Weider 15CT User's Manual
Contents
1. Leg Lever Low Pulley Station Foot Plate ASSEMBLY Make Assembly Easier for Yourself Everything in this manual is designed to ensure that the weight system can be assem bled successfully by anyone Before begin ning assembly make sure to read the information on this page This brief intro duction will save you much more time than it takes to read it Assembly Requires Two Persons For your convenience and safety assemble the weight system with the help of another person Set Aside Enough Time Due to the many features of the weight system the assembly process will take time By setting aside plenty of time and by deciding to make the task enjoyable assembly will go smoothly You may want to assemble the weight system over a couple of evenings Select a Location for the Weight System Because of its weight and size the weight system should be assembled in the location where it will be used Make sure that there is enough room to walk around the weight system as you assemble it How to Unpack the Box To make assembly as easy as possible we have divided the assembly process into four stages The parts needed for each stage are found in individual bags Important Wait until you begin each stage to open the parts bag for that stage Place all parts of the weight system in a cleared area and remove the packing materials Do not dispose of the packing materials until assembly is comp2. Model No WESY17010 Serial No Write the serial number in the space above for reference Serial Number Decal under seat QUESTIONS As a manufacturer we are com mitted to providing complete customer satisfaction If you have questions or if there are missing or damaged parts we will guarantee complete satis faction through direct assis tance from our factory TO AVOID DELAYS PLEASE CALL DIRECT TO OUR TOLL FREE CUSTOMER HOT LINE The trained technicians on our customer hot line will provide immediate assistance free of charge CUSTOMER HOT LINE 1 800 999 3756 Mon Fri 6 a m 6 p m MST A CAUTION Read all precautions and instruc tions in this manual before using this equipment Save this manual for future reference USER S MANUAL O www weiderfitness com new products prizes fitness tips and much more TABLE OF CONTENTS IMPORTANT PRECAUTIONS E bee Pee RE a a ee Be a eo 3 BEFORE YOU BEGIN lt da a ale a a 4 ASSEMBLY Gli a CAA ee a 5 ADJUSTMENT E E et a A 16 WEIGHT RESISTANCE CHART 18 TROUBLE SHOOTING AND MAINTENANCE 19 CABLE DIAGRAM incalliti ig OPES Page hie ed ra a a e Se ara 20 PARI LIST a ga Sas a Mae A
3. the Press Frame 17 Be sure that the Cable is routed around the Pulley as shown and that the Cable Trap 66 is turned to hold the Cable in place Route the Short Cable 23 around the 3 1 2 Pulley 15 attached to the upper hole in the Front Upright 42 Refer to the inset draw Inset shows view ing Be sure that the Cable is routed around from other side the Pulley as shown and that the Cable Trap 66 is turned to hold the Cable in place 22 Attach the end of the Short Cable 23 to the Long U Bracket 57 with a 1 4 Nylon Locknut 2 and a 1 4 Washer 10 Do not completely tighten the Nylon Locknut it should be threaded onto the end of the Cable until two threads are showing above the Nylon Locknut as shown in the inset drawing 12 23 24 25 SEAT ASSEMBLY Attach the Backrest 41 to the Front Upright 42 with two 1 4 x 2 1 2 Screws 43 and two 1 4 Washers 10 Press a 1 1 2 Square Inner Cap 32 into the Seat Frame 36 Insert a 1 4 x 2 Carriage Bolt 38 into the center hole in the Seat Plate 37 Attach the Seat Plate to the Seat 13 with two 1 4 x 3 4 Screws 18 Insert the 1 4 x 2 Carriage Bolt 38 into the indi cated hole in the Seat Frame 36 Tighten a 1 4 Nylon Locknut 2 with a 1 4 Washer 10 onto the Carriage Bolt Attach the other end of the Seat 13 to the Seat Fr
