Home

Silvercrest A16 User's Manual

image

Contents

1. gt le You receive a 3 year warranty for this appliance as of the purchase date The appliance has been manu factured with care and meticulously examined before delivery Please retain your receipt as proof of purchase In the case of a warranty claim please make contact by telephone with our Service Department Only in this way can a post free despatch for your goods be assured gt The warranty is valid only for material or manufacturing defects not however for transport damage wear and tear or for damage to breakable parts i e switches or rechargeable batteries This product is for private use only and is not intended for commercial applications The warranty becomes void in the event of abusive and improper handling use of force and internal tampering not carried out by our authorised service branch Your statutory rights are not restricted in any way by this warranty The warranty period will not be extended as a result of repairs made under warranty This applies also to replacement and repaired parts Damages and defects potentially present at the time of purchase must be reported immediately after unpacking or at the very least two days after the date of purchase Repairs carried out after expiry of the warranty period are subject to payment Service DES UK LTD Tel 0871 5000 700 0 10 minute e mail support uk kompernass com CE Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Stan
2. Notes on the EC Declaration of Conformity 17 Oya Cen Oa bab sasusooue Y Warrenty Pate ect state Gee ee eect es eee a 18 DENVICE ss edt ee wterd ees nay eens 18 Setup oo coo cco n0c00nDDa0D000000000 YF Importer mawaa ae Wey ede Sede aria cid seh Geog vey 0 Vere Ye ore a E E 18 Individual parts of the electric fireplace 8 Screws and assembly material 9 SEKU 2000 Al 1 SILVER CREST Introduction a Introduction IE Information for these operating instructions These operating instructions are a component of the SEKU 2000 A1 Electric Fireplace henceforth designated as the appliance and they provide you with important information about the intended use safety installation and connection as well as operation of the appliance These operating instructions must at all times be kept available close to the appliance They are to be read and applied by everyone assigned fo install service and repair faults in the appliance Keep these operating instructions and hand them over with the appliance to any future owners Copyright This documentation is copyright protected Any copying or reproduction of this handbook including extracts as well as the rendering of any images even in an altered state is permitted only with the written consent of the manufacturer Limited liability All technical information data and instructions for installation connection and operation contained in these operating instruction
3. following safety information to avoid these fire risks gt Keep inflammable materials well away from the place of installation of the appliance gt Prevent the physical contact of combustible materials e g textiles with the appliance gt Do not cover the warm air outlet openings of the appliance Before the first use m Remove all packaging materials and transport restraints from the appliance gt When you first use it it may temporarily generate a light odour This is normal and completely harmless Electrical connection For a safe and correct operation of the appliance take note of the following instructions regarding the electrical connection E Before you connect the appliance compare the connection data voltage and frequency on the plate with that of your electricity supplier This data must tally in order to avoid damage to the appliance m Ensure that the power cable is undamaged and that it is not placed over hot surfaces and or sharp edges E The connecting cable must not be taut SEKU 2000 Al Operating components SILVERCREST Operating components gt The operating elements are on the front of the appliance above right and behind the ventilation grille gt To operate them fold the ventilation grille forward TEMPERATURE ON OFF switch Flames ON OFF switch Heating level 1 ON OFF switch Heating level 2 Temperature control Thermostat Dimme
4. that the arrow on the adaptor sleeves points to the outer edge of the side panel 0 l 0 AA 0 amp t 1 o o e D H 2 0 l B e Then bring the front panel and side panel together at right angles so that the locking pins enter the holes on the left edge of the side panel When done screw all three adapter sleeves to the right with the screwdriver until the locking pins are clamped into the adapter sleeves and the panels are seated firmly together and at right angles Step 2 Screw three single locking pins with a screwdriver into the prepared holes on the right front panel Place two wood plugs into the holes of the front panel Insert three adapter sleeves into the three large holes of the right side panel Thereby with the screwdriver line up the adaptor sleeves so that the arrow on the adaptor sleeves points to the outer edge of the side panel o ob pe j a 3 3 gan Olo oo am X o ae 10 SEKU 2000 Al Assembly SILVERCREST Then bring the front panel and side panel together at right angles so that the locking pins enter the holes on the right edge of the side panel e 5 IE When done screw all three adapter sleeves to the right with the screwdriver until the locking pins are clamped into the adapter sleeves and the panels are seated firmly together and at right angles Ste
