Home

Speco Technologies D16RS User's Manual

Contents

1. tit 4 IEA 30 4 5 Setup DISPLAY Mode In the SETUP menu select the DISPLAY tab Then the DISPLAY menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item To return to the previous setup menu screen press the ESC button LE 7 SS B 4 T e Figure 4 5 1 DISPLAY Setup Screen Table 4 5 1 Menu Items in DISPLAY Setup Screen Item Description OSD Enable disable on screen display OSD CONTRAST Setthe visibility level of the On Screen Display OSD 0 100 SEQUENCE Enable disable sequential display of video in full screen mode SEQUENCE Set the dwell time of each DWELL TIME single channel display in sequential display mode 3 60seconds SITE Select a channel to apply the name and covert settings change using the mouse or control button on the remote control Select a channel to apply the following settings using the mouse NAME oet the channel name Press the right square button and set the channel name and select OK using the mouse The name can be made up to 36 characters COVERT Enable disable display of the specified video channel in live display 31 VIDEO OUTPUT DARS DAWRS VGA When VGA REOSLUTION is set at 1024 x 768 e CVBS OUTPUT Simultaneous Video Output ON e SPOT OUTPUT OFF When VGA RESOLUTION is set as 1280 x1024 e CVBS OUTPUT Simult
2. RC ALL Remote control ID display If a remote ID is not set the message ALL is displayed 15 Displays the amount of recording on the hard disk from 0 99 Indicates that HDD is recycled Continuous recording in progress Manual recording in progress To set the Manual recording mode press the Record button on the front panel Motion alarm recording in progress Sensor recording in progress Only for D8RS and D16RS model essem Right click the mouse and the quick operation window will be displayed as below SETUP AUDIO SEARCH SNAPSHOT CAMERA PTZ SEQUENCE ON MANUAL RECORD ALARM OUT SITE INFORMATION SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN Figure 5 1 2 Quick Operation Window 44 Table 5 1 2 Menu Items in Quick Operation Window Icon Description SETUP Setup button Click this button to go to a setup menu AUDIO Audio button Click this button to set an audio reception type Channel 1 through 4 Audio Mute SEARCH Search button Click this button to enter the search menu SNAPSHOT Snapshot button Click this button to create a snapshot JPEG STILL IMAGE CAMERA PTZ Pop up the PTZ user interface DARS does not support CAMERA PTZ SEQUENCE oequence button Click this button to use a sequence function MANUAL Manual Record button Click this button to enable manual recording RECORD ALARM OUT Click this button to enable disab
3. speco technologies User Guide ver 2 4 Model D4RS D8RS D16RS DAWRS D8WRS D16WRS 4 8 16 Channel Digital Video Recorder About This User s Guide Before operating the unit please read this user s guide thoroughly and retain it for future reference Cautions CAUTION N AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance servicing instructions in the literature accompanying the product This symbol indicates the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock property damage personal injury or death WARNING To reduce a risk of fire or electric shock do not expose this product to rain or moisture CAUTION Changes or modifications not approved by the manufacture will void the warranty of the product Using an incompatible battery may increase the risk of fire or explosion Replace only with the same or equivalent type battery recommended by the manufacture Discard used batteries according to manufacturer s instructions These Precautions must be Followed for Safety Reasons Warning e Do not use if the unit emits smoke e Do not disassemble the unit e Do not plac
4. 4 3 Setup RECORD Mode In the SETUP menu select the RECORD tab Then the RECORD menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item 3 e PER om SEL Figure 4 3 1 RECORD Setup Screen Table 4 3 1 Menu Items in RECORD Setup Screen Menu Item Description SITE Select a channel for applying the following settings using the mouse or the control button on the remote control To change the values of all channels take the following steps Select the following to change the values of all channels 23 D1 CIF FRAME RATE _ 20 30 QUALITY LEVEL4 LEVELA LEVEL 5 H LEVEL4 LEVEL 5 H RECORDING MOTION MOTION CONTINUOUS MOTION SCHEDULE PRE RECORD 15 SECON 15 SECON 15 SECON 15 SECON 15 SECON POST EVENT REC 19 SECON 19 SECON 19 SECON 19 SECON 19 SECON AUDIO OFF OFF OFF OFF OFF OK CANCEL RESOLUTION Select D1 Half D1 or CIF using the mouse or the control button on the remote control FRAME RATE Set the frame rate for the specified channel The sum of the frame rate values from each channel cannot exceed the maximum frame rates for a specific recording resolution QUALITY Select the recording quality for the selected channel Options are Level 1 Low Level 2 Level 3 Level 4 and Level 5 High RECORDING Assign the rec
5. Still image Capture During Live Capture 1 Double click a channel to capture from the display screen Otherwise all channels will be captured save Path CistoragelCapturelDARS File name 2011 07 19 112621 File Format BITMAP BMP 3 Set Save Path File Name and File Format And then click OK button 4 Still image is saved as set in Capture window dos h A w Storage Capture D4RS v 4 Search DARS SO I Organize v Include in library v Documents 2 Music i Pictures B Videos 22 Homegroup a VM Computer E Local Disk C DVD RW Drive D BackupDisc cx DATA HDD E A 2 items Share with Slide show Burn New folder 2011 07 19 112606 2011 07 19 112922 76 7 8 4 Recording Video on Local PC During Live 1 Click EN SETUP button And then a setup window will be displayed as below 2 Select Record and set the values General Event Event search ake E Disk E Display About Record Condition Q Always Event F Auto record Event Motion Alarm Duration Channel CH Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 3 Select Disk and set the values General Event Event search A Record a E Display Disk Space Cc4 Disk Info Total space 465 GB About Free space 398 GB Disk full Replace oldest files Stop recording 4 Click RECORD ON b
6. s s Event Search Event log can be searched from the selected time e First 2011 04 26 jr 12 00 00 AM Mor irst 2011 04 21 12 00 00 Ah ou E o Last 2011 04 26 je 7 48 54 PM i A Record m Disk atn CistorageiLog E Display 4 About Type Address Event Date Time 63 7 6 3 Record Record Setup You can set the recording conditions as the following Always Event or Auto record And you can also select target DVR DVRs and channel channels When you set the recording condition to event you can set event for motion or alarm with duration General Record Condition Event Event search d Event ld Disk Motion Alarm Duration Eh Display About Channel Site All site E All Always Event E Auto record CH Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Record Local Storage Setup You can select the local disk to record and the amount of disk space you want to allow the program to use for recording You can also select the option to overwrite data or stop recording when the maximum amount of disk space is full General an Disk Space C4 E Event search A Record Disk Info x Total space 465 GB E Display 9 About Free space 398 GB Disk full Replace oldest files Stop recording 64 7 6 4 Display You can select the OSD On Screen Display to be displayed General OSD Event E Event search Site 1 E All site A Record Info Event lg Disk
7. 11 24 09 89 APPENDIX Network Connection Internet and DDNS Dynamic Domain Name System DDNS allows a domain name to be constantly synchronized with a dynamic IP address A current dynamic IP address is being associated with a static domain name 600000000 om on or on om ses Om 00000000 aut alei AULA sasa IP Router or HUB 1 Goto SETUP gt NETWORK gt DDNS and set the DDNS SERVER to ON ENABLE DDNS HOST NAME SUBMIT UPDATE ezDDNS APPLY CLOSE If you set ezDDNS to ON the host name is automatically generated and registered 2 Goto SETUP gt NETWORK gt DDNS gt HOST NAME Manually enter a domain name using the virtual keyboard and click ENTER button ENTER SHIFT CLOSE 90 When a manual host name is completed Go to SETUP gt NETWORK gt DDNS gt SUBMIT UPDATE and select ON to submit the settings on the SPECO DDNS Once the setting is completed the DDNS address will be http hostname ddns specoddns net For example if you enter the host name as D4RS then the address will be PX BT epe E al EE Jl N ps nag o d a TIC gt UU WS he E UUTIS C When DDNS setting is done click the APPLY button Otherwise DDNS setting will not be applied When you exit SETUP menu DDNS NOTIFIY window will pop up DDNS NOTIFY STATUS SUCCESS STATUS FAIL DDNS registration status can be checked from SYSTEM INFORMATION or SETUP gt SYSTE
8. D8RS speco 201 e D16RS main D16RS speco 201 e DAWRS main DAWHRS speco 201 e D8WRS main D8WHS speco 201 e D16WHRS main D16WRS speco 201 ea E a E upgrade Organize Share with Burn New folder das a ES sk A Name Date modified BE Desktop dis 7 29 2011 9 07 AM File folder Jg Downloads d wrs 7 29 2011 9 08 AM File folder El Recent Places d amp rs 7 29 2011 9 08 AM File folder d wrs 7 29 2011 9 08 AM File folder Libraries dlrs 7 29 2011 9 08 AM File folder E Documents di6wrs 7 28 2011 9 08 AM File folder d Music Lk 6 items Plug in the USB flash drive on the rear panel Navigate to CONFIG menu of SETUP Select SOFTWARE UPGRADE Follow the procedure from Figure 4 9 2 to Figure 4 9 4 p SM A CURRENT SOFTWARE Yer 3 2 1 07 13 2011 SCAN CANCEL Figure 4 9 2 41 CURRENT SOFTWARE Ver 3 2 1 07 11 2011 USB CHECK Found USB MOUNT Ok FILE CHECK main bin Figure 4 9 3 CURRENT SOFTWARE Ver 3 2 1 07 11 2011 USB CHECK Found USB MOUNT Ok FILE CHECK main bin 100 Upgrade Success IREBOOT NOW IR BOOT LATER Figure 4 9 4 NOTICE 1 If selecting REBOOT LATER the upgraded software will not be applied until the system reboots 2 If selecting REBOOT NOW when the USB flash drive is plugged the following message will pop up Remove the USB flash drive and select OK Please unplug USB memory 42 5
