Silvercrest A16 User's Manual
Contents
1. Connect the appliance only to an electrical outlet protected by an FC protector switch RCD with a rated residual current not exceeding 30 mA Never touch the pump and the mains plug with wet hands Never place the pump into water Place the pump at least 60 cm away from the bath tub YA AI Under no circumstances should you open the housing of the appliance Should live connections be touched and or the electrical and mechanical construction changed there is a risk of receiving an electric shock 4 SLB 450 A1 Safety Interaction with batteries A WARNING SILVERCREST Danger from improper use For safe handling of batteries observe the following safety instructions Do not throw the batteries into a fire Never short circuit batteries Do not attempt to recharge batteries Regularly check the condition of the batteries Leaking battery acid can cause permanent damage to the appliance Special care should be taken when handling a damaged or leaking battery Danger from acid burns Wear protective gloves Store batteries in a place inaccessible to children When swallowed seek immediate medical attention Remove the batteries from the remote control if you do not intend to use the device for extended periods of time Basic Safety Instructions SLB 450 A1 For safe handling of the appliance observe the following safety information Before use check the appliance for visible external damage2. Do not put into operation a appliance that is damaged or has been dropped So as to avoid hazards should the mains power cable of the appliance become damaged it must be replaced by the manufacturer his customer service or by a qualified technician This appliance is not intended for use by individuals including children with restricted physical physiological or intellectual abilities or deficiences in experience and or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used Children should be supervised to ensure that they do not play with the appliance The appliance must be inaccessible to people in the bathtub Repairs should only be carried out by authorized specialist companies or by the customer service department Incompetent repairs can result in significant risks for the user In addition warranty claims become void SILVER CREST Appliance Components GB IE CY Bi A repair to the appliance during the warranty period may only be carried out by a customer service department authorized by the manufacturer otherwise no additional warranty claims can be considered for subsequent damages Bi Defective components may only be replaced with original replacement parts Only by using original replacement parts can you guarantee that the safety requirements are complied with Wi Protect the pump and the remote control against mois
3. and to the pump Moisten the suction caps on the air bubble mat and then press it firmly onto the bottom of the bath tub Remove the soap shampoo or hair remnants rinse the bath tub out before pressing the air bubble mat down After use allow the pump to cool for at least 10 minutes and first then restart it if still needed gt f you cannot solve the problem with the aforementioned methods please contact Customer Service SLB 450 A1 Storage Disposal SILVERCREST Storage Disposal Storage If you do not intend to use the appliance for a long time unplug it from the mains power socket remove the air hose and store it in a clean dry place away from direct sunlight Clean the air bubble mat and let it dry well Remove the battery from the remote control Disposal of the appliance Do not dispose of this appliance in your normal domestic waste This product is subject to the provisions of the European Directive 2002 96 EC WEEE Waste Electrical and Electronic Equipment Dispose of this appliance through an approved waste disposal centre or at your ENSE community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre Disposing of the batteries Do not dispose of the batteries with household waste Every consumer is statutorily obliged to dispose of batteries at a collection site of his community city district or at a retail store This obligatio
4. as a result of incorrect repairs SLB 450 A1 15 GB IE CY SILVERCREST Troubleshooting Malfunction causes and remedies Defect The following table will help with localising and eliminating minor malfunctions Possible cause The plug is not inserted Mains power socket does not supply any power Appliance does not switch on Appliance does not The remote control 9 was not directed at the appliance The battery in the remote control is empty The battery in the remote control is empty let itself be switched off Function button not pressed often enough Appliance not switched on There are no air bubbles exiting the air bubble mat Air bubble mat does Air hose not properly connected Suction cups of the air bubble mat are not clinging firmly to the floor of the bath not adhere to the floor of the bathtub Appliance stops automatically 16 Soap shampoo or hair remnants prevent firm suction to the bottom of the bath tub Cooling time after operation too short Solution Insert the plug into a mains power socket Check the fuses On activation aim the remote control at the pump Insert a new battery into the remote control Insert a new battery into the remote control Press the function button repeatedly until the appliance switches off Switch the appliance on Properly connect lock the air hose to the air bubble mat 9