4. Bolt 69 anda 3 8 Nylon Locknut 21 Make sure that the Bolt and the Nylon Locknut are tight 10 17 18 19 20 Using a 3 8 x 3 1 2 Bolt 16 a 3 8 Washer 9 and a 3 8 Nylon Locknut 21 secure a 3 1 2 Pulley 15 and a Cable Trap 66 to the upper hole in the Press Frame 17 Make sure that the Cable Trap and the Pulley are oriented as shown Locate the Short Cable 23 Lay the Short Cable inside the bracket on the Base 4 Attach a 3 1 2 Pulley 15 inside the bracket with a 3 8 x 2 Bolt 12 and a 3 8 Nylon Locknut 21 Be sure that the ball on the Cable is on the indi cated side of the bracket Attach two 3 1 2 Pulleys 15 and two Cable Traps 66 to the Front Upright 42 with two 3 8 x 3 3 4 Bolts 68 two 3 8 Washers 9 and two 3 8 Nylon Locknuts 21 Be sure that all parts are oriented as shown Do not tighten the Nylon Locknuts yet Route the Short Cable 23 around the 3 1 2 Pulley 15 attached to the lower hole in the Front Upright 42 See the inset drawing Be sure that the Cable Trap 66 is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown Tighten the 3 8 Nylon Locknut 21 and the 3 8 x 3 3 4 Bolt 68 11 Inset shows view from other side 21 Route the Short Cable 23 up around the 3 1 2 Pulley 15 attached to the upper hole in
5. CMY 1 4 x 3 4 Screw 18 ay 3 8 x 2 1 2 Bolt 7 CUM 5 16 x 2 1 2 Carriage Bolt 1 5 16 x 2 3 4 Bolt 11 NA 5 16 x 2 3 4 Carriage Bolt 14 LI AAA A 3 8 x 3 1 2 Bolt 16 AN 3 8 x 3 3 4 Bolt 68 AM 5 16 x 4 3 4 Bolt 64 3 8 x 8 Bolt 59 N y 1 3 4 Square Inner Cap 44 A Ss Ne LJ 1 1 2 Square Inner Cap 32 1 Square Inner Cap 65 2 Square Outer Cap 51 fH Nn 2 Square Inner Cap 27 NINA PART LIST Model No WESY17010 Key No Qty 0 3 gt 4 5 2 3 IN AUD gt NON Description 5 16 x 2 1 2 Carriage Bolt 1 4 Nylon Locknut 5 16 Nylon Locknut Base Stabilizer V Pulley 3 8 x 2 1 2 Bolt 5 16 Washer 3 8 Washer 1 4 Washer 5 16 x 2 3 4 Bolt 3 8 x 2 Bolt Seat 5 16 x 2 3 4 Carriage Bolt 3 1 2 Pulley 3 8 x 3 1 2 Bolt Press Frame 1 4 x 3 4 Screw Weight Carriage Pulley Bracket 3 8 Nylon Locknut 5 16 x 2 1 2 Bolt Short Cable 1 4 x 2 Screw 3 8 Nylo
6. a 1 Round Inner Cap 49 into each end of the handle on the Press Arm Attach the Press Arm to one side of the Press Frame 17 with two 5 16 x 2 1 2 Bolts 22 and two 5 16 Nylon Locknuts 3 Assemble the other Press Arm 46 in the same manner 6 Identify the Right Arm 48 and the Left Arm 47 Note the position of the welded bracket on each Arm Arm identification is very important for step 7 Brackets 7 Lubricate both axles on the Top Frame 55 Slide the Right Arm 48 onto the right axle Note Be careful not to confuse the Right Arm with the Left Arm 47 refer to step 6 to identify the Right Arm Be sure that the upper end of the Right Arm is behind the indicated bracket on the Top Frame Tap two 1 Retainers 63 and a 1 Round Cover Cap 62 onto the right axle Be sure that the teeth on the Retainers bend toward the Cover Cap as shown in the inset drawing Attach the Left Arm 47 in the same manner Press 1 3 4 Square Inner Caps 44 into the lower ends of the Right and Left Arms 47 48 Wet the lower end of each Arm with soapy water Slide a Foam Pad 45 onto the lower end of each Arm CABLE ASSEMBLY 8 During steps 9 through 22 refer to the CABLE DIAGRAM on page 20 of this manual to verify proper cable routing Before beginning this sec tion identify the Short Cable 23 and the Long Cable 58 by comparing the lengths and the ends of the cab
7. don a A i bea ea a a ae 22 EXPLODED DRAWING ee e te n 23 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY e etate a ar aa a dae aa Back Cover Note A PART IDENTIFICATION CHART is attached in the center of this manual WEIDER is a registered trademark of ICON Health amp Fitness Inc 2 IMPORTANT PRECAUTIONS AWARNING To reduce the risk of serious injury read the following important precautions before using the weight system 1 10 11 Read all instructions in this manual and in the accompanying literature before using the weight system It is the responsibility of the owner to ensure that all users of the weight system are ade quately informed of all precautions The weight system is intended for home use only Do not use the weight system in a com mercial rental or institutional setting Use the weight system only on a level sur face Cover the floor or carpet beneath the weight system to protect the floor Make sure all parts are properly tightened each time you use the weight system Replace any worn parts immediately Keep children under the age of 12 and pets away from the weight system at all times Keep hands and feet away from moving parts Always wear athletic shoes for foot protec tion when using the weight system Always stand on the foot plate when per forming an exercise that could cause the weight system to tip Never release the press ar
