Smeg DWF66SS Instruction Manual
Contents
1. U ER R NEZ a OS z EZ a 5 N MAD NAS Se EIA ERA LWW User instructions CUTLERY BASKET This varies in shape according to the model and features either a single compartment or separate compartments The cutlery should be arranged in an orderly manner inside the basket with the handles pointing downwards Take care during loading to avoid injury from the knife blades The basket is suitable for all types of cutlery except those long enough to interfere with the upper spray arm Ladles wooden spoons and cooking knives can be placed in the upper basket making sure that the knife blades do not protrude from the basket UPPER BASKET It is recommended to load the upper basket with small or medium sized items such as glasses small plates tea or coffee cups shallow bowls and light objects made from heat resistant plastic If the upper basket is used in the lowermost position it can also be loaded with serving dishes provided they are only slightly soiled With fixed metal cup rack To make the most of the space inside the basket certain models are equipped with two lift up plastic racks With mobile plastic cup rack in two sections 39 User instructions LOADING THE UPPER BASKET Load the dishes with the top side facing forwards cups and concave containers should always be loaded with the opening facing down The left side of the basket can be loaded with cups a2. THEN CALL INA QUALIFIED TECHNICIAN Safety instructions CGB DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT IF IN DOUBT CONSULT YOUR DEALER THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN THE APPLIANCE IS INTENDED FOR USE BY ADULTS DO NOT ALLOW CHILDREN TO COME NEAR OR PLAY WITH THE DISHWASHER KEEP CHILDREN AWAY FROM DETERGENTS AND FROM THE OPEN DISHWASHER DOOR THE PACKAGING MATERIALS PLASTIC BAGS POLYSTYRENE METAL BARS ETC MUST NOT BE LEFT WITHIN THE REACH OF CHILDREN KEEP CHILDREN AWAY FROM THE OPEN DISHWASHER THE APPLIANCE MAY CONTAIN RESIDUES OF DETERGENT WHICH CAN CAUSE IRREVERSIBLE DAMAGE TO THE EYES MOUTH AND THROAT AS WELL AS POSSIBLE DEATH BY SUFFOCATION DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION DO NOT LOAD DISHES THAT ARE SOILED WITH ASH WAX OR PAINTS LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY CAUSE THE APPLIANCE TO OVERTURN PUTING PEOPLE AT RISK DO NOT UNDER ANY CIRCUMSTANCES TOUCH THE HEATING ELEMENT IMMEDIATELY AFTER THE END OF A WASHING PROGRAM OVER TIME THE DISHWASHER HEATING ELEMENTS MAY CHANGE COLOUR IN PART OR OVERALL THIS IS PERFECTLY NORMAL AND DOES NOT IN ANY WAY AFFECT THE OPERATION OF THE APPLIANCE DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGR
3. which the start of the washing program is to be delayed This information automatically appears on the INFORMATION DISPLAY 4 as well Then proceed to select the program in the manner described previously the dishwasher will immediately perform a pre wash cycle and then automatically initiate the countdown of the delayed start programmed the INFORMATION DISPLAY 4 will show a blinking clock symbol and the time remaining to the start of the program TO SAVE ON ENERGY AND PROTECT THE ENVIRONMENT Always try to run the dishwasher fully loaded Do not wash the dishes in running water Use the washing program that is most appropriate for each type of load Do not carry out any preliminary rinsing If available connect the dishwasher to a hot water supply up to 60 C When possible disable the drying cycle and leave the door open at the end of the washing cycle the residual air and heat will dry the dishes perfectly TO CUT DOWN ON DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT The phosphates contained in dishwasher detergents are harmful to the environment To avoid using excessive amounts of detergent and to save on electricity observe the following e separate the more delicate items from dishes that are more resistant to aggressive detergents and high temperatures e donot pour the detergent directly on the dishes REMOVING THE DISHES At the end of the washing program wait at least 20 minutes before removing the dishe
4. DIAGNOSTICS SYSTEM FAULT DESCRIPTION The dishwasher s AQUASTOP anti flooding system has been activated only for models equipped with the device E1 To disable the AQUASTOP switch off the dishwasher and then switch it back on again The triggering of the AQUASTOP device indicates the presence of a water leak immediately after resetting the dishwasher it is therefore necessary to call the authorised After sales service centre The system for limiting the water level in the dishwasher has been triggered E2 To reset the appliance reprogram the wash by opening and closing the door and then pressing the START STOP 5 button again If the problem persists call the authorised technical service centre The dishwasher fails to heat the water E3 To reset the appliance open and close the door To determine the cause of this problem call the authorised technical service centre The dishwasher fails to draw water Check that e the water supply tap is open e the filter in the water intake hose is not clogged E5 e the water intake hose is not kinked or bent Turn the dishwasher off and then on again then press the START PAUSE 5 button again If the problem is resolved the washing program will resume from where it was halted If the fault persists call the authorised technical service centre The dishwasher fails to drain Check that e the flexible drain hose is not kinked or obstructed e the water drain pipe is not obstructed E6 e the dis
