Zanussi ZDS 300 User's Manual
Contents
1. 18 Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme see Washing programmes chart Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme see Washing programmes chart Load 9 standard place settings Rinse aid setting position 4 Type Ill Detergent dosage 5 g 20 g Type B Arrangement upper basket Arrangement upper basket without smaller bowl with smaller bowl Arrangement lower basket and salad bowl and salad bowl glass holder in higher position glass holder in higher position Arrangement cutlery basket Cup racks position A A From the Electrolux Group The World s No 1 choice The Electrolux Group is the world s largest producer of powered appliances for kitchen cleaning and outdoor use More than 55 million Electrolux Group products such as refrigerators cookers vacuum cleaners chain saws and lawn mowers are sold each year to a value of approx 14 billion USD in more than 150 countries around the world 152957 01 0 Subject to change without notice 01 052. 5 To memorise the operation switch off the dishwasher by pressing the On Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode To deactivate the rinse aid dispenser follow the above instructions until the indicator light end of programme turns off Prior to using for the first time Before using your dishwasher for the first time 1 Ensure that the electrical and water connections comply with the installation instructions 2 Remove all packaging from inside the appliance Set the water softener 4 Pour 1 litre of water inside the salt container and then fill with dishwasher salt 5 Fill the rinse aid dispenser o The water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a detrimental or adverse effect on the operation of the appliance The higher the content of these minerals and salts the harder your water is Water hardness is measured in equivalent scales German degrees dH French degrees TH and mmol l millimol per litre international unit for the hardness of water The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area The water softener must be set in both ways manually using the water hardness dial and electronically using the function push bu
3. Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or solvent acetone trichloroethylene etc Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run a 65 C wash programme without dishes using detergent Cleaning the filters The filters must be checked and cleaned from time to time Dirty filters will degrade the washing result 1 Open the door remove the lower basket 2 The dishwasher filter system comprises a coarse filter A a microfilter B and a flat filter C Unlock the filter system using the handle on the microfilter and remove MA39 4 Take hold of the coarse filter A by the handle with the hole and remove from the microfilter B 5 Clean all filters thoroughly under running water 6 Remove the flat filter C from the base of the washing compartment and clean both faces thoroughly Ci MA47 7 Put the flat filter C back in the base of the washing compartment 8 Place the coarse filter A in the microfilter B and press together 9 Put the filter combination in place and lock by turning the handle clockwise to the stop During this process ensure that the flat filter does no
4. e Switch the water hardness setting to the highest possible position and run from 1 to 3 normal washing programmes without a load e Readjust the water hardness setting again according to the hardness of the water in your area Washing programmes Programme Degree of soil Press the Cycle description 3 Consumption values and programme Programme Energy Water type of load button duration consumption consumption in minutes in kWh in litres Hot prewash Heavy soil tt Main wash up to 70 C Intensive 70 C Crockery cutlery pots 2 warm rinses 70 80 1 5 1 7 18 20 and pans 70 1 hot rinse Drying Cold prewash Main wash up to 65 C Normal soil O Normal 65 C o3 1 cold rinse 7 z Crockery and cutlery 65 hotrinse 85 95 1 1 1 3 15 17 Drying Fresh soil Py i 1 Quick 60 C oak SoL dsw im Main wash up to 60 C 25 30 0 7 0 8 7 8 r ry an r i ockery ana cutlery 60 A 30 1 hot rinse Cold prewash Normal soil ECO Main wash up to 50 C 2 Eco 50 C 3 1 cold rinse 160 170 0 75 0 8 12 13 Crockery and cutlery 50 1 hot rihse Drying Ideal for washing crockery and cutlery of breakfast and dinner fresh soil This is the perfect daily programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery Testing programme for EN 50242 see Hints for Test Centres This programme developed for the use of detergents with enzymes allows you
5. after use This product should be serviced by an authorised service engineer and only genuine spare parts should be used e Under no circumstances should you attempt to repair the machine yourself Repairs carried out by inexperienced persons may cause injury or serious malfunctioning Contact your local Service Force Centre Always insist on genuine spare parts Disposal Dispose of the dishwasher packaging material correctly All packaging materials can be recycled Plastic parts are marked with standard international abbreviations gt PE lt for polyethylene e g sheet wrapping material gt PS lt for polystyrene e g padding material always CFC free gt POM lt for polyoxymethylene e g plastic clips Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling As and when you cease to use your dishwasher and withdraw it from service your should render it unserviceable before having it disposed of Warning Children at play could lock themselves in your dishwasher or otherwise endanger their lives Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside For the disposing of the appliance please take it to a recycling centre or to your dealer who may for a small contribution to the costs dispose it for you Economical and ecological dishwashing e Ensure that the
