ViewSonic PJD5112 User's Manual
Contents
1. LED Type Color Status Meaning Power LED Blue Solid The projector is in standby Lamp LED O O mode Temp LED O O Power LED Blue Solid Lamp LED O O Powering up Temp LED O O Power LED Blue Solid Lamp LED O O Normal operation Temp LED O O Power LED Blue Flash Lamp LED O O Power down Temp LED O O Power LED Blue Solid Full brightness The projector system has some Lamp LED Red Solid problems with its fans so the Temp LED Red Flash projector cannot start up Power LED Blue Solid Full brightness The lamp is in good condition Lamp LED Off Off and is projecting at maximum Temp LED Off Off brightness Power LED Blue Solid Full brightness The lamp has reached its end Lamp LED Off Solid of life and must be changed soon The lamp will continue to emp LED off Solid operate until it fails Change the lamp If the lamp is off then the ballast will become malfunction Power LED Blue Flash Full The projector is shutting and brightness the fan motor is cooling the Lamp LED Red Solid for shutdown Do not E unplug the power cord or turn Temp LED Red Solid the power off before the Lamp LED changes to flashing The an motor will turn off when the has cooled Power LED Blue Solid Full brightness Temperature is too high The Lamp LED Red Flash lamp will turn off The fan motor is cooling the lamp Temp LED Red Off Power LED Off Off The lamp ignition failed If Lamp LED Red Solid temperature is too high the ans will2. Polybrominated diphenyl ethers PBDE Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below Examples of exempted components are 1 Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive 2 Lead in glass of cathode ray tubes electronic components fluorescent tubes and electronic ceramic parts e g piezoelectronic devices 3 Lead in high temperature type solders i e lead based alloys containing 85 by weight or more lead 4 Lead as an allotting element in steel containing up to 0 35 lead by weight aluminium containing up to 0 4 lead by weight and as a cooper alloy containing up to 4 lead by weight EN 1 Copyright Information opyright ViewSonic Corporation 2010 All rights reserved Macintosh and Power Macintosh are registered trademarks of Apple Inc Microsoft Windows Windows NT and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries ViewSonic the three birds logo OnView ViewMatch and ViewMeter are registered trademarks of ViewSonic Corporation VESA is a registered trademark of the Video Electronics Standards Association DPMS and DDC are trademarks of VESA PS 2 VGA and XGA are registered trademarks of International Business Machines Corporation Disclaimer ViewSonic Corporation shall
3. User Memorize user s settings White Board For white projection screen type Black Board For black projection screen type Green Board For green projection screen type W Daylight Mode For a daylight environment White Intensity Increase the brightness of white areas EN 20 Effect the represent of dark scenery With greater gamma value dark scenery will look brighter 3D Sync Off Disable 3D function 3D Vision For NVIDIA 3D Vision application DLP LINK For TI 3D DLP LINK application 3D Sync Invert for TI 3D DLP LINK only E Invert left and right frame contents W Off Default frame contents Computer Image Computer Mode Frequency Adjust the timing of the projector relative to the computer Tracking Adjust the phase of the projector relative to the computer H Position Horizontal Position Adjust the image left or right within the projection area V Position Vertical Position Adjust the image up or down within the projection area Video Image Video Mode Saturation Adjust a video image from black and white to fully saturated color Sharpness Sharpen or soften the image Tint Shift colors toward red or green Sound Computer Video Mode Volume Adjust the volume level Mute Cut off the sound temporarily Setting Computer Video Mode Menu Position Choose the menu location on the display screen Projection Adjust the picture to match the or
4. 86 D1 2F 00 00 00 00 00 06 Blank Screen Video BE EF 02 06 00 DF DF 66 00 00 00 00 00 06 Keystone BE EF 02 06 00 3D DE 64 00 00 00 00 00 06 Keystone Up BE EF 03 06 00 10 DB 65 00 00 00 00 00 06 Down BE EF 03 06 00 23 DB 66 00 00 00 00 00 06 Image BE EF 03 06 00 F2 DA 67 00 00 00 00 00 06 Aspect Ratio EF 03 06 00 OD DA 68 00 00 00 00 00 06 Factory Reset EF 03 06 00 6B DA 6E 00 00 00 00 00 06 Lamp Hour BE EF 03 06 00 BA DB 6F 00 00 00 00 00 Lamp Hour Firmware Version BE EF 03 06 00 05 09 70 00 00 00 00 00 Version System Status BE EF 03 06 00 04 D8 71 00 00 00 00 00 03 Projector Ne Mode EN 32 o N O A N y Ha a E Wire List COLOR 2 Black Brown Red Orange Yellow Green Blue j on A N gt Purple N on BY gt White SHELL Dw SHELL EN 33 IR Control Code D CI P lt gt O 62 oO EEES CODO ViewSonic EN 34 Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 13 87 S
5. www viewsonic com T Toll Free 1 800 688 6688 T Toll 1 424 233 2530 F 1 909 468 3757 service us viewsonic com Limited Warranty VIEWSONIC PROJECTOR What the warranty covers ViewSonic warrants its products to be free from defects in material and workmanship under normal use during the warranty period If a product proves to be defective in material or workmanship during the warranty period ViewSonic will at its sole option repair or replace the product with a like product Replacement product or parts may include remanufactured or refurbished parts or components Limited Three 3 year General Warranty Subject to the more limited one 1 year warranty set out below North and South America Three 3 years warranty for all parts excluding the lamp three 3 years for labor and one 1 year for the original lamp from the date of the first consumer purchase Europe except Poland Three 3 years warranty for all parts excluding the lamp three 3 years for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Poland Two 2 years warranty for all parts excluding the lamp two 2 years for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Limited One 1 year Heavy Usage Warranty Under heavy usage settings where a projector s use includes more than fourteen 14 hours average daily usage North and South America One 1