9. DWELL TIME 5 SECOND S SITE CH1 c o 4 4 NAME COVERT F BRIGHTNESS CONTRAST HUE SATURATION o sisig HE alala 4 4 RELOAD APPLY These settings apply to all channels 1 OSD Sets whether to display or not date and time as well as channel number on the screen OSD Contrast Adjust the character contrast on the screen Sequence Setting for automatically switching the displayed video Sequence Dwell Time Sets the interval for automatically switching the screens SITE Name Covert Brightness Contrast Hue Saturation These settings apply to the specified channel only B A 70 7 7 5 Network Remote setup ol SPECO WEB SETUP sn SYSTEM RECORD DEVICE DISPLAY STORAGE UPGRADE NETWORK TYPE IP 255 255 255 168 126 63 1 SUBNET MASK GATEWAY DNS PRIMARY DNS SECONDARY DDNS HOST NAME SUBMIT UPDATE ezDONS NETWORK PORT WEB PORT NETWORK STREAM RESOLUTION FRAME RATE QUALITY RELOAD APPLY Network Type STATIC The address setting mode is manual Input IP Gateway Subnet Mask and DNS server IP DHCP The address setting mode is automatic Addresses and other information do not need to be set DDNS Set whether to use DDNS service or not Host Name Allows the user to setup a domain name manually SUMBIT UPDATE Select ON to submit the settings ezDDNS Enable disable ezDDNS to register the host name automatically Network Port When connecting multiple DVRs t
10. and click this icon to modify the information of specific site DARS IP 192 168 1 151 60 ME nu Click this icon to connect the selected site sites ESSE Connect Click this icon to disconnect the selected site sites In Click this icon to setup configuration of SpecoTech Multi Client EN SETUP Lg CAPTURE Click this icon to capture a still image Opens list of events logged by the UMS Multi Client ENT LIST EV Click this icon to set the beginning time for backup of the recorded SE ak OUT in AVI format Click this icon to backup the recorded video in AVI format ii 3 To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site To select the channel to playback The calendar shows dates with recorded video in color 10 11 12 13 14 15 16 47 18 19 20 21 22 23 24 28 29 30 To change a timeline scale from 24 hours to 60 minutes The timeline shows recorded data in color on the bar You can adjust the timeline scale and move it to the time you wish to playback Then click the play icon to display the recorded video Digital Zoom Window in Live and Playback Only available in Single Channel Viewing 61 7 6 Setup of SpecoTech Multi Client Click the setup icon a to setup the configuration of UMS Multi Client sofiware The SETUP window
11. disk which has set in RECORD ON setup menu Use the volume control bar to set the audio level AUDIO m me se the microphone volume control bar to set the micro phone level CS Oe On sos User can control PRESET TOUR SCAN MENU PRESET TOUR SCAN MENU TN E ES Ee To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen 99 7 5 Search and Playback Window 7 5 1 Main User Interface You can access to search window by clicking the search icon Local Playback Remote Playback on the upper right of the Live Window speco technologies DIRS IP 192 168 1 151 RemotePB SPECO Multi Client Ver 3 0 4 4 2011 07 19 00 00 00 E gt 60 ET TRETEN SI Na 1 2 iS d wu Qe Us QP GP e uu 5 6 7 8 9 4 2011 on 42 13 14 15 16 LEER 24 25 26 27 28 29 20 U 7 5 2 Main Control Panel LEUTE Click this icon to run a playback window to search and play videos that Click this icon to run a playback window to search and play videos that B THUMBNAIL REFRESH Click this icon to refresh and renew thumbnail image of the connected sites E SITE ADDITION Click this icon to open Site Addition window E SITE DELETE Click this icon to delete site from the index window after disconnect a site Ej NET FINDER Select the site from the index window
12. is displayed as below 7 6 1 General Security Option Set a password for security options Select security options and set a password Then when you access any of selected functions you need to enter the password You can also set the save path for capturing and backup Save Path Specify the location to save captured still image for Capture and Backup data Miscellaneous Automatic Reconnection If enabled the software will automatically try to reconnect to the last successful IP address Always On Top If enabled the software display will be continuously on the top of other windows Time Format Change the way the Client software displays the time General Security Option Event Startu shutdown Satu Event search a j m L E Password ff Record IF Local Playback X Remote Playback E Disk M Display Save Path Y About Capture CA storage Capture Backup C Storage Backup Miscellaneous Automatic reconnection 7 Always On Top Time Format MM DD 62 7 6 2 Event Event log can be archived and searched Event Log Specify the location to save event logs and select event to archive General ath CistorageiLog E Event search vh Record Size 10 MAX 100MB E Disk Wh Display 2 About Event list Event Startup 3 Shutdown ig Setup Change Sensor in tE Alarm out 2 Motion Si Camera loss aa Network loss ad Record Fe s s s 9 9 Be S Fe s s s s m s
13. mode press the BACKUP button to launch the archive function or select BACK UP menu on the screen using the mouse 1 Select a specific channel which wants to backup on live screen 2 When you press BACKUP button the archiving screen will display 3 Once you press Backup button the system will capture a still image Please select archive media type 2 STILL IMAGE NSF AVI Figure 6 1 1 Still Image Archiving and Backup Screen NOTICE USB Flash Drive must be in FAT32 file format 6 2 Video Backup onto USB Flash Drive Video can be captured and archived onto the USB flash drive or a hard drive while playing back the recorded video In playback mode press the BACKUP button to launch the backup function 1 When you press BACKUP button on the selected channel or all channels the DVR will ask whether to archive a Still Image a NSF or AVI Please select archive media type 2 STILL IMAGE NSF AV NEXT CLOSE 2 Select the proper media type 92 Please select the media type 3 Select USB STICK Flash Drive to back up less than an hour Select USB HDD Huge Backup to back up from 1 hour to 24 hours Please select the media type USB HDD HUGE BACKUP 4 Once you select the channel and duration the system will start to archive the data to the USB flash drive Channel ALL bur roiv rcH6 rcH7 rcHa CH9 C CH10 C CH 11 C CH 12 C CH 13 C CH 14 CH 15 CH 16
14. move menu items or select a channel SETUP To open the SETUP menu SEARCH To go to SEARCH menu ESC e During setup To retun to the preivous menu screen e During Playback To exit playback mode e System lock To lock a system when pressing ESC button for 5 seconds e System unlock To unlock a system when pressing ESC button for 5 seconds BACKUP To start a backup operations in live or playback mode SEQ To start auto sequencing the screen in full screen mode Toggle 18 4 Setting up the DVR The following sections detail the initial setup of the DVR Menu screen will close if user input is not received in 5 minutes 4 1 Setup Main Live Screen To enter the setup menu right click on the mouse and select setup from the submenu or press the setup button on the remote control VIDEOLOSS SETUP AUDIO SEARCH SNAPSHOT CAMERA PTZ SEQUENCE ON MANUAL RECORD ALARM OUT VIDEOLOSS SITE INFORMATION VIDEOLOSS SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN wm mJ O 07 47 2011 12 34 56 RC ALL Table 4 1 1 Live Screen and Quick Operation Window ADMIN PASSWORD LOGIN SETUP USER ADMIN Ed PASSWORD ET CZ OK CANCEL When the DVR prompts the LOG IN window enter the PASSWORD using the virtual keyboard or the front panel or the remote control The factory default password is 1111 It is highly recommended to assign a new password to protect the system User can assign a new password in SECURITY setup men
15. ras at te ia ia tt at E EL CR E ue US REEE 34 4 7 Setup USER MANAGEMENT Mode eee eee nana 35 4 0 SUI STORAGE OCE scm cotit 6 a iale lila al ta ut tal i osicus 37 4 9 Setup CONFIG MOJE cis 39 4 9 T Firmware DUO inen a d AO secu S ac d le cui 41 o Lives Se arcano Playback oe eti eet dope ertt oec te ip e ra e al at Br al i te E 43 o EVE VE W see anna vaii atu i Dido manga oi bed does c ee na 43 PA es sian ain ae no ai alaltaieri O 46 5 2 Digital Zoom in Live and Playback Screen nennen nennen 47 o REOR au atac A A O 47 le Mer Ie Si o a li nui a un e ae areal eatin 48 5 9 2 EVEN OCA C ETT UT 49 5 9 9 00 TO ESTIMA AA ae aes aE ese AAA 49 TOE COO EE Burt tese cert LI LL LI ata le alma ate acele datat na atata 49 Sos 00 10 SDECIlIC DIE 5 TNT UT Tm 49 o E M 50 Fs LOG LIS hast cat e En cari ls aa De ai adi la tees rai i tite atat 50 A e a Mads aste ala au Ele Bia ad ani ab tai 51 Or iz 15 0 B o aa COMPETE o O HIP sem EN 52 6 1 Still Image Backup onto USB Flash Drive eee 52 6 2 Video Backup onto USB Flash Drive eee eee nana ana 52 6 3 Transferring Still Images or Video from the ARCHIVE List eee eee 54 6 4 Playback Of BACKUD VISO ss stea cete Ere o eno ses ona Selena so rabo Bi ta ei e la ec ia it i a dable 55 7 Network Access Using the Multi Sites Network Viewer eee 56 Te WE OVER E RR T T O lada aa lat al at dit 56 7 2 PO IACOUIGMOIS sse sies suus tage ata at ae at t ds aaa Re aiu nee ia E da a t
16. 2011 20 56 02 6 log s found I lt PREV DISPLAY CLOSE 54 DA af Figure 6 3 1 Archive Search Screen 6 4 Playback of Backup Video e AVI format AVI format video can be played back by Window Media Player or other media player that is compatible with AVI format video e NSF format NSF format video can be played back using the player that the DVR copies on USB flash drive with video e Digital Zoom Feature Use the mouse scroll to use digital zoom in and out feature HD Player 00 f2 07 04 00 bb 2011 04 27 01 42 44 DLS Qa Gu y m X1 5 55 T Network Access Using the Multi Sites Network Viewer 7 1 Overview The SpecoTech Multi Client is a multiple site monitoring client software with video audio and alarm signals from the DVRs over networks The SpecoTech Multi Client does not limit the number of DVR units to register The program displays up to 16 DVRs and supports dual monitors On the program user may control PTZ cameras on the DVRs By attaching a microphone and speaker system to devices on site the user may make bi directional audio communication over the network 7 2 PC Requirements Minimum PC Requirements CPU Intel Core i3 Resolution 1280x720 OS Windows 2000 XP Professional XP Home Vista 7 NOTE Not all versions of Vista and 7 are supported Direct X 9 0c or Higher Recommended PC Requirements C Intel Core i5 2Ghz or higher V PU AGB DDR3 or hig