5. E5 e When a SUPER program is selected in addition to the normal dose of detergent it is necessary to add an additional amount inside compartment G or H e Use only detergents specially formulated for dishwashers For optimal washing results it is important to use a good quality detergent e The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results Once opened the detergent packs should not be kept for too long otherwise the detergent loses its effectiveness e Do not use detergents formulated for washing dishes by hand because they produce a great deal of foam and may negatively affect the operation of the dishwasher e Add the correct amount of detergent An insufficient amount of detergent will result in a partial removal of dirt from the dishes whereas an excessive amount is wasteful and does not improve the washing results e There are various types of detergents available on the market liquid powder and tablet forms characterised by different chemical compositions some contain phosphates whereas others are phosphate free and based on natural enzymes Detergents containing phosphates are more effective against grease and starch at temperatures above 60 C Enzyme detergents on the other hand are also effective at lower temperatures from 40 to 55 C and are more easily biode
6. again to enable to acoustic device the symbol bS appears e press the START STOP 5 button twice to exit the set up mode 3 3 Washing programs The dishwasher is equipped with a control panel and an INFORMATION DISPLAY described in chapter 3 Description of the controls from which it is possible to carry out all the power switch on switch off and programming operations See enclosed program table for washing cycles and the procedure for starting the dishwasher and switching it on off Before starting a washing program make sure that e The water supply tap is open The correct amount of detergent has been added to the dispenser The baskets have been correctly loaded The spray arms are able to rotate freely and without obstruction The dishwasher door is securely closed HALF LOAD FUNCTION This function is recommended for loads of up to 6 place settings and cuts down on the use of water and electricity It can be selected using the HALF LOAD 3 button and there are three different options 1 pressing the button just once selects the upper basket 2 pressing the button a second time selects the lower basket 3 pressing the button a third time reverts to the full load function After having selected the desired washing program in the usual manner choose one of the above three loading options on the INFORMATION DISPLAY 4 the indicator light corresponding to the selected basket will illuminate for 5 seconds after whi
7. and hook up Remove the polystyrene basket retainers Position the appliance in the desired place of installation The back or sides of the dishwasher may be placed up against walls or other furniture units If the dishwasher is installed near a heat source fit the special insulating panel to prevent overheating and malfunction of the appliance To ensure stability install integrated or built under dishwashers only under continuous worktops and screw them to the adjacent units To facilitate the installation procedure the intake and drain hoses can be positioned in any direction make sure that the hoses are not kinked crushed or pulled too tightly Level the appliance on the floor using its adjustable feet This operation is essential for ensuring correct operation of the dishwasher Some models are equipped with only one adjustable foot at the rear which can be adjusted by turning the screw on the lower front part of the appliance 2 1 Water supply connection 2 Preventing the risk of clogging or damage if the water pipe is new or has not been used for a nin long time before connecting to the water supply check that the water is clear and free of impurities o a to prevent damage to the appliance it er The dishwasher must always be connected to the water system with new hoses old or used hoses must never be reused CONNECTING TO THE WATER SUPPLY Connect the intake hose to a cold water supply with 3 4 gas thread i
