Teledex B100 User's Manual
Contents
1. 3 Plug one end of the supplied line cord into the LINE jack on the bottom of your phone Then route the line cord through the left slot of the desk wall mount bracket 4 Plug the other end of the modular cord into the wall jack HANDSET JACK Y WALL MOUNTING 1 Plug one end of the handset coiled cord into the handset Plug the other end of the cord into the handset jack located on the left side of the phone base please refer to figure 3 2 Place the handset in the handset cradle 3 Remove the desk wall mount bracket from the bottom of the B100 Rotate the bracket 180 and re install it into the four slots on the bottom of the B100 4 Connect the short line cord into the LINE jack on the bottom of your phone Connect the other end of the line cord to the line jack on the wall mount plate 5 Slip the phone onto the wall plate jack lining up the wall mounting holes and then slide the telephone down so it is firmly in place2. 1 FEATURES The Teledex B100 is a single line telephone with a compact footprint and basic functionality that is ideal for non critical areas that do not require multiple lines or displays Your B100 has these useful features 1 1 FLASH Sends an electronic hook switch signal for use with special phone services such as call waiting 1 2 LAST NUMBER REDIAL Lets you quickly dial the last number dialed 1 3 MUTE Mutes the handset microphone 1 4 HANDSET VOLUME CONTROL Lets you control the volume of the sound you hear through the handset 1 5 DATA PORT For connecting an additional phone laptop desktop computer or fax answering machine to the B100 on the same line 1 6 HEARING AID COMPATIBLE The B100 is ETL listed to UL standards and meets all applicable FCC standards and requirements 12 UNPACKING YOUR B100 Inside the box you will find all of the items needed for installation as shown below pa B 100 HANDSET COIL CORD DESK WALL TELEPHONE LINE SHORT CORD MOUNT BRACKET CORD Check to be sure that your package includes all the above items If any items are missing or damaged please contact the distributor where you purchased the phone 13 INSTALLATION 3 1 DESKTOP INSTALLATION 3 2 1 Plug one end of the handset coiled cord into the handset Plug the other end of the cord into the handset jack located on the left side of the phone base Refer to figure 3 2 Place the handset in the handset cradle
Download Pdf Manuals
Related Search