17. 6 21 12 27 Web Client Ver 1 4 8 7 FPS 0 Bit rate 0 Kbps Event Date Time Initialize success 2011 04 26 21 10 45 je al O al 6 Click the CONNECT button on the Left upper corner of web viewer Then Connect dialog is displayed 82 http 192 168 1 12 login html Connect to remote system Address 192 168 1 12 5445 admin e Site Name Input a name that properly describes a site e IP Address Input IP address Public IP address of a router that DVR is connected or Domain name e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Password is 1111 Then the cameras connected to the DVR are displayed on the screen Use mouse scroll to digitally zoom in and out from a single channel display w Rm Disconnect eu Live e Search 2011 04 27 19 52 42 192 168 1 12 Event Date Time 192 168 1 12 5445 Camera detected CH 1 2011 04 27 08 54 34 192 168 1 12 5445 camera detected ch 2 2011 04 27 08 54 34 192 168 1 12 5445 camera detected ch 3 2011 04 27 08 54 33 192 168 1 12 5445 camera detected ch 4 2011 04 27 08 54 33 192 168 1 12 5445 link connected 2011 04 27 08 54 33 Q RE AA amera deterted h A N4 ID hA 83 9 Network Access Using the Smart Phone Viewer 9 1 App Viewer for iPhone 1 Enter the Apple App Store 2 Search Speco Viewer in the App Store Speco View
18. 68 1280x1024 Output ci 1 BNC 1 BNC 1 BNC Input 8 imput Output 4 CH Line input amp 1 CH Line output ENTE Audio Codec G 711 Sensor Alarm Out 1 Alarm Out by Sensor Motion and Video Loss Compesin H 264 QUADPLEX Playback Record Network Backup 120fps 120fps 120fps NTSC o D1 120fps 240fps 240fps 120fps 240fps 480fps Resolution 100fps 100fps 100fps Record Recording A channel s S LM Playback x2 4 8 16 32 64 Playback Search Mode Timeline Event Archive Log Interface Type Serial ATA D4RS D4WRS Max 1 TB Capacity of 1 HDD Storage D8RS D8WRS D16RS D16WRS Max 2 TB 5 Video amp Still Image Backup A Video amp Still Image n Huge Backup Yes to 24 hours User I F RS 485 PTZ contre pe 1 RS 485 1 RS 485 DynamicDNS DNS Yes Free DDNS 10 100 base TX Network Interface 10 100 1000 base TX Ethernet RJ 45 Network Ethernet RJ 45 Dual Encoding for Network l CIF 60fps 50fps CIF 120fps 100fps Streaming Web Viewer 1 1 Live Search Backup Remote Setup PTZ control Network Mobile View Software 1 1 Live Search PTZ control Access Multi sites Monitoring System b Live Search Backup Remote Setup PTZ control N Internal Beep By Video Loss HDD Error S M A R T Features S W ee USB Flash drive Remote S W Upgrade Mobile Phone Viewer Yes Power E Power Supply Voltage DC 12V 3A DC 12V 5A Source Allowable operati
19. 7 Display network statistics Alarm Date Time Motion bou Sensor Record Video Loss Display Secondary monitor image correction Please use this option only on the PC when having a shattered image on the secondary monitor during use of multi monitor If option is enabled the performance ofthe program may drap 7 6 5 About About provides network client version information General Event SPECO Multi Client Version 3 0 4 4 Build 110524 ES Event search ES l a Record Copyright C 2011 mea This product licensed to isplay T Warning this computer program is protected by copyright law and international treaties Unauthorized reproduction or distribution af this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted to the maximum extent possible under the law 65 7 7 Remote Setup The menu settings for the DVR unit can be set over network Put the cursor of the mouse on the channel which is connected to the site and right click on the mouse to open the submenu Then the following window is displayed as below Select the REMOTE SETUP speco technologies 3 CH 2 m NO VIDEO er Al J p i Disconnect Full Screen Setup Remote Setup CH 3 IFrame only NO VIDEO Lock Site Information Exit 2011 07 19 11 16 13 Then the setup window is displayed The specified menu screen is displayed on the upper left of the screen E
20. AM Set the value for network streaming 4 6 1 Network Types 4 6 1 1 DHCP An IP address is automatically assigned by the DHCP server which automatically assigns the IP address and other parameters to new devices 4 6 1 2 STATIC IP address Subnet Mask Gateway and DNS are manually assigned by the user IP ADDRESS The fixed IP address of the DVR unit SUBNET MASK The subnet mask for the LAN GATEWAY The IP address of the Gateway DNS PRIMARY The primary address of Domain Name Server DNS SECINDARY The secondary address of Domain Name Server NOTE Unless DNS is properly set the DDNS and the e mail features will not work 4 6 2 DDNS DDNS Dynamic Domain Name System allows a DNS name to be constantly synchronized with a dynamic IP address It allows using a dynamic IP address to be associated with a static domain name Once the setting is completed the DDNS address will be htto hostname ddns specoddns net 33 For example if you enter the host name as D4RS then the address will be http d4rs ddns specoddns net Select NETWORK gt DDNS The menu displays as below ENABLE DDNS HOST NAME SUBMIT UPDATE ezDDNS APPLY CLOSE Figure 4 6 3 NETWORK Setup Screen DDNS Table 4 6 2 DDNS Item Description ENABLE DDNS Enable disable the Dynamic Domain Name Service HOST NAME This item allows the user to setup a domain name manually using virtual keyboard displays as shown H
21. Duration NUM 07 12 2011 15 39 19 07 12 2011 15 40 19 5 The following image pops up in case of starting backup on one channel screen Duration 07 12 2011 15 26 36 07 12 2011 15 27 36 6 The following image shows the progress of archiving the data CHANNEL 1 7 The following shows the image to complete the backup Select lose to return to the previous screen Complete 6 3 Transferring Still Images or Video from the ARCHIVE List The stored data in the hard drive can be found in the ARCHIVE list in the SEARCH window User can back up still images or video into the storage device from the ARCHIVE list 1 p A SML JS Select the date to begin searching and navigate through the days using the mouse or the control button or the remote control Once you have selected the date press the NEXT button to open the list of stored data Use the mouse or the control button on the remote control to scroll through the archive list Select a list of stored events in the archive list Once the desired event has been selected press the DISPLAY button to view the still image or the first frame of the selected video Press the BACKUP button to launch the archiving function in playback mode Press the CLOSE button to return to the SEARCH window CH6 PLAY JPEG CH6 NFS 1 min 07 13 2011 20 44 20 rfv AVI 1 min 07 13 2011 20 45 37 CH6 AVI 1 min 07 13 2011 20 45 46 rfv AVI 1 min 07 13 2011 20 55 52 CH6 AVI 1 min 07 13
22. Live Search and Playback 5 1 Live View In the Live screen video inputs from the cameras are displayed as they are configured in the Display Setup screen Various On Screen Display OSD symbols which indicate the status of the DVR are described in Table 5 1 1 VAR To EP AA Elo T Lat Ne Li l pr A 9m aa E iy Wit y pn P VIDEO LOSS Y ID AUDIO SEARCH SNAPSHOT CAMERA PTZ SEQUENCE ON MANUAL RECORD x ALARM OUT CETI IDE J VIDEOLOSS SITE INFORMATION VIDEOLOSS SYSTEM INFORMATION LOCK E M SYSTEM SHUTDOWN wma DO 07 47 2011 12 34 56 RC ALL Figure 5 1 1 Live Screen and Quick Operation Window Table 5 1 1 Status Indicator Icons in Live Viewing Screen Icon Description Indicates the DVR is locked Note to unlock right click on the live view screen and click on Unlock Audio mute To select audio output press the Audio after click the right button on the mouse Toggle from Audio 1 to 4 mute in order Indicates that alarm is set To set the alarm function press the Alarm button on the front panel Indicates that alarm output is activated oco AS Event indicator When there is an event motion recording video loss HDD fail S M A R T this icon will be highlighted 43 Indicates that a network client is connected to the DVR Indicates that sequencing mode is enabled 2009 04 14 17 23 40 Displays the current date and time
23. M gt DESCRIPTION gt DDNS STATUS SOFTWARE VERSION STORAGE SIZE IP ADDRESS MAC ADDRESS Ver 3 2 1 07 11 2011 217 GB 00 02 69 00 00 01 DDNS STATUS READY Lo Check the network PORT Default 5445 WEB PORT Default 80 and the IP Address of the DVR from SETUP gt NETWORK Ex NETWORK TYPE P SUBNET MASK GATEWAY DNS PRIMARY DNS SECONDARY DDNS NETWORK PORT WEB PORT NE WOR K S c TR RE AM 91 8 Port forward the network PORT Default 5445 and WEB PORT Default 80 of the private IP Address of the DVR on the network router Please refer to the user manual and guide for the detailed steps for port forwarding for specific router model 6 Run the network client software 0 ER speco technologies ES e D4RS IP d rs ddns specodc SPECO Multi Client Ver 3 0 4 4 Site Addition Site Info Site Name DARS Site Address d4rs ddns specoddns net Port Humber 5445 ID admin Password TED Cancel 7 Input Site Name Site Address IP address Port No and Password on the connect window e Site Name Input a name that properly describes a site e IP Address Domain name or Public IP address of a router that DVR is connected e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Password is 1111 92 TE 8 And select the OK button Then press button afte
24. ME T 2 Select the proper TIME ZONE time PRIMARY SNTP SERVER ss SECONDARY SNTP SERVER TIME ZONE GMT 0 0 sbo 1do fona 3 CONNECTION MODE CONNECTION PERIOD Table2 3 1 GMT Time Zone Alaska Aleutian Islands GMT 10 13 gt R Arkansas GMT 6 GMT 5 kano oms o Co Wwe GM GM kv Kentucky cms GM amp Kentucky Gute cms tina ers ame m Megan cms GM m wmm me s 14 lt i LE loge UO U o OH Ohio GMT 5 GMT 4 Oregon E PA sc SD South Dakota W TN Tennessee E TN Tennessee W Texas W oT v A WA Ww W wy NOTE If you want the unit to automatically synchronize the local time the Time Zone must be properly set according to your local time zone 15 3 Name Function and Connection 3 1 Front Panel DxxRS DxxWRS Figure 3 1 1 Front panel Table 3 1 1 Front LED and Port of DxxRS name Bep HDD LED ightis on when the system is recording video data 3 2 Connectors e Do not power this system on before all the connections are completed e Make sure all the connections are properly secured Faulty connection may result in the system being damaged D4RS 000000 868 GESeco r t t A IEI BC J EIEEIEIRD Power D16RS D16WRS Figure 3 2 1 Connectors VIDEO IN Video input port VIDEO OUT D4RS Switchable Composite Video Outpu