8. AM AND BEFORE THE DRYING CYCLE AQUASTOP MODELS THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK WHEN THE AQUASTOP DEVICE IS TRIPPED CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE THERE IS A SOLENOID VALVE INSIDE THE WATER INTAKE HOSE DO NOT CUT THE HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO WATER IN THE EVENT OF DAMAGE TO THE WATER INTAKE HOSE DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY AND FROM THE WATER SUPPLY IMMEDIATELY AFTER INSTALLING THE DISHWASHER PERFORM A QUICK TEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW IF THE DISHWASHER FAILS TO OPERATE CORRECTLY DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE DO NOT ATTEMPT TO REPAIR THE APPLIANCE THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL EQUIPMENT ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A TRAINED AND AUTHORISED TECHNICIAN REPAIRS CARRIED OUT BY UNAUTHORISED PERSONS WILL INVALIDATE THE WARRANTY AS WELL AS POSING A POTENTIAL HAZARD TO THE USER The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions from tampering with even a single component of the appliance or from the use of non original spare parts 2 CGB Installation instructions 2 Installation
9. CE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION IF THE APPLIANCE IS NOT CONNECTED TO THE ELECTRICAL POWER SUPPLY BY MEANS OF A PLUG IT IS NECESSARY TO INSTALL AN ISOLATION SWITCH WITH A CONTACT OPENING GAP OF ATLEAST 3 MM THE PLUG ON THE POWER CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MUST CONFORM TO THE REGULATIONS IN FORCE CHECK THAT THE VOLTAGE AND FREQUENCY OF THE ELECTRICAL POWER SUPPLY MATCH THE RATINGS ON THE NAME PLATE AVOID USING ADAPTORS OR SHUNT CONNECTIONS NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD e AFTER INSTALLATION THE PLUG MUST REMAIN ACCESSIBLE e IN THE EVENT OF DAMAGE TO THE POWER CORD HAVE IT REPLACED BYA QUALIFIED TECHNICIAN IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT OBSTRUCTED ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN LOCKS DOORS ETC THE APPLIANCE MUST THEN BE TAKEN TO A SORTED WASTE COLLECTION CENTRE IN THE EVENT OF A FAULT DISCONNECT THE DISHWASHER FROM THE ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP
10. INSTRUCTION MANUAL DISHWASHER Contents 1 Safety and operating instructions 26 2 Installation and hook up 28 2 1 Water supply connection 28 2 2 Electrical connection 29 3 Description of the controls 30 3 1 Front panel 30 3 2 Information display 30 3 3 Washing programs 31 4 Operating instructions 33 4 1 Using the water softening system 33 4 2 Using the rinse aid and detergent dispensers 35 4 3 General warnings and recommendations 37 4 4 Using the baskets 38 5 Cleaning and maintenance 41 5 1 General warnings and recommendations 41 6 Troubleshooting SSI AA Thank you for choosing this product We advise you to carefully read all the instructions contained in this manual in order to understand how to operate your dishwasher safely and correctly The manual is divided into paragraphs which provide a step by step description of the dishwasher functions with clear instructions accompanied by detailed illustrations Recommendations are given for the correct use of the baskets spray arms containers filters washing programs and for operating the controls Follow the recommended cleaning procedures to ensure that your dishwasher always remains in perfect working order This manual provides a quick and easy reference for answering all your questions concerning the use of your new dishwasher INSTALLATION INSTRUCTIONS these are intended for the qualified technician who must carry out the installation hook up and test
11. PANS AWAITING COLD 1 NO 18 4 4 Ya COMPLETION OF THE LOAD Only run the soak program with half loads The HALF LOAD option 3 is available for all programs except the soak program Reference program as EN 50242 standard Not present 1 Average power consumption with the softener set on level 2 2 The cycle duration and power consumption may vary according to the water and room temperatures and the type and amount of dishes lf the dishwasher door is left open or is not properly closed the INFORMATION DISPLAY 4 will signal that the washing program cannot be started maintenance of the dishwasher read the enclosed manual carefully 77 For any other information about use and 19 510 0146 00 AAA User instructions CGB DISABLING THE END OF CYCLE ACOUSTIC DEVICE It is possible to disable the sounding of the start end of cycle acoustic device Proceed as follows e press down the HALF LOAD 3 button for a few seconds until the symbol bS appears on the INFORMATION DISPLAY 4 e press the HALF LOAD 3 button again to disable the acoustic device the symbol bN appears on the display e press the START STOP 5 button twice to exit the set up mode To re enable the acoustic device repeat the following procedure e press down the HALF LOAD 3 button for a few seconds until the bN symbol appears on the INFORMATION DISPLAY 4 e press the HALF LOAD 3 button
