Home

Sony CDP-CX225 User's Manual

image

Contents

1. Playing CDs 1 Insert discs into the slot of the block you want referring to the table See also Inserting CDs on page 6 2 Press one of the BLOCK 1 8 buttons to select the block When using the remote press BLOCK the number button of the block you want then ENTER The block number appears in the display 3 Press Block Play starts from the disc which is the most upward number within a block and located closest to the playing position Ke You can start Block Play from the disc you want When you want to start Block Play from the disc you want turn the JOG dial to select the disc then press ENTER To cancel Block Play Press the corresponding BLOCK 1 8 button Note The block number does not appear if no disc is put into the block you specified 15 Additional Information Precautions On safety e Caution The use of optical instruments with this product will increase eye hazard e Should any solid object or liquid fall into the cabinet unplug the player and have it checked by qualified personnel before operating it any further On power sources e Before operating the player check that the operating voltage of the player is identical with your local power supply The operating voltage is indicated on the nameplate at the rear of the player e The player is not disconnected from the AC power source mains as long as it is connected to the wall outlet even if the player itself has been
2. To Press Pause H Resume playing after pause H or gt Go to the next disc F DISC SKIP once Hold down the button to skip discs Go back to the preceding disc F DISC SKIP once Hold down the button to skip discs Go to the next track gt D Go back to the preceding track KK OPEN and then ENTER The disc comes to the loading position Stop playing and remove the disc suoneado 2iseg 10 Playing CDs Locating a Specific Disc ENTER JOG DISC Number buttons ENTER Selecting a disc on the player Turn the JOG dial until the disc number you want appears in the display Press ENTER to start play Selecting a disc directly using the remote F 1 Press DISC 2 Press the number button of the disc Example To enter number 35 Press 3 then 5 To enter number 100 Press 1 then 0 twice 3 Press ENTER to start play Specifying the Next Disc to Play You can specify the next disc to play while playing a disc in Continuous or 1 DISC Shuffle Play mode While playing a disc turn the JOG dial until the disc number you want appears in the display Next disc number ALL DISCS DISC TRACK Min SEG NEXTpISc eu i ogg JH cD1 After the current disc is played the next disc you have specified starts playing If you want to skip to the next disc right away press ENTER wh
3. Group on page 15 If you have already inserted discs the disc number at the playing position appears When you turn the JOG dial the displayed disc number changes to the one at the loading position Insert a disc with the label side facing right Notes e Make sure you have inserted the disc into each slot at a right angle to the rotary table If the disc is not put in straight it may damage the player or the disc e Make sure the rotary table comes to a complete stop before inserting or removing discs With the label side facing right 5 Repeat Steps 3 and 4 to insert more discs Getting Started 6 Close the front cover by pressing the right edge of the cover until it clicks The rotary table turns and the disc slot at the loading position is set to the playing position Always close the front cover except when you insert or remove discs xe The supplied CD booklet holders help you locate a disc You can store up to 200 CD booklets Insert booklets and stick the number label on the film of a pocket and the booklet so that you can locate the disc easily Notes e When you insert an 8 cm 3 inch CD be sure to attach a Sony CSA 8 adaptor not supplied to the disc Do not insert an empty 8 cm 3 inch CD adaptor CSA 8 It may damage the player Do not attach anything such as seals or sleeves to CDs It may damage the player or the disc e If you drop a disc into the player and the CD won t go into