8. to make sure that the cables move smoothly over the pulleys If one of the cables does not move smoothly find and correct the problem IMPORTANT If the cables are not properly routed they may be damaged when heavy weight is used See the CABLE DIAGRAM on page 20 of this manual for proper cable routing If there is any slack in the cables you will need to remove it by tightening the cables See TROUBLE SHOOTING AND MAINTE NANCE on page 19 15 ADJUSTMENT The instructions below describe how each part of the weight system can be adjusted Refer to the exercise guide accompanying this manual to see how the weight system should be set up for each exercise IMPOR TANT When attaching the lat bar or nylon strap make sure that the attachments are in the correct start ing position for the exercise to be performed If there is any slack in the cables or chain as an exercise is performed the effectiveness of the exercise will be reduced ADDING WEIGHTS TO THE WEIGHT CARRIAGE To add resistance to your workout slide an equal amount of weight not included onto each side of the weight tube on the Weight Carriage 19 Make sure that the weights are pushed against the stops Note Due to the cables and pulleys the actual amount of resistance at each exercise station may vary from the amount of weight used Use the WEIGHT RESISTANCE CHART on page 18 to find the actu al amount of resistance at each weight station A WARNING po no
9. Department toll free at 1 800 999 3756 Monday through Friday 6 a m until 6 p m Mountain Time excluding holidays To help us assist you please be prepared to give the following information 1 The MODEL NUMBER of the product WESY17010 2 The NAME of the product WEIDER 15CT weight system 3 The SERIAL NUMBER of the product see the front cover of this manual 4 The KEY NUMBER and DESCRIPTION of the part s see the PART LIST and the EXPLODED DRAWING on pages 22 and 23 of this manual LIMITED WARRANTY ICON Health amp Fitness Inc ICON warrants this product to be free from defects in workmanship and mate rial under normal use and service conditions for a period of ninety 90 days from the date of purchase This warranty extends only to the original purchaser ICON s obligation under this warranty is limited to replacing or repairing at ICON s option the product at one of its authorized service centers All products for which war ranty claim is made must be received by ICON at one of its authorized service centers with all freight and other transportation charges prepaid accompanied by sufficient proof of purchase All returns must be pre autho rized by ICON This warranty does not extend to any product or damage to a product caused by or attribut able to freight damage abuse misuse improper or abnormal usage or repairs not provided by an ICON authorized service center products used for commercial or rental purposes or p
10. ame 36 with a 1 4 Washer 10 and the 1 4 x 2 Screw 24 Press a 1 1 2 Square Inner Cap 32 into the Leg Lever 29 Lubricate the 5 16 x 2 3 4 Bolt 11 Attach the Leg Lever 29 to the Seat Frame 36 with the Bolt and a 5 16 Nylon Locknut 3 Do not over tighten the Nylon Locknut the Leg Lever must pivot freely Insert the two 3 8 x 2 1 2 Eyebolts 35 into the Leg Lever 29 from the directions shown Tighten a 3 8 Washer 9 and a 3 8 Nylon Locknut 21 onto each Eyebolt Note Be sure the Eyebolts are positioned vertically on the Leg Lever 13 26 Rest the Seat Frame 36 on the indicated pin in the Front Upright 42 Attach the Seat Frame to the Front Upright with a 5 16 x 2 3 4 Carriage Bolt 14 and the Seat Knob 40 27 Press 3 4 Round Inner Caps 34 into the ends of both Pad Tubes 28 Insert one Pad Tube 28 into the Seat Frame 36 Slide a Foam Pad 30 onto each end of the Pad Tube Insert the other Pad Tube 28 into the Leg Lever 29 Slide a Foam Pad 30 onto each end of the Pad Tube 14 28 Attach the Curl Pad 74 to the Curl Post 73 with two 1 4 x 3 4 Screws 18 29 Make sure that all parts have been properly tightened The use of all remaining parts will be explained in ADJUSTMENTS beginning on the following page Before using the weight system pull each cable a few times