5. assured The warranty covers only claims for material and maufacturing defects not for transport damages worn parts or for damage to fragile components e g buttons or batteries This product is for private use only and is not intended for commercial use If this product has been subjected to improper or inappropriate handling abuse or modifications not carried out by one of our authorised service centres the warranty will be considered void This warranty does not affect your statutory rights The warranty period is not extended by repairs effected under warranty This applies also to replaced and repaired parts Damages or defects discovered after purchase are to be reported directly after unpacking at the latest two days after the purchase date Repairs carried out after lapse of the warranty period are subject to charge Service DES UK LTD Tel 0871 5000 700 0 10 minute e mail support uk kompernass com CIE Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Standard call rates apply Mobile operators may vary e mail support ie kompernass com CD Kompernass Service Cyprus Tel 800 9 44 01 e mail support cy kompernass com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY WWW kompernass com SLB 450 A1 19
6. firmly secured to the bath bottom gt Check every time before getting into the bath tub whether the air bubble mat is still properly and firmly secured gt Do not climb into the bathtub before all the suction cups of the air bubble mat are properly secured in the bath tub SLB 450 A1 9 SILVER CREST Setting up and connecting GB Place the airbubble mat onto the bottom of your bath tub so that the IE connection support for the air hose 9 pointing upwards CY amp Press the air bubble mat with the flat of your hands until it is firmly secured onto the bath tub floor by its suction cups The suction cups of the airbubble mat attach themselves to the bottom of the bath tub much easier and more firmly if you first moisten them slightly before pressing Using aromatic oils Optionally you can use aromatic oils perfume or massage oils For this use the supplied aroma oil pad W Open the aroma oil pad Q9 Place a few drops of aromatic oil onto the cotton fleece Q and replace the fleece into the aroma oil pad Close the aroma oil pad Oo Place the aroma oil pad Q in the pump side connection support of the air hose 10 SLB 450 Al Setting up and connecting SILVER CREST Connecting the air hose First connect the air hose to the connection support ofthe pump With this ensure that the plastic cam aligns exactly with the recess in the connection support X Then tu
7. instructions 15 Cleaning the appliance 15 Troubleshooting 15 Safety instructions 15 Malfunction causes and remedies 16 Storage Disposal 17 Stord Eta beban has daan 17 Disposal of the appliance 17 Disposing of the batteries 17 Appendix 18 Notes on the EC Declaration of Conformity ers 18 Technical data 18 Waranty cepa vet ee 19 Service E ie REED 19 Importer ice ee eph n 19 SILVER CREST Introduction GB Introduction IE CY Information for these operating instructions These operating instructions are a component of the Spa Bath Mat SLB 450 A1 henceforth designated as the appliance and they provide you with important information about the intended use safety and connection as well as operation of the appliance The operating instructions must be constantly kept available close to the appliance It is to be read and used by anyone assigned to install service and repair faults in the appliance Keep these operating instructions and hand them over with the appliance to any future owners Copyright This documentation is copyright protected Any copying or reproduction including as extracts as well as the repetion of images also in an altered state is not permitted without the express written consent of the manufacturer Limited liability All technical information data and information for conn
8. SILVERCREST PERSONAL CARE 6 Spa Bath Mat SLB 450 A1 Spa Bath Mat E Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr SLB 450 A1 06 10 V3 SLB 450 A1 Index Introduction 2 Information for these operating instructions s se soba nar best betet 2 Copytight ess neca e dias ante 2 Limited liability 2 Intended Use 2 Wattilhgs eet rex Lam kanan gs em 3 Safety t dug Use Restrictions 4 Risk of electrocution 4 Interaction with batteries 5 Basic Safety Instructions 2 Appliance Components 6 Setting up and connecting 7 Safety instructions 7 Items supplied and transport inspections ee me eae qnd 7 Unpacking sie saree nade rers 7 Disposal of the packaging 8 Requirements on the Installation Location esee darth epp de 8 Electrical connections 9 Inserting batteries into the remote CORTO edan rr ed bade uo 9 Fixing the airbubble mat into the bath 9 Using aromatic oils 10 Connecting the air hose 11 Electrical connections 12 SLB 450 A1 SILVERCREST Handling and operation 12 Switching On and Off 12 FUNGON i i rece pres 13 Function selection on the pump 13 Function selection with the remote control ap aa sman c eee 14 Cleaning 15 Safety