6. Computer Video Mode Blank Screen Blank the screen temporarily and select the screen color when this function is active Password EN 22 Set change the password When the password function is added image projection will require to input the preset password when turning on the projector Screen Capture Capture the current projection screen as a start up screen Start up Screen Select start up screen when the projector is powered on or when no signal is input User is the screen that you captured Zoom Zoom in and out the images DCR Dynamic Contrast Ratio Enable DCR will further enhance contrast ratio by darkening the black scenes Disable DCR will resume to normal contrast performance DCR will impact lamp life and system noise performance Closed Caption Enable or Disable closed captions by selecting CC1 closed caption1 the most common channel CC2 CC3 CC4 T1 T2 or OFF Brilliant Color Produce an expanded on screen color spectrum that delivers enhanced color saturation for bright true to life images Suggesting to turn Off for most video sources and On for most computer sources Green Mode Enable this function when power consumption is under 1W Language Computer Video Mode Select the language used by the on screen menu Factory Default Computer Video Mode Restore settings to factory default System Info Computer Video Mode Source Display the current input source Resolution
7. Use four directional buttons to select items or make adjustments to your selection ENTER Enter to sub menu and confirm the menu selection SOURCE Manually select an input source MENU EXIT Display or exit the on screen display menus b Power Turn the projector on or off o o 8 EN 9 Connection Ports o 8 86 Ej 0 GE 20 CEE O 39 G oss l L moron our L covevreni i 1 coweuren w2 L voeo 4 USB This connector is for firmware update and mouse function support VIDEO Connect composite video output from video equipment to this jack S VIDEO Connect S Video output from video equipment to this jack MONITOR OUT Connect to a computer display etc COMPUTER IN 1 Connect image input signal analog RGB or component to this jack RS 232 When operating the projector via a computer connect this to the controlling computer s RS 232C port COMPUTER IN 2 Connect image input signal analog RGB or component to this jack 12V OUT 12V DC out AUDIO IN Connect an audio output from video equipment to this jack AUDIO OUT Connect to a speaker or other audio input equipment EN 10 Remote Control POWER Turn the projector on or off Four directional buttons Use four directional buttons to select items or make adjustments to your selection MENU Display or exit t
8. and the other end is plugged into an outlet with power Press the power button again W Unplug the power cord and wait for a short while then plug it in and press the power button again Image problems If the searching source is displayed the SOURCE button on the control panel or the Source button on the remote control one or more times to select another active input source Be sure the external source is turned on and connected computer connection ensure your notebook computer s external video port is turned on Refer to the computer manual If the image is out of focus W Be sure the lens cover is removed W While displaying the on screen menu adjust the focus ring The image size should not change if it does you are adjusting the zoom not the focus Check projection lens to see if it needs cleaning If the image is flickering or unstable for a computer connection the Auto button on the remote control W Press the MENU button go to Computer Image and adjust Frequency or Tracking Remote control problems If the remote control does not operate sure nothing is blocking the remote control receiver on the front of the projector Use the remote control within the effective range Aim the remote control at the screen or at the front or back of the projector the remote control so it is more directly in front of or behind the projector and n
9. cool the lamp Temp LED Red Solid EN 28 Compatibility Modes Computer Compatibility Resolution H Sync KHz V Sync Hz VGA 640 x 480 24 6 50 0 31 5 59 9 37 9 72 8 37 5 75 0 43 3 85 0 640 x 480 120Hz 61 9 119 5 720 x 400 31 5 70 0 37 9 85 0 SVGA 800 x 600 31 0 50 0 35 2 56 0 37 9 60 3 48 1 72 0 46 9 75 0 53 7 85 1 76 3 120 0 800 x 600 120Hz 76 3 120 0 XGA 1024 x 768 48 4 60 0 56 5 70 1 60 0 75 0 68 7 85 0 97 6 120 0 1024 x 768 120Hz 97 6 120 0 1152 x 864 67 5 75 0 1280 x 960 60 0 60 0 85 9 85 0 SXGA 1280 x 1024 64 0 60 0 80 0 75 0 1280 x 960 64 7 60 0 75 0 75 0 1280 x 1024 64 0 60 0 80 0 75 0 14460 x 1050 64 7 60 0 1600 x 1200 75 0 60 0 EN 29 Video Signal Horizontal Frequency kHz Vertical Frequency Hz 1080i 33 8 60 0 1080i 28 1 50 0 1080p 67 5 60 0 1080p 56 3 50 0 720p 45 0 60 0 720p 37 5 50 0 576p 31 3 50 0 576i 15 8 50 0 480p 31 5 60 0 480i 15 8 60 0 EN 30 Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs If the problem persists contact your local reseller or service center Please refer to LED Indicator Messages as well Start up problems If no lights turn on Be sure that the power cord is securely connected to the projector