4. discs in random order The player keeps shuffling tracks until you stop playback 1 DISC All tracks on the specific disc in random order The player may play the same track more than once 2 When you want to specify the disc for 1 DISC Shuffle Play turn the JOG dial until the disc number you want appears in the display 3 Press ENTER or D gt ALL DISCS or 1 DISC Shuffle Play starts ee J appears in the display while the player is shuffling the discs or the tracks To cancel Shuffle Play Press CONTINUE cer You can start Shuffle Play while playing Press SHUFFLE and Shuffle Play starts from the current track Playing CDs You can directly select a disc for 1 DISC Shuffle Play F 2 Turn the JOG dial until the disc number you want See Selecting a disc directly using the remote on page 10 appears in the display xe You can go to the next disc during 1 DISC Shuffle Play Press DISC SKIP i i Disc number O You can specify the next disc to play during 1 DISC Shuffle Play 3 To program a whole disc skip this step Press Turn the JOG dial to specify the next disc After all the KKA until the track number you want tracks on the current disc are played in random order appears in the display the next disc starts playing If you want to skip to the next disc right away press ENTER while playing the current disc pisc TRACK eu Note You cannot specify the next disc t
5. harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment This equipment is intended for home entertainment purposes only The warranty shall be invalidated if used in commercial environments such as by disc jockeys etc even within the Warranty Period Owner s Record The model and serial numbers are located at the rear of the unit Record the serial number in the space provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No CDP CX225 Serial No ES l U Welcome Thank you for purchasing the Sony Compact Disc Player Before operating the unit please read this manual thoroughly and retain it for future reference About This Manual The instructions in this manual are for model CDP CX225 Conventions e Instructions in this manual describe the controls
6. on the player You can also use the controls on the remote if they have the same or similar names as those on the player The following icons are used in this manual Indicates that you can do the task using the remote Im Indicates hints and tips for making the task easier 5 TABLE OF CONTENTS Getting Started Unpacking issin teatime siedistedin a ae aaa Hooking Up the System ns rting CDS irseananen a a a a a eee eeedhies Pl ying a 0 Seater ere ee a a eee eee eee 8 Playing CDs Locating a Specific Dise srs gece caires cists chi een dee eea a i raai 10 Specifying the Next Disc to Play ccccccssssesesssesseesssssseteseseesesssssessessssseenessssseeenssesees 10 Locating a Specific Track or a Point in a Track ccccessseseseeseseseeeeeseseeseseseseesenssesees 11 Playing Repeated ly sseni aia a coll acted AE EE Playing in Random Order Shuffle Play wate Creating Your Own Program Program Play cccssesseseseseesesesesessessseseesessseseeenessees 13 Playing Discs in a Group Block Play ccscessssesessesessseeseseseseeeseseseesessssseeessseseenessseees 15 Additional Information PreGAUHONS 335 4 ho ecdss ied a ein inn dae ieee RS 16 Notes on CDs sti3 aver ie aie seh a eh ashen OA eh he ee eee A RA 16 Troubleshooting scsi se As teh haa ban ae ete ateen Reset taee 17 Specifications isisa A R E E ERRA 17 Getting Started Unpacking Check that you received the follo
7. play mode REPEAT Press REPEAT while playing a disc REPEAT appears in the display The player repeats the discs tracks as follows When the disc is played in The player repeats ALL DISCS Continuous Play All tracks on all discs page 8 1 DISC Continuous Play All tracks on the current disc page 8 ALL DISCS Shuffle Play The player does not repeat page 12 discs tracks but keeps shuffling until you stop playback whether or not you press REPEAT 1 DISC Shuffle Play All tracks on the current disc page 12 in random order Program Play page 13 The same program To cancel Repeat Play Press REPEAT repeatedly until REPEAT disappears from the display Repeating the current track You can repeat only the current track While the track you want is being played press REPEAT repeatedly until REPEAT 1 appears in the display Playing in Random Order Shuffle Play You can have the player shuffle the tracks and play in random order The player shuffles all the tracks on all discs or on the disc you specified SHUFFLE gt ENTER JOG 1 Press SHUFFLE to select ALL DISCS or 1 DISC Shuffle Play mode Each time you press SHUFFLE ALL DISCS or 1 DISC appears in the display When you select The player plays ALL DISCS All tracks on all