12. ch the cutlery can be inserted to keep the items far enough apart and allow optimal water passage TABLE OF PROGRAMS SETTING THE WASHING PROGRAM To select the most suitable washing program refer to the table below which indicates the recommended washing according to dish type and the degree of soiling After using the table to identify the most appropriate washing program turn the PROGRAM SELECTOR 7 knob until the symbol and number of the desired program appear on the INDICATOR DISC 6 and on the INFORMATION DISPLAY 4 PROGRAM SEQUENCE DURATION CONSUMPTION PROGRAM INDICATOR INFORMATION SAG DEGREE QUANTITY DISC DISPLAY OFSOILING DETERGENT PRE WASH WASH COLD HOT DRYING MINUTES WATER POWER RINSE RINSE 2 LITRES 1 Kwh 2 HEAVILY SOILED DISHES suer SC P8 IET 10 25 Hor 70 C 2 YES YES 135 17 1 45 N WITH DRIED ON RESIDUES NORMALLY SOILED DISHES a ECO ECO P7 POTS AND PANS 30 55 C 1 MESA ES 118 11 1 15 WITH DRIED ON RESIDUES SLIGHTLY SOILED DISHES ES P6 POTS AND PANS o y Saba BIO en 30 COLD 755 1 YES pyres 160 14 1 05 RESIDUES NORMALLY SOILED DISHES DAILY P5 Seats 30 65 C 1 MESA PYES 100 11 1 20 DRIED ON RESIDUES NORMALLY NORMAL P4 SOILED DISHES 30 COLD 65 C 1 Ves Ves 104 14 1 25 POTS AND PANS SLIGHTLY QUICK gt P3 SOILED DELICATE 25 45 C 2 NO 32 10 0 4 3 DISHES SLIGHTLY R DELICATE P2 SOILED 25 45 C 1 YES YES 718 10 0 9 X DISHES DISHES POTS AND SOAK aus P1
13. ch the INFORMATION DISPLAY 4 will revert to showing the selected program In order to check again the currently selected basket simply press the HALF LOAD 3 button once before starting the program lt is possible to place a cutlery basket inside the basket selected for the HALF LOAD program the other basket must remain empty WARNING do not load dishes and cutlery into the non selected basket because the water spray will only reach the selected basket 31 32 User instructions CANCELLING THE CURRENT PROGRAM To cancel the currently selected program press the START STOP 5 button for a few seconds until the active program appears on the INFORMATION DISPLAY 4 At this point to halt the program in progress simultaneously press the HALF LOAD 3 button and the START STOP 5 button The INFORMATION DISPLAY 4 will show the letter P followed by a dash P and the dishwasher will automatically advance to the end of cycle CHANGING THE PROGRAM To change the program press and hold down the START STOP 5 button for a few seconds then select the new program as described previously in the instructions press the START STOP 5 button again holding it down for a few seconds DELAYED START The start of the program can be delayed by 2 4 6 8 10 or 12 hours In this way it is possible to run the dishwasher when most convenient Turn the ON OFF 1 selector until appears on the INDICATOR DISC 2 the number of hours by
14. g the power cord back into the socket e Reconnect the water intake hose and open the tap again User instructions TROUBLESHOOTING MINOR PROBLEMS In some cases it is possible to remedy minor problems by referring to the following instructions If the program fails to start check that the dishwasher is connected to the electrical power supply there is no power failure the water tap is open the dishwasher door is properly closed If water remains inside the dishwasher check that e the drain hose is not kinked e the drain siphon is not obstructed e the dishwasher filters are not clogged If the dishes are not being cleaned properly check that the correct amount of detergent has been added there is regenerating salt inside the special container the dishes are being loaded correctly the selected program is suitable for the dish types and their degree of soiling all the filters are clean and positioned correctly the spray arm nozzles are not obstructed there is no object obstructing the rotation of the spray arms If the dishes fail to dry or remain dull check that e there is rinse aid inside the special container e the rinse aid dispenser setting is correct e the detergent used is of good quality and has not lost its effectiveness for example through incorrect storage with the box left open If the dishes show signs of streaking staining etc check that e the rinse aid dispenser set
15. gradable With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65 C using traditional detergents For the safeguarding of the environment we recommend the use of phosphate and chlorine free detergents The introduction of detergent into the rinse aid dispenser even in liquid form will damage the dishwasher 36 User instructions 4 3 General warnings and recommendations Before using the dishwasher for the first time it is advisable to read the following recommendations concerning dish types to be washed and their loading There are generally no constraints on the washing of domestic dishes but in certain cases it is necessary to take their characteristics into account Before loading the dishes into the baskets it is necessary to e remove coarse food remains e g bones fish bones etc which may clog the filter or damage the wash pump e soak any pots or pans with burnt on food remains on the bottom to facilitate removal then load them into the LOWER BASKET If washing only a small amount of dishes use the half load option to save on energy and water Remember to load only the basket selected for the half load program the other basket must remain empty There is no need to pre wash the dishes under running water before loading them into the baskets since this only wastes water Correct loading of the dishes helps ensure optimal washing