25. NTROLLER ID SENSOR TYPE APPLY CLOSE Figure 4 4 4 Device Mode Setup Screen 2 Open the PTZ sub menu by selecting the submenu button CONTROLLER SPEED ID CHANNEL CAMERA SPEED ID ra dg g4 4313 17 US Figure 4 4 5 PTZ Control Setup Screen 28 Note Connect PTZ cameras that support RS 485 directly to the RS 485 port If the camera is controlled through an RS 232C interface use an RS 232C to RS 485 to RS 232C signal converter Use the PTZ setup screen to select the following options for the camera PTZ controller CHANNEL Channel connected to a PTZ device CAMERA Protocol Type SPEED 19200 14400 9600 4800 2400 Baud rate ID 0 63 Controller Keyboard Controller If a PTZ controller is used select a controller protocol from Controller menu Set SPEED Baud Rate and ID number 4 4 3 Spot Out SPOT ON EVENT SPOT EVENT DWELL TIME SEQUENCE SEQUENCE DWELL TIME SPOT CHANNEL OK CANCEL Figure 4 4 6 SPOT OUT Setup Screen Table 4 4 4 Menu Item in SPOT OUT Setup Screen Item Description SPOT OUT Only 1 Spot Out is available to use To use the Spot out function on DARS Video Resolution has to be setup as 1280x1024 Video Resolution Output can be setup on DISPLAY MENU SPOT TYPE SPOT 1 supports only FULL type 1 channel only SPOT ON EVENT Enable disable channel change if an event occurs on a channel SPOT EVENT oet the dwell time for the display of the event activa
26. OST NAME nostname SUBMIT UPDATE When manual host name input is done move the cursor to this item and select ON to submit the settings ezDDNS Enable disable ezDDNS to register the host name automatically 4 6 3 Network Stream User can set the RESOLUTION FRAME RATE and the QUALITY for the network stream D4RS Up to 60 fps CIF for 4 channels D8RS D16RS Up to 120 fps CIF for 8 channels amp 16 channels Note Individual Channels can be set with different RESOLUTION FRAME RATE and QUALITY Figure 4 6 4 NETWORK Setup Screen Network Stream 34 4 7 Setup USER MANAGEMENT Mode In the SETUP menu select the USER MANAGEMENT tab Then the USER MANAGEMENT menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item E Ss mM q np Figure 4 7 1 USER MANAGEMENT Setup Screen Table 4 7 1 Menu Items in USER MANAGEMENT Setup Screen Item AUTHORITY SETUP Description Only the Admin will have access to the menu PASSWORD CHECK Select the Checkbox to enable the functions or leave the Checkbox blank to disable the functions SETUP Enable Disable of access to Setup PB Enable Disable of access to Playback PTZ Enable Disable of access to PTZ Control R OFF Enable Disable of manual Record NETWORK Enable Disable of access to Network selected Checkbox The DVR will ask for a p
27. SMISSION MODE Sending an image only of the channel when an alarm event Is triggered IP NOTIFICATION Enable disable sending e mail when the IP address of your DVR is changed SMART Enable disable sending e mail reports when S M A R T is triggered EVENT ALARM Enable disable sending e mail reports when an alarm event is triggered MAIL PORT Mail port setting SEURE OPTION Select a secure mail server connection SSL or TLS Mail to Input the appropriate email address to enable sending e mail reports Mail Server Input the SMTP server name as well as the user ID and password Mail From Return Mail Address Set the source e mail address to be notified to the destination 5 USER NAME Name the DVR 67 7 7 2 Record Select RECORD tab to set the recording conditions Remote setup SPECO WEB SETUP SYSTEM DEVICE DISPLAY NETWORK STORAGE UPGRADE SITE CH1 RESOLUTION D1 FRAME RATE QUALITY LEVEL 4 RECORDING MODE MOTION PRE RECORD 15 SECOND S POST EVENT RECORD 49 SECOND S AUDIO S ON OFF EZRecord APPLY EZRecord RESOLUTION 1 FRAME RATE 4 FPS QUALITY LEVEL 4 RECORDING MOTION DAYS TO RECORD 896 DAY S 22 HOUR S RELOAD APPLY These settings apply to the specified channel only 1 Recording Setup Resolution Sets the resolution for the recordings The set value applies to an individual channel Frame Rate Sets the recording rate Quality Sets the image quality in 5 levels Recording Sets
28. ancel My devices Confirm 6 Select the saved site from My Device for network connection 7 The app will display the live streaming video My devices Live View Notice Data Usage applied without Wi Fi connection Please check with your Phone Carrier 87 APPENDIX Network Connection LAN IP Router or HUB 1 Install the network client software from the supplied CD 2 Check the IP address from SETUP gt SYSTEM gt DESCRIPTION or SETUP gt NETWORK of DVR SOFTWARE VERSION Ver 3 2 1 07 11 2011 STORAGE SIZE 217 GB IP ADDRESS 192 168 1 111 MAC ADDRESS 00 02 69 00 00 01 DDNS STATUS DDNS OFF 3 Run the network client software speco technologies SPECO Multi Client Ver 3 0 4 4 CE gm C2 Ce 88 Site Addition Site Info Site Name DARS Site Address 192 168 1 111 Port Number 5445 ID admin Password sess Cancel Input Site Name Site Address IP address Port Number and Password on the connect window e Site Name Input a name that properly describes a site e IP Address Input IP address e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Password is 1111 E Select a site by checking the box and Press EN button to connect to the site 0 HH speco technologies CH 2 NO VIDEO CH 3 CH 4 NO VIDEO NO VIDEO CS Om os 2011 07 19
29. aneous Video Output OFF e SPOT OUTPUT ON VCA RECN INK VGA RESOLUTION l CVBS OUTPUT ON SPOT OUTPUT OFF D8RS D16RS D8WRS D16WRS CVBS1 Composite Video Output CVBS2 Spot Out port 4 6 Setup NETWORK Mode Select the NETWORK tab Then the network menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu EN SELCE Figure 4 6 1 NETWORK Setup Screen 32 Table 4 6 1 Menu Items in NETWORK Setup Screen Item Description NETWORK TYPE DHCP DVR will automatically retrieve an IP address from the network STATIC Network information must be manually configured IP Enter IP address that is assigned for the DVR SUBNET MASK Enter Subnet Mask that is assigned for the DVR GATEWAY Enter Gateway that is assigned for the DVR DNS PRIMARY Enter Primary DNS address that is assigned for the DVR DNS SECONDARY Enter Secondary DNS address that is assigned for the DVR DDNS Dynamic Domain Name System DDNS allows a DNS name to be constantly synchronized with a dynamic IP address In other words it allows using a dynamic IP address to be associated with a static domain name so others can connect to it by the static name Enable disable using domain name address through DDNS server NETWORK PORT Enter the port number WEB PORT Enter the port number for connection using web NETWORK STRE
30. assword when the given function is selected for all users Blank Checkbox The DVR will not ask for a password when the given function is selected for all users 35 OK Cancel ADMIN USER1 USER2 USER3 Selected Checkbox The user can access the function Blank Checkbox The user can not access the function PASSWORD SETUP Options are ADMIN USER1 USER2 and USER3 oelect USER PASSWORD using the mouse or the control button on the remote control and press SEL button Select user type and enter the current password And enter a new password enter the same password again to confirm and select OK Then the message PASSWORD CHANGED is displayed The factory default password is 1111 It is highly recommended to assign a new password to protect the system AUTHORITY OF PLAYBACK Set authority level of playback on each user Checked box authorized to playback Blank check box no authority OK CANCEL 36 4 8 Setup STORAGE Mode In the SETUP menu select the STORAGE tab Then the STORAGE menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item Eg e T Figure 4 8 1 STORAGE Setup Screen Table 4 8 1 Menu Items in STORAGE Setup Screen Item Description OVERWRITE When enabled the DVR will continue recording and overwrite the oldest existing recorded d
31. ata once the hard drive is full When disabled recording will stop once the hard drive is full DISK FORMAT You will have an option of YES or NO for formatting the Hard Drive After formatting HDD the DVR will reboot AN Caution It is recommended to archive any data that you may need in the future before formatting the hard drive 3 WARNING Are you sure to format disk if Y a s h rps y c I em Ww Please wait DISK INFO Hard drive information Displays the following information HDD SIZE 435 GB FREE 311 GB HDD START TIME 01 03 2004 01 05 00 HDD LAST TIME 07 12 2011 16 41 00 Health sine ta rr HDD 1 HDD AAABBB1234567890 46 C 114 F 117 days 23 hours Good OK DETAIL RECORDING Enable disable recording limit LIMIT RECORDING Set the recording limit days 1 90 days LIMIT DAYS If the RECORDING LIMIT DAYS are set to 1 the data will be overwritten after 24 hours S M A R T Set the alarm and beep by setting the HDD temperature limit Alarm will trigger alarm output Buzzer will trigger beeping from the internal speaker TEMPERATURE LIMIT ON ON 38 4 9 Setup CONFIG Mode In the SETUP menu select the CONFIG tab Then the configuration menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item ea em T p h Fig
32. ch Mean Time regardless of geography user must set their own time difference CONNECTON MODE Select the NTP time server connection mode from TIME INTERVAL and ONCE CONNECTION PERIOD TIME Refresh the time at the designated time e g 1AM INTERVAL Every 1 hour 24 hours ONCE Synchronizes time only once NTP will not synchronize unless the Connection Mode is changed SEND EMAIL TRANSMISSION MODE Sending an image of an event channel IP NOTIFICATION Enable disable sending e mail when the IP address is changed MAIL BY MOTION Enable disable sending e mail when the motion is detected MAIL BY SENSOR Enable disable sending e mail when sensor input is received Only applies to D8RS D16RS models MAIL BY VIDEO LOSS Enable disable sending e mail when the video loss is detected MAIL BY S M A R T Enable disable sending e mail when S M A R T is triggered MAIL PORT Assign Mail Port number SEURE OPTION Select the secure mail server connection method SSL or TLS MAIL TO Enter the appropriate email address to enable sending e mail reports using a virtual keyboard MAIL SERVER Enter the appropriate mail server information 22 ID Enter the appropriate mail server ID PASSWORD Enter the appropriate mail server PASSWORD MAIL FROM To set the email address sent to the destination host UNIT NAME Name the DVR e g Factory This feature is to identify the name of the DVR under the same network
