Ideal Pet RWS Instructions / Assembly
Contents
1. All Weather Dog Door Wall Installation Kit The All Weather Door can also be installed in walls 43 4 7 1 4 12 1cm 18 4cm using the optional Wall Installation Kit available from your retailer As with any home improvement project if you do not have the tools or skills to properly install your pet door we suggest using a professional handyman or licensed contractor A Outer Screw Hole Diagram2. All Weather Door INSTALLATION INSTRUCTIONS Tools Required for Installation Hammer and Awl or Nail Drill and 3 8 1cm Drill Bit Sabre Saw Phillips Screwdriver Wear Safety Goggles 1 Determine template placement The die cut template is located in the center of pet door in box Remove screws holding the frame together lift out template Center template width in middle of door tape in place Position the top of the template 2 5 1cm taller than your pet s shoulder Important Under no circumstances should the bottom edge of the rough opening be less than 3 7 6cm from the bottom edge of the wood door 2 Outline pet door opening With template taped in place use a pencil to draw around the inside edge of template onto door Use a nail or awl to mark outer screw holes 3 Drilling holes Next Drill the four 4 3 8 1cm diameter outer screw holes 4 Cutting the opening Mark and drill four 4 3 8 1cm diameter inside saw out starter holes Begin with one of the inside 3 g 1cm corner holes Using a sabre saw cut along inside edge pencil line 5 Assembly and adjustments see diagram Insert outer frame A into opening from exterior side frame must be flush with door surface Place inner frame B into opening from inside door and hold in place Install screws C and tighten until snug Do not over tighten 6 Locking your pet door Slide self locking cover D into guide channel
Download Pdf Manuals
Related Search