10. of goodwill interference with business relationships or other commercial loss even if advised of the possibility of such damages 2 Any other damages whether incidental consequential or otherwise 3 Any claim against the customer by any other party Effect of state law This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow limitations on implied warranties and or do not allow the exclusion of incidental or consequential damages so the above limitations and exclusions may not apply to you Sales outside the U S A and Canada For warranty information and service on ViewSonic products sold outside of the U S A and Canada contact ViewSonic or your local ViewSonic dealer The warranty period for this product in mainland China Hong Kong Macao and Taiwan Excluded is subject to the terms and conditions of the Maintenance Guarantee Card For users in Europe and Russia full details of warranty provided can be found in www viewsoniceurope com under Support Warranty Information 4 3 Projector Warranty PRJ LWOI Rev 1h 06 25 07 Limited Warranty VIEWSONIC PROJECTOR What the warranty covers ViewSonic warrants its products to be free from defects in material and workmanship under normal use during the warranty period If a product proves to be defective in material or workmanship during the warranty period ViewSonic will at its sole
11. of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage We recommend replacing the lamp if a warning message is displayed Do not attempt to replace the lamp yourself Contact the qualified service personnel for replacement The lamp is extremely hot right after turning off the projector If you touch the lamp you may scald your finger When you replace the lamp wait for at least 45 minutes for the lamp to cool down Do not touch the lamp glass at any time The lamp may explode due to improper handling including the touching of the lamp glass Lamp lifetime may differ from lamp to lamp and according to the environment of use There is no guarantee of the same lifetime for each lamp Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps A lamp may explode as a result of vibration shock or degradation as a result of hours of use as its lifetime draws to an end Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used Wear protective gloves and eyeglasses when fixing or detaching the lamp Faster on off cycles will damage the lamp and reduce lamp life Wait at least for 5 minutes to turn off the projector after powering on Do not operate the lamp in proximity to paper cloth or other combustible material nor cover it with such materials Do not operate the lamp in an atmosphere containing an infla
12. Display current input source resolution H Frequency Display current image horizontal frequency V Frequency Display current image vertical frequency EN 23 Maintenance The projector needs proper maintenance You should keep the lens clean as dust dirt or spots will project on the screen and diminish image quality If any other parts need replacing contact your dealer or qualified service personnel When cleaning any part of the projector always switch off and unplug the projector first Warning Never open any of the covers on the projector Dangerous electrical voltages inside the projector can cause severe injury Do not attempt to service this product yourself Refer all servicing to qualified service personnel Cleaning the Lens Gently wipe the lens with lens cleaning paper Do not touch the lens with your hands Cleaning the Projector Housing Gently wipe with a soft cloth If dirt and stains are not easily removed use a soft cloth damped with water or water and neutral detergent and wipe dry with a soft dry cloth Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work Make sure the lens is cool before cleaning Do not use detergents or chemicals other than those noted above Do not use benzene or thinners Do not use chemical sprays Use a soft cloth or lens paper only EN 24 Replacing the Lamp As the projector operates over time the brightness
13. Distrito Federal QPLUS S A de Coyoacan 931 Col Del Valle 03100 M xico D F Tel 01 52 55 50 00 27 35 E Mail gacosta qplus com mx Guerrero Acapulco GS Computaci n Grupo Sesicomp Progreso 6 A Colo Centro 39300 Acapulco Guerrero Tel 744 48 32627 MERIDA ELECTROSER Av Reforma No 403Gx39 y 41 M rida Yucatan M xico CP97000 Tel 52 999 925 1916 E Mail rrrb sureste com Tijuana STD Ferrocarril Sonora 3780 L C Col 20 de Noviembre Tijuana Mexico 4 3 ViewSonic Mexico Limited Warranty AV GREGORIO MENDEZ 1504 COL FLORIDA C P 86040 Tel 01 993 3 52 00 47 3522074 3 52 20 09 E Mail compumantenimientos prodigy net mx Veracruz Ver CONEXION Y DESARROLLO S A DE C V Av Americas 419 ENTRE PINZON Y ALVARADO Fracc Reforma 91919 Tel 01 22 91 00 31 67 E Mail gacosta qplus com mx Cuernavaca Compusupport de Cuernavaca SA de CV Francisco Leyva 178 Col Miguel Hidalgo C P 62040 Cuernavaca Morelos Tel 01 777 3180579 01 777 3124014 E Mail aquevedo compusupporteva com Guadalajara Jal SERVICRECE S A de C V Av Ni os H roes 2281 Col Arcos Sur Sector Ju rez 44170 Guadalajara Jalisco Tel 01 52 33 36 15 15 43 E Mail mmiranda servicrece com Monterrey Global Product Services Mar Caribe 1987 Esquina con Golfo P rsico Fracc Bernardo Reyes CP 64280 Monterrey N L M xico Tel 8129 5103 E Mail aydeem gps1 com mx
14. Oaxaca Oax CENTRO DE DISTRIBUCION Y SERVICIO S A de C V Murgu a 708 P A Col Centro 68000 Oaxaca Tel 01 52 95 15 15 22 22 Fax 01 52 95 15 13 67 00 E Mail gpotai2001 hotmail com FOR USA SUPPORT ViewSonic Corporation 381 Brea Canyon Road Walnut CA 91789 USA Tel 800 688 6688 English 866 323 8056 Spanish Fax 1 800 685 7276 E Mail http www viewsonic com PRJ_LW03 Rev 1A 06 25 07 1 ViewSonic
15. Save the original shipping carton and Packing material they will come in handy if you ever to ship your unit for maximum protection repack your unit as it was originally packed at the factory Contact you dealer immediately if any items are missing appear damaged or EN 6 Projector Overview Front View 0000090 0000 Lens cap Elevator button Lens cap strap Projection lens Front IR remote control sensor Ventilation holes intake Jl 8606009 De pe 4 e Speaker Focus ring Zoom ring Control panel Lamp cover EN 7 Connection ports AC power socket Kensington lock Rear IR remote control sensor Ventilation holes exhaust Security bar 909000008 Bottom View 143 0mm Ceiling mount M46 e Tiltadjustment feet not included in the package gt This projector can be used with a ceiling mount for support The ceiling mount is Contact your dealer for information to mount the projector on a ceiling EN 8 Using the Product Control Panel LED O b Power Power LED indicator Refer to LED Indicator Messages TEMP Temperature LED indicator Refer to LED Indicator Messages LAMP Lamp LED indicator Refer to LED Indicator Messages Button Function O W Mkeystone Manually correct distorted images resulting from an angled projection Four directional buttons