33. ch Multi Client icon displays on the desktop screen SpecoTech Multi Client 57 7 4 Live Window When installation is completed double click the SpecoTech Multi Client icon on your desktop to start the program 7 4 1 Main User Interface speco technologies ES E E EX DARS IP 192 168 1 151 SPECO Multi Client Ver 3 0 4 4 Click this icon to run a playback window to search and play videos that are recorded in the local PC LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in the remote DVR REMOTE PLAYBACK 58 En THUMBNAIL REFRESH Click this icon to refresh and renew thumbnail image of the connected sites SITE ADDITION Click this icon to open Site Addition window E SITE DELETE Click this icon to delete site from the index window after disconnect a site SITE MANAGEMENT NET FINDER Select the site from the index window and click this icon to modify the information of specific site E CONNECT Click this icon to connect the selected site sites E HMM Click this icon to disconnect the selected site sites Click this icon to setup configuration of UMS MULTI CLIENT LN CAPTURE Click this icon to capture a still image 2 EVENT LIST Opens list of events logged by the UMS Multi Client TE AUSE Click this icon to play pause live video m ALARM ON Click this icon to turn on off alarm outputs Enable or disable recording of live video to local
34. d time in the GO TO 49 SPECIFIC TIME menu Use the mouse or the control button on the remote control to change the date and time value and press the PLAY button after setting If there is no video data in the set date and time No Data Exist message displays 5 3 6 Archive List The ARCHIVE Search window is used to find previously stored video or images Set gt i i i s b de de de de gt 1 T n L L WEIS ound lt PREV DISPLAY CLOSE Figure 5 3 6 Archive Search Screen When the Archive menu is selected the user can see a calendar which has recording data Select a specific date and then the archived data will be displayed Press the Display button to view the still image or the first frame of the selected video then the user can save the selected data 5 3 7 Log List You can access the LOG list search screen by selecting LOG on the SEARCH window Video Loss SECOND 11 02 2011 08 18 43 Video Loss FOURTH 11 02 2011 08 19 16 Video Loss 11 02 2011 15 44 19 11 02 2011 15 44 21 11 02 2011 15 49 15 11 02 2011 15 49 15 11 02 2011 15 49 15 11 02 2011 15 49 15 11 02 2011 15 49 15 Figure 5 3 7 Log List Screen When the Log menu is selected the user can see a calendar which has a log data Select a specific date and press NEXT button and then the log data will be displayed Press the SAVE button to save the data and then the data is saved as a text file format 50 5 4 Play Mode During p
35. ddition Site Info Site Name DARS Site Address 192 158 1 111 Port Number 5445 ID admin Password one al o Site Name Input a name that properly describes a site o IP Address Input IP address Public IP address of a router that DVR is connected or Domain name o Port Number Default Port Number is 5445 o ID Input ID of DVR Default ID is admin o Password Input network password of DVR Default Password is 1111 2 Click OK button And then the registered site is added on the directory window 7 8 1 2 Deleting a Site 1 Select the site sites to delete from the directory window 2 Click MSS SITE DELETE button And then the selected site sites is are deleted 73 7 8 1 3 Modify of Sites 1 Select the site sites to modify from the directory window 2 Click Es NET FINDER button And then the following window will be displayed as below Net Finder Address 192 168 1 151 3 Click MODIFY button And then the modified information is displayed as below Site Modify Site Info Site Name D4RS Site Address 192 168 1 151 Port Number 5445 ID admin Password Channels Channels Ch No 4 2 3 4 74 7 8 2 Connect and Disconnect 7 8 2 1 Connect 1 Select site sites to connect from the directory window 7 8 2 2 Disconnect 1 Select site sites to disconnect from the directory window SPECO Multi Client Ver 3 0 4 4 7 8 3
36. e any heavy or sharp objects on the unit e Do not place on uneven surface e Do not expose to shock or vibration e Do not move the unit when the unit is powered on e Do not block and allow dust to accumulate in the air vents e Do not restrict airflow of the unit doing so can damage the unit e Only qualified and experienced personnel should perform installation and servicing e Turn off the power of the DVR when connecting Cameras Audio or Sensor Cables e The manufacture is not responsible for any damage caused by improper use of the product or failure to follow instructions for the product e The manufacture is not responsible for any problems caused by or resulting from the user physically opening the DVR for examination or attempting to repair the unit e The manufacture may not be held liable for any issues with the unit if the warranty seal is removed Product Components Please make sure the following components are included as specified below DVR Unit j D4WRS D8WRS D16WRS or DARS D8RS D16RS Remote Control vee of hie 547 Battery1 5V AAA x 2EA speco technologies Quick Start Guide Mouse for D4RS D8RS D16RS amp Software amp Manual CD Lg Adaptor DC12V 3A for DARS DAWRS DC12V 5A for D8RS D16RS D8WRS D16WRS amp Power cable 110V or 220V Audio Cable for D8RS D16RS D8WRS D16WRS Specifications 4CH 8CH 16CH Composite 1 0Vp p 75ohm T NTSC PAL 1 VGA 1024x7
37. er will ensure the safety of your home and office at anywhere and anytime Speco Viewer DVR list DVR4HD It is very useful to following customers Anti theft monitoring for a private office located where a lot of people float around Buildings with easy access of outsiders and cashers Factory and warehouse monitoring of outsiders entrance Office and public places Couples with frequent business trip leaving old parents and children at home B Homes that use personal safe A a O Search Notice SPECO VIEWER is for the RS WRS and HD series DVRs SPECO VIEWER is not compatible with the T Series DVR s TH TN or TL or the PC Series DVR s 3 Install the Speco Viewer app 4 Open the installed Speco Viewer App wi AT amp T 3G 10 33 AM 90 gt a A Edit My Site List My Site Speco viewer for iphone speco technologie 5 Select the in the top right corner for site addition 6 Input the Site Information and select Save to save the Site Information 84 Q 90 Gab 10 33 AM My Site Save mil AT amp T 3G Cancel Site Information Site My Site gt IP DNS gt Port 5445 gt ID admin gt Password gt 7 Select the saved site from My Site List 8 Select a channel s to view pt AT amp T 3G 10 34 AM Q 89 EE mem AT amp T 3G 10 35 AM Q 89 D Speco Viewer Speco Demo Speco Viewer Speco Demo Edit Select channels Max 4 channels Se
38. her 512MB or higher S O Windows 2000 XP Professional XP Home Vista 7 NOTE Not all versions of Vista and 7 are supported 10 100 1000Base T Direct X 10 or higher Before installing the program check the PC specifications The DVR remote software may not perform correctly if the PC does not meet the minimum requirements 96 7 3 Installation of the Program 1 Insert the provided CD in the CD drive and double click SpecoTech Multi Client XXXX exe 2 Select a destination folder and click Next InstallShield Wizard Choose Destination Location Select folder where Setup will install files Setup will install SpecoT ech Multi Client in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder EA ASpeco Technologies5pecoTech Multi Client Browse InstallShield Back Next gt Cancel 3 Select the program folder and click Next InstallShield Wizard Select Program Folder Please select a program folder Setup wall add program icons to the Program Folder listed below ou may type a new folder name or select one from the existing folders list Click Next to continue avast Free Antivirus CMS DTS5 AC3 Filter DR InstallShield Back Cancel 4 The installation status screen is displayed 5 After the installation is completed SpecoTe
39. ing CONTINUE CONTINUOUS recording Highlighted in Green MOTION MOTION recording Highlighted in Yellow SENSOR SENSOR recording Highlighted in Red D4RS does not support SENSOR RECORDING 25 4 4 Setup DEVICE Mode In the SETUP menu select the DEVICE tab Then the device menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item d v d ES L SEL Figure 4 4 1 DEVICE Setup Screen Table 4 4 1 Menu Items in DEVICE Setup Screen Item Description ALARM OUT Set the sensor motion and video loss for triggering alarm relay HDD Error and Video Loss can trigger beeping DARS does not support ALARM OUT CONTROLLER amp oet the PTZ baud rate protocol and ID PTZ DARS does not support CONTROLLER amp PTZ SPOT OUT D4RS D4WRS CVBS OUT is switchable as Composite Video Output or Spot Out according to the resolution of VIDEO OUTPUT VGA D8RS D16RS D8WRS D16WRS CVBS1 Composite Video Output CVBS2 Spot Out SITE oelect specified channel for motion zone setup MOTION ZONE Select either Full Zone or Partial Zone for motion detection MOTION oet the motion sensitivity for the selected channel 26 SENSITIVITY Control the motion sensitivity from 1 to 9 9 Highest sensitivity 1 Lowest sensitivity KEY TONE Enable disable key tone REMOTE oet the remote contr