6. in addition to the dishwashing programme selected the following functions can also be set with the help of these buttons the setting of the water softener activation deactivation of the rinse aid dispenser the cancelling of a programme in progress Door handle Programme selection Delay start button buttons 3 in 1 button Programme selection buttons the selection of a washing programme occurs by pressing one of these buttons see Washing programmes chart Delay start button this option allows the start of the programme to be delayed by 3 6 or 9 hours Indicator lights Phase indicator lights have the following meanings Wash illuminates when the washing and rinsing IN phases are running W Drying illuminates when the drying phase is running End of programme illuminates when the washing programme has ended It also has added functions of visual signalling as the setting of the water softener activation deactivation of the rinse aid dispenser intervention of an alarm due to the malfunction of the machine As soon as you select a washing programme the phase indicator lights for that programme will start flashing As the programme starts the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light Control indicator lights have the following meanings S Salt refill
7. product Packaging parts may be dangerous for children who could even be suffocated You should therefore keep all packaging well away from children The water in your dishwasher is not for drinking Detergent residues may still be present in your machine Keep children well away from your dishwasher when the door is open Keep all detergents in a safe place out of children s reach Your dishwasher in day to day use Items that are contaminated by petrol paint steel or iron debris corrosive acidic or alkaline chemicals must not be washed in this dishwasher Under no circumstances should you open the door whilst the appliance is in operation especially during the washing phase hot water may escape However if the door is opened a safety device ensures that the machine stops Only use products detergent salt and rinse aid specifically designed for use in dishwashers Long bladed knives stored in an upright position are a potential hazard Long and or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid anybody tripping over the open door and hurting themselves When finishing loading or unloading close the door as an open door can be a hazard Do not sit or stand on the open door Isolate the appliance from the power supply and turn off the water supply
8. to achieve with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65 C programmes and conventional detergents To compensate the lower temperature the duration of washing and drying have been extended The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply 14 Starting a washing programme 1 N 9 A o D Check that the baskets have been loaded correctly and that the spray arms can rotate freely Turn on the water tap Close the dishwasher door Press the On Off button The On Off indicator light will come on Setting and starting the programme Press the button corresponding to the required programme see Washing programmes chart The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking After about 3 seconds from the last pressure of a button the programme starts automatically Once the programme has started the phase indicator lights will turn off except for the phase under way If you want to set the delay start of a washing programme Set the delay start before selecting a washing programme Press the delay start button until the indicator light corresponding to the chosen hours flashes 3h 6h or 9h Press the button corresponding to the required programme see Washing programm
9. Before plugging the appliance into the wall socket make sure that 1 The mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate 2 The meter fuses mains power supply and wall socket can all take the maximum load required Make sure that the socket and plug are compatible without having to use any type of adaptor If necessary have the domestic wiring system socket replaced To isolate the dishwasher from mains remove the mains plug Important The plug must still be accessible after the appliance has been installed In case that the electrical cable has to be replaced please contact your local Service Force Centre The appliance should not be connected to the electrical supply by means of an extension cable Safety standards require the appliance to be earthed The manufacture accepts no liability for failure to observe the above safety precautions Description of the appliance Upper basket stop Water hardness dial Salt container Detergent dispenser Control panel Rating plate Rinse aid dispenser 902 Ss SOU ay ON E Filters o Lower spray arm 10 Upper spray arm 11 Upper basket 12 Worktop The control panel On Off indicator light Function buttons Indicator lights 2 E A Eco m 3h On e sh ew e 5 60 A30 50 oh eR 0 x ET CANCEL On Off button Function buttons
10. Lead crystal glass Steel items subject to rusting Wooden platters Items made from synthetic fibres Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher safe by the manufacturer Glazed patterns may fade if machine washed frequently Silver and aluminium parts have a tendency to discolour during washing Residues e g egg white egg yolk and mustard often cause discolouring and staining on silver Therefore always clean left overs from silver immediately if it is not to be washed straight after use Some types of glass can become dull after a large number of washes Open the door and slide out the baskets to load the dishes The lower basket The lower basket is designed to take saucepans lids plates salad bowls cutlery etc Serving dishes and large lids should be arranged around the edge of the basket ensuring that the spray arms can turn freely uiet 10 The two rows of prongs on the lower basket can be easily lowered to allow you to load pots pans and bowls The cutlery basket Long bladed knives stored in an upright position are a potential hazard Long and or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket Take care when loading or unloading sharp items such as knives Forks and spoon