16. ViewSonic PJD5112 DLP Projector IMPORTANT Please read this User Guide to obtain important information on install ing and using your product in a safe manner as well as registering your product for future service Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation which is also found on our web site at http www viewsonic com in English or in specific languages using the Regional selection box in the upper right comer of our website Antes de operar su equipo lea cuidadosamente las instrucciones en este manual ViewSonic User Guide Guide de Putilisateur Bedienungsanleitung Gu a del usuario Guida Guia do usu rio Anv ndarhandbok K ytt opas 2 2585 8 ASZ AL 1 Podrecznik uzytkownika Kullan c k lavuzu Model No VS12618 Compliance Information FCC Statement This device complies with part 15 of FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of FCC Rules These limits are designed
17. ation Connecting the Projector O USB Cable VGA D Sub to HDTV RCA Cable e VGA Cable D Sub to D Sub Composite Video Cable RS 232 Cable O S Video Cable Audio Cable Laptop type Desktop type 9 oa u d EE Video Source example Component video output equipment such as DVD player or Seltop high definition TV source E should be disconnected from AC outlet The figure above a sample connection This does not mean that all of these devices can or must be connected simultaneously The cables that come with the projector may differ from the above illustration The included cables are based on actual shipment delivery W When connecting cable power cords of both projector and external equipment EN 14 Powering On Off the Projector Powering On the Projector 1 Remove the projector lens cap 2 Complete the AC power cord and peripheral signal cable s connections 3 Press b button to turn on the projector The projector takes a minute or so to warm up 4 Turn on your source computer notebook DVD etc The projector automatically detects your source Ifyou are connecting multiple sources to the projector simultaneously press the SOURCE button on the control panel or the Source
18. button on the remote control Warning W Remove the lens cap first before powering on W Never look into the lens when the lamp is on This can damage your eyes W This focal point concentrates high temperature Do not place any object near it to avoid possible fire hazard Powering Off the Projector 1 Press D button to turn off the projector lamp You will see a message Power off Press Power again appear on the screen 2 Press l button again to confirm W The cooling fans continue to operate for cooling cycle W When the Lamp LED begins flashing the projector has entered stand by mode If you want to turn the projector back on you must wait until the projector has completed the cooling cycle and has entered stand by mode Once in stand by mode simply press 1 button to restart the projector 3 Disconnect the AC power cord from the electrical outlet and the projector 4 Donotturn on the projector right after power off EN 15 Adjusting the Projector Adjusting the Projector Height Tilt adjustment foot Elevator foot Elevator button The projector is equipped with an elevator foot to adjust the image height To raise or lower the image 1 To raise or lower the image press the elevator button and raise or lower the front of the projector Release the button to lock the adjustment 2 Tolevel the image on the screen turn the tilt adjustment foot to fine tune the height adjustment foot are fully re
19. ca Argentina www viewsonic com la T 0800 4441185 soporte viewsonic com Latin America Chile www viewsonic com la T 1230 020 7975 soporte viewsonic com Latin America Columbia www viewsonic com la T 01800 9 157235 soporte viewsonic com Latin America Mexico www viewsonic com la T 001 8882328722 soporte viewsonic com Renta y Datos 29 SUR 721 COL Electroser Av Reforma No 403Gx39 y 41 97000 Merida Yucatan Tel 01 999 925 19 16 LA PAZ 72160 PUEBLA PUE Tel 01 222 891 55 77 10 LINEAS Other places please refer to http www viewsonic com la soporte index htm Mexico Latin America Peru www viewsonic com la T 0800 54565 soporte viewsonic com Macau www hk viewsonic com T 853 2870 0303 service hk viewsonic com Middle East ap viewsonic com me Contact your reseller service ap viewsonic com Puerto Rico amp Virgin Islands www viewsonic com T 1 800 688 6688 English T 1 866 379 1304 Spanish F 1 909 468 3757 service us viewsonic com soporte viewsonic com Singapore Malaysia Thailand www viewsonic com sg T 65 6461 6044 service sg viewsonic com South Africa ap viewsonic com za Contact your reseller service ap viewsonic com United Kingdom www viewsoniceurope com uk www viewsoniceurope com uk support call desk service_gb viewsoniceurope com United States
20. ced by an incorrect type Dispose of used batteries according to the instructions sure the plus and minus terminals are correctly aligned when loading a battery v Keep the battery out of the reach of children Do not recharge the battery or expose the battery to fire or water Do not dispose the used battery along with household waste Dispose i batteries according to local regulations Danger of explosion may happen if batteries are incorrectly replaced Replace only with the same type recommended by the manufacturer Battery should not be in or near to fire or water keep batteries in a dark and dry place If suspect battery leakage wipe out the leakage and then replace a new bat the leakage adheres to your body or clothes rinse well with water immediai EN 12 Remote Control Operation Point the remote control at the infrared remote sensor and press a button Operating the projector from the front Operating the projector from the rear The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor Operate the remote control from a position where the remote sensor is visible Do not drop the remote control or jolt it Keep the remote control out of locations with excessively high temperature or humidity Do not get water on the remote control or place wet objects on it Do not disassemble the remote control EN 13 Install