40. isplay 78 7 8 5 2 Playback of Recorded Video on Remote DVR 1 Click Le REMOTE PLAYBACK And then Playback Window will be displayed over the Live Window SPECO Multi Client Ver 3 0 3 6 2 Select the site to connect from the directory window 3 Click CONNECT And then Green bar displays on Search calendar and timeline scale window SM TWT FS 1 2 LIEN 7 8 39 10 11 12 13 14 15 16 TE 18 19 20 24 22 23 z 28 29 30 4 Move the marker on the timeline scale to where there is video data and press the PLAY button E 2 14 16 5 Video data that is recorded on the remote DVR is play backed 79 7 8 6 AVI Backup during Playback You can back up the recorded videos in AVI format during playback 1 Double click the target channel to backup 2 Select the beginning time by using the search calendar and timeline scale bar NR E amp 1 2 i e 7 8 9 10 11 12 13 14 15 16 1 18 19 20 24 22 23 24 25 29 3 4 Click LE MARK OUT button on the timeline scale to select the ending point of the backup Then the selected starting point and the ending point on the timeline scale bar will be marked in green Select Channels CH 1 CH 2 CH 3 CH 4 v All Setting Start Time i 17 18 End Time 01 18 43 File Path C Storage Backup File format Ay 80 6 You can also set the beginning time and ending time on this window After selecting a channel for backup click
41. layback of a recorded event the mode changes from SEARCH to PLAY While in PLAY mode you may return to the SEARCH screen by pressing the X button on the status bar Figure 5 4 1 Play Mode Screen The following status bar hides automatically and appears again if a mouse pointer is positioned to the bottom of the screen Table 5 4 1 Button Functions in PLAY Mode Button Description Press to rewind the footage of multi channel e 1x 2x 4x 8x 16x 32x speeds for D4RS D4WRS 4 e 1x 2x 4x 8x 16x for DBRS D8WRS e 1x 2x 4x 8x for DIGRS D16WHRS Single Channel backward playback speed 1x 2x 4x 8x 16x 32x 64x Jump Step backward The playback position moves 60 seconds backward gt Il Press to play or pause recorded video gt Jump Step forward Playback position moves 60 seconds forward Press to fast forward the footage of multi channel e 2x 4x 8x 16x 32x speeds for D4RS D4WRS gt gt e 2x 4x 8x 16x for DBRS DSWRS e 2x 4x 8x for DI6RS D16WRS Single Channel forward playback speed 1x 2x 4x 8x 16x 32x 64x Slow Mode play Forward playback speed x1 4 x1 2 Y gt e Press to backup the video Return to the previous menu screen search window or exit from the Menu 91 6 Back Up 6 1 Still Image Backup onto USB Flash Drive Still images can be captured and archived onto a USB flash drive or an external hard drive in live mode or while playing back recorded video In the live
42. le Alarm outputs SITE Press the button to view the record setting of a selected channel INFORMATION SYSTEM Press the button to view the system information INFORMATION SOFTWARE VERSION STORAGE SIZ NETWORK TYP P ADDRESS 00 02 69 00 00 01 DDNS OFF UNIT NAME SPECO RS4 REMOTE CONTROLLER ID SYSTEM Lock Unlock Setup button LOCK SYSTEM SHUTDOWN 45 5 1 1 PTZ Control Table 5 1 3 Menu Items in PTZ Control Window INITIALIZE Initialize the PTZ settings of the selected camera PAN TILT ZOOM FOCUS AUTOSCAN PRESET TOUR Select PAN TILT using the Aw 4 and button then press SEL Adjust the tilt UP DOWN pan LEFT RIGHT position using the AV and P gt buttons Select ZOM FOCUS using theAw and P gt buttons then press SEL Adjust the zoom UP DOWN focus LEFT RIGHT position using the AW d and gt buttons select OSD to enter the menu Control keys are Right Left UP Down Select Far REW KEY and Near FF KEY Press the ESC button to return to the previous menu Press the PTZ button to close the OSD menu Press the right key gt to start auto scan Press the left key 4 to stop auto scan Select PRESET then press the left key 4 A number input window will appear Set the number 3digits using the number key then press the SEL to confirm the preset number for the current position Press the right key gt and enter the number 3digits to go to the preset positio
43. lect channels Max 4 channels We le td 14 tO TU tl lz 19 14 te EN Auto reconnect Auto reconnect Connect Connect Site Information Site Information Site Speco Demo Site Speco Demo 9 After selecting a channel the app will display the channel s 10 31 AM 10 31 AM Q 91 ab ail AT amp T 3G 10 31 AM Q 91 lab l AT amp T 3G alll AT amp T 3G 3 Speco Demo Speco Demo M P speco speco Connecting M speco speco a B Notice Data Usage applied without Wi Fi connection Carrier 85 Q 90 Ga alll AT amp T 3G 10 32 AM 9 90 D Speco Demo Please check with your Phone 10 2 App Viewer for Android Phone 1 Enter the Android Market A Sa 2 Search Speco Viewer in the Android Market and install the Speco Viewer app MENTI Las 8 10 PM Q Open speco technologies Uninstall A o y speco viewer Speco Tech My review Let others know what you think of this application Rate it Description speco viewer will ensure the safety of your home and office at anywhere and anytime 3 Open the installed Speco Viewer App un AT amp T 3G 10 33 AM Q 90 ma Speco viewer for iPhone 4 Select the ADD in the top right corner for Site Information p 55 31 PM My devices FA DEMO 86 3 5 Input the Site Information and select CONFIRM to save the Site Information 3G CO 4 25 PM C
44. mote control and select the appropriate daylight saving time zone If choosing EU or OTHERS set the applicable conditions The options are OFF Daylight saving is turned off USA Applies the USA daylight saving time EU Applies the EU daylight saving time Select the GMT AREA using the mouse or the control button Set the time difference with the standard time using the mouse or the control button OTHERS If the time zone is neither USA nor EU set the start and end date of the daylight saving period Select BEGIN or END using the control button and press the SEL button Select the item using the mouse or the control button select the setting value using the control button and press the ESC button to return to SET DATE amp TIME setup menu Caution Do not set the start time to 23 00 for DLS DLS cannot be applied if the date of BEGIN and END is the same CLIENT ACCESS Enable Disable remote access through the network NTP SETUP NTP Network Time Protocol which synchronizes the time of the computer systems over variable latency data networks PRIMARY SNTP SERVER ANTAS ES SECONDARY SNTP SERVER TIME ZONE GMT 0 00 Lisbon London Monaco Y CONNECTION MODE TAE CONNECTION PERIOD 03 00 AM i OK CANCEL 21 PRIMARY SNTP SERVER Input the address of the primary NTP time server SECONDARY SNTP SERVER Input the address of the secondary NTP time server TIME ZONE NTP synchronizes with GMT Greenwi
45. n Select TOU and press the right key A number input window will open Select a number 1digit using a number key then press SEL to start the tour Press the left 4 key to stop the tour Preset the number of the tour group in the OSD menu NUMBER For the TOUR and PRESET menu el Press ESC to return to the main menu 46 5 2 Digital Zoom in Live and Playback Screen RS series supports Digital Zoom feature during live and playback mode 1 Double click the target channel 5 3 SEARCH Screen To enter the search screen menu select SEARCH menu on the screen using the mouse or press SEARCH icon on live screen Figure 5 3 1 Search Screen There are 7 ways of search menu such as TIME LINE Calendar SEARCH EVENT GO TO FIRST TIME GO TO LAST TIME GO TO SPECIFIC TIME ARCHIVE LIST and LOG LIST on the screen 47 5 3 1 Time Line Search The CALENDAR Search window is used to find the stored video by using the time line bar Nov 2011 Wed Thu INEXT gt CLOSE Figure 5 3 2 Calendar Screen Channel 2 nem CH4 lt PREV PLAY CLOSE Figure 5 3 3 Time Line Search Screen When the Timeline menu is selected the user can see a calendar which displays recorded dates with highlights Select a specific date and time Click and drag the red time indicator bar to the desired hour User can select a specific minutes using a button in the above red box Press the PLAY button after
46. nter the password of the DVR when prompted NOTE The default password is 1111 Setting is the same as with the DVR menu setting Refer to the corresponding pages for details on the setting items WEB SETUP wiw PASSWORD LOGIN 66 7 7 1 System Select System to set system and time settings Remote setup SPECO WEB SETUP RECORD DEVICE DISPLAY NETWORK STORAGE UPGRADE E DATE DISPLAY FORMAT MM DD YYYY CLIENT ACCESS Je Ie NTP SETUP PRIMARY SNTP SERVER Pool ntp org SECONDARY SNTP SERVER Time nist gov TIME ZONE GMT 0 00 Lisbon London Monaco CONNECTION MODE CONNECTION PERIOD 03 00 AM SEND EMAIL SETUP TRANSMISSION MODE MAGE IP NOTIFICATION SMART ON MAIL PORT SECURE OPTION NONE o z O OHNO Mg eye MAIL TO smart specotech com MAIL SERVER mail specotech com ID specotech PASSWORD MAIL FROM UNIT NAME 1 Date Display Format YYYY MM DD MM DD YYYY DD MM YYYY YYYY MM DD MM DD YYYY DD MM YYYY 2 Client Access Enable Disable remote access through network client software 3 NTP Sets whether to synchronize the time using NTP server or not Primary SNTP Server Inout the NTP primary server address Secondary SNTP Server Input the NTP secondary server address Time Zone Select the time zone Connection Mode Select the connection mode to NTP time server Connection Period Set the connection period 4 Send E Mail Sets whether to enable disable e mail sending function TRAN
47. o the network set a unique port number to each DVR Web Port Set a web server port number Network Stream Set the Resolution Frame Rate and the Quality 71 7 7 6 Storage select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the recording data Remote setup SPECO WEB SETUP n SYSTEM RECORD DEVICE DISPLAY NETWORK G UPGRADE OVERWRITE ON OFF RECORDING LIMIT OFF SMART TEMPERATURE LIMIT 45 C 113 F ALARM GON OFF BUZZER QON OFF RELOAD APPLY 1 Overwrite To continue recording by overwriting when the hard disk becomes full check the checkbox 2 Record Limit Sets whether to limit or not the recording data storage period Record Limit Days Sets a recording data storage period 3 S M A R T Sets the TEMPERATURE LIMIT of the Hard Disk to trigger the ALARM and the BUZZER 7 7 7 Remote Upgrade SPECO WEB SETUP SYSTEM RECORD DEVICE DISPLAY NETWORK STORAGE Current S W Version Ver 3 2 1 07 13 2011 SEARCH UPGRADE RELOAD APPLY e Shows the current Firmware version installed on DVR Browse Select BROWSE to locate the firmware file Upgrade Select UPGRADE to upgrade the firmware of the DVR 72 7 8 Operation 7 8 1 Addition Delete and Modify of DVR Sites 7 8 1 1 Addition of Sites 1 Click SITE ADDITION button And then the following window will be displayed as below Site A