11. ZANUSSI DISHWASHER ZDS 300 Instruction book Contents Safety instructions 3 Maintenance and cleaning 16 Di l 3 Cleaning the filters 16 Sposa Prolonged periods of non operation 16 Economical and ecological dishwashing 3 Frost precautions 16 Spia Moving the machine 16 Installation instructions 4 Fitting under a counter 4 What to do when 17 Levelling 4 Service and spare parts 18 Water supply connections 4 Hints for test centres 19 Security system Aqualock 4 Water outlet hose connection 5 Electrical connection 5 Description of the appliance 6 The control panel 6 Prior to using for the first time 8 The water softener 8 Filling with dishwasher salt 9 Rinse aid 9 In daily use 10 Loading cutlery and dishes 10 The lower basket 10 The cutlery basket 11 The upper basket 11 Adjusting the height of the upper basket 11 Use of detergent 12 Different kinds of detergent 13 Washing programmes 14 Starting a washing programme 15 Technical specifications Dimensions Width 45 cm Height with worktop 85 cm Height without worktop 82 cm Max depth 63 cm Max depth with open door 118 5 cm Electrical connection Voltage Overall power Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher s door Water supply pressure Minimum 50 kPa 0 5 bar Maximum 800 kPa 8 bar Capacity 9 place settings 73 23 or 19 2 73 Low Voltage Directive and subsequ
12. aily use Check if it s necessary to refill with dishwasher salt or rinse aid e Load cutlery and dishes into the dishwasher e Fill with dishwasher detergent e Select a wash programme suitable for the cutlery and dishes e Start the wash programme Loading cutlery and dishes Sponges household cloths and any object that can absorb water may not be washed in the dishwasher e Before loading the dishes you should Remove large left overs Soften remnants of burnt food in pans e When loading the dishes and cutlery please note Dishes and cutlery must not impede the rotation of the spray arms Load hollow items such as cups glasses pans etc with the opening downwards so that water cannot collect in the container or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must not touch Lay small objects in the cutlery basket e Plastic items and pans with teflon have a tendency to retain water drops these items will not dry as well as porcelain and steel items For washing in the dishwasher the following cutlery dishes are not suitable are of limited suitability Cutlery with wooden horn china or mother of pearl handles Plastic items that are not heat resistant Older cutlery with glued parts that is not temperature resistant Bonded cutlery items or dishes Pewter or copper items
13. amme see Starting a washing programme To cancel a washing programme in progress NOTE in case that drying results are not satisfactory it is possible to activate only the rinse aid dispenser The activation deactivation of the rinse aid dispenser can be carried out only with the 3 in 1 function active Activation deactivation of the rinse aid dispenser The dishwasher must be switched off With the activation of the rinse aid dispenser also the rinse aid indicator light on the control panel is automatically activated 1 Press the On Off button The On Off indicator light illuminates setting mode If a programme button indicator light is on this means that a washing programme has been set The programme must be cancelled press simultaneously the function buttons 2 and 3 for about 2 seconds All the indicator lights will turn off except for the On Off indicator light indicating that the set programme has been cancelled and the machine is now in setting mode 2 Press simultaneously function buttons 2 and 3 until the indicator lights of the function buttons 1 2 and 3 start flashing 3 Press the function button 2 the indicator lights of function buttons 1 and 3 turn off while the indicator light of the function button 2 goes on flashing 4 To activate the rinse aid dispenser press the function button 2 again the indicator light end of programme illuminates indicating that the rinse aid dispenser has been activated
14. ap and contact the Service Force Centre Once the checks have been carried out close the door and press the button of the programme that was running before the intervention of the alarm the programme will continue from the point at which it was interrupted If the fault code reappears contact the Service Force Centre For other combinations of fault codes not described in the above chart will appear please contact your Service Force Centre there are problems when operating the dishwasher Malfunction Possible cause Solutions The programme does not start The dishwasher door has not been properly closed Close the door The main plug is not plugged in Insert the mains plug The fuse has blown in the household fuse box Replace the fuse For dishwasher models with delay start option Delay start has been selected If dishes are to be washed immediately cancel the delay start There is a whistling noise during washing The whistling is not a cause for concern Use a different brand of detergent 17 the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected e The dishes were arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded The spray arms do not rotate freely due to wrong arrangement of the load e The filters in the base of the washing c
