Silvercrest KH 2131 User's Manual
Contents
1. ROOM1 ROOM2 TE 2 Fig Connection example for Transmitter Receiver Y m Fig Connection example for Receiver 8 KH 2131 Handling and operation SILVERCREST Connecting the transmitter Insert the jackplug of the cinchplug jackplug cable in the AV1 IN socket of the transmitter Connect the cinch plug of the cinchplug jackplug cable to the signal source for example a DVD player Pay heed to the colour coding If the signal source makes the output signals available to you via a Scart output use also the Scart to cinchplug adapter OUT Transmitter If need be you can connect a second signal source to the transmitter For this use the socket AV2 IN O If despite an occupied A V output you wish to additionally connect the used signal source to a TV connect the TV with the transmitter via the socket TO TV Y To do this use either one of the supplied cinchplug jackplug cables or an identical cable from a dealer see Figure Connection example transmitter Connect the infrared transmission diode cable to the socket IR of the transmitter Aim one of the three transmitter diodes at the device to be2. 1 a Health and safety requirements pursuant to 3 1 1 Article 3 1 a angewendete harmonisierte Normen EN 60065 2002 A1 2006 A11 2008 Harmonised Standards applied EN 50371 2002 Schutzanforderungen in Bezug auf die elektromagnetische Vertraglichkeit 3 1 2 Artikel 3 1 b Protection requirements concerning electromagnetic compatibility 3 1 2 Article 3 1 b angewendete harmonisierte Normen EN 301 489 1 V1 8 1 Harmonised Standards applied EN 301 489 3 V1 4 1 MaBnahmen zur effizienten Nutzung des Funkfrequenzspektrums Measures for the efficient use of the radio frequency spectrum Luftschnittstelle bei Funkanlagen gem 3 2 Artikel 3 2 Air interface of the radio systems pursuant to 3 2 Article 3 2 Angewendete harmonisierte Normen EN 300 220 2 V2 3 1 Harmonised standards applied EN 300 440 2 V1 4 1 Okodesign Richtlinie 2009 125 EC VO 278 2009 amp VO 1275 2008 Energy related Products Directive ErP 2009 125 EC Bochum 29 07 2010 foe Vlog wig Hans KompernaB Gesch ftsf hrer SILVERCREST Index Information for these operating instructions 0 0 00 cece eee ett e eee eee eee 2 Copyrights re ch Be aetna arene lee lea angaben 2 Intended A este ens ene ee 2 Warningses nase merci dete te he ae nahe 3 Basic Safety Instructions 0 e tent e tenes 4 Safety instucHons 4 62044 a0 coud ent aaa re paves 6 Items supplied and trans
3. to people UN WARNING A warning of this danger level signifies a possible dangerous situation If the dangerous situation is not avoided it can lead to injuries gt The directives in this warning are there to avoid personal injuries IMPORTANT A warning of this danger level signifies possible property damage If the situation is not avoided it can lead to property damage gt The directives in this warning are there to avoid property damage gt A notice signifies additional information that assists in the handling of the device KH 2131 3 el IE SILVERCREST Safety Safety In this chapter you receive important safety information regarding the handling of the device This device complies with the statutory safety regulations Incorrect usage can however lead to personal injury and property damage Basic Safety Instructions For safe handling of the device observe the following safety information Before use check the device for visible external damage Do not put into operation a device that is damaged or has been dropped Damaged cables or connections should be replaced by authorized qualified persons or by the customer service department Persons who due to their physical intellectual or motor abilities are incapable of operating the device safely may only use the device under supervision or direction from a responsible person Permit children to use the device ONLY under supervision R
4. Jackplug Cables 3 5 mm Stereo Jackplug Infrared transmission diode cable 3 diodes 3 Adhesive pads for the infrared transmitter diodes Audio Adapter 3 5 mm stereo jackplug on cinch sockets Operating instructions gt Check the contents to make sure everything is there and for visible damage gt Ifthe items supplied are incomplete or damaged due to defective packaging or transportation contact the Service Hotline see chapter Service Unpacking Remove all parts of the device and the operating instructions from the box Remove all packing material KH 2131 Setting up and connecting SILVERCREST Disposal of the packaging The packaging protects the device from transport damage The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable O The recirculation of packaging into the material circuit saves on raw material O and reduces generated waste Dispose of packaging material that is no longer needed according to the regionally established regulations gt If possible preserve the device s original packaging during the warranty period so that in the case of a warranty claim you can package the device properly for return Requirements on the Installation Location For the safe and error free operation of the device the installation location must fulfill the following conditions E Place the device on a firm