48. ol ID CONTROL ID 1 Select ID 2 Input the remote control ID number 3 An icon will indicate on the Live Screen if the remote control ID is synchronized The options are from 0 to 99 SENSOR Select the type of each sensor Option is Off Normal Open or Normal Close 4 4 1 Alarm Out ALARM OUT a SENSOR IN et GE SE l3 MOTION ON uw ES a BEL VIDEO LOSS ON Se EJE EE EE ALARM DURATION l60 SECOND S X ERROR ALARM ALL LE ox ma Figure 4 4 2 ALARM OUT Setup Screen Table 4 4 2 ltem for ALARM OUT Setup Screen ltem Description ALARM OUT Only one Alarm out is available SENSOR IN Sensor input from 1 to 4 MOTION ON Camera motion detection from 1 to 4 VIDEO LOSS ON Camera video loss detection from 1 to 4 ALARM DURATION Set alarm dwell time from 5 to 60 seconds ERROR ALARM Set the error type for the alarm activation The options are OFF ALL HDD ERROR and VIDEO LOSS 2 4 4 2 Keyboard Controller amp PTZ Setup To control the PTZ functions of the camera connect the PTZ controller to the RS 485 port on the back of the chassis with CAT5 or equivalent cable D Connect the RS 485 cables of PTZ camera to the RS 485 port on the rear panel Inputs RS 485 D RS 485 D DAWRS D8 16RS D8 16WRS Figure 4 4 3 Device Mode Setup Screen ALARM OUT CONTROLLER amp PTZ SPOT OUT SITE CH 1 X MOTION ZONE FULL ZONE Xem MOTION SENSITIVITY KEY TONE REMOTE CO
49. on temperature During 5 C 40 C During storage 10 C 50 C operation Unit Weight Gross weight DxxRS Around 3 74 lbs Around 7 Ibs Unit Dimension W x H x D DxxRS 13 6 x 2 56 x 10 48 Please note that specifications and unit exterior design are subject to change without notification Table of Contents le Mah Folie EURO E o En E PO e E En RO PROPHET RO and ace Nha ate nec 10 2 IARI OCU Ua LOGEC SS tiu ax alec wal raat aera wa a aera wk aaa aera aa 11 2 1 Initial Boot up and Basic Time Setup eee eee aaa 11 2 2 oeuihg Daylight Saving iMac ia 12 2 3 Setting NTP Network Time Protocol eee eee 13 o Name Funci on ana GConnesllOllz iio ala oa 16 ION o dd ed at OS 16 9 2 CONNEGLOI Surreal IUE Med RUE 16 FRMO CONTO AA PP e ea O INIRE 18 4 SEU MA a a e eet Seem ene cere eee 19 4 1 Setup Mali LIVE Screen 19 A 2 oeU OVO TEM MOG ninia 20 SAO A AAA A ee One Stat iu ua Satu SE Ma 23 AH 37 le Becordingsechedul s ascia OC M DM LP d LE 25 44 Setup DEVICE OO scott aetate tet a arae a decade o raped tame as 26 DEINEN T o o CO o e rl sala Balul dineu eat aleag 27 4 4 2 Keyboard Controller amp PTZ Setup eee eee en aaa 28 AS O e o L as las iasa catene tate ia 29 4 4 4 MOT ON Zone Delta aiii 30 4 5 oc DISPLAY Modena 31 4 6 Sep NE WORK Mod a a A aa a A 32 alos NN nonsequ C T Sau a A 33 A0 2 DDNS E 33 A 6 3 NetWork Stred
50. ording mode for the selected channel Options are MODE Continuous Motion Schedule or Disable SENSOR Select the sensor setting for the selected channel RECORDING D4RS does not support SENSOR RECORDING PRE RECORD Enable disable pre event recording Pre event recording time is up to 20 minutes POST EVENT Set the post event recording time duration for the specified channel RECORD 10 30 seconds AUDIO Enable disable audio recording for the specified channel SCHEDULE Set the recording schedule EZRECORD Set the recording by EZRecord feature The EZRECORD has high priority than other setting values on RECORD User can change the setting value such as resolution frame rate quality and recording type By the setting value the DAYS TO RECORD will change accordingly RESOLUTION CIF FRAME RATE 1 FPS QUALITY LEVEL 1 L RECORDING DAYS TO RECORD CONTINUOUS 21 DAY S 23 HOUR S APPLY CLOSE 24 4 3 1 Recording Schedules To setup a recording schedule select SCHEDULE in the RECORD menu Navigate through the items using the mouse or the control button Select CHANNEL gt select NONE CONTINUOUS or MOTION gt HIGHLIGHT AREA To copy a schedule to a different channel select the channel from the COPY SCHEDULE menu CHANNEL A NONE CONTINUOUS CLEAR 012 3 4 5 6 78 9 101112 131415 20 212223 E me WED CH 1 Cancel Figure 4 3 2 Schedule Recording Setup Screen NONE Disable record
51. r checking the left check box NE o ll speco technologies Been CH 2 NO VIDEO IP d4rs ddns specodk CH 3 CH 4 NO VIDEO NO VIDEO Ce Om o CE 2011 07 19 11 24 09 93 APPENDIX E SATA CONNECTION Please read the following instructions before using the E SATA port Failure to do so may cause serious damage to the recorded video SPECO is not responsible for data loss caused by improper usage e Use ONLY a new HDD or a HDD that is pre formatted on a PC e Turn off the DVR before plugging the E SATA HDD e DO NOT disconnect the E SATA port while the DVR power is on e The purpose of the E SATA port is to extend recording capacity e Once connected DO NOT remove or disconnect the E SATA port from the DVR e The E SATA port does not support the hot swappable function 94
52. rity Motion Detection Simple and Easy Graphic User Interface Easy Record Setup Feature EZRecord Simple Scheduler Firmware Upgrade by USB port or Network Instant and Convenient Backup via USB Flash Drive or Network Exclusive File Format Backup and Player Variety of Ways Network Access via CMS Network Client Software Web Viewer and Mobile Viewer S M A R T Self Monitoring Analysis and Reporting Technology for HDD 10 2 Initial Boot up Process 2 1 Initial Boot up and Basic Time Setup 1 During the first boot up the following logo and message will be displayed speco technologies Initializing system It may take a few seconds or minutes to check system EM 0 Initializing 2 After the system initializing is completed select the language and set date and time as specified below Choose language ENGLISH dS Set date and time SET DATE amp TIME 2 2 Setting Daylight Saving Time To enable Daylight Saving feature NTP synchronization take the following steps 1 VIDEOLOSS VIDEOLOSS INFORMATO VIDEO LOSS 07 07 2011 12 34 56 OK CANCEL 2 Goto SETUP gt SYSTEM gt DATE amp TIME SETUP 12 3 Select ON from the DAYLIGHT SAVING dropdown menu 2 3 Setting NTP Network Time Protocol 1 SETUP gt SYSTEM gt NTP SETUP gt ON 3 E H m1 NTP SETUP END E m Es d MAIL S F E VI MIL ML did 0 0 JNIT NA
53. selecting the specific time Press the PREV to return to the SEARCH window 48 5 3 2 Event Search The Event Search window is used to find stored video CONTINUOUS 11 02 2011 01 00 01 CONTINUOUS 11 02 2011 01 00 02 MOTION 11 02 2011 01 20 28 CONTINUOUS 11 02 2011 02 00 01 CONTINUOUS 11 02 2011 02 00 01 CONTINUOUS 11 02 2011 03 00 01 276 log s found Figure 5 3 4 Event Search Screen When the Event menu is selected the user can see a calendar which has recorded data Select a specific date and the event log will be displayed Press the PLAY button to playback the data or the SAVE button to save the data after selecting the specific data User can find a data of the specific channel and event using a button in the above red box as following Figure 5 2 5 Press the PREV to return to the SEARCH window Channel p X FIRST SECOND 4 THIRD lt i FOURTH pEvent ALL i MOTION SENSOR MANUAL CONTINUOUS Figure 5 3 5 Event Search Screen 5 3 3 Go To First Time You can access from the oldest recorded data on the DVR hard drive by selecting GO TO FIRST TIME on the SEARCH window Press the PREV to return to the SEARCH window 5 3 4 Go To Last Time You can access from the last minute recorded data on the DVR hard drive by selecting GO TO LAST TME on the SEARCH window Press the PREV to return to the SEARCH window 5 3 5 Go To Specific Time User can search for video data from a specific instance by setting the date an
54. t aa a 56 78 INSA ATION OF ING Hr FOCI AI us aod aaa defin ER A edi RE Daia a a id 57 A E 58 E o A dinate UU ermine A il 58 154 2 CONTO BULLONE e sosi poata pt ta a de ti la da n la a a 58 7 9 Searen and Playback WINGOW s necesite r deep ae Reb eene RU pap aput etapas Bra at et ra at Ei Bia UE 60 l le Mall User der db uos cuni taca dau ltd CN aM EN taca ea 60 7 9 2 Malt Gohtrel Paneles coe insta ahs Sd 60 7 6 Setup of Speco Tech Multi Client eee na 62 TOV ANG Della ae dacii auz Donau a A Dan Dea ai Di aa oa aid Dc acuz Doc at d Dn caz e au ROS EE 62 OZ uii ct ans E aia Goer tt liantul aa aa 63 TO RECO pe c cC TER 64 F04 A aet e da sda feda e ad Daa atouts ah Oncaea aad a a a Nias i eS e a 65 A IL DM DU E LE EE 65 T7 FOmote ell men eet eRe mae aen DEC M DE IU pM EIN ENDE o ac iz is 66 Drei 67 PoP 2 ROCO r 68 T STE MI BIST Io ri site asa NEN THEE 69 Foe Bcc tel CET 70 WP Oe NGIWO OPE OPERA CTO E O acs T EE 71 pe oe 8 ec Lo Seema ne An mo e O o ee eee 72 Fe IEEE DOEIGI E isa inoate ie A ati Reece ame A E SON A D td aa ee T 72 Fico wen Dol e 010 lamer eer eee tal santa cani sune aia A cin ES 73 7 8 1 Addition Delete and Modify of DVR Sites eee 73 7 8 2 Connect and Disconnect imersie aa ea eine spe uode dala iii 75 7 8 3 Still image Capture During Live cc eee nana ana 76 7 8 4 Recording Video on Local PC During Live esses 77 7 8 5 Local Playback and Remo
55. t or Spot Monitor D8RS D16RS CVBS1 Composite Video Output CVBS2 Spot Monitor VGA VGA Video Graphics Array output port Connects to the PC VGA monitor RS 232C for DBRS D16RS D8WRS D16WRS only For engineering use only the function is used by a gender through the VGA output AUDIO IN Four connectors for audio input DBRS D16RS D8WRS D16WRS use an audio cable AUDIO OUT One connector for audio output D8RS D16RS D8WRS D16WRS use an audio cable ETHERNET Network terminal USB USB terminal E SATA External SATA port for extension storage SENSOR IN ALARM OUT RS 485 External sensor terminal External alarm out terminal amp RS 485 for PTZ Camera control POWER DC12V input Cooling fan 17 3 3 Remote Control Sooo amp amp e o eco hina pecera gt 2 M al Typical Remote Control SH BACKUP i ID To set the remote control ID REC To start and stop manual recording 0 9 To select channel 1 2 3 or to enter a DVR ID number or use as number key F REW e During playback To move the playback position 60seconds back e During Pause To move the playback postion 1 frame back F ADV e During playback To move the playback position 60seconds forward e During Pause To move the playback position moves 1 frame forward REW To rewind the recording PLAY PAUSE To play or to pause the recording in playback mode FF To fast forward the recording Direction buttons To