15. ent modifications C This appliance complies with the following E E C Directives 89 336 or 3 5 89 Electromagnetic Compatibility Directive and subsequent modifications Safety instructions It is most important that this instruction book should be retained with the appliance for future reference Should the appliance be sold or transferred to another owner or should you move house and leave the appliance always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information This information has been provided in the interest of your safety You MUST read it carefully before installing or using the appliance Installation Check your dishwasher for any transport damage Never connect a damaged machine If your dishwasher is damaged you should contact your supplier For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way Any electrical and plumbing work required to install this appliance should be carried out by a qualified and competent person Care must be taken to ensure that the appliance does not stand on the electrical supply cable The sides of the dishwasher must never be drilled to prevent damage to hydraulic components Child safety This appliance is designed to be operated by adults Children should not be allowed to tamper with the controls or play with the
16. es chart After about 3 seconds from the last pressure of a button the countdown starts automatically The countdown will decrease with steps of 3 hours The opening of the door will not modify or interrupt the countdown Once the delay start has elapsed the programme will start automatically Note it is possible to select a washing programme and the delay start also with the door slightly opened In this case the start of the programme or of the countdown will occur after about 3 seconds from the closure of the door To interrupt or cancel a washing programme in progress Interrupt or cancel a washing programme in progress ONLY if its absolutely necessary Attention Hot steam may escape when the door is opened Open the door carefully To interrupt a washing programme in progress a Open the dishwasher door the programme will stop Close the door the programme will start from the point at which it was interrupted b Press the On Off button in this case all the indicator lights turn off Press the On Off push button again the programme will start from the point at which it was interrupted N 8 o To cancel a washing programme in progress To cancel a washing programme in progress press simultaneously the function buttons 2 and 3 until all the indicator lights will turn off except for the On Off indicator light and eventually the rinse aid and salt indicator lights indicating that the running programme
17. has been cancelled If a new washing programme will be selected check that there is detergent in the detergent dispenser Cancelling the delay start in progress It is possible to cancel a countdown in progress or before it starts simply pressing the delay start button until the indicator lights corresponding to the delay start hours 3h 6h or 9h turn off In this case the selected washing programme will start automatically after a 3 seconds End of the washing programme The dishwasher will automatically stop and the end of programme phase indicator light will illuminate The indicator light of the programme just ended will remain on Switch off the dishwasher by pressing the On Off button the On Off indicator light turns off Open the dishwasher door leave it ajar and wait a few minutes before removing the dishes in this way they will be cooler and the drying will be improved Unloading the dishwasher Hot dishes are sensitive to knocks The dishes should therefore be allowed to cool down before removing from the appliance Empty the lower basket first and then the upper one this will avoid water dripping from the upper basket onto the dishes in the lower one Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off
18. i detergents If you are using dishwasher detergent that includes the rinse aid function this must be placed in the detergent compartment In this case the rinse aid dispenser must be empty in order to avoid a double dosage If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using these kind of detergents The rinse aid indicator light will always remain illuminated when the machine is switched on not all dishwasher models are foreseen with rinse aid indicator light Special salt for dishwasher must still be used 13 Use of 3 in 1 combi detergents General advice These products are detergents with integrated and combined detergent rinse aid and salt functions 1 Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers on the product packaging These products should be strictly used according to the detergent manufacturers instructions If you encounter problems when using 3 in 1 products for the first time then please contact the detergent manufacturers care line the telephone number is given on the product packaging Special advice When using combination 3 in 1 products select the 3 in 1 function If you decide to turn back to the use of the standard detergent system we advise that you e Refill both the salt container and rinse aid dispenser
19. ing indicator light illuminates when the salt has run out ope Rinse aid refilling indicator light illuminates when the rinse aid has run out The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary 3 in 1 button this appliance is equipped with the 3 in 1 function that allows the use of the 3 in 1 combi detergent tablets This function can be selected with all washing programmes With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated Select the 3 in 1 function before the setting of a washing programme Once selected this option button indicator light illuminated it will remain active also for the following washing programmes to deactivate the function press the button button indicator light off With the use of 3 in 1 combi detergent tablets the cycle durations given in the Washing programmes chart may change NOTE Once the programme is running the 3 in 1 function can NO longer be changed If you want to exclude the 3 in 1 function you have to cancel the programme setting and then deactivate the 3 in 1 function by pressing the 3 in 1 button In this case you have to set a washing programme again and eventual options To cancel the running progr