16. he spray arms turn freely Otherwise check that they have been installed correctly 41 GB User instructions CLEANING THE FILTER UNIT e It is advisable to periodically inspect the centre filter C and if necessary to clean it To remove the filter grip the tabs turn them anticlockwise and lift upwards e push the centre filter D from the underside to remove it from the micro filter e separate the two parts which make up the plastic filter by pressing the body of the filter in the zone shown by the arrows e remove the centre filter by lifting it upwards GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE e The filters should be cleaned under running water using a stiff brush e It is essential to thoroughly clean the filters according to the above instructions the dishwasher cannot function if the filters are clogged e Carefully replace the filters in their seats to avoid damaging the wash pump PROLONGED DISUSE e Run the soak program twice in succession e Unplug the power cord from the socket e Leave the door slightly open in order to prevent the formation of unpleasant odours inside the washing tank e Fill the rinse aid dispenser e Shut off the water supply tap BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE e Check that there are no deposits of sludge or rust inside the water pipe if there are allow the water to run from the water supply tap for a few minutes e Plu
17. hwasher filter is not clogged Turn the dishwasher off and then on again and then press the START STOP 5 button again If the problem is resolved the washing program will resume from where it was halted Otherwise if the fault persists call the authorised technical service centre In the event of error codes not included in this table call the Technical Service Centre User instructions CGB TECHNICAL DATA Width 597 599 mm Depth measured flush with the outer edge of Free standing 600 mm the control panel Semi integrated 590 mm Height Free standing from 850 mm to 870 mm Semi integrated from 820 mm to 870 mm Capacity Standard place settings Water supply pressure min 50 max 900 KPa min 0 5 max 9 bar Electrical characteristics See rating plate 45 Solosualcunimodelli Certainmodelsonly Seulementsurcertainsmodeles nurbeieinigeModellen S loenalgunosmodelos alleenindienvantoepassing Regolazionevitetensionemolle 12 Coperturafotocontappoindotazione 13 DoorspringAdjustementdevice 12 Coveringofholeusingcapprovided 13 Reglagedesressortsdelaporte 12 Couverturedutrouaveclebouchonfourni 13 Vorrichtungf rdieEinstellungderSpannungderT rfedem 12 AbdeckendesLochsmitdemmitgeliefertenStopfen 13
18. ing of the appliance USER INSTRUCTIONS these consist of recommendations for using the appliance a description of its controls and of the correct cleaning and maintenance procedures 25 8 26 Safety instructions 1 Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER BEFORE USING THE APPLIANCE CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN IN COMPLIANCE WITH THE REGULATIONS IN FORCE THIS APPLIANCE IS INTENDED FOR DOMESTIC USE AND COMPLIES WITH THE EEC DIRECTIVES 72 23 897336 INCLUDING 92 31 CURRENTLY IN FORCE INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE WASHING AND DRYING OF DISHES ANY OTHER USE SHALL BE CONSIDERED IMPROPER THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR USES OTHER THAN THOSE DESCRIBED ABOVE THE NAME PLATE FEATURING THE TECHNICAL DATA SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST NEVER BE REMOVED DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME SEPARATE THE VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDAN
19. nd glasses on two levels In the centre section plates and saucers can be loaded vertically into the supports provided Loading examples 27 gimme N 7 ITS 7 7 LE OD 4 BS SE Are AND AA D T_T Pee GN JA HA C AA Y Y IN EERO AN RSA EAR ASES ESA C Wy IK TB A eS 7 ARO Gh CSD ih nz SIZES D u hotkey JA IS D AD T b PR AD IM EFG LODOS tt J ADJUSTING THE UPPER BASKET The upper basket can be adjusted in two positions according to the user s needs and according to the height of the dishes in the lower basket Proceed as follows Pull out version e pull out the right hand basket guide e remove the stop first releasing it as shown in the diagram e push the guide to free the wheels e fit the upper or lower pair of wheels into the guide depending on the setting required e return the stop to its original position TIN SEA aA YA er Al d pu ese J we Wee lt ei nee qS HECK 4 f lt a DEI 7 NN i Af Push button version e pull out the basket to its limit position and pull the right side upwards At this point it is possible to load larger sized plates into the lower basket e To return to the original position pull out the upper basket again and press the release lever User instructions CGB 5 Cleaning and maintenance Before carrying out any work always disconnect the appliance from the electrical power supply 5 1 General warni