9. ake contact with water whilst connected to the mains power supply there exists a potentially fatal risk Observe the following safety notices to avoid electrical hazards All parts containing electrical components except remote control devices should be located or secured so that they cannot fall into the bathtub Parts that are charged with standard mains power i e all parts except those supplied with the extra low safety voltage of up to 12 V MUST be inacces sible to people in the bath For a safe and errorfree operation of the appliance installation location must fulfill the following conditions Never place the pump above the bathtub Place the pump on a firm level and dry surface Place the pump in such a way that the suction opening under of the pump housing cannot be covered such as by a bath mat Do not place the pump in a wet environment or in a spraywater area Do not place the pump directly next to a radiator or a radiant heater The mains power socket must be protected by an FC protector switch RCD with a rated residual current not exceeding 30 mA It must be easily accessible so that the plug can be quickly removed in an emergency Secure the air bubble mat to the floor of your bathtub with the rear suction cups SLB 450 A1 Setting up and connecting SILVER CREST Electrical connections E Before you connect up compare the connection data voltage and frequency on the plate of the appliance w
10. ection and operation of the appliance contained in these operating instructions correspond to the latest available at the time of printing and to the best of our knowledge take into account our previous experience and know how No claims can be derived from the details illustrations and descriptions in these instructions The manufacturer assumes no responsibility for damage caused by failure to observe the instructions improper use inappropriate repairs making unauthorized changes or for using unapproved replacement parts Intended use This appliance is intended only for use in the production of air bubbles in baths for the purpose of Wellness massages in enclosed spaces and for domestic use This appliance is not intended for any other use or for uses beyond those mentioned Claims of any kind due to damage caused by improper use incompetent repairs unauthorized modifications or the use of non approved spare parts are excluded The operator alone bears liability 2 SLB 450 A1 Introduction SILVERCREST Warnings In the existing operation instructions the following warnings are used A warning at this danger level indicates a threateningly dangerous situation If the dangerous situation is not avoided it could result in death or serious injury gt Follow the instructions given in this warning notice to avoid the risks of death or serious injury to people A WARNING A warning at this danger level signifies a pot
11. entially dangerous situation If the dangerous situation is not avoided it can lead to injuries gt The directives in this warning are there to avoid personal injuries IMPORTANT A warning of this danger level signifies possible property damage If the situation is not avoided it can lead to property damage gt The directives in this warning are there to avoid property damage NOTICE gt A notice signifies additional information that assists in the handling of the appliance SLB 450 A1 3 SILVERCREST Safety GB Safety IE CY In this chapter you receive important safety information regarding handling of the appliance This appliance complies with the statutory safety regulations Incorrect usage can however lead to personal injury and property damage Use Restrictions Do not use the appliance E if you have high blood pressure Bi if you have cardiovascular diseases E if you are pregnant NOTICE gt If you have an illness check with your doctor on the possible application of it before using the appliance Children may use the appliance only under adult supervision Risk of electrocution Risk of fatal electrocution Contact with wires or components carrying mains power could be potentially fatal Observe the following safety notices to avoid electrical hazards gt Do not operate the appliance if the power cable or the plug are damaged gt Never set the appliance up above the bathtub gt
12. iance is delivered with the following components as standard Electric pump with mains power cable Remote control including battery 3V Type CR 2032 9 Air hose Air bubble mat 3 Aromati oil pads and cotton fleece Operating Instructions gt Check the items supplied to ensure everything is available and it is free from visible damage gt Ifthe contents are not complete or are damaged due to defective packaging or through transportation contact the service hotline see chapter Service Unpacking Remove all parts of the appliance and the operating instructions from the box Remove all packing material SLB 450 Al 7 SILVER CREST Setting up and connecting GB Disposal of the packaging IE CY The packaging protects the appliance from transport damage The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable OY The recirculation of packaging into the material circuit saves on raw material Q9 and reduces generated waste Dispose of packaging material that is no longer needed according to the regionally established regulations NOTICE gt If possible preserve the appliance s original packaging during the warranty period so that in the case of a warranty claim you can package the appliance properly for return Requirements on the Installation Location Risk of fatal electrocution Should the appliance m