20. into the machine 2 Hooked over the edge of the sink using the special curved plastic guide if provided with the machine 3 To a stand pipe provided with vent hole minimum internal diameter 4 cm The waste connection must be at a height of between 30 cm minimum and 100 cm maximum from the bottom of the dishwasher The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided max 100 cm 2m max 4 Meal SS a CS18 Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided Attention Our appliances are supplied with a security device to protect against the return of dirty water back into the machine If the spigot of your sink has a no return valve incorporated this can prevent the correct draining of your dishwasher We advise you therefore to remove it Electrical connection Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher s door
21. le for the consumer service department If the dishwasher is later used as a free standing appliance the original worktop must be re mounted The plinth on free standing appliances is not adjustable Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the machine is perfectly level Water supply connections This dishwasher may be fed with either hot max 60 or cold water Nevertheless we advise you a cold water supply A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot For making the connection itself the coupling nut fitted to the machine s supply hose is designed to screw onto a 3 4 inch gas thread spout or to a purpose made quick coupling tap such as the Press block The water pressure must be within the limits given in the Technical specifications Your local Water Authority will advise you on the average mains pressure in your area The water inlet hose must not be kinked crushed or entangled when it is being connected up The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks Attention NOT all m
22. m a unique and complete product tested by millions of householders Calgonit System includes Calgonit detergent rinse aid salt machine detergent and Citro Fresh It is able to fulfil the main requirements for clearing both the crockery and the machine itself 12 Different kinds of detergent Detergent tablets Detergent tablets of different brands dissolve at different speeds For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programmes Therefore please use long programmes when using detergent tablets to ensure the complete removal of detergent residuals Do not place the tablets in the tub or in the cutlery basket as this will result in poorer wash results The tablets should be placed in the detergent dispenser Concentrated detergent Based on their chemical composition dishwasher detergents can be split into two basic types conventional alkaline detergents with caustic components low alkaline concentrated detergents with natural enzymes The use of 50 C washing programmes in conjunction with concentrated detergents reduces pollution and is good for your dishes these wash programmes are specially matched to the dirt dissolving properties of the enzymes in the concentrated detergent For this reason 50 C wash programmes in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using 65 C programmes Comb
23. ng up periodically You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished The salt indicator light on the control panel can remain illuminated for 2 6 hours after the salt has been replenished assuming the dishwasher remains switched on If you are using salts that take longer to dissolve then this can take longer The function of the machine is not affected Do not worry if water over flows from the unit when filling with salt this is quite normal NN Ensure that the lid is closed after every refill BRO BR14 Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash Only use branded rinse aid for dishwashers Never fill the rinse aid dispenser with any other substances e g dishwasher cleaning agent liquid detergent This would damage the appliance Adjusting the dose According to the finish and drying results obtained adjust the dose of rinse aid by means of the 6 position selector position 1 minimum dosage position 6 maximum dosage The dose is factory set in position 4 Increase the dose if there are drops of water or lime spots on the dishes after washing Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades Top up the rinse aid when the indicator light on the control panel illuminates In d
24. ntion of an alarm is indicated by continuous flashing of the indicator light of the running programme a combination of flashing and pauses of the end of programme indicator light as described in the chart Open the door and carry out the following suggested corrective actions Fault code malfunction Possible cause Solutions continuous flashing of the indicator light of the running programme 1 flash of the end of programme indicator light The machine does not fill with water The water tap is blocked or furred with limescale Clean the water tap The water tap is turned off Turn the water tap on The filter where present in the threaded hose fitting at the water inlet valve is blocked The water inlet hose has not been correctly laid or it is bent or squashed Clean the filter in the threaded hose fitting Check the water inlet hose connection continuous flashing of the indicator light of the running programme 2 flashes of the end of programme indicator light The dishwasher will not drain The sink spigot is blocked Clean out the sink spigot The water drain hose has not been correctly laid or it is bent or squashed Check the water drain hose connection continuous flashing of the indicator light of the running programme 3 flashes of the end of programme indicator light Anti flood device has activated Close the water t
