Verilux VD01 User's Manual
Contents
1. Original oeus FEM Natural Spectrume Desk Lamp IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Thank you for purchasing the Original Natural Spectrum Deluxe Desk Lamp Please read the following safety information before using To reduce the risk of fire electrical shock or injury to persons e Do NOT dismantle Do NOT alter power cord e Turn off unplug and allow to cool before replacing bulb or cleaning For indoor use only e The lamp is an electrical device DO NOT USE NEAR WATER GENERAL PRECAUTIONS e Before plugging in the lamp check to make sure the voltage corresponds with the main voltage of your location 120 volts e Do not use the lamp outside or in wet locations such as bathrooms It is intended for indoor dry use only Not for use with light dimmers timers motion detectors or extension cords e This product may cause interference with radios cordless telephones or devices that use a wireless remote control such as televisions If interference occurs move the product away from the device plug the product or device into a different outlet or move the lamp out of the line of sight of the remote control receiver e The light bulb may become loose during transit To reinstall the light bulb see the bulb installation instructions on page 6 e Do NOT use lubricating agent in assembly please see troubleshooting section if you are having difficulty assembling your lamp e Unplug from e2. that area has become inactive Bulb replacement is recommended Light flickers Has the plug come loose Insert plug securely into wall outlet Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process Is the lamp connected to a dimmer switch Connect lamp plug only to wall outlet without a dimmer switch
3. lectrical outlet for extended periods of non use or during lightning storms to ensure protection of the electronics 3 GETTING STARTED Main Parts amp Controls A Lamp Head E Polarized Plug B Gooseneck F Parabolic Grid Diffuser C Lamp Base G Bulb SET UP INSTRUCTIONS 1 Attaching the Parabolic Grid Diffuser e Remove grid diffuser from protective plastic bag e Insert plastic pegs at bottom of grid diffuser into openings near bulb socket e Snap tab into place 2 Plug lamp into outlet and turn on if bulb does not illuminate instantly please refer to the troubleshooting section of this manual BULB REPLACEMENT INSTRUCTIONS Removal 1 Unplug lamp from power source 2 To access to the bulb remove grid diffuser by depressing the tab and lifting it out See page 5 3 Firmly hold bulb base B and pull bulb C from the socket A in an outward motion Installation 1 Unplug lamp from power source 2 Firmly hold base B and push bulb C into the socket A 3 Be sure bulb is firmly seated in the socket see below and snapped into the metal bulb clip D 4 Replace grid diffuser No gap Correctly seated bulb Incorrectly seated bulb CARE amp CLEANING Your lamp is made from high quality materials that will last for many years with minimum care You may want to periodically clean the lamp using a mild non abrasive cleaner a
4. nd soft cloth When cleaning make sure you have turned off and unplugged the unit and allowed sufficient time for the unit to cool All liquid should be properly wiped away and dried prior to restoring power DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES OR AMMONIA BASED CLEANERS Note All moisture should be properly wiped away and dried prior to restoring power TROUBLESHOOTING Before Requesting Service on Your Verilux Lamp Please Read the Following e Make sure all power connectors cords and plugs are inserted fully and securely e Be sure the bulb is securely seated into the socket See page 8 e Make sure there is power to the wall outlet or try another outlet PROBLEM Light won t come on CHECK Has the plug come loose SOLUTION Insert plug securely into wall outlet Is the bulb old Check the bulb for blackening darkening at the ends an indicator of bulb life and replace bulb Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process Blackening darkening at ends of bulb Is the bulb new Sometimes when a new bulb is turned on for the first time the tube will darken but this will fade after a few minutes Is the bulb old With older bulbs darkening of the tube indicates end of bulb life This doesn t affect operation except to reduce the amount of light available since the phosphor in
Download Pdf Manuals
Related Search