56. te Playback eee eee eee eee eee 78 7 8 6 AVI Backup aurina PlayDack se se scie caiete et act ai i a o rc a d a id 80 8 Network Access Using the Web Browser Viewer eee eee eee anna 82 9 Network Access Using the Smart Phone Viewer nennen nennen 84 LADO VICWEN OW IE TIO PG uei incisione ta onu az nda rb oma ez ete a a a is ino Uus n a 84 10 2 ADO VIEWER TOF ANGIOId PHONG usado APPENDIX Network Connection LAN cccccceccceeeceeeeceeeeeeeteneeseeeteuceseueeseeeteeeseeeesaeetsusesseetaneess 88 APPENDIX Network Connection Internet and DDNS ocoocccncccncncccncccncccncccncocnconnnonncnnnonnnonnnonnnonnnos 90 APRENDI ESSATSSOONNEGCTIOIN ssim ater tat ant din tete Bran a e ue diceris ac ie o cune Gu a 94 1 Main Features B H 264 Video Compression B Reliable File System B 4 Channel Audio Recording NOTE Under federal law The Fourth Amendment to the U S Constitution Title III of the Omnibus Crime Control and Safe Streets Act of 1968 as amended by the Electronic Communications Privacy Act of 1986 18 U S C 2510 et seq and the Foreign Intelligence Surveillance Act of 1978 50 U S C 1801 et seq permit government agents acting with the consent of a party to a communication to engage in warrantless interceptions of telephone communications as well as oral and electronic communications Automatic Video Input Video Loss and HDD Error Detection Covert Camera Operation Provides Enhanced Secu
57. ted channel DWELL TIME 1 10sec SEQUENCE Enable disable sequential display of spot channel in full screen If select ON the selected channel will be displayed on the monitor periodically SEQUENCE oet the dwell time for the spot channel display 1 10sec DWELL TIME SPOT CHANNEL Select a channel for spot monitoring using the mouse or the control button on the remote control and press OK button 29 4 4 4 Motion Zone Setup Select MOTION ZONE using the mouse or the control button on the remote control and select either PARTIAL ZONE or FULL ZONE using the mouse control The default value is FULL ZONE If FULL ZONE is selected the motion zone grid screen is not displayed Only set the level of sensitivity for MOTION SENSITIVITY FULL ZONE The motion sensor is active on the whole screen PARTIAL ZONE The motion sensor is active in the set detection frame Select the motion detection position using the mouse or the control button on the remote control Then left click on the mouse or left click and drag the mouse pointer to select or deselect the area Highlighted area indicates the partial motion detection zone Press the ESC button or right click on the mouse to return to the previous menu AUFAN AA IED A489 7 DAN RRR a 7 Ps MINA IN VEER 4 7 272 BEEN V e a v E N Wy ae Bl A 1 A EM EN m a NS LIII T ER IUSSHEEYECT A AAN AA ae ne 4 4 7 Motion Zone Grid Screen ot
58. the OK button The backup will begin Select Channels CH 1 CH 2 CH 3 CH 4 All Setting Start Time 01 17 18 End Time 01 19 43 File Path CiStorage Backup File format Ayl 7 AVI video data is recorded as set in AVI Backup window AVI format video can be played back by using Window Media Player or other media player that is compatible with AVI format video PN Ii 81 8 Network Access Using the Web Browser Viewer The DVR provides a live remote monitoring feature by web browser viewer NOTE Web Brower is only available for Internet Explorer 1 Check the IP address of the DVR from SETUP gt SYSTEM gt DESCRIPTION gt IP ADDRESS or 2 Input the IP address or Domain name address that you pre registered Address Go 3 Click this bar Then the dialog box is displayed 3 This site might require the Following ActiveX control WebViewer from Click here to install 4 Click Install to download and install the ActiveX control gi User Account Control O Do you want to allow the following program to make changes to this computer B Program name SpecoTech WebViewer verl 4 8 7 Verified publisher Speco Technologies File origin Downloaded from the Internet v Show details 5 The Web Browser Viewer will be displayed as below after the ActiveX installation speco technologies S Connect pa Di Live fe Search 2011 04 2
59. the recording mode Recording Mode CONTINUOS SCHEDULE MOTION Pre Record Sets whether to perform or not pre recording Post Event Record Sets the duration of the event recording Audio Sets whether to perform or not audio recording These settings apply to all channels 2 EZRECORD Resolution Sets the resolution for the recordings The set value applies to an individual channel Frame Rate Sets the recording rate Quality Sets the image quality in 5 levels Recording Mode Sets the recording mode RECORD Days By the setting value the Recording Days will change accordingly 68 7 7 3 Device Select Device to set Spot Out Enable Disable CVBS Out motion zone Remote setup A SPECO WEB SETUP SYSTEM RECORD D DISPLAY NETWORK STORAGE UPGRADE MOTION SITE CH1 MOTION ZONE PARTIAL ZONE z MOTION SENSITIVITY KEY TONE GON OFF REMOTE CONTROLLER ID RELOAD APPLY 1 Motion Setup the motion detection area and the sensitivity SITE Select the channel MOTION ZONE FULL Zone or PARTIAL Zone Motion Sensitivity 1 9 High sensitivity level 2 Key Tone Sets On or Off of Key Tone 3 Remote Controller ID Sets an ID number on the supplied remote control for its identification 69 7 7 4 Display Select the DISPLAY tab to set the DISPLAY conditions Remote setup i SPECO WEB SETUP SYSTEM RECORD DEVICE NETWORK STORAGE UPGRADE GOON OFF 1 SEQUENCE GOON Ie SEQUENCE
60. u 19 4 2 Setup SYSTEM Mode In the SETUP menu select the SYSTEM tab Then the SYSTEM menu is displayed as pictured below Navigate through the menu items using the mouse or the remote control and change the value of the menu item A 4A qm veri tos SYSTEM DESCRIPTION LANGUAGE DATE DISPLAY FORMAT DATE amp TIME SETUP CLIENT ACCESS NTP SETUP UNIT NAME Figure 4 2 1 SYSTEM Setup Screen Table 4 2 1 Menu Items in SYSTEM Setup Screen Item Description DESCRIPTIO Press the button to view the system information Software Version Storage Size IP N Address MAC Address and DDNS Status SOFTWARE VERSION Ver 3 2 1 07 11 2011 STORAGE SIZE 217 GB IP ADDRESS 172 16 20 30 MAC ADDRESS 00 02 69 00 00 01 DDNS STATUS DDNS OFF LANGUAGE Select the display language using the mouse or the control button on the remote control Once a language is selected the display language will change 20 DATE DISPLAY Select the date display format using the mouse or the control button on the remote FORMAT control Options are MM DD YYYY YYYY MM DD DD MM YYYY YYYY MM DD MM DD YYYY DD MM YYYY DATE amp TIME SETUP Select the display date and time using the mouse or the control button on the remote control and press OK button to set the present date and time DAYLIGHT SAVING 4 SET DATE amp TIME pom y PIS fl oo OK CANCEL oelect DAYLIGHT SAVING using the mouse and the control button on the re
61. ure 4 9 1 CONFIGURATION Setup Screen Table 4 9 1 CONFIGURATION Setup Item Description EXPORT TO User can save the current configuration Setting values of the DVR to the USB USB flash drive Plug in the USB flash on the front panel and press the button to start the saving process Are you sure to save config to USB IMPORT User can upload the configuration of the DVR to another DVR using the USB FROM USB Flash drive Plug in the USB flash drive on the front panel and press the button to start the loading process 39 LOAD DEFAULT Are vou sure to load default cor if YES system will restart The following settings such as Language DVR ID Security User Authentication Security User P W Date format DLS settings Network settings HDD overwrite Limit recording HDD serial number and HDD ERROR time will not be included LOAD Press the button to reset the system to the factory default settings FACTORY DEFAULT WARNING to load factory default config if YES system will restart SOFTWARE Upgrade softeware to the latest version UPGRADE After connecting USB flash drive to USB port on the DVR click SEARCH It will automatically find the upgrade file 40 4 9 1 Firmware Upgrade 1 Create a new folder named upgrade in the USB flash drive root directory 2 Create sub folder for each model under upgrade folder and copy each firmware e DARS main DARS speco 201 e D8RS main
62. utton And the color of button is changed 5 Live video data is recorded as set in Record and Disk setup These video data can be searched and play backed with Local Playback File Edit View Favorites Tools Help Q Back amp d Search lig Folders 3y A x EI Address 3 C Storage WNCO1 Mame Size Type Date Modified 6 8 2009 4 00 PM 6 10 2009 3 16 PM 3 17 2009 6 24 PM 3 17 2009 5 35 PM 3 17 2009 5 44 PM 3 17 2009 5 52 PM 3 17 2009 6 23 PM 20090608 File Folder 20090610 File Folder 20090317 ndl 4 275 KB NDL File i 20090317_0 ndb 102 402 KB NDB File 20090317_1 ndb 102 403 KB NDB File 20090317 2 ndb 102 402 KB NDB File 20090317 3 ndb 73 845KB NDB File 77 7 8 5 Local Playback and Remote Playback 7 8 5 1 Playback of Recorded Video on a Local PC 1 Click EJ LOCAL PLAYBACK And then Playback Window will be displayed over the Live Window SPECO Multi Client Ver 3 0 4 4 2 Select site sites to connect from the directory window E 3 Click i CONNECT button And then Green bar displays on Search calendar and timeline scale window SMTWHIi iF amp 4 2 EBENEN Te 3 TU 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 29 30 8 Move the marker on the timeline scale to where there is video data and press the PLAY button I I 16 18 9 Video data that is recorded on local PC will be play backed 10 Use the mouse scroll to digitally Zoom in and out from a single channel d

Download Pdf Manuals

Related Search

Related Contents

Epson Stylus Pro 9600  レンジフード取付説明書  10～11ページ  BEDIENUNGSANLEITUNG  uu093-rev03 mn30 Speed_Depth Display user guide.qxp  KM8403001 KM8403021 KM8403101 EURO Appliances  instructivo para el sistema de reporte en linea - sirel  Aspire Digital 8930Q Laptop User Manual  LA Generator - Computer and Network Security Group  A-dec 機器の保守点検チェックリスト  

Copyright © All rights reserved. Failed to retrieve file