13. ight The bathroom temperature should not be lower than 25 C Switching On and Off Switch the pump Q on with one press of the function button onthe pump Switch the pump Q off with several presses of the function button onthe pump 12 SLB 450 Al Handling and operation SILVERCREST NOTICE gt In the same way the pump may be switched on or off using the remote control by pressing the function button Functions The appliance offers three different operating modes E Continuous with low intensity BW Continuous with high intensity E Massage operation IMPORTANT Risk of damage to the appliance from excessive continuous operation Excessive continuous operation may cause an overheating of the pump gt The appliance switches off after 20 minutes usage time gt Allow the pump to cool down for 10 minutes after the normal period of use before switching it back on Function selection on the pump Switch the pump on with one press of the function button The LED operation indicator blinks green and the pump is operating at the lowest level of intensity By once again pressing the function button the LED operation indicator 5 blinks red and the pump switches to the high intensity level By pressing the function button once again the appliance switches into the programme mode The LED operation indicator amp blinks orange and the appliance is now working in the massage mode With th
14. is the appliance works by alternating between the low and high intensity levels Press the function button a fourth time to switch the appliance off The LED operation indicator e extinguishes gt The appliance switches off automatically after 20 minutes usage time SLB 450 A1 13 GB IE CY SILVERCREST 14 Handling and operation Function selection with the remote control IMPORTANT Risk of damage from water intrusion Never submerge the appliance or the remote control in water or other fluids The appliance or the remote control could be irreparably damaged Using the suction cups on the back of it attach the remote control onto the tiles next to your bath tub gt To ensure faultfree operation of the remote control i must be held during operation so that it points directly to the pump 9 Switch the pump on with one press of the function button The LED operation indicator onthe pump blinks green and the pump is operating at the lowest level of intensity By once again pressing the function button the LED operation indicator e on the pump blinks red and the pump switches to the high intensity level By pressing the function button once again the appliance switches into the programme mode The LED operation indicator O on the pump blinks orange and the appliance is now working in the massage mode With this the appliance works by alternating between the low and high inte
15. ith that of your electrical network This data must match in order to avoid damage to the appliance E Check to ensure that the power cable of the appliance is undamaged and it will not be laid over hot surfaces and or sharp edges Bi Make sure that the power cable is not over taut or folded E Do not let the power cable hang over edges trip wire effect Inserting batteries into the remote control gt The supplied battery 3V type CR 2032 has already been fitted into the remote control at the factory Before use remove the insulation strip from the battery compartment To insert a new battery proceed as follows Open the battery compartment at the rear of the remote control o by rotating the circular cover in the direction of the symbol gf Use a small coin for turning it Insert a battery of the type CR 2032 3V into the battery compartment Make sure the polarities are correct the positive pole faces up Close the battery compartment by replacing the round cover and turning it in the direction of the symbol until it is firmly seated back in the housing Fixing the air bubble mat into the bath Slippery If the air bubble mat is not fixed into the bathtub properly there is a great risk of slipping Observe the following safety information to avoid the risks of slipping gt Carefully press the air bubble mat onto the bottom of the bath tub until all of the suction cups on the air bubble mat are