11. d pulleys that connect the arms to the weights Seat Assembly During the final stage you will assemble the seats and the backrests 1 FRAME ASSEMBLY Before beginning assembly be sure that you have read and understand the information in the box on the previous page Press a 2 Square Outer Cap 51 onto each end of the Stabilizer 5 Press a 2 Square Inner Cap 27 into the end of the Base 4 Insert two 5 16 x 2 3 4 Carriage Bolts 14 up through the Stabilizer 5 Insert two 5 16 x 2 1 2 Carriage Bolts 1 up through the Base 4 Slide the bracket end of the Base 4 onto the 5 16 x 2 3 4 Carriage Bolts 14 in the Stabilizer 5 Slide the Rear Upright 56 onto the Carriage Bolts Hand tighten a 5 16 Nylon Locknut 3 onto each Carriage Bolt Refer to drawing 2a Press a 1 Inner Cap 61 into each end of the weight tube on the Weight Carriage 19 Note The Square Slider Bushings 70 should be pre assembled to the Weight Carriage and Weight Stop 67 Turn the Weight Stop 67 so that the hole in the Weight Stop is oriented in the same direction as the hole in the bottom of the Rear Upright 56 Make sure that the Square Slider Bushing 70 is above the Weight Stop Slide the Weight Stop onto the Rear Upright Refer to drawing 2b Secure the Weight Stop 67 to the hole near the base of the Rear Upright 56 with a 5 16 x 2 3 4 Bolt 11 and a 5 16 Nylon Jamnut 72 S
12. les IMPORTANT While assembling the cables do not overtighten the bolts and nuts securing the pulleys the pulleys must turn freely 9 Locate the Long Cable 58 Route the Long Cable around a 3 1 2 Pulley 15 Using a 3 8 x 3 1 2 Bolt 16 and a 3 8 Nylon Jamnut 25 attach the 3 1 2 Pulley 15 to the Top Frame 55 in the indicated location Be sure that the end of the Cable with the ball is on the indicated side of the Pulley and that the Cable is between the Pulley and the hook on the Top Frame 10 Wrap the Long Cable 58 around a V Pulley 6 Attach the V Pulley and a Long Cable Trap 50 to the indicated bracket on the Front Upright 42 with a 3 8 x 2 1 2 Bolt 7 and a 3 8 Nylon Locknut 21 Be sure that the Long Cable Trap is positioned to hold the Cable in place 11 Route the Long Cable 58 around a V Pulley 6 Attach the V Pulley and a Long Cable Trap 50 to the Left Arm 47 with a 3 8 x 2 1 2 Bolt 7 and a 3 8 Nylon Locknut 21 Be sure that the Cable is in the groove of the Pulley and that the Long Cable Trap is positioned to hold the Cable in place 12 Route the Long Cable 58 around a V Pulley 6 Attach the V Pulley and the Long Cable Trap 50 to the Right Arm 48 with a 3 8 x 2 1 2 Bolt 7 and a 3 8 Nylon Locknut 21 Be sure that the Cable is in the groove of the V Pulley and that a Long Cable Trap is tur
13. leted The Four Stages of the Assembly Process Frame Assembly You will begin by assembling the base and the uprights that form the skeleton of the weight system Arm Assembly During this stage you will assemble the arms and the leg lever Make sure you have the following tools e Two adjustable wrenches e One standard screwdriver One phillips screwdriver One rubber mallet You will also need grease or petroleum jelly a small amount of soapy water and clear tape or masking tape Note Assembly will be more convenient if you have a socket set a set of open end or closed end wrenches or a set of ratchet wrenches How to Identify Parts To help you identify the small parts used in assembly we have included a PART IDENTIFICATION CHART in the center of this manual Place the chart on the floor and use it to easily identify parts during each assembly step Note Some small parts may have been pre attached If a part is not in the parts bag check to see if it has been pre attached How to Orient Parts As you assemble the weight system make sure that all parts are oriented exactly as shown in the draw ings Tightening Parts Tighten all parts as you assemble them unless instructed to do otherwise Questions If you have questions after reading the assembly instructions please call our Customer Service Department at 1 800 999 3756 Cable Assembly During this stage you will attach the cables an
