Tech Lighting 700KESUN User's Manual
Contents
1.2. Risk of fire Use only the type of lamp and maximum wattage indicated in this instruction manual Never cover the halogen lamp with anything other than a Tech Lighting lamp shield and never place flammable material close to your fixture Never turn the fixture on and off by connecting and disconnecting the halogen lamp Do not touch the fixture shades or lamp shield while the fixture is on These surfaces may be HOT Halogen Lamp General Information A new halogen lamp may smoke slightly when it is used for the first time This is perfectly normal the protective coating is simply being vaporized Two Tips For Prolonging Halogen Lamp Life First avoid touching the lamp with bare hands during installation Any contaminant even the oil from your hands can deteriorate the lamp Rubbing alcohol can be used to remove any contaminant Second do not run the lamps at full power when you do not need to However if dimming the fixture for an extended period of time occasionally bring the light up to full brightness for a few minutes to complete the halogen cycle TECH LIGHTING 7400 Linder Ave Skokie IL 60077 847 410 4400 www techlighting com 2008 Tech Lighting L L C All rights reserved The Tech Lighting graphic is a registered trademark of Tech Lighting L L C Tech Lighting reserves the right to change specifications for product improvements without notification A Generation Brands Company
3. Installation Instructions for 920KLSUNF Kable Lite Sun TECH LIGHTING FUNCTIONAL ART 700KESUN_ GENERAL PRODUCT INFORMATION tre K This product is suitable for indoor dry locations only Installing the Lamp BI PIN LAMP ED Remove all four 8 32 screws on Sun fixture so that it CAUTION To reduce the risk of a burn or electric splits into two parts shock during relamping disconnect the power to the fixture NOTE Use only your fingers and a soft cloth to 1B replace the lamp Use MAX 20 Watt Bi Pin Halogen Lamp 20 gt BI PIN LAMP E Gently insert the new lamp pins into the socket holes E Put the two Sun sections back together E Align the screw holes replace and tighten the four 8 32 screws ED Remove the old lamp Installing the Sun Fixture FOR HORIZONTAL KABLE LITE CABLES FOR VERTICAL KABLE LITE CABLES NOTE The Kable Lite cable separation must be between 7 5 to 8 EB Sun can be connected to horizontal or vertical Kable Lite cables by rotating the arms 90 E Loosen the thumb screws ED Place one arm slot on each Kable Lite cable and tighten the thumb screws SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire electrical shock exposure to excessive UV radiation or injury to person Use this fixture indoors only Do not look directly at the lighted lamp Do not remain in light if skin feels warm
Download Pdf Manuals
Related Search