25. odels of dishwashers have fill and drain hoses provided with locknut In this case this kind of facility is not possible If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose Do not use for connection old hoses which have been used in another appliance The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations Security system AQUALQCK Inlet hose AQUAL cK The AQUAL CK inlet hose has a high pressure resistance It can sustain pressures up to 6000 kPa 60 bar 6 times a normal hose As a further safeness the inlet hose is protected with a sheathing against eventual damages In case of breakage of the inner hose the water that is in the hose will become dark this is visible across the special transparent sheathing In this case turn off the water tap and call the Service Force Centre The AQUALO CK inlet hose is fitted with a safety device to prevent inadvertent loosening To detach the hose press the lever B and turn the retaining ring A anticlockwise Water outlet hose connection The end of the drain hose can be connected in the following ways 1 To the sink outlet spigot securing it to the underside of the work surface This will prevent waste water from the sink running
26. ompartment are dirty or incorrectly positioned Too little or no detergent has been used e Where there are limescale deposits on the dishes the salt container is empty or the wrong level of the water softener has been selected e The drain hose connection is not correct The salt container cap is not properly closed The dishes are wet and dull e Rinse aid was not used The rinse aid dispenser is empty There are streaks milky spots or a bluish coating on glasses and dishes e Decrease rinse aid dosing Water drops have dried onto glasses and dishes Increase rinse aid dosing The detergent may be the cause Contact the detergent manufacturer s consumer care line If after all these checks the problem persists contact your local Service Force Centre quoting the model Mod product number PNC and serial number S N This information can be found on the rating plate located on the side of the dishwasher door see picture So that you always have these numbers at hand we recommend you to make a note of them here Service and spare parts This product should be serviced by an authorised service engineer and only genuine spare parts should be used Under no circumstances should you attempt to repair the machine yourself Repairs carried out by inexperienced persons may cause injury or serious malfunctioning Contact your local Service Force Centre Always insist on genuine spare parts
27. rogramme see chart Example 5 flashes level 5 To change the level press button 1 Each time the button is pressed the level changes For the selection of the new level see the chart Examples if the current level is 5 by pressing button 1 once level 6 is selected if the current level is 10 by pressing button 1 once level 1 is selected After about 5 seconds the indicator light of the function button1 starts flashing indcating the new selected level To memorise the operation switch off the dishwasher by pressing the On Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode Water hardness Adjusting the water hardness Number of flashes of the Use setting end of programme of salt dH TH mmol l Range manually electronically indicator light 51 70 91 125 9 0 12 5 Vi 2 level 10 10 yes 43 50 76 90 7 6 8 9 Vi 2 level 9 9 yes 37 42 65 75 6 5 7 5 Vi 2 level 8 8 yes 29 36 51 64 5 1 6 4 Vi 2 level 7 7 yes 23 28 40 50 4 0 5 0 Vi 2 level 6 6 yes 19 22 33 39 3 3 3 9 Ul 2 level 5 5 yes 15 18 26 32 2 6 3 2 Ill 1 level 4 4 yes 11 14 19 25 1 9 2 5 Il 1 level 3 3 yes 4 10 7 18 0 7 1 8 Wl 1 level 2 2 yes lt 4 lt 7 lt 0 7 1 level 1 1 no Filling with dishwasher salt Only use salt specifically designed for use in dishwashers All other types of salt not specificall
28. s should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards If the handles protrude from the bottom of the basket obstructing the lower spray arm load the cutlery with the handles facing upwards Mix spoons with other cutlery to prevent them from sticking together For best results we recommend you to use the cutlery grid provided if the size and dimensions of the cutlery allow it ul76 The upper basket The upper basket is designed for plates dessert plates saucers dinner plates of up to 24 cm in diameter salad bowls cups and glasses Arrange items on and underneath the cup racks so that water can reach all surfaces Glasses with long stems can be placed upside down in the cup racks For taller items the cup racks can be folded upwards Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move Before closing the door ensure that the spray arms can rotate freely 11 Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position Maximum height of the dishes in upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm To move to
29. t protrude above the base of the washing compartment 16 Attention Under no circumstances may the dishwasher be used without filters Incorrect repositioning and fitting of the filters will produce poor washing results NEVER try to remove the upper spray arm If residues of soil have clogged the holes in the upper spray arm remove them with a toothpick Prolonged periods of non operation If you are not using the machine for any period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the formation of any unpleasant smells 3 Leave the inside of the machine clean Frost precautions Avoid placing the machine in a location where the temperature is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses Avoid over tilting the machine during transportation What to do when Certain problems are due to the lack of simple maintenance or oversights which can be solved with the help of the instructions given here without calling out an engineer a flashing fault code appears The dishwasher will not start or stops during operation The interve