21. ct any feature in the main menu 3 After selecting the desired main menu item press gt to enter sub menu for feature setting 4 Use A select the desired item and adjust the settings with lt gt 5 Press the MENU button the screen will return to the main menu 6 exit OSD Press the MENU button again The OSD menu will close and the projector will automatically save the new settings Picture Computer Video Mode Brightness Brighten or darken the image Contrast Set the difference between light and dark areas Color Setting Adjust the color temperature At higher temperature the screen looks colder at lower temperature the screen looks warmer If you select User then you can change the intensity of each of 3 color Red Green Blue to customize user color temperature User Color User Color provides six sets RGBCMY of colors to be adjusted When you select each color you can independently adjust its range and saturation according to your preference Keystone Manually correct distorted images resulting from an angled projection Aspect Ratio Select how the picture fits on the screen 43 The input source will be scaled to fit the projection screen W 16 9 Theinput source will be scaled to fit the width of the screen Image There are many factory presets optimized for various types of images For computer or notebook Movie For home theater sRGB For PC standard color
22. e projector Wi Do not use the projector in a smoky environment Smoke residue may build up on critical parts and damage the projector or its performance Wi Consult with your dealer for special installation such as suspending from a ceiling EN 17 The projector has multilingual on screen display menus that allow you to make image adjustments and change a variety of settings Leer o e _ Sc a MRNA eee PG Movia aRGB User Whita Board Black Board Groon Board Daylight Mode ww Ho __ m mor ee ew L wwe L __ 1 ot in 1 sr cuum EN 18 Black Blue Gray Red Green Blank Screen C esten Password Input Password Screen Capture 9 7 Lm Closed Caption Ti T2 ST English Deutsch Frangais Espa ol Italiano 51801 Portugu s MAH BAB Nederlands Svenska Suomi Polski EDEN L Resolution Frequency L Frequency 1 Adjustable range and default setting vary depending on signal type 2 This function is only available when the projector is installed an optional filter cover EN 19 How to operate 1 Press the MENU button to open the OSD menu 2 When OSD is displayed use A to sele
23. ease contact your sales dealer This projector is equipped with a grounding type AC line plug Please ensure that your outlet fits the plug Do not defeat the safety purpose of this grounding type plug We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent signal interference due to voltage fluctuations y D y For Australia and For the U S A and Canada Mainland China For Continental Europe For the U K EN 3 CONTENTS Introduction cinco Projector FEU Si A A de 5 Package Contents AA Ses 6 Projector Overview 7 Using the Product e rrererneneneenens D Control Panel siii en Eee HB Re EATER ce s 9 Connection Ports Remote Control 2 Replacing the Battery 12 Remote Control OperatiOn 3 rie ii te itd etre eet c eene a 13 Installation Connecting the Projector ener nnne 14 Powering On Off the Projector cceccesceeseeeeceeeeeeeteneseneceneceeeceeesaeesaeeeaeeeneeeeeeaeees 15 Adj sting ThE Projector cita eo eere ride dn rere Ere 16 Menu Operation 24 Maintenance Cleaning the Lens Cleaning the Projector Housing 24 Replacing the Lamp Specifications OF LED Indicatoii Messages oe c
24. er fluctuations or failure h Use of supplies or parts not meeting ViewSonic s specifications i Normal wear and tear j other cause which does not relate to a product defect 3 Removal installation and set up service charges How to get service 1 Forinformation about receiving service under warranty contact ViewSonic Customer Support please refer to Customer Support page You will need to provide your product s serial number 2 obtain warranted service you will be required to provide a the original dated sales slip b your name c your address d a description of the problem and e the serial number of the product 3 Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic 4 For additional information or the name of the nearest ViewSonic service center contact ViewSonic Limitation of implied warranties There are no warranties express or implied which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose Exclusion of damages ViewSonic s liability is limited to the cost of repair or replacement of the product ViewSonic shall not be liable for 1 Damage to other property caused by any defects in the product damages based upon inconvenience loss of use of the product loss of time loss of profits loss of business opportunity loss
25. ete e 28 Compatibility Modes ai Dia 29 TrouBIESHOOtING E EE E E 31 RS 232 Command and Configuration IR Control Code EN 4 Introduction Projector Features The projector integrates high performance optical engine projection and a user friendly design to deliver high reliability and ease of use The projector offers the following features Single chip 1 397cm 0 55 Texas Instruments DLP technology SVGA 800 x 600 pixels Auto image re sizing Auto Sync to 800 x 600 full screen with scaling compression compatibility for VGA SVGA XGA and SXGA Compatibility with Macintosh computers Compatibility with NTSC PAL SECAM and HDTV D Sub 15 pin terminal for analog video connectivity User friendly multi language on screen display Advanced electronic keystone correction RS 232 connector for serial control Wi The reproduction transfer or copy of all or any part of this document is not The information this manual is subject to change without notices permitted without express written consent EN 5 Package Contents When you unpack the projector make sure you have all these components Projector with Lens Cap AC Power Cord Quick Start Guido ViewSonic CD Wizard Quick Start Guide VGA Cable D SUB to D SUB Optional accessories RS232 cable RGB to component adapter P N J2552 0208 00 P N J2552 0212 00 the unit does not work