16. n is intended to ensure that batteries are disposed of in an environmentally safe fashion Only dispose of batteries when they are fully discharged SLB 450 A1 17 SILVERCREST P Appendix CY Notes on the EC Declaration of Conformity This device complies in regards to conformance with the basic requirements and other relevent regulations with the EMC Directive 2004 108 EC as well as the Directive for Low Voltage Devices 2006 95 EC The complete original declaration of conformity can be obtained from the importer Technical data Model Operating voltage Power consumption Remote control battery Operating temperature Humidity no condensation Measurements W x B x D Pump Air bubble mat Weight Pump Air bubble mat Protection class Protection type Automatic switch off time Cooling time 18 SLB 450 Al 220 240 V 50 Hz 450 W 3 V Type CR 2032 Lithium Battery 5 45 SG 5 90 2555x172 cm 0S OPI cm approx 1 440 g approx 720 g n IP45 after 20 minutes min 10 minutes Appendix SILVERCREST Warranty GB IE CY With this appliance you receive a warranty of 3 years from the date of purchase This appliance has been manufactured with care and thoroughly tested before delivery Please retain your receipt as proof of purchase In the case of a warranty claim please make contact by telephone with our service department Only in this way can a post free despatch for your goods be
17. nsity levels Press the function button a fourth time to switch the appliance off The LED operation indicator on the pump extinguishes gt The appliance switches off automatically after 20 minutes usage time SLB 450 A1 Cleaning Troubleshooting SILVER CREST Cleaning Safety instructions Risk of fatal electrocution gt Remove the plug from the mains power socket before beginning to clean the appliance IMPORTANT Damage to the appliance gt In order to avoid irreparable damage to the appliance ensure that no moisture can permeate into the pump housing when you are cleaning it Cleaning the appliance Bi Clean the surfaces of the pump housing only with a soft dry cloth E Clean the air bubble mat with water and a soft sponge Bi Clean the air hose only with water Then let it dry well gt To take the air bubble mat out of the bath tub gently grasp under the individual suction cups with a fingernail to neutralise the vacuum effect Troubleshooting In this chapter you will receive important information for malfunction localisation and remedies Observe the instructions in order to avoid danger and damage Safety instructions A WARNING Observe the following safety information to avoid danger and property damage gt Repairs to electronic devices may only be carried out by specialists who have been trained by the manufacturer Considerable danger to the consumer and damage to the device can occur
18. rn the hose connector of the air hose to the left in the direction of the symbol until the hose connector is clamped in the connecting support ofthe pump Afterwards insert the hose fitting on the other side of the air hose e firmly into the connection support of the air bubble mat 9 _ lt LL SLB 450 A1 11 SILVERCREST Handling and operation GB Electrical connections IE cy paneer OO O 0 Risk of fatal electrocution Contact with wires or components carrying mains power could be potentially fatal Observe the following safety notices to avoid risks from electrical hazards gt Do not operate the appliance if the power cable or the plug are damaged gt Connect the appliance only to an electrical outlet protected by an FC protector switch RCD with a rated residual current not exceeding 30 mA Never touch the pump and the mains plug with wet hands Avoid water contact with the pump Place the pump at least 60 cm away from the bath tub Na y y Under no circumstances should you open the housing of the appliance Should live connections be touched and or the electrical and mechanical construction changed there is a risk of receiving an electric shock Insert the plug into a mains power socket Handling and operation In this chapter you receive important information for the handling and operation of the appliance gt Before using the equipment make sure the room temperature is r
19. ture and the penetration by liquids Never submerge the pump or the remote control in water never place the pump in the close vicinity of water and do not place any objects filled with liquids such as vases on the appliance Do not place any objects on the appliance Do not operate the appliance close to open flames e g candles Avoid direct solar radiation Always remove the power cable from the mains power socket with the plug not with the cable In the cases of a defect occurring or a thunderstorm approaching remove the plug from the mains power socket Appliance Components 6806800 99090092 Electric pump Connection supports for the air hose pump side Function button Pump Mains power cable LED operation indicator Air bubble mat Connection supports for the air hose air bubble mat side Air hose Remote control Function button Remote control Aromatic oil pad Cotton fleece SLB 450 A1 Setting up and connecting SILVER CREST Setting up and connecting Safety instructions A WARNING Damage to people and property may occur when operating the appliance Observe the following safety information to avoid any risks gt Packaging material should not be used as a play thing There is a risk of suffocation gt To avoid damage to persons and property pay heed to the requirements for the installation site and for the electrical connection Items supplied and transport inspection The appl
Download Pdf Manuals
Related Search