8. remote for an extended period of time remove the batteries to avoid possible damage from battery leakage and corrosion Hooking Up the System Overview This section describes how to hook up the CD player to an amplifier Be sure to turn off the power of each component before making the connections COMMAND DIGITAL OUT CONTROL Alll MODE OPTICAL CD player 8 h RA To an AC outlet To line output R To line output L To audio input Amplifier 5 o Signal flow To an AC outlet What cords will I need Audio cord 1 supplied White White L L Red Red R R Getting Started Hookups When connecting the audio cord be sure to match the color coded cord to the appropriate jacks on the components Red right to Red and White left to White Be sure to make connections firmly to avoid hum and noise xe When to use the COMMAND MODE selector The COMMAND MODE selector is set to CD1 at the factory for normal use You can control this player by connecting to a Sony CD Player with the player control function via the CONTROL A1 I jacks When making this connection set the COMMAND MODE selectors of each player to the appropriate position according to the CD player Amplifier If you have a digital component such as a digital amplifier D A converter DAT or MD Connect the component via the DIGITAL OUT OPTICAL connector using an optical cable not supplied Take off t
9. remove all the discs from the player and turn the power off If you have any questions or problems concerning your player please consult your nearest Sony dealer Notes on CDs On handling CDs e To keep the disc clean handle the disc carefully e Do not stick paper or tape on the disc Do not expose the disc to direct sunlight or heat sources such as hot air ducts nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car e After removing a disc from the disc slot store the disc in its case On cleaning e Before playing clean the disc with a cleaning cloth Wipe the disc from the center out ea SE Do not use solvents such as benzine thinner commercially available cleaners or anti static spray intended for vinyl LPs Additional Information ee 7 Specifications ees Troubleshooting If you experience any of the following difficulties while using the player use this troubleshooting guide to help you remedy the problem Should any problem persist consult your nearest Sony dealer There is no sound gt Check that the player is connected securely gt Make sure you operate the amplifier correctly The CD does not play gt There is no CD in a slot no dISC appears Insert a CD gt Insert the CD with the label side facing right gt Clean the CD see page 16 gt Moisture has condensed insid
10. the slot correctly consult your nearest Sony dealer e When transporting the player remove all discs from the player Removing CDs After following Steps 1 to 3 of Inserting CDs on page 6 remove the discs Then close the front cover Note The disc being played does not come to the loading position if you open the front cover during playback The disc number flashes in the display If you want to remove the disc being played press ENTER in the center of the JOG dial after opening the front cover The disc comes to the loading position Remove the disc after the rotary table comes to a complete stop Basic Operations Playing a CD 2 3 See pages 4 5 for the hookup information Make sure you have inserted the discs correctly as indicated on page 6 You can play all the tracks ona disc in the original order Continuous Play You can also play up to 200 discs consecutively CY You can turn on the player by pressing POWER on the remote 4 Sevres 7 x a C a Turn on the amplifier and select the CD player position N Press POWER to turn on the player Press CONTINUE to select ALL DISCS or 1 DISC Continuous Play mode Each time you press CONTINUE ALL DISCS or 1 DISC appears in the display When you select The player plays ALL DISCS All discs in the player consecutively in the order of disc number Empty di
11. turned off e If you are not going to use the player for a long time be sure to disconnect the player from the wall outlet To disconnect the AC power cord mains lead grasp the plug itself never pull the cord e AC power cord must be changed only at the qualified service shop On placement e Place the player in a location with adequate ventilation to prevent heat build up in the player e Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom e Do not place the player in a location near heat sources or in a place subject to direct sunlight excessive dust or mechanical shock On operation e If the player is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lenses inside the player Should this occur the player may not operate properly In this case leave the player turned on for about an hour until the moisture evaporates On adjusting volume e Do not turn up the volume while listening to a portion with very low level inputs or no audio signals If you do the speakers may be damaged when a peak level portion is played On cleaning e Clean the cabinet panel and controls with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine 16 On transportation e When transporting the player press OPEN then