20. ngs and recommendations Avoid the use of acidic or abrasive detergents Clean the outer surfaces and door lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces Clean the door gaskets with a damp sponge Periodically once or twice a year it is advisable to clean the tank and gaskets using a soft cloth and water to remove any deposits CLEANING THE WATER INTAKE FILTER The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically After having closed the water supply tap unscrew the end of the water intake hose remove the filter A and clean it delicately under running water Reassemble filter A in its seat and carefully screw the water intake hose back into position CLEANING THE SPRAY ARMS The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging Wash them under running water and carefully replace them in their seats checking that their rotary movement is in no way impeded e Toremove the upper spray arm unscrew locking ring R e Toremove the lower spray arm simply lift it up pulling by the central part CLEANING THE ORBITAL VERSION SPRAY ARM To remove the ORBITAL spray arm assembly take hold of the longer arm and pull the ORBITAL unit upward Wash the arms under a jet of running water and return them carefully to their seat After reassembly check that t
21. nserting the filter A supplied with the dishwasher Take care to screw the hose firmly into place with your hands and then complete by tightening about 1 4 of a turn with pliers In dishwashers equipped with the ACQUASTOP device the filters is already fitted inside the threaded ring The dishwasher can also be connected to a hot water supply not exceeding 60 C Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes but slightly reduces its effectiveness Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply Installation instructions rr DRAIN CONNECTION NY Insert the dishwasher s drain hose into a drain pipe WES having a diameter of at least 4 cm or alternatively ma place it inside the kitchen sink using the plastic support SA w provided taking care not to crush or excessively bend N the hose It is important to prevent the hose from E gt coming loose and falling For this purpose the plastic E support is equipped with a hole for tying it to the wall or water tap The free end should be positioned at a height of between 30 and 100 cm and should never be submerged in water If a horizontal drain extension hose is used for a maximum of 3 m the drain hose can be placed at a maximum height of 85 cm from the ground MAX 100 cm min 30 cm 2 2 Electrical connection Plug the po
22. pes of glass and crystal may become dull and lose their clearness after many washings Therefore for these items we recommend using the least aggressive program available e Decorated items the decorated objects available on the market are generally able to withstand washing in the dishwasher although the colours may fade after a great many washes If in doubt as to the fastness of the colours it is advisable to wash just a few items at a time for approximately one month 37 38 User instructions 4 4 Using the baskets The dishwasher has a capacity of 12 place settings including serving dishes LOWER BASKET The lower basket receives the full force of the lower spray arm and should therefore be used for the toughest items with a heavier degree of soiling All types and combinations of loads are permitted provided that the dishes pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom Ill Et With fixed supports To make the most of the space inside the basket when loading large items certain models are equipped with tip up supports for plates in 2 or 4 sections With tip up supports LOADING THE LOWER BASKET Carefully load flat plates soup plates dessert and serving dishes positioning them vertically Pots pans and their covers must be loaded upside down When loading soup plates and dessert bowls be sure to leave a gap between them Loading examples
23. re etc and is also continually updated as the washing program progresses The INFORMATION DISPLAY 4 shows the estimated duration of the washing program if it exceeds 60 minutes the hours and minutes are displayed in alternation If it is necessary to open dishwasher door during the washing cycle there will be a 1 minute delay before the program can be resumed After correctly closing the door press the START STOP 5 button again This operation may negatively affective the progress of the washing cycle END OF CYCLE The end of the washing cycle is signalled by a brief sounding of an acoustic device and by the blinking of the selected program on the INFORMATION DISPLAY 4 Before setting a new washing program the door must first be opened then reclosed or the START STOP 5 button pressed to reset the display and stop the flashing TABLE FOR CERTIFICATION BODIES Reference standard Reference program Load Type of detergent Amount of detergent Rinse aid setting EN 50242 STANDARD LOADS EN 50242 Selector on P6 12 place settings B 30 g Depending on the model 3 4 or 4 6 Riy N ql iS SP SF rrj ee n AA mie TAI AN STE T QU A je y ie L E i ml Ir MENA y O a A Te O am TC UPPER BASKET WITH UPPER BASKET WITH METAL CUP RACK PLASTIC CUP RACK Depending on models the cutlery basket may have removable grilles in whi