26. he on screen display menus Enter Confirmed selections Exit Exit OSD Menu Adjust image distortion caused by tilting the projector Magni Zoom in and out the images Source Manually select an input source Auto Resynchronize the projector to the input signal from a computer This function is available for computer mode only Mouse Switch between OSD control and Mouse control Apply to Navigation buttons Enter Mouse Left Click and Exit Mouse Right Click buttons ViewM Switch in between high brightness performance or Accuracy color performance 90000 086 68000 ViewSonic Freeze Press Freeze to pause the screen image Press again to cancel the freeze function Mute Cut off the sound temporarily Press again to cancel the Mute function Blank Cut off the screen temporarily Press again to cancel the Blank Screen function Volume Adjust the volume level EN 11 Replacing the Battery For the first time use Remove the transparent insulation tape by pulling it before use For battery change 1 Push the catch to the left and remove the battery holder 2 Remove the old Lithium coin cell and install new one CR2025 Ensure that the side with the mark is up 3 Push the battery holder back into the remote control until you feel a click Caution Risk of explosion if battery is repla
27. he product damages based upon inconvenience loss of use of the product loss of time loss of profits loss of business opportunity loss of goodwill interference with business relationships or other commercial loss even if advised of the possibility of such damages 2 other damages whether incidental consequential or otherwise Any claim against the customer by any other party 4 Repair or attempted repair by anyone not authorized by ViewSonic Contact Information for Sales amp Authorized Service Centro Autorizado de Servicio within Mexico Name address of manufacturer and importers M xico Av de la Palma 8 Piso 2 Despacho 203 Corporativo Interpalmas Col San Fernando Huixquilucan Estado de M xico Tel 55 3605 1099 http www viewsonic com la soporte index htm N MERO GRATIS DE ASISTENCIA T CNICA PARA TODO M XICO 001 866 823 2004 Hermosillo Villahermosa Distribuciones y Servicios Computacionales SA de CV Compumantenimietnos Garantizados S A de C V Calle Juarez 284 local 2 Col Bugambilias C P 83140 Tel 01 66 22 14 9005 E Mail disc2 ghmo megared net mx Puebla Pue Matriz RENTA Y DATOS S A DE C V Domicilio 29 SUR 721 COL LA PAZ 72160 PUEBLA PUE Tel 01 52 222 891 55 77 CON 10 LINEAS E Mail datos puebla megared net mx Chihuahua Soluciones Globales en Computaci n C Magisterio 3321 Col Magisterial Chihuahua Chih Tel 4136954 E Mail Cefeo soluglobales com
28. ientation of the projector upright or upside down in front of or behind the screen Invert or reverse the image accordingly EN 21 Signal Specify the source to the COMPUTER IN 1 COMPUTER IN 2 terminal that you wish to project Auto Automatically detect the input signal type from COMPUTER IN 1 and COMPUTER IN 2 terminals RGB For VGA signal YCbCr YPbPr For component signal Lamp Hours Display the lamp s elapsed operating time in hours Lamp Hours Reset Reset the lamp Hour to 0 hours Filter Mode Use this function to activate filter mode after the projector is installed an optional filter cover Filter Hours Display the filter s elapsed operating time in hours a When Filter Mode is turned on the Filter Hours also turns on automatically Filter Hours Reset Reset the filter Hour to 0 hours Power Saving If no operation is performed for a specific period of time projector will automatically turn off Auto Source Automatically scan through all the input source ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life This function will be unavailable when the DCR function is on High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector OSD Timeout Duration of OSD menu display countly starts at idle state by second Option
29. ing walked on or pinched particularly at plugs Convenience receptacles and the point where they exit from the unit Be sure that the power outlet is located near the unit so that it is easily accessible Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer sold with the unit When a cart is used use caution when moving the cart unit combination to avoid injury from tipping over Unplug this unit when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as if the power supply cord or plug is damaged if liquid is spilled onto or objects fall into the unit if the unit is exposed to rain or moisture or if the unit does not operate normally or has been dropped EN ii Declaration of ROHS Compliance This product has been designed and manufactured in compliance with Directive 2002 95 EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS Directive and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee TAC as shown below Proposed Maximum Actual Concentration Concentration Substance Mercury Hg Cadmium Cd Hexavalent Chromium Polybrominated biphenyls