12. 120 V AC 60 Hz 13W When the front cover is closed 430 x 200 x 480 mm 17 x 7 7 8 x 19 in incl projecting parts When the front cover is open 430 x 200 x 600 mm 17 x 7 7 8 x 23 5 8 in incl projecting parts 9 0 kg 19 lbs 14 oz Audio cord 2 phono plugs 2 phono plugs 1 Remote commander remote 1 Size AA R6 batteries 2 CD booklet holders 2 Label 1 Design and specifications are subject to change without notice 17 18 Index A AMS 11 Automatic Music Sensor 11 B Block Play 15 C D Connecting 4 Continuous Play 8 E F G Erasing programs 14 H Handling CDs 16 Hookups overview 4 Inserting CDs 6 J K JOG dial 6 L M NO Locating a specific point 11 a specific track 11 by monitoring 11 by observing the display 11 directly 11 discs 10 using AMS 11 P Q Playback Block Play 15 Continuous Play 8 Program Play 13 Repeat Play 12 Shuffle Play 12 Program changing 14 checking 14 erasing 14 Remote control 4 Repeating 12 Rotary table 6 S Searching See Locating Selecting a disc 10 Shuffle Play on all discs 12 on one disc 12 Specifying the next disc 10 T Troubleshooting 17 U V W X Y Z Unpacking 4 Names of controls Buttons BLOCK 15 BLOCK 1 8 15 CHECK 14 CLEAR 14 CONTINUE 8 DISC 10 DISC SKIP 9 ENTER 9 Number 11 OPEN 6 PROGRAM 13 REPEAT 12 SHUFFLE 12 TRACK 11 KK AA 9 cS 9 Wi 9 E 9 lt gt 11 Switches CD1 2 3 5 POWER 6 J
13. SONY Compact Disc Player Operating Instructions DIGITAL AUDIO CDP CX225 To prevent fire or shock hazard do not expose the unit to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only RISK OF ELECTRIC SHOCK DO NOT OPEN H CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert AN the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause
14. acks CONTROL A1 5 LINEOUT 5 Connectors DIGITAL OUT OPTICAL 5 Others COMMAND MODE selector 5 Disc slots 6 Display 9 Front cover 6 JOG dial 6 8 Rotary table 6 4 Sony ine http www world sony com Sony Corporation Printed in Malaysia
15. e the player Press OPEN and leave the player turned on for about an hour see page 16 The remote does not function gt Remove obstacles in the path of the remote and the player gt Point the remote at the remote sensor on the player gt Replace all the batteries in the remote with new ones if they are weak gt Set the CD1 2 3 switch on the remote according to the position of the COMMAND MODE selector displayed in the front panel display see page 5 The player functions incorrectly gt The microcomputer chips may be operating incorrectly Disconnect the AC power cord then connect it back to the wall outlet to reset the player Compact disc player Laser Laser output Frequency response Signal to noise ratio Dynamic range Harmonic distortion Semiconductor laser A 780 nm Emission duration continuous Max 44 6 wW This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick up block with 7 mm aperture 20 Hz to 20 kHz 0 5 dB More than 100 dB More than 98 dB Less than 0 0045 Channel separation More than 95 dB Outputs Jack Maximum Load impedance type output level LINE OUT Phono 2V Over 10 kilohms jacks at 50 kilohms DIGITALOUT Optical 18 dBm Wave length 660 nm OPTICAL output connector General Power requirements Power consumption Dimensions approx w h d Mass approx Supplied accessories
16. he cap and plug in the optical cable POC 15 _ gt b _L gt Optical cable not supplied CD player Digital component OPTICAL OPTICAL ic Note When you connect via the DIGITAL OUT OPTICAL connector noise may occur when you play CD software other than music such as a CD ROM If you have a Sony receiver amplifier equipped with the CONTROL A11 jack Be sure to connect the player to the CD IN jacks on the receiver amplifier When making this connection set the COMMAND MODE of the player to CD1 see the illustration below If you further connect the player and the receiver amplifier via the CONTROL A1 II jacks with the monaural 2P mini plug cord not supplied you can use the Auto Function feature between these components For details refer to the supplementary CONTROL A1 II Control System instructions and the instructions supplied with the receiver amplifier connected line input jacks For details refer to the instructions supplied with the connected player COMMAND MODE Cv When using another Sony CD player together with this player You can make the supplied remote effective only for this player e When using the player equipped with the COMMAND MODE selector Set the COMMAND MODE selector of this player to CD1 and that of another player to CD2 or CD3 Then set the CD1 2 3 switch on the remote supplied for each player accordingly e When usi