14. lide the Weight Carriage 19 onto the Rear Upright Press a 1 Square Inner Cap 65 into the Front Upright 42 Slide the Front Upright onto the 5 16 x 2 1 2 Carriage Bolts 1 in the Base 4 Hand tighten a 5 16 Nylon Locknut 3 onto each Carriage Bolt Do not tighten the Nylon Locknuts yet 3 Press a 1 3 4 Square Inner Cap 44 into each end of the crossbar on the Top Frame 55 Press two 1 Inner Caps 61 into the top of the crossbar Press a 2 Square Inner Cap 27 into the top of the Rear Upright 56 Attach the Top Frame 55 to the Front Upright 42 with two 5 16 x 2 3 4 Bolts 11 two 5 16 Washers 8 and two 5 16 Nylon Locknuts 3 Attach the Top Frame to the Rear Upright 56 with two 5 16 x 2 1 2 Bolts 22 two 5 16 Washers and two 5 16 Nylon Jamnuts 72 Tighten the Nylon Locknuts used in steps 1 3 ARM ASSEMBLY 4 Press a 1 x 7 8 Plastic Bushing 26 onto each welded spacer on the Press Frame 17 Slide the Press Frame onto the Base 4 so the Plastic Bushings are aligned with the indicated tube Note This will be a tight fit The Plastic Bushings should fit onto the ends of the tube in the Base Lubricate a 3 8 x 8 Bolt 59 Attach the Press Frame 17 to the Base 4 with the Bolt and a 3 8 Nylon Locknut 21 5 Press 8 1 3 4 Square Inner Cap 44 into the top of one of the Press Arms 46 Press
15. m butterfly arms leg lever lat bar or nylon strap while weights are raised The weights will fall with great force Note The weight system does not include weights Make sure that the cables remain on the pul leys at all times If the cables bind while you are exercising stop immediately and make sure that the cables are on all of the pulleys 12 13 14 15 Do not place more than 125 pounds on the weight carriage Always disconnect the lat bar from the weight system when performing an exercise that does not use the lat bar If you feel pain or dizziness at any time while exercising stop immediately and begin cool ing down The decals shown here have been placed on the weight system in the locations shown If a decal is missing or illegible please call our Customer Service Department toll free at 1 800 999 3756 Monday through Friday 6 a m until 6 p m Mountain Time to order a free replacement decal Apply the replace ment decal in the location shown Misuse of this product may result in serious injury Read user s manual and follow all warnings and operating instruc tions prior to use Do not allow children on or around machine Replace label if damaged illegible or removed Keep hands and f fingers clear of this area A WARN ING Before beginning this or any exercise program consult your physician This is especially important for pers
16. mmedi ately The weight system can be cleaned using a damp cloth and mild non abrasive detergent Do not use solvents TIGHTENING THE CABLES Woven cable the type of cable used on the weight system can stretch slightly when it is first used If there is slack in the cables before resistance is felt the cables should be tightened Slack can be removed from the Short Cable 23 by by tightening the 1 4 Nylon Locknut 2 at the end of the Cable Additional slack can be removed by moving the 3 1 2 Pulley 15 to the lower hole in the Long U Bracket 57 Remove the Cable Trap 66 and the Pulley from the U Bracket Re attach the Pulley and the Cable Trap to the lower hole in the U Bracket with the the 3 8 Nylon Locknut 21 and the 3 8 x 2 Bolt 12 Make sure that the Cable Trap is in the proper position and that the Cable and Pulley move smoothly Note If a cable tends to slip off the pulleys the cable may have become twisted Remove the cable and re install it If a cable needs to be replaced see ORDERING REPLACEMENT PARTS on the back cover of this manual 19 CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable 23 and the Long Cable 58 Use the dia gram to be sure that the two cables and the cable traps have been assembled correctly If the cables have not been correctly routed the weight system will not function properly and damage may occur The