24. results WARNING e Make sure that the dishes are securely in place so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle e Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump e Containers such as cups bowls glasses and pots should always be loaded with the opening facing downwards and with any cavities at an angle to allow the water to drain out e Do not stack dishes or place them in such a way that they cover one other e Do not place glasses too close together because they may knock against each other and break or there might be staining at the point where they touch MAKE SURE that the items being washed are dishwasher safe Items which are not dishwasher safe e Wooden dishes pots or pans these may be damaged by the high washing temperatures e Handcrafted items these are rarely suitable for washing in a dishwasher The relatively high water temperatures and the detergents used may damage them e Plastic dishes these are not heat resistant and may lose their shape Heat resistant plastic dishes must be washed in the upper basket Dishes and objects in copper tin zinc or brass these tend to stain Aluminium dishes items made from anodised aluminium may lose their colour Silverware silver items may Stain Glass and crystal in general glass and crystal objects can be washed in the dishwasher However certain ty
25. s to allow them to cool down To prevent any water droplets on the upper basket from falling on the dishes in the lower basket it is advisable to unload the lower basket first and then the upper basket S User instructions GB 4 Operating instructions Once the dishwasher has been correctly installed prepare for use as follows e Adjust the water softening system e Add the regenerating salt e Add the rinse aid and detergent 4 1 Using the water softening system The amount of scale contained in the water water hardness index can cause whitish staining on the dry dishes which et tend to become dull over time The dishwasher is equipped i with an automatic softening system which uses a special regenerating salt to reduce the hardness of the water The dishwasher is factory set for water hardness level 3 average hardness 41 60 dF 24 31 dH When using water of medium hardness the regenerating salt container should be refilled after approximately 20 washing cycles The salt container can hold approximately 1 7 Kg of salt in grains The container is situated at the bottom of the dishwasher After removing the lower basket unscrew the salt container cap by turning it anticlockwise and pour in the salt using the funnel supplied with the dishwasher Before replacing the cap remove any salt residues from around the opening e When using the dishwasher for the first time in addition to the salt it is also nece
26. ssary to add one litre of water to the container e Each time the salt container is refilled make sure that the cap is securely closed The mixture of water and detergent must never penetrate the salt container as this would compromise the operation of the regeneration system In the event of this occurring the warranty will be invalidated e Only use regenerating salt specially formulated for domestic dishwashers If using salt tablets do not fill the container completely e Do not use table salt as it contains insoluble substances which over time may damage the water softening system e When necessary refill the regenerating salt container before starting the washing program In this way the excess Saline solution will be immediately removed by the water the prolonged presence of salt water inside the tank may lead to corrosion Be careful not to confuse the salt and detergent packages adding detergent to the salt container will damage the water softening system 33 lt gt 34 User instructions ADJUSTING THE WATER SOFTENING SYSTEM The dishwasher is equipped with an electronic device for adjusting the water softening setting according to the hardness of the water To adjust the water softening setting proceed as follows e Press down the HALF LOAD 3 button for a few seconds until the bS symbol appears on the INFORMATION DISPLAY 4 e Press the START STOP 5 button to access the water softening settings