17. ile playing the current disc To cancel the disc you have specified Press CONTINUE twice Locating a Specific Track ora Point in a Track You can quickly locate any track while playing a disc using the KK1 gt P1 AMS Automatic Music Sensor buttons or number buttons on the remote You can also locate a specific point in a track while playing a disc KK AA TRACK Number buttons ENTER kaa gt r ea Aaa Playing CDs To locate Press the next or gt D repeatedly until you find the succeeding tracks track the current or KK repeatedly until you find the preceding tracks track TRACK the number button of the track and then ENTER When you locate a track with a number over 10 press the 10 s digit first then the 1 s digit a specific track directly T a point in a track gt gt forward or lt lt backward and while monitoring the hold down until you find the point sound T a point in a track PP forward or lt lt backward and quickly by observing hold down until you find the point the display T during pause You will not hear the sound during the operation Note If 7 appears in the display the disc has reached the end while you were pressing P gt Press lt 4 or KK to go back 11 12 Playing CDs Playing Repeatedly You can play discs tracks repeatedly in any
18. ng the player not equipped with the COMMAND MODE selector The command mode of the player without the COMMAND MODE selector is set to CD1 Set the COMMAND MODE selector of this player to CD2 and set the CD1 2 3 switch on the remote to CD2 Connecting the AC power cord Connect the AC power cord to a wall outlet Note on placement Be sure to place the player on a horizontal place If the player is slanted it may cause malfunction or damage the player ee Vi p Xf Getting Started Inserting CDs You can insert up to 200 discs into this player POWER Front cover OPEN JOG Playing position Rotary table Loading position T Press POWER to turn on the player 2 Press OPEN 3 Turn the JOG dial until you find the disc slot where you want to insert a disc while checking the disc number written beside every five slots and also indicated in the display Disc number Disc slot at the loading position The disc number at the loading position appears in the display As you turn the JOG dial the disc number changes ALL DISCS di5L 20 Disc number You can arrange your discs into groups and play them within a certain group using the Block Play function When using this function you have to insert discs into the slots assigned to one of the eight groups For details see Playing Discs in a
19. o play during ALL DISCS Track number Shuffle Play 4 Press ENTER or PROGRAM SEE ay The track being programmed Creating Your Own Program Program Play You can arrange the order of the tracks and or discs to The disc being Playing order create your own program and the program is stored programmed automatically A program can contain up to 32 steps one step may contain a track or a whole disc You can make a program using the controls on the remote as well as the ones on the player However the programming procedures are different All tracks of another disc s 2 and 4 5 To program other discs tracks do the following To program Repeat Steps Other tracks on the same disc 3 and 4 Creating a program on the player Other tracks on other discs 2to4 PROGRAM IXX D gt 1 ENTER OG J 6 Press to start Program Play CFS To cancel Program Play Press CONTINUE 0080 ooo o o g 5 We 0000 The program remains even after Program Play ends When you press E gt you can play the same program again gt CHECK CLEAR Cr When you press PROGRAM during Continuous or Shuffle Play 1 Press PROGRAM The program will be played after the current track If a program is already stored the last step of the program appears in the display When you want to f erase the whole program hold down CLEAR until The program remains until you era
20. ogrammed order You can change your program before you start playing To You need to Erase a track or disc Press CHECK until the track or disc you want to erase appears in the display then press CLEAR Erase the last track or disc in the program Press CLEAR Each time you press the button the last track or disc will be cleared Add tracks or discs to the end of the program Follow the programming procedure Erase the whole program completely Hold down CLEAR until All Clr appears in the display to erase the whole program then create a new program following the programming procedure Erasing the program stored in memory 1 Press PROGRAM in the stop mode 2 Hold down CLEAR until All Clr appears in the display a O O Playing Discs in a Group Block Play You can classify discs in advance by artists category etc when inserting discs into the slots and play them only within the group called block you specified The player has eight blocks and each slot is assigned to one of the blocks as shown below Block number Disc slot 1 1 25 26 50 51 75 76 100 101 125 126 150 151 175 CoOIrNy any oye wy n 176 200 You can enjoy Continuous Shuffle or Repeat Play within a certain block BLOCK 1 8 a BLOCK Number buttons ENTER
