Soleus Air Fan FSM-45 User's Manual
Contents
1. 8 The fan should be kept out of the reach of children Close supervision is necessary when the fan is used by or near children 9 Do not operate this or any appliance with a damaged cord if the unit malfunctions or if it has been dropped or damaged in any manner Connect to properly polarized outlets only 10 Do not cover the cord or place near heat sources Keep the cord away from high traffic areas and do not submerge in water 11 Unplug the fan before moving cleaning or making repairs NOTE If for any reason this unit requires service return appliance to manufacturer or a similarly qualified service agent to ensure safety 12 To reduce the risk of fire or electric shock do not use this fan with any solid state speed control device 13 To disconnect grip plug and pull from wall outlet Never pull on the cord to unplug 14 For indoor use only A e 1 Three slot Grounded Grounding Outlet Pin ADAPTER Mounting B Screw Two slot Grounding Grounded Grounding Pin ab Outlet WARNING This fan has a grounded three pronged plug intended to fit into a three slot outlet A An adapter is available for connecting three pronged plugs into two slot outlets B When doing so the green grounding tab extending from the adapter must be fastened under the wall plate s mounting screw The adapter should not be used if a three slot outlet is available DO NOT DEFEAT THE SAFETY2. INSTRUCTIONS 1 Set the fan on a stable level surface 2 Confirm that the Speed Control Knob is set to O off Plug the cord into a standard 120V A C outlet 3 Adjust to the desired speed setting O Off Low Speed Medium Speed High Speed 4 The fan can operate in oscillation or stationary mode Press the Oscillation Knob down to activate the oscillating mode To stop oscillation pull Knob up 5 Unplug the fan when not in use Adjustment Instructions e adjust the angle of the fan head loosen the adjustable tilt knob and move the fan head to the desired angle Firmly tighten the knob to secure into place e To adjust the height of the fan turn the adjustable height knob counter clockwise to loosen the stand Adjust the fan to the desired height then firmly tighten to secure into place CLEANING MAINTENANCE e Set the Speed Control Knob to off and unplug the unit e Clean the fan head base and pole using a damp cloth and a mild detergent if necessary Make certain all detergent residues are removed e Never use abrasive cleaning agents or solvents This may cause damage or deterioration to the surface of the unit e Do not immerse the fan in any form of liquid Do not allow water to drip on or into the fan motor housing Fan Blade Cleaning 1 Make certain the fan is unplugged Unlock the metal clips on the front grill and remove the front grill Use a Phillips screwdriver to loosen the sec
3. PURPOSE OF THE GROUNDED PLUG TECHNICAL SPECIFICATIONS Voltage Rating 120V 60Hz Power Consumption 60W Unit Size 20 in W x 16 in D x 47 in H 16 5 16 Unit Weight This product employs overload protection fuse blown fuse indicates an overload or short circuit situation If the fuse blows unplug the product from the outlet Replace the fuse per the instructions below and check the product If the replacement fuse blows a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and or repair HOW TO REPLACE THE FUSE 1 Unplug the fan from the outlet Place the plug on a firm flat surface Open the fuse cover located on the top of the plug using your thumb or a flathead screwdriver to slide the over towards the prongs TWEEN NOTE Ensure that the fuse cover is completely open before Ce rer VAN attempting to remove the fuse exe iB AE 2 Remove the fuse carefully by using small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse selle 3 Risk of fire Insert a new 2 5 Amp 125 Volt fuse provided e NE with product into the fuse compartment making sure that the fuse is securely in place 4 Slide the fuse cover closed completely If the fuse cover is difficult to close make sure the fuse is properly secured in place by pressing down on the metal ends of
4. the fuse CAUTION Risk of fire Do not replace the attachment plug It contains a safety device fuse that should not be removed Do not use the product if the attachment plug is damaged To avoid a risk of fire only replace with a 5 Amp 125 Volt fuse provided with the product To order a new fuse contact SI Products Service at 888 856 6781 PRODUCT DIAGRAM LLI L IIS gt go QZ Ss gt gt py J RN 0 2222 PM 2 Q Z 2 or 2 Xa x D x55 UO DUO 92 SeexXo2 T 5 oe 8S2 929 5500 SSc ESLL ZIS 6 0 5 5 oxe gooo co2o0tcoo cc 92cQ9 6 2ccolt BSR ETSBSOS 2 gt gt 2 lt 2 1 lt 0000 Tmoouwrsgr7S5YISZ0aAormnFE5SsS ASSEMBLY INSTRUCTIONS Tools required Phillips screwdriver not included 1 Remove the fan and packaging materials from the box Base Assembly 1 2 2 C2 2 2g gt 2 Unscrew the locking lever from the bottom of the pole Turn the pole upside down and slide the opening in the center of the fan base over the pole Place the black weight onto the base followed by the washer Insert the threaded end of the locking lever into the hole of the washer and through the base into the bottom of the stand Turn the locking lever clockwise to secure and tighten the base to the pole Turn the base ov
