TP-Link TF-3239D User's Manual
Contents
1. Increase the separation between the equipment and receiver Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EC DECLARATION OF CONFORMITY EUROPE In compliance with the EMC Directive 89 336 EEC the adapter meets the requirements of the following standards EN55022 EN55024 SAFETY NOTICES Caution Do not use this product near water for example in a wet basement or near a swimming pool Avoid using this product during an electrical storm There may be a remote risk of electric shock from lightning Thank you for purchasing TF 3239 series 10 100M Fast Ethernet Adapters This guide is to provide the installation and usage of the Products for network installers or users The Product complies with PCI 2 1 2 2 specification and supports half full duplex feature which can double network speed The Adapters support both 10Mbps and 100Mbps network speed 100Base TX operates on twisted pairs of Category 5 UTP and 10Base T operates on Category 3 4 5 UTP The Products use Auto Negotiation technology to detect the network speed Extensive driver supports for including commonly used network operation system Netware Win9x Win2000 Windows NT and TCP2. 0 TP LNK User s Guide TF 3239D TF 3239DL 10 100M Fast Ethernet Adapter COPYRIGHT amp TRADEMARKS Specifications are subject to change without notice TR LINK is a registered trademark of TP LINK Technologies Co Ltd Other brands and product names are trademarks or registered trademarks of their respective holders No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from TP LINK Technologies Co Ltd Copyright 2005 TP LINK Technologies Co Ltd All rights reserved FCC STATEMENT The adapter has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna
3. 0 Windows NT and TCP IP are available Whatever your requirements are ease of installation superior performance or responsive support backed up by unlimited technical support the Productis the superior choice Features amp Benefits Integrated Ethernet MAC Physical chip and transceiver in one chip Compliant to PCI Revision 2 1 2 2 PCI local bus single chip Ethernet controller Supports PCI clock 16 75MHz 40MHz Supports a 32 bit general purpose timer referenced by the external PCI clock source and timer interrupt Includes a programmable PCI burst size and early Tx Rx threshold Supports PCI target fast back to back transaction Supports digital and analog loopback capability on both ports
4. IPare available This manual is divided into two chapters and two appendices The following summarizes the contents of the chapters and appendices Chapter 1 Introduction Hardware Overview TF 3239 series Adapters are highly integrated and cost effective single chip Fast Ethernet Adapter that provides 32 bit performance PCI bus master capability and full compliance with IEEE 802 3u 100Base TX specifications and IEEE 802 3x Full Duplex Flow Control They also support ACPI PCI power management for modern operating systems that is capable of Operating System Directed Power Management OSPM to achieve the most efficient power management The Adapters keep network maintenance cost low and eliminate usage barriers It is the easiest way to upgrade a network from 10 to 100Mbps The product is highly integrated and requires no glue logic or external memory It includes an interface for a boot ROM and can be used in diskless workstations providing maximum network security and ease of management Exclude TF 3239DL They also support full duplex operation making possible 200Mbps of bandwidth at no additional cost The Adapters support both 10Mbps and 100Mbps network speed 100Base TX operate on twisted pairs of Category 5 UTP and 10Base T operate on Category 3 4 5 UTP The Adapters use Auto Negotiation technology to detect the network speed Extensive driver supports for including commonly used network operation system Netware Win9x Win200
5. Supports ACPI PCI power management Complies with the IEEE802 3u Fast Ethernet 100Base TX standard and IEEE802 3 CSMA CD 10Base T standard Supports Full Duplex Flow Control IEEE 802 3x Full duplex design to double the performance Supports Auto Negotiation function Auto setups IRQ and I O address Contains two large 2Kbyte independent receive and transmit FIFOs One STP UTP connector for 10Mbps or 100Mbps network Speed Provides diagnostic software and one LED to indicate network Link activity Supports smart remote boot ROM and provides the help for RPL PXE Exclude TF 3239DL Supports ODI Driver for NetWare 3 x 4 x NDIS Driver for LAN Manager Windows 95 Windows NT Windows 2000 Packet driver forTCP IP Chapter 2 Installation Card Installation To insert The Product into your computer follow the steps list below 1 Turn off the computer and remove its cover 2 Insert The Product into a PCI slot 3 Secure the Product to the rear of the computer chassis and put back the computer cover 4 Connectthe Product to the network using twisted pair cables Driver Installation Use the drivers supplied by the diskette included in The Product For detail description please refer to help in the diskette provided by the Product Appendix A Troubleshooting If you experience any problems with the adapter first make sure the appropriate driver is loaded the proper cable is connected to the adapter port and the hub compli
6. es with the adapter specification such as 10Mbps 10Base T or 100Mbps 100Base TX Then recheck the LED The Product provided one LEDs to indicate network status LINK ACTIVE LED A red LED indicates if the 10 or 100Mbps STP UTP has been link OK or not and is working or not When the light is OFF it indicates that the STP UTP port has not been connected or link not OK When the light is ON it indicates that the STP UTP port link OK When the light is BLINKING it indicates that the STP UTP port is receiving data or transmitting data Appendix B Technical Specification Topology Star Connector Supported RJ45 Standard IEEE802 3 10Base T IEEE802 3u100Base TX Transmission Rate 100Mbps or 200Mbps Hardware IBM PC compatibles It must have PCI slot IRQ Line Assigned by system I O Address Assigned by system Software ODI driver for NetWare 3 x 4 x NDIS driver for Microsoft LAN manager and Windows 98 Windows ME Windows NT Windows 2000 Packet driver for TCP IP Temperature 0 C to 40 C Operating Humidity 5 to 95 Non condensing Power consumption 1W Max Appendix C Contact Information For help with the installation or operation of the TP LINK TF 3239D TF 3239DL Adapter please contact us TP LINK TECHNOLOGIES CO LTD Add FI 3 Bldg R1 B High Tech Industrial Park Shennan Road Shenzhen China E mail support tp link com Website http www tp link com Made in China 71030429 Ver 2
Download Pdf Manuals
Related Search