21. sc slots are skipped 1 DISC Only one disc you have selected Turn the JOG dial until the disc number you want appears in the display to select the first disc ALL DISCS or the disc you want 1 DISC ALL DISCS diSL 20a cpt xe When you turn off the player by pressing the POWER switch standby mode The player remembers the last playing disc and the play mode Continuous Shuffle see page 12 or Program see page 13 When you turn on the player again therefore the player plays the same disc in the same play mode Note that the player does not remember this information if you turn off the player by pressing the power switch of the amplifier or receiver while the AC power cord is connected to the switched AC outlet of the amplifier or receiver Basic Operations Press ENTER to start playing 5 The selected disc is set to the playing position and the player plays all the discs from the selected one ALL DISCS or all the tracks once 1 DISC Adjust the volume on the amplifier Display information while playing a disc While playing a disc the display shows the current disc number track number playing time of the track and the next disc number Current disc number Next disc number ALL DISCS TRACK l Current track number Playing time of the track To stop playback Press W OPEN KK gt D 1 ENTER
22. se them All Clr appears in the display see page 14 If you replace discs the programmed disc and track numbers remain So the player plays only the existing disc and track numbers However the disc and track numbers that are not found in the player or on the disc are deleted from the program and the rest of the program is played in the programmed order 13 14 Playing CDs Creating a program using the remote f i PROGRAM TRACK DISC Number buttons ENTER CHECK CLEAR ce Press PROGRAM Press DISC Press the number button of the disc mh W N P To program a whole disc skip this step and go to Step 6 Press TRACK 5 Press the number button of the track 6 Press ENTER 7 To program other discs tracks do the following To program Repeat Steps All tracks of another disc s 2 3 and 6 Other tracks on the same disc 4to6 Other tracks on other discs 2to6 8 Press to start Program Play To cancel Program Play Press CONTINUE Checking the programmed order You can check your program before or after you start playing Press CHECK Each time you press this button the display shows the disc and track number of each step in the programmed order When a whole disc is programmed as one step AL appears instead of the track number After the last step in the program the display shows End and returns to the original display Changing the pr
23. wing items e Audio cord 1 Remote commander remote 1 e Size AA R6 batteries 2 e CD booklet holders 2 and label 1 Kej How to use the CD booklet holder The CD booklet holder helps you locate the disc easily After you have inserted discs into the player you can put the CD booklet which comes with a CD into the supplied holder Put two CD booklets facing back to back into a pocket Stick the number label on each pocket matching the number of the disc slot where you have inserted the disc You can put up to 200 CD booklets into the holders Inserting batteries into the remote You can control the player using the supplied remote Insert two size AA R6 batteries by matching the and on the batteries to the diagram inside the battery compartment Insert the negative end first then push in and down until the positive end clicks into position When using the remote point it at the remote sensor on the player CY When to replace batteries With normal use the batteries should last for about six months When the remote no longer operates the player replace all the batteries with new ones Notes e Do not leave the remote near an extremely hot or humid place e Do not drop any foreign object into the remote casing particularly when replacing the batteries e Do not expose the remote sensor to direct sunlight or lighting apparatuses Doing so may cause a malfunction e If you do not use the

Download Pdf Manuals

image

Related Search

Related Contents

  すらすら旅行会話 for PalmOS  Smartscan User Manual  Cobra Combi  PRO CBM 2™  有田川町広報2012年12月号≪vol.84  c-pro 3 hecto MCSA  Samsung Galaxy S4 Наръчник за потребителя(LL)  

Copyright © All rights reserved.
Failed to retrieve file