5. SILVERCREST Radio Set Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr KH2131 06 10 V4 KH 2131 EG Konformit tserkl rung gem dem Gesetz ber Funkanlagen und Telekommunikationsendeinrichtungen FTEG und der Richtlinie 1999 5 EG R amp TTE EC Declaration of Conformity in accordance with the Radio and Telecommunications Terminal Equipment Act FTEG and Directive 1999 5 EC R amp TTE Directive Hersteller Verantwortliche Person Komperna GmbH Manufacturer responsible person Burgstra e 21 44867 Bochum erkl rt dass das Produkt Funk bertragungs Set declares that the product Radio Transmission Set Type ggf Anlagenkonfiguration mit Angabe der Module KH 2131 Type if applicable configuration including the modules Telekommunikations Tk endeinrichtung v Funkanlage Telecommunications terminal equipment Radio equipment ABCD Verwendungszweck Intended purpose Ubertragung von Audio und Video Signalen Transmission of audio and video signals bei bestimmungsgem er Verwendung den grundlegenden Anforderungen des 3 und den brigen einschl gigen Bestimmungen des FTEG Artikel 3 der R amp TTE entspricht complies with the essential requirements of 3 and the other relevant provisions ofthe FTEG Article 3 of the R amp TTE Directive when used for its intended purpose Gesundheit und Sicherheit gem 3 1 1 Artikel 3
6. ange is reduced because of thick walls or ceilings The transmitter and receiver are not aligned with each other Poor transfer quality Disruptions in remote control commands 12 There are possibly other radio devices in use on the same frequency The infrared transmitting diode blocks the signal source of the infrared receiver Solution Switch the transmitter or receiver on with the On Off switch resp Switch the signal source on and if necessary start playback Select the same channel on the trans mitter and receiver with the channel selector switch resp Check the Cinch and AV connections on the connected devices as well as on the transmitter and the receiver Reduce the distance between the transmitter and the receiver Change the alignment of the transmitting antenna resp Change the channel setting on the transmitter and receiver Ensure that the transmitter and the receiver have the same channel setting Affix the infrared transmitting diode slightly offset to the signal source of the infrared receiver gt If you cannot solve the problem with the aforementioned methods please contact Customer Service KH 2131 Appendix Technical data Power Adapter Manufacturer Model Input Output Protection class Weight Transmitter Power supply 4 Channel Frequency Range A V Range free field Video input Audio input Operating temperature Humidi
7. anty does not affect your statutory rights The warranty period is not extended by repairs effected under warranty This applies also to replaced and repaired parts Damages or defects discovered after purchase are to be reported directly after unpacking at the latest two days after the purchase date Repairs carried out after the lapse of the warranty period are subject to charge DES UK LTD Tel 0871 5000 700 0 10 minute e mail support uk kompernass com CIE Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Standard call rates apply Mobile operators may vary e mail support ie kompernass com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www kompernass com KH 2131
8. epairs should only be carried out by authorized specialist companies or by the Customer Service department Incompetent repairs can result in significant risks for the user In addition warranty claims become void A repair to the device during the warranty period may only be carried out by a Customer Service department authorised by the manufacturer otherwise no additional warranty claims can be considered for subsequent damages Defective components may only be replaced with original replacement parts Only by using original replacement parts can you guarantee that the safety requirements are complied with Protect the device from moisture and liquid penetration Never submerge the device in