 Install Balusters amp Rails e Install your bottom rail between your posts e Install each baluster by lightly tapping them into place use a block of wood to support the rail while tapping balusters into place e Install your top railing onto the balusters Use pipe clamps if necessary to squeeze the two rails together
Download Pdf Manuals
Related Search