5. SILVERCREST 6d Electric Fireplace SEKU 2000 A1 Electric Fireplace Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr SEKU 2000 A1 05 10 V3 SILVERCREST Contents Introduction esee eee eeo eee eee 2 Assembly eee eee eea 10 Information for these operating instructions 2 E E A o a E T Copyright o sackodiien tes caidas ewdwieiacs 2 Skak i d off 14 Limited liability 0 000 0000 e eee e cece ee 2 A teaser ea pmagenn ieion ee Warnings eel A Laie Rar isha Rares Ry SE Te la oe ie en Rw eae Se 3 Maintenance ccccccscsceee 14 Intended US 0 0 25 Soo eee wegen eee 3 Changing the light bulbs cc 0s0004 08 14 Safery elec e a cre siorete sta sieleieter nares ee Cleaning si swe eee te tO Risk of electrocution o n annann annann 4 Troubleshooting EE E E Basic Safety Instructions o oo oaaae 4 Malfunction causes and remedies 16 Seiing plane conne Mingine a Storage Disposal 16 Safety Notices 525 64 ochineeveriecdassccd 5 DIOLAGE crs Ee r E E N e 16 Items supplied and delivery checks 5 f i Disposal of the appliance 2 4 16 Disposal of the packaging 5 Installation requirements naana anaa 6 Appendix e Ue Before the first use n n nonan nananana 6 Technical daid sssr te srrerereroseniresi 17 Electrical connection 0 00000 0e 6
6. d living spaces In addition artificial fire flares can be created with the appliance to optically replicate an open hearth fire This appliance is not intended for any other use or for uses other than those mentioned A WARNING Risks from unintended use Risks can be created by the appliance if it used for unintended purposes and or for other applications gt Use the appliance exclusively for its intended purposes gt Observe the procedures described in these operating instructions Claims of any kind for damage resulting from unintended use will not be accepted The operator alone bears the liability SEKU 2000 Al 3 SILVERCREST Safety Safety In this chapter you are being given important safety information regarding the handling of the appliance This appliance complies with the statutory safety regulations Incorrect usage can however lead to personal and property damage Do not cover the appliance Covering the appliance can cause overheating and thus lead to the development of a fire Risk of electrocution Risk of electrocution A potentially fatal situation can arise from contact with live wires or components Pay heed to the following precautions to avoid the risk of electric shock gt Do not use the appliance if the mains power plug or the connecting cable are damaged gt Before continuing to use the appliance arrange for the connecting cable to be replaced by authorised qualified person
7. d risks and damage A WARNING Observe the following safety information to avoid risks and property damage gt Repairs to electrical appliances may only be carried out by specialists who have been trained by the manufacturer Considerable risk for the user and damage to the appliance can occur as a result of incorrect repairs SEKU 2000 Al 15 SILVER CREST gt IE Defect The flame replication does not light up The appliance does not heat The fan does not run The heating is not switched off Troubleshooting Storage Disposal Malfunction causes and remedies Possible cause The appliance is not switched on The plug is not inserted The mains power socket does not supply voltage The bulbs are defect Switch is not turned on Switch is not turned on Switch is not turned on Heating level control defective Switch is not turned on Switch is not turned on Fan defect Thermostat falsely adjusted Temperature control defect The following table will help with localising and remedying minor malfunctions Solution Switch the appliance on Insert the plug into the mains power socket Check the fuses Replace the defective bulbs Switch on Switch on Switch on Inform Customer Services Switch on Switch on Inform Customer Services Set the thermostat at the required temperature Inform Customer Services gt If you cann
8. dard call rates apply Mobile operators may vary e mail support ie kompernass com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www kompernass com 18 SEKU 2000 Al
9. er cable and do not lay it tautly gt Do not run the power cable over sharp edges SEKU 2000 Al 13 SILVER CREST Handling and operation Maintenance ap Handling and operation IE gt See also Operating Elements on page 7 In this chapter you receive important information for the handling and operation of the appliance Activate the ON OFF switch to turn the unit on The flame replication lights up Programme in the desired brightness with the Dimmer Then turn the heater on with the switch the built in fan starts to run and the heater is working at level 1 1000 W Activate the additional switch the heating is now working at level 2 2000 W Using the thermostat you can set it to the desired temperature The heat settings switch themselves off after reaching the set temperature range and switch back on when it becomes cooler Switching the appliance on and off Activate the ON OFF switch to turn the appliance on Activate the ON OFF switch once again to turn the appliance off Maintenance The maintenance of the appliance is limited to occasional external cleaning gt Keep the appliance and in particular the ventilation grille free from dust and dirt Changing the light bulbs Risk of electrocution Contact with electricity can be fatal Pay heed to the following safety information to avoid the risks of injury gt Switch the appliance off gt Before changing
10. ing or transportation contact the Service Hotline see warranty card Disposal of the packaging The packaging protects the appliance from transport damage The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable ex Dispose of packaging material that is no longer needed according to the regionally established regulations gt If possible preserve the appliance s original packaging during the warranty period so that in the case of a warranty claim you can package the appliance properly for return ae The recirculation of packaging into the material circuit saves on raw material and reduces generated waste SEKU 2000 Al 5 SILVER CREST Setting up and connecting Installation requirements For the safe and correct operation of the appliance the installation site must satisfy the following requirements E The appliance must be placed on a firm flat and horizontal surface E Do not place the appliance in a hot wet or very humid environment or close to inflammable materials m The mains power socket must be easily accessible at all times thus enabling the plug to be immediately withdrawn should an emergency situation arise m Ambient temperature range 5 to 45 C m Humidity No condensation 5 90 Fire hazard due to material contact If the heater makes contact with flammable materials there is a risk of fire Pay heed to the