30. the higher position proceed as follows 1 Move the front runner stops A of the upper basket outwards and slide the basket out 2 Refit the basket in the higher position and replace the stops A in their original position When the basket is in the higher position you will not be able to use the cup rack s After loading your machine always close the door as an open door can be a hazard Use of detergent Only use detergents specifically designed for use in dishwashers Using no more then the correct amount of detergent contributes to reducing pollution Please observe the manufacturer s dosing and storage recommendations as stated on the detergent packaging Fill with detergent 1 If the lid is closed press release button 1 The lid springs open 2 Fill the detergent dispenser 2 with detergent The marking indicates the dosing levels 20 approximately 20 g of detergent 30 approximately 30 g of detergent DE19 3 All programmes with prewash need an additional detergent dose 5 10 g that must be placed in the prewash detergent chamber 3 This detergent will take effect during the prewash phase 4 Close the lid and press until it locks in place The products In order to obtain a good wash it is necessary to use detergents specially designed for dishwashers To ensure that your dishwasher functions perfectly Zanussi recommends using Calgonit Syste
31. ttons on the control panel a Setting manually 1 Open the dishwasher door 2 Remove the lower basket from the dishwasher 3 Turn the water hardness dial to position 1 or 2 see table 4 Replace the lower basket The dishwasher is factory set at position 2 AA07 b Setting electronically The dishwasher must be switched off NOTE the electronic setting of the water softener is possible ONLY with the 3 in 1 function deactivated The dishwasher is factory set at level 5 Press the On Off button The On Off indicator light illuminates setting mode If a programme button indicator light is on this means that a washing programme has been set The programme must be cancelled press simultaneously the function buttons 2 and 3 for about 2 seconds All the indicator lights will turn off except for the On Off indicator light and eventually salt and rinse aid indicator lights indicating that the set programme has been cancelled and the machine is now in setting mode Press simultaneously function buttons 2 and 3 until the indicator lights of the function buttons 1 2 and 3 start flashing Press the function button 1 the indicator lights of function buttons 2 and 3 turn off while the indicator light of the button 1 goes on flashing at the same time the indicator light end of programme starts to flash The current level is indicated by the number of flashes of the indicator light end of p
32. water softener is correctly adjusted e Do not pre wash under running water e Select the wash programme to suit the nature and degree of the soiling on the dishes Do not use more detergent dishwasher salt and rinse aid than is recommended in these operating instructions and by the manufacturer of the respective product Installation instructions Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Remove all packaging before positioning the machine If possible position the machine next to a water tap anda drain Fitting under a counter kitchen worktop or sink By removing the machine s worktop you can install it under a close fitting sink unit or a pre existing top providing the dimensions of the recess correspond to those shown in the picture INO4 Proceed as follows Remove the machine s worktop by unscrewing the two rear retaining screws pull the worktop from the back of the machine and slide out the front slots lifting the worktop Insert the machine after adjusting height and levelling with the adjustable feet When inserting the machine ensure that the water inlet and drain hoses are not kinked or squashed During all operations that involve accessibility to internal components the dishwasher has to be unplugged Be sure that once the appliance has been installed it is easily accessib
33. y designed for use in a dishwasher especially table salt will damage the water softener Only fill with salt just before starting one of the complete washing programmes This will prevent any grains of salt or salty water which may have been spilt remaining on the bottom of the machine for any period of time which may cause corrosion To fill 1 Open the door remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise 2 Pour 1 litre of water inside the container this is necessary only before filling with salt for the first time Rinse aid Rinse aid is automatically added during the last rinse ensuring thorough rinsing and spot and streak free drying The dispenser which is positioned inside the door holds about 110 ml of rinse aid which is sufficient for 16 40 dishwashing programmes depending upon the dosage setting Filling with rinse aid 1 Open the container by pressing the release button A 2 Add the rinse aid until the container is completely full The maximum level for filling is indicated by max max 3 Using the funnel provided pour in the salt until the container is full 4 Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket 5 Replace on the cap tightly turning it clockwise until it ya N NI 2S Ta stops with a click shi The salt container will require toppi
Download Pdf Manuals
Related Search