5. 18 INCHES OSCILLATING me STAND FAN SOLEUS OWNER S MANUAL Model FSM 45 TL i lb Intertek 3068664 PLEASE READ AND SAVE THESE INSTRUCTIONS 18 IN OSCILLATING STAND FAN Thank you for choosing a Soleus Air fan This owner s manual will provide you with valuable information necessary for the proper care and maintenance of your new product Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan For your own records please attach a copy of your sales receipt to this manual Also write the store name location and date purchased below Store Name Location Date Purchased WARNINGS When using this electric unit basic safety precautions should always be followed to reduce the risk of fire electric shock and personal injury including the following Read all instructions before using this unit 2 Use only for intended household use as described in this manual 3 Plug the fan directly into a 120 V A C electrical outlet 4 Never insert your fingers pencils or other objects through the fan grill during operation 5 fan should be used on a stable and level surface Do not operate without the grill being properly in place 6 Do not expose the fan to excessive heat or humidity This could cause damage to the electrical components 7 Donot immerse in any type of liquid Do not use near water
6. er and set it on the floor On the neck of the fan head remove the securing knob carriage bolt and adjustable tilt knob Loosen the range of motion screw Slide the fan head neck over the top of the pole so that the range of motion screw aligns with the range of motion hole Insert the carriage bolt into the square slot on the fan head neck and push through the hole Tighten the range of motion screw Screw on the securing knob and the adjustable tilt knob Fan Head Assembly 1 2 C2 Remove the black sleeve and mounting nut from the motor shaft Position the back grill over the motor shaft fitting the holes in the back grill over the knobs that protrude from the motor Make sure the rear grill fits securely against the motor housing and the handle is at the top Secure the back grill by screwing on the mounting nut Turn clockwise and tighten firmly Loosen the securing screw on the fan blade Slide the fan blade onto the mounting shaft with the shaft sleeve facing the motor Align securing screw with flat groove in the motor shaft and tighten with Phillips screwdriver Remove the small securing bolt from the bottom of the front grill Position front grill so logo is horizontal and make sure the grill clips are open Secure the top tab to the back grill Fasten the grills together with securing bolt Hold the front grill against the rear grill and snap the grill clips closed to complete the assembly OPERATING
7. ndling provisions in the instructions 3 Damage to the finish of the case or other appearance parts caused by wear 4 Damage caused by repairs or alterations of the unit by anyone other than those authorized by Soleus International Inc 5 Freight and Insurance cost for the warranty service ALL WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY ARE LIMITED TO A ONE YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY SOLEUS INTERNATIONAL INC DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT As some states do not allow the limitation or exclusion of incidental or consequential damages or do not allow limitation on implied warranties the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state For Warranty Technical Support Customer Service Missing or Defective Parts before returning to your retailer please call 888 876 5387 Or Write To Soleus International Inc 20035 E Walnut Drive North City of Industry CA 91789 USA www soleusair com
8. uring screw and remove the fan blade 2 The fan blade and grill may be cleaned with a damp cloth and mild detergent 3 Reassemble the fan after the parts have dried completely To do so replace the fan blade tighten the securing screw and secure the front grill Do not plug the fan into an electrical outlet until it is fully reassembled STORAGE When not in use store the fan in a cool dry location To prevent dust and dirt build up use the old packaging to repack the unit Printed in China WARRANTY One Year Limited Warranty Soleus International Inc warrants the accompanying Soleus Air FSM 45 to be free from defects in material and workmanship for the applications specified in its operation instruction for a period of ONE 1 year from the date of original retail purchase in the United States or Canada If the unit exhibits a defect in normal use Soleus International Inc will at its option either repair or replace it free of charge within a reasonable time after the unit is returned during the warranty period As acondition to any warranty service obligation the consumer must present this Warranty Certificate along with a copy of the original purchase invoice This Warranty Does Not Cover 1 Damage accidental or otherwise to the unit while in the possession of a consumer not caused by a defect in material or workmanship 2 Damage caused by consumer misuse tampering or failure to follow the care and special ha
Download Pdf Manuals
Related Search