11. ks on the floor plate For this use 8 screws of the type 2 screws per connection block Step 6 Take the top covering panel and place it on the preassembled unit Secure the top covering panel from the inner side of the unit with 7 screws of the type 12 SEKU 2000 Al Assembly SILVERCREST Step 7 Take the base plate and insert 4 wood plugs into the holes of the plate underside Then place the base plate on the floor plate so that the four wood plugs fit into the four holes in the floor plate Rear view Front View 4 oO o e O mm YO OU ve a Installing the appliance in the fire surround To finalise install the appliance in the assembled fire surround Place the appliance carefully on the base plate from the rear of the fire surround and then push it gently forward as far as it will go into the opening of the fire surround Secure the appliance to the fire surround at the edges with the fixing devices and the screws 6x 25mm Insert the plug into the mains power socket amp ei U A WARNING Improper laying of the power cable can cause damage to people and property Pay heed to the following safety information to avoid these risks gt Do not bend or clamp the pow
12. ng original replacement parts can it be guaranteed that the safety requirements are being complied with E Protect the appliance from moisture and liquid penetration m Always pull on the plug when disconnecting from the mains power socket never pull on the connection cable m Do not use the appliance adjacent to open flames E f malfunctions occur or thunder storms threaten remove the plug from the mains power socket m Never subject the appliance to spray and or dripwater do not place any objects filled with liquid i e vases or filled drink glasses on or next to the appliance Setting up and connecting Safety Notices A WARNING During commissioning of the appliance damage may occur to persons and property Pay heed to the following safety information to avoid these risks gt Packaging material should not be used as a play thing There is a risk of suffocation gt Comply with the notices in regard to the requirements for the installation site and for the electrical connection to avoid risks for people and property Items supplied and delivery checks The appliance is delivered with the following components as standard e Electric Fireplace e Lightbulbs 2 x E14 max 25 W preinstalled e Fireplace panelling including assembly material e Operating instructions gt Check the contents to make sure everything is there and for visible damage gt If the contents are incomplete or are damaged due to defective packag
13. ot solve the problem with the aforementioned methods please contact Customer Services Storage Disposal Storage Disconnect the plug if you are not intending to use the appliance for a long period Store the appliance at a dry locality Disposal of the appliance Do not dispose of the apliance in your normal domestic waste This product is subject to the provisions of European Directive 2002 96 EC WEEE Waste Electrical and Electronic Equipment Dispose of the appliance through an approved disposal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre 16 SEKU 2000 Al Appendix SILVERCREST Appendix Technical data General Input voltage 220 240 V Mains frequency 50 Hz Power consumption Heating level 1 1000 W Heating level 2 2000 W Bulb 2 x Bulbs E14 a id Ambient temperature 5 to 45 C Humidity no condensation 5 to 90 Measurements W x H x D 100 x 100 x 39 cm Weight approx 45 kg Notes on the EC Declaration of Conformity This appliance complies with in regard to conformance to the basic requirements and other relevent regulations the European Directive Low Voltage Directive 2006 95 EC as well as the European Directive for Electromagnetic Compatibility 2004 108 EC The complete original declaration of conformity can be obtained from the importer SEKU 2000 Al 17 SILVERCREST Appendix Warranty
14. p 3 Take the centre front panel and lay it face down Then place four adapter sleeves in the four large holes Turn the adapter sleeves with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the centre front panel Insert four double locking pins in the upper holes on the front sides of the panel and turn the adapter sleeves with the screwdriver to the right until the locking pins are firmly secured Step 4 Now connect the so prepared centre front panel with the side panels prepared in steps 1 and 2 For this insert two adapter sleeves in the large holes in the side panels Turn the adapter sleeves with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side panels Then guide each of the double locking pins of the centre front panel into the corresponding holes in the edges of the side panels When done turn all four adapter sleeves in the centre front panel with the screwdriver to the right until all parts are at right angles to each other and firmly tightened J oO SEKU 2000 Al 11 SILVERCREST Assembly Step 5 Place the floor plate on the floor Now take the previously assembled unit and carefully place it on the floor plate as shown in the following diagramme Then screw together the assembled unit with the connection bloc