30. ion insurance and set up service charges to get service For information about receiving service under warranty contact ViewSonic Customer Support Please refer to the attached Customer Support page You will need to provide your product s serial number so please record the product information in the space provided below on your purchase for your future use Please retain your receipt of proof of purchase to support your warranty claim For Your Records Product Name Model Number Document Number Serial Number Purchase Date Extended Warranty Purchase Y N If so what date does warranty expire 1 To obtain warranty service you will be required to provide a the original dated sales slip b your name c your address d a description of the problem and e the serial number of the product 2 Take or ship the product in the original container packaging to an authorized ViewSonic service center 3 Round trip transportation costs for in warranty products will be paid by ViewSonic Limitation of implied warranties There are no warranties express or implied which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose Exclusion of damages ViewSonic s liability is limited to the cost of repair or replacement of the product ViewSonic shall not be liable for 1 Damage to other property caused by any defects in t
31. mmable substance such as thinner Thoroughly ventilate the area or the room when operating the lamp in an oxygen atmosphere in the air If ozone is inhaled it could cause headaches nausea dizziness and other symptoms The inorganic mercury is involved in the lamp If the lamp bursts the mercury inside the lamp will be exposed Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes Otherwise it could be harmful to user s health EN 25 Turn off the projector If the projector is installed in a ceiling mount remove it Unplug the power cord Loosen the screw in the side of the lamp cover and remove the cover Remove the screws from the lamp module raise the handle and lift out the module Insert the new lamp module into the projector and tighten the screws Replace the lamp cover and tighten the screw 8 Turn on the projector If the lamp does not turn on after the warm up period try reinstalling the lamp 9 Reset the lamp hour Refer to the Setting menu SANA Dispose the used lamp according to local regulations Ensure that screws are tightened properly Screws not tightened fully may result in injury or accidents Since the lamp is made of glass do not drop the unit and do not scratch the glass Do not reuse the old lamp This could cause the lamp to explode Be sure to turn off the
32. not be liable for technical or editorial errors or omissions contained herein nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product In the interest of continuing product improvement ViewSonic Corporation reserves the right to change product specifications without notice Information in this document may change without notice No part of this document may be copied reproduced or transmitted by any means for any purpose without prior written permission from ViewSonic Corporation Product Registration To meet your future needs and to receive any additional product information as it becomes available please register your product on the Internet at www viewsonic com The ViewSonic Wizard DVD ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic For Your Records Product Name PJD5112 ViewSonic DLP Projector Model Number VS12618 Document Number PJD5112_UG_ENG Rev 1C 04 19 10 Serial Number Purchase Date The lamp in this product contains mercury Please dispose of in accordance with local state or federal laws EN 2 Notes the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used If the supplied AC Power Cord does not match your AC outlet pl
33. option repair or replace the product with a like product Replacement product or parts may include remanufactured or refurbished parts or components amp accessories How long the warranty is effective 3 years for all parts excluding the lamp 3 years for labor 1 year for the original lamp from the date of the first consumer purchase Lamp warranty subject to terms and conditions verification and approval Applies to manufacturer s installed lamp only All accessory lamps purchased separately are warranted for 90 days Who the warranty protects This warranty is valid only for the first consumer purchaser What the warranty does not cover 1 Any product on which the serial number has been defaced modified or removed 2 Damage deterioration or malfunction resulting from a Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification unauthorized attempted repair or failure to follow instructions supplied with the product Any damage of the product due to shipment Causes external to the product such as electrical power fluctuations or failure Use of supplies or parts not meeting ViewSonic s specifications Normal wear and tear Any other cause which does not relate to a product defect 3 Any product exhibiting a condition commonly known as image burn in which results when a static image is displayed on the product for an extended period of time 4 Removal installat
34. ot as far to the side EN 31 RS 232 Command and Configuration Baud Rate 19200 Parity Bit none Data Bit 8 Stop Bit 1 Assign Port COM1 Name e CRC Header Command Response ON BE EF 10 05 00 C6 FF 11 11 01 00 01 00 06 EF 03 06 00 DB 69 00 00 00 00 00 06 Analog EF 03 19 00 19 29 01 47 02 00 06 YCbCr BE EF 03 19 00 89 E8 01 47 02 CC CC 00 06 Source S Video EF 03 19 00 E8 69 01 47 02 CC 00 06 Composite EF 03 19 00 78 A8 01 47 02 CC CC 00 06 Video HDTV Y Pb BE EF 03 19 00 DA 2B 01 47 02 CC CC 00 06 Pr Menu EF 02 06 00 E9 D3 30 00 00 00 00 00 06 Up EF 02 06 00 60 02 34 00 00 00 00 00 06 OSD Down EF 02 06 00 0B D2 32 00 00 00 00 00 06 Left EF 02 06 00 DA D3 33 00 00 00 00 00 06 Right EF 02 06 00 38 02 31 00 00 00 00 00 06 EF 03 06 00 6A 00 00 00 00 00 06 Off BE EF 03 06 00 3E DA 6B 00 00 00 00 00 06 Auto On EF 03 06 00 89 DB 6C 00 00 00 00 00 06 Source Off BE EF 03 06 00 58 DA 6D 00 00 00 00 00 06 Source EF 02 06 00 57 00 2E 00 00 00 00 00 06 Auto Sync BE EF 02 06 00