17. n Jamnut 1 x 7 8 Plastic Bushing 2 Square Inner Cap Pad Tube Leg Lever Foam Pad Handgrip 1 1 2 Square Inner Cap Curl Knob 3 4 Round Inner Cap 3 8 x 2 1 2 Eyebolt Seat Frame Seat Plate 1 4 x 2 Carriage Bolt Key No Qty 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 gt UP 3 3 HB WHI NW HNONOOND AH RO901A Description Nylon Strap Seat Knob Backrest Front Upright 1 4 x 2 1 2 Screw 1 3 4 Square Inner Cap Foam Pad Press Arm Left Arm Right Arm 1 Round Inner Cap Long Cable Trap 2 Square Outer Cap Chain Cable Clip Lat Bar Top Frame Rear Upright Long U Bracket Long Cable 3 8 x 8 Bolt Butterfly Arm Bushing 1 Inner Cap 1 Round Cover Cap 1 Retainer 5 16 x 5 Bolt 1 Square Inner Cap Cable Trap Weight Stop 3 8 x 3 3 4 Bolt 3 8 x 3 4 Bolt Square Slider Bushing 3 8 x 1 3 4 Bolt 5 16 Nylon Jamnut Curl Post Curl Pad User s Manual Exercise Guide Note indicates a non illustrated part Specifications are subject to change without notice 22 EXPLODED DRAWING Model No WESY17010 R0901A 56 tg b 12 A 57 n 61 2l N 72 15 21 9 we 66 23 ORDERING REPLACEMENT PARTS To order replacement paris call our Customer Service
18. ned to hold the Cable in place 13 Refer to the inset drawing Using a 5 16 x 5 Bolt 64 and a 5 16 Nylon Locknut 3 attach the Pulley Bracket 20 to the indicated bracket on the Top Frame 55 Note The Pulley Bracket is pre assembled with a 3 1 2 Pulley 15 and a Cable Trap 66 Route the Long Cable 58 around the 3 1 2 Pulley 15 attached to the Pulley Bracket 20 Be sure that the Cable is in the groove of the Pulley and that the Cable Trap 66 is turned to hold the Cable in place Make sure that the 3 8 x 2 Bolt 12 securing the Pulley and Cable Trap to the Pulley Bracket is properly tightened and that the Pulley Bracket can pivot freely 14 15 Locate the Long U Bracket 57 that is pre assembled with a 3 1 2 Pulley 15 and a Cable Trap not shown Route the Long Cable 58 around the Pulley and through the Long U Bracket Be sure that the Cable is in the groove of the Pulley that the Cable Trap is turned to hold the Cable in place and that the Cable and Pulley move smoothly Route the Long Cable 58 around a 3 1 2 Pulley 15 Using a 3 8 x 1 3 4 Bolt 71 and a 3 8 Nylon Locknut 21 secure the Pulley to the indi cated bracket on the Top Frame 55 Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly Attach the Long Cable 58 to the Weight Carriage 19 with a 3 8 x 3 4
19. numbers show the correct route for each cable The starting and ending points of each cable are labeled The small drawings show the correct position of each cable trap Make sure that the cable traps do not touch or bind the cables e e 2 1 High Pulley 7 CY YO A DI 9 3 5 d 3 SI Long Cable 58 TOP VIEW 6 5 Long U Bracket Short Cable 23 Weight Carriage 8 Gan 1 Low Pulley NO 20 PART IDENTIFICATION CHART WESY17010 80901 O 1 4 Nylon Locknut 2 5 16 Nylon Locknut 3 q O 5 16 Nylon Jamnut 72 ve 3 8 Nylon Locknut 21 d 4 O 3 4 Round Inner Cap 34 1 Round Inner Cap 49 von O 8 8 Nylon Jamnut 25 KL 1 Round Cover Cap 62 1 4 Washer 10 1 Inner Cap 61 O 1 Retainer 63 a 3 8 Washer 9 1 x 7 8 Plastic Bushing 26 ia 3 8 x 2 1 2 Eyebolt 35 5 16 Washer 8 NAN C 1 4 x 2 Carriage Bolt 38 1 4 x 2 1 2 Screw 43 NAN SN 3 8 x 2 Bolt 12 5 16 x 2 1 2 Bolt 22 AAA 1 4 x 2 Screw 24 AN MT
20. ons over the age of 35 or persons with pre existing health problems Read all instructions before using ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product BEFORE YOU BEGIN Thank you for selecting the versatile WEIDER 15CT weight system The WEIDER 15CT offers a selection of weight stations designed to develop every major muscle group of the body Whether your goal is to tone your body build dramatic muscle size and strength or improve your cardiovascular system the WEIDER 15CT will help you to achieve the specific results you want For your benefit read this manual carefully before using the weight system If you have additional ques ASSEMBLED DIMENSIONS Height 76 in Width 37 in Length 48 in tions please call our Customer Service Department toll free at 1 800 999 3756 Monday through Friday 6 a m until 6 p m Mountain Time excluding holidays To help us assist you please note the product model number and serial number before calling The model number is WESY17010 The serial number can be found on a decal attached to the weight system see the front cover of this manual Before reading further please review the drawing below and familiarize yourself with the parts that are labeled E au High Pulley Station ZB Lat Bar Backrest Seat Butterfly Arms Press Arm Curl Pad Weight Carriage