15. r for flame lamps SEKU 2000 Al 7 SILVER CREST Set up Set up gt IE Before the appliance can be set up the fire surround must be assembled NOTICE gt Check the contents to make sure everything is there and for visible damage gt Firstly become familiar with all parts involved in the assembly Individual parts of the electric fireplace left side panel left front panel top covering panel right front panel centre front panel Base plate Floor plate right side panel 8 SEKU 2000 Al Set up SILVERCREST Screws and assembly material o woas SSCSC wdSCi Snglelocingpn SSCid C Adapter sleeve gt You require a screwdriver for the assembly this is not supplied The assembly of the fire surround is described in detail in the following gt Carry out the assembly step by step in the order as described SEKU 2000 Al 9 SILVERCREST Assembly Assembly Step 1 Screw three single locking pins with a screwdriver into the prepared holes on the left front panel Place two wood plugs into the holes of the front panel Insert three adapter sleeves into the three large holes of the left side panel Thereby with the screwdriver line up the adaptor sleeves so
16. s gt Do not under any circumstances open the appliance housing There is the risk of receiving an electric shock if the power carrying connections are touched and or the electrical and mechanical construction is changed Basic Safety Instructions For safe handling of the appliance observe the following safety information E Before use check the appliance for visible external damage Do not put into operation a appliance that is damaged or has been dropped m Arrange for damaged cables or connections to be replaced by authorized qualified persons or by the Customer Service department m Persons who due to their physical intellectual or motor abilities are incapable of operating the appliance safely may only use the appliance under supervision or direction from a responsible person Only permit children to use the appliance under supervision E Repairs should only be carried out by authorized specialist companies or by the customer service department Incorrect repairs can result in significant dangers for the user In addition warranty claims become void m During the warranty period repairs to the appliance may only be carried out by a Customer Service department authorised by the manufacturer if they are not no additional warranty claims can be considered for subsequent damages 4 SEKU 2000 Al Setting up and connecting SILVERCREST m Defective components may only be replaced with original replacement parts Only by usi
17. s correspond to the status at the time of printing and to the best of our knowledge take into account our previous experience and know how No claims can be derived from the details illustrations and descriptions in these instructions The manufacturer assumes no liability for damage caused by failure to observe these instructions improper use inappropriate repairs making unauthorized modifications or for using unapproved replacement parts SEKU 2000 Al Introduction SILVERCREST Warnings In these operating instructions the following warnings are used A warning at this danger level indicates a threateningly dangerous situation If the dangerous situation is not avoided it could result in death or serious injury gt Compliance with the instructions in this warning is necessary to avoid the risk of death or serious injury WARNING A warning at this danger level indicates a potentially dangerous situation If the dangerous situation is not avoided it can lead to injuries gt The directives in this warning are there to avoid personal injuries IMPORTANT A warning of this danger level signifies possible property damage If the situation is not avoided it can lead to property damage gt The directives in this warning are there to avoid property damage gt A notice signifies additional information that assists in the handling of the appliance Intended use This appliance is intended for the heating of enclose
18. the bulb unplug the appliance from the mains power source A WARNING Risk of injury from sharp edges When reaching in through the housing opening there is a risk of injury from the sharp edges on sheet metal housing and the reflector mirrors Pay heed to the following safety information to avoid these risks gt Do not touch the edges of the housing and the reflector mirror gt Wear protective gloves if necessary 14 SEKU 2000 Al Maintenance Cleaning Troubleshooting SILVERCREST Switch the appliance off Pull the plug from the mains power socket Loosen the four screws on the rear panel and remove the metal ventilation panel Carefully replace the defective bulb in the light shaft Screw the metal ventilation panel back onto the appliance rear Cleaning A WARNING Observe the following safety information to avoid risks and property damage gt Clean the appliance ONLY when it is switched off and cold IMPORTANT Possible damage to the appliance Penetrating moisture can cause damage to the appliance gt In order to avoid irreparable damage when you are cleaning the appliance ensure that moisture cannot get inside it Clean the housing exclusively with a soft damp cloth and a mild dishwashing liquid Troubleshooting In this chapter you will receive important information for the localisation of malfunctions and remedies for them Observe these instructions in order to avoi

Download Pdf Manuals

image

Related Search

Related Contents

Lightolier IS:5453 User's Manual  Guide pour la réutilisation des masques  SBC8530 Single Board Computer  Weitere Informationen  Video 60 Plus EFP_Version 2_9_02_12.qxp  Tripp Lite DVI-I to DVI-D Dual Link Video Cable Adapter (F/M)  GE GXUL30Z User's Manual  KitchenAid W10136157B User's Manual  Descargar manual  ABRITES Commander for VAG User Manual  

Copyright © All rights reserved.
Failed to retrieve file