Ubiquiti Networks RD-3G30 User's Manual
Contents
1. without notice 1 Install Feed to Dish Install Feed to Dish by M4 Bolt Springlock Washer Assembly Qty 6 The Dish Feed are keyed so that the feed can only be installed one way To install line up the alignment pin on the Dish with the hole on the Feed as shown in figure 1 2 Install Main Mounting Bracket and Elevation Rod Put M12X180 Bolt on the Main Mounting Bracket Install Main Mounting Bracket and Elevation Rod to Dish by M10X25 Carriage Bolt Qty 3 M16 Washer Qty 2 M10 Washer Qty 3 M16 Spring Lock Washer Qty 1 M10 Spring Lock Washer Qty 3 M16 Nut Qty 2 M10 Nut Qty 3 Pivot Points should be loose to allow mounting frame to move so that elevation rod can be installed 3 Install Rocket and Waterproof Cables Model MD 5G34 and MD 3G30 go to step 4 Install Rocket by lining up slots on Rocket Dish bracket Slide into place Install Waterproof Cables Qty 2 to Rocket Dish connectors Rubber boot to be placed over connectors for weatherproofing 4 Attach Stabilizer Bracket to Pole Select location for Dish antenna and attach the stabilizer bracket to mounting pole just below where Dish will be installed as shown in figure 4 Tighten to 14M m 10 Ib ft Install Stabilizer Bracket to pole by M10X100 Bolt Qty 2 M10 Washer Qty 2 M10 Spring Lock Washer Qty 2 M10 Nut Qty 2 5 Attach Antenna to Mounting Pole Mounting bracke2. UBIQUIT NETWORKS Installation Guide Dish Series Antenna AS O oO amp 8 o o g O O o 0 o h O o 0 o Q Contents Qty Q Parabolic Reflector Dish 1 M10X100 Bolt 2 M12 Washer 4 O Feed 1 M12X180 Carriage Bolt 4 Q M12 Spring Lock Washer 4 Main Mounting Bracket 1 M10X25 Carriage Bolt 3 M10 Nut 5 Pole Bracket 2 K M16 Nut 2 Q M10 Washer 5 E Stabilizer Bracket 2 L M16 Washer 2 O M10 Spring Lock Washer 5 Q Waterproof Cable 2 Q M16 Spring Lock Washer 1 Q M4 Bolt Springlock Washer Assembly 6 M16 Elevation Rod 1 M12 Nut 4 For model RD 5G34 and RD 3G30 only Products may be different from pictures and are subject to change without prior notice Welcome Support Thank you for purchasing this Ubiquiti Networks Backhaul Antenna Ubiquiti support engineers are located in the U S and in Europe and are These instructions are for the following model numbers dedicated to helping customers resolve software hardware compatibility or field issues as quickly as possible I RD 5G34 Il MD 5G34 Ill RD 3G30 Internet www ubnt com IV MD 3G30 Internet Support Forum www forum ubnt com Tools Required for Mounting o IMPORTANT NOTICE 1 Screw driver Phillips 1 Qty 1 2 16mm or 5 8 inch wrench Qty 1 3 18mm wrench Qty 1 4 24mm wrench Qty 1 The parabolic reflector should be handled with care Deformations in the shape will reduce the products effective n
3. ess General Warranty UBIQUITI NETWORKS Inc UBIQUITI NETWORKS represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one 1 year from the date of shipment by UBIQUITI NETWORKS under normal use and operation UBIQUITI NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace at its option any defective Product that fails during the warranty period The expense of removal and reinstallation of any item is not included in this warranty The foregoing warranty is exclusive and in lieu of all other warranties express or implied including the implied warranties of merchantability and fitness for a particular purpose and any warranties arising from a course of dealing usage or trade practice with respect to the products Repair or replacement in the manner provided herein shall be the sole and exclusive remedy of Buyer for breach of warranty and shall constitute fulfillment of all liabilities of UBIQUITI NETWORKS with respect to the quality and performance of the Products UBIQUITI NETWORKS reserves the right to inspect all defective Products which must be returned by Buyer to UBIQUITI NETWORKS factory freight prepaid No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization RMA number from UBIQUIT NETWORKS Products returned without an RMA number will not be processed and will be r
4. eturned to Buyer freight collect UBIQUITI NETWORKS shall have no obligation to make repairs or replacement necessitated by catastrophe fault negligence misuse abuse or accident by Buyer Buyer s customers or any other parties The warranty period of any repaired or replaced Product shall not extend beyond its original term Warranty Conditions The foregoing warranty shall apply only if I The Product has not been subjected to misuse neglect or unusual physical electrical or electromagnetic stress or some other type of accident Il No modification alteration or addition has been made to the Product by persons other than UBIQUITI NETWORKS or UBIQUIT NETWORKS s authorized representatives or otherwise approved by UBIQUITI NETWORKS ill The Product has been properly installed and used at all times in accordance and in all material respects with the applicable Product documentation Disclaimer UBIQUITI NETWORKS does not warrant that the operation of the products is error free or that operation will be uninterrupted In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance including coverage buyer s selection of products for buyer s application and or failure of products to meet government or regulatory requirements 2010 Ubiquiti Networks Inc All Rights Reserved Contents may vary depending on model version Features and specifications subject to change
5. t can accommodate 1 5 4 pole Mount the antenna slightly above the stabilizer bracket as shown in figure 5 using the following parts M12X180 Carriage Bolt Qty 4 M12 Washer Qty 4 M12 Spring Lock Washer Qty 4 M12 Nut Qty 4 6 Adjust Azimuth and Elevation After a visual alignment of both elevation and azimuth azimuth can be adjusted by rotating the antenna while supported by the stabilizer bracket Elevation is adjusted by tightening loosening the elevation rod When azimuth elevation are set tighten nuts to approximately 14N m 10 Ib ft or less should the mounting pole show deformation
Download Pdf Manuals
Related Search