35. ource NEC 83 F4 13 02 Up NEC 83 F4 13 82 Down NEC 83 F4 13 85 Left NEC 83 F4 13 83 Right NEC 83 F4 13 81 MENU NEC 83 F4 13 84 Auto NEC 83 F4 13 64 Mouse NEC 83 F4 13 6B ViewMatch NEC 83 F4 13 63 Freeze NEC 83 F4 13 80 Enter NEC 83 F4 13 8c Mouse Left Exit NEC 83 F4 13 8d Mouse Right KeyS NEC 83 F4 13 86 KeyS NEC 83 F4 13 8a Digital NEC 83 F4 13 68 Zoom Digital NEC 83 F4 13 Zoom Volume NEC 83 F4 13 88 Volume NEC 83 F4 13 89 Mute NEC 83 F4 13 8b Blank NEC 83 F4 13 8f Customer Support For technical support or product service see the table below or contact your reseller Note You will need the product serial number Country Region Web Site T Telephone F Fax E mail Australia New Zealand WWw viewsonic com au AUS 1800 880 818 NZ 0800 008 822 service au viewsonic com T Toll Free 1 866 463 4775 Canada www viewsonic com T Toll 1 424 233 2533 service ca viewsonic com F 1 909 468 3757 Europe www viewsoniceurope com www viewsoniceurope com uk Support Calldesk htm Hong Kong www hk viewsonic com T 852 3102 2900 service hk viewsonic com India www in viewsonic com T 1800 11 9999 service in viewsonic com Treland Eire www viewsoniceurope com uk www viewsoniceurope com uk support call desk service_ie viewsoniceurope com Korea www kr viewsonic com T 080 333 2131 service kr viewsonic com Latin Ameri
36. projector and unplug the AC power cord before replacing the lamp Do not use the projector with the lamp cover removed EN 26 Specifications Display system Single 1 397cm 0 55 DLP panel Resolution SVGA 800 x 600 Zoom 1 2X F No 2 54 2 78 Focal length 18 36 22 02mm Screen size 101 6cm 762cm 40 300 Lamp 180W Input terminal D Sub 15 pin x 2 S VIDEO x 1 VIDEO x 1 Audio signal input 3 5 mm stereo mini jack x 1 Output terminal D Sub 15 pin x 1 Audio signal output 3 5 mm stereo mini jack x 1 12 Vdc trigger output x 1 Control terminal RS 232 x 1 USB x 1 Speaker 2 watt x 1 Video compatibility NTSC NTSC 4 43 PAL PAL N PAL M SECAM HDTV 480p 576p 720p 1080i p Composite video Scanning frequency Horizontal frequency 31 80 KHz Vertical frequency 50 120 Hz Environment Operating Temperature 0 to 40 Humidity 30 85 Storage Temperature 20 to 60 Humidity 30 85 Power requirement AC 100 240 V 50 60 Hz 2 5A Power consumption 240 W Dimension WxDxH 279 5 x 218mm x 105mm 11 0 x 8 6 x 4 1 Weight 2 7 kg 66 Note Design and Specifications are subject to change without prior notice EN 27 Appendix LED Indicator Messages
37. th the Waste Electrical and Electronic Equipment Directive 2002 96 EC WEEE The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste but use the return and collection systems available chemical symbol Hg Cd or Pb then it means that the battery has a heavy metal content of If the batteries accumulators and button cells included with this equipment display the more than 0 0005 Mercury or more than 0 002 Cadmium or more than 0 004 Lead EN i Important Safety Instructions IS 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this unit near water Clean with a soft dry cloth Do not block any ventilation openings Install the unit in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade and the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from be
38. to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment For Canada This Class B digital apparatus complies with Canadian ICES 003 e Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada CE Conformity for European Countries C The device complies with the EMC Directive 2004 108 EC and Low Voltage Directive 2006 95 EC Following information is only for EU member states The mark is in compliance wi
39. tracted before placing the projector in its carrying avoid damaging the projector make sure that the elevator foot and tilt case Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1 Focus the image by rotating the focus ring A still image is recommended for focusing 2 Adjust the image by sliding the zoom ring EN 16 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance 5 08m 200 Wide 1 3m 51 2 Tele 1 6m 63 0 Wide 2 0m 78 7 Tele 2 4m 94 5 Wide 3 3m 130 0 Tele 4 0m 157 4 Wide 3 9m 153 5 Tele 4 8m 189 0 Wide 6 6m 259 8 Tele 8 0m 315 0 4 3 Screen Screen size Wide Tele Diagonal Projection distance Projection distance m inch m inch 1 02m 40 1 30 51 1 57 62 1 27m 50 1 60 63 2 00 79 1 52m 60 1 96 77 2 39 94 1 78 70 2 29 90 2 79 110 2 03 80 2 62 103 3 18 125 2 29m 90 3 00 118 3 58 141 2 54m 100 3 28 129 3 99 157 3 05m 120 3 91 154 4 80 189 3 81m 150 4 95 195 5 99 236 5 08m 200 6 60 260 8 00 315 6 35m 250 8 28 326 10 01 394 7 62m 300 9 93 391 Wi Position the projector in a horizontal position other positions can cause heat build up and damage to the projector Keep a space of 30 cm or more between the sides of th
40. year warranty for all parts excluding the lamp one 1 year for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Europe One 1 year warranty for all parts excluding the lamp one 1 year for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Other regions or countries Please check with your local dealer or local ViewSonic office for the warranty information Lamp warranty subject to terms and conditions verification and approval Applies to manufacturer s installed lamp only All accessory lamps purchased separately are warranted for 90 days Who the warranty protects This warranty is valid only for the first consumer purchaser What the warranty does not cover 1 Any product on which the serial number has been defaced modified or removed 2 Damage deterioration failure or malfunction resulting from a Accident abuse misuse neglect fire water lightning or other acts of nature improper maintenance unauthorized product modification or failure to follow instructions supplied with the product Operation outside of product specifications Operation of the product for other than the normal intended use or not under normal conditions Repair or attempted repair by anyone not authorized by ViewSonic Any damage of the product due to shipment Removal or installation of the product Causes external to the product such as electric pow
Download Pdf Manuals
Related Search