21. positioned vertically on the Leg Lever 29 ATTACHING THE CURL PAD TO THE SEAT FRAME Set the hooks on the bottom of the Curl Post 73 around the 5 16 x 2 3 4 Bolt 11 in the Seat Frame 36 Secure the Curl Post to the Seat Frame with the Curl Knob 33 ATTACHING THE LAT BAR TO THE LEG LEVER To use the Lat Bar 54 to do curl exercises attach the leg lever to the the the short cable and the curl pad to the seat frame see ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION and ATTACHING THE CURL PAD TO THE SEAT FRAME above Attach the Lat Bar 54 to the front 3 8 x 2 1 2 Eyebolt 35 on the Leg Lever 29 with a Chain 52 and two Cable Clips 53 Note Be sure the Eyebolt is positioned vertically on the Leg Lever 29 17 WEIGHT RESISTANCE CHART This chart shows the approximate weight resistance at each weight station The column labeled WEIGHT ON WEIGHT CARRIAGE refers to the amount of weight in pounds placed on the weight carriage The weight resistance shown for the butterfly arm station is for each butterfly arm Note The actual resistance at each station may vary due to friction between the cables pulleys and weight carriage WEIGHT ON PRESS ARM BUTTERFLY ARM LOW PULLEY HIGH PULLEY WEIGHT Ibs Ibs LEG LEVER Ibs CARRIAGE Ibs 18 TROUBLE SHOOTING AND MAINTENANCE Make sure all parts are properly tightened each time you use the weight system Replace any worn parts i
22. roducts used as store display models No other warranty beyond that specifically set forth above is authorized by ICON ICON is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss loss of property loss of revenues or profits loss of enjoyment or use costs of removal installation or other consequential dam ages of whatsoever nature Some states do not allow the exclusion or limitation of incidental or consequen tial damages Accordingly the above limitation may not apply to you The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein Some states do not allow limitations on how long an implied warranty lasts Accordingly the above limitation may not apply to you This warranty gives you specific legal rights You may also have other rights which vary from state to state ICON HEALTH amp FITNESS INC 1500 S 1000 W LOGAN UT 84321 9813 Part No 178231 RO901A Printed in Canada 2001 ICON Health amp Fitness Inc
23. t place more than 125 pounds on the Weight Carriage 19 ATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH OR LOW PULLEY STATION Attach the Lat Bar 54 to the Long Cable 58 or Short Cable not shown with a Cable Clip 53 For some exercises the Chain 52 should be attached between the Lat Bar and the Cable with two Cable Clips Adjust the length of the Chain between the Lat Bar and the Cable so the Lat Bar is in the cor rect starting position for the exercise to be per formed The Nylon Strap not shown can be attached in the same manner ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame 36 onto the indi cated pins on the Front Upright 42 Attach the Seat Frame to the Front Upright with the 5 16 x 2 3 4 Carriage Bolt 14 and the Seat Knob 40 For some exercises the Seat 13 must be removed First be sure that the chain is not attached to the leg lever see ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION below Next remove the Seat Knob 40 and the 5 16 x 2 3 4 Carriage Bolt 14 from the Seat Frame 36 Finally lift the Seat Frame off of the Front Upright 42 16 ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION To use the Leg Lever 29 the seat must be attached to the front upright see ATTACHING AND REMOV ING THE SEAT on page 16 Attach the Short Cable 23 to the 3 8 x 2 1 2 Eyebolt 35 with a Cable Clip 53 Note Be sure the Eyebolt is
Download Pdf Manuals
Related Search