27. the current setting appears on the information display e Press the HALF LOAD 3 button again to select the desired hardness setting h1 h2 h5 Choose the value by referring to the Water hardness table e Press the START STOP 5 button to exit the set up mode WATER HARDNESS TABLE WATER HARDNESS German Degrees dH French Degrees dF SETTING oe 0 7 ho 5 15 8 25 h1 16 23 26 40 h2 24 31 41 60 h3 32 47 61 80 h4 48 58 81 100 hs Contact your local water board for information on the hardness of your water supply User instructions GB 4 2 Using the rinse aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door the detergent dispenser is on the left and the rinse aid dispenser is on the right With the exception of the SOAK program before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser The rinse aid on the other hand should only be added as required ADDING THE RINSE AID The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining it is automatically added to the water during the final rinse cycle from the container situated on the inner side of the door Open the door Rotate the container cap anticlockwise by 1 4 of a turn and remove it Add the rinse aid until the container is full approximately 140 cc The op
28. tical level indicator on the side of the cap should be completely obscured Refill the rinse aid when the optical level indicator becomes clear again or when the rinse aid warning light illuminates e Replace the cover and turn it in a clockwise direction e Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness However it possible to change the setting by turning the dispenser s selector to the desired position the amount of rinse aid dispensed is proportional to the selector position The setting must be increased when the washed dishes appear dull or have circular staining e To adjust the rinse aid setting rotate the dispenser cap through a quarter turn in an anticlockwise direction and remove it e Then use a screwdriver to rotate the rinse aid selector to the desired position e Replace the cap turning it clockwise e The amount of rinse aid must be increased if the washed dishes appear dull or feature circular Stains e If on the other hand the dishes are sticky or have white streaks it is necessary to reduce the rinse aid setting 35 GB User instructions ADDING THE DETERGENT To open the detergent dispenser cap lightly press the button P Add the detergent and close the cap carefully During the washing cycle the dispenser will be opened automatically EM al
29. ting is not too high lf there are visible traces of rust inside the tank e the tank is made of steel and therefore any rust marks are due to external elements fragments of rust from the water pipes pots cutlery etc Special products are commercially available to remove such marks e check that the amount of detergent being used is correct Certain detergents can be more corrosive than others e check that the cap of the salt container is securely closed and that the water softening setting is correct If after following the above troubleshooting instructions the problem persists call the nearest After Sales Centre WARNING any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user 43 vias GB User instructions 6 Troubleshooting The dishwasher is equipped with a self diagnostics system that is capable of detecting and signalling a number of possible faults In the event of a fault or malfunction before calling the After sales service centre we suggest that you first consult the troubleshooting guide below If the problem persists even after implementing the recommended solutions call the After sales service centre after having carried out the following e making a note of the message displayed by the self diagnostics system e unplug the power cord from the socket e shut off the water supply tap TABLE OF FAULTS DETECTED BY THE SELF
30. wer cord into a suitable electrical outlet according to the instructions given in chapter gt 1 Safety and operating instructions Y 29 30 User instructions 3 Description of the controls 3 1 Front panel All the dishwasher controls are grouped on the front panel ONO aR WON 3 2 ON OFF AND DELAYED START SELECTOR DELAYED START INDICATOR DISC HALF LOAD BUTTON INFORMATION DISPLAY START STOP BUTTON SELECTED PROGRAM INDICATOR DISC WASHING PROGRAM SELECTOR SWITCH RECESSED DOOR HANDLE Information display The dishwasher is equipped with a practical DISPLAY which provides information on the programmed dishwasher functions 1 2 999 g gt HALF LOAD INDICATOR LIGHT DELAYED START INDICATOR LIGHT CURRENT PROGRAM INFORMATION Remaining time indication and warnings for the most common problems RINSE AID WARNING LIGHT REGENERATING SALT WARNING LIGHT POWER SWITCH ON To switch on the dishwasher simply turn the ON OFF selector 1 until the letter appears on the INDICATOR DISC 2 STARTING THE DISHWASHER After correctly carrying out all the preceding operations to start the dishwasher simply press the START STOP 5 button for a few seconds until the start cycle acoustic device sounds The INFORMATION DISPLAY 4 will show the duration of the program in minutes The duration time is only approximate because it depends on the washing conditions quantity of dishes water temperatu
Download Pdf Manuals
Related Search