water never locate the device in the close vicinity of water and never place any objects filled with liquids such as vases on the device Do not place any objects on the device Do not operate the device close to open flames e g candles Avoid direct solar radiation In the event of a defect occurring or a thunderstorm approaching remove the plug from the mains power socket KH 2131 Operating elements SILVER CREST Operating elements Figure A Transmitter SIIC ce E Antenna On Off switch LED operation indicator Infrared receiver Channel selector switch underside of the device IR Connection for infrared transmission diode cable TO TV Output for a TV AV1 IN Audio Video Input 1 AV2 IN Audio Video Input 2 DC IN C
9. flat and level surface E Do not locate the device in a hot wet or very humid environment or close to flammable material E The surfaces of furniture may contain components that could attack and weaken the rubber pads of the device If necessary place an anti slip mat or similar under the rubber pads of the device E The mains power socket must at all times be easily accessible so that the power adapter can be easily and quickly removed if necessary Electrical connections E Before connecting up compare the connection data voltage and frequency on the type plate of the device with that of your power supply network This data must tally in order to avoid damage to the device E Check to ensure that the power cable of the device is undamaged and that it will not be laid over hot surfaces and or sharp edges E Ensure that the power cable is not over taut or crimped folded E Do not let the power cable hang over edges trip wire effect gt It is recommended that in addition to switching the radio transmission set off you disconnect the power adapter from the mains power supply or use switchable power strips Only in this way can it be ensured that the device is fully switched off and a contribution made to the economical use of power KH 2131 7 SILVERCREST Handling and operation GB Handling and operation IE In this chapter you receive important information for the handling and operation of the device Transmitter
10. nning with cleaning IMPORTANT Damage to the device gt Make sure when you are cleaning the device that no moisture gets inside in order to avoid irreparable damage to it E Clean the surfaces of the device with a soft dry cloth Storage Disposal Storage If you do not intend to use the device for a longer time unplug it from the mains power socket and store it in a clean dry place away from direct sunlight Disposal of the device Do not dispose of the device in your normal domestic waste This product is subject to the provisions of European Directive 2002 96 EC Dispose of the device through an approved disposal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre KH 2131 11 SILVERCREST GB Troubl IE eshooting UN WARNING Troubleshooting gt Repairs to electronic devices may only be carried out by specialists who have been trained by the manufacturer Considerable danger to the con sumer and damage to the device can occur as a result of incorrect repairs Malfunction causes and remedies Defect No audio video transmission Possible cause The transmitter or receiver is not switched on The signal source e g DVD player is not switched on The transmitter and receiver are not adjusted to the same channel The transmitter or receiver are not connected properly The transmission r
11. onnection socket for power adapter ROOM 1 Switching signal source transmitter ROOM 2 Switching signal source receiver Figure B Receiver 60888888 Antenna On Off switch LED operation indicator Infrared receiver Channel selector switch underside of the device VIDEO Video Output AUDIO L R Audio outputs DC IN Connection socket for power adapter Figure C Accessories 8868888 KH 2131 Power adapter 2 x Cinchplug Jackplug Cable 2 x Scart to Cinch Adapter IN Receiver Scart to Cinch Adapter OUT Transmitter Infrared transmission diode cable Audio Adapter 3 5 mm stereo jackplug on cinch sockets Cinch to Cinch Cable SILVERCREST Setting up and connecting GB Setting up and connecting IE Safety instructions UN WARNING Damage may occur to people and property when operating the device Observe the following safety information to avoid any risks gt Packaging material may not be used as a play thing There is a risk of suffocation gt To avoid risks to persons and property pay heed to the requirements for the installation site and for the electrical connection Items supplied and transport inspection The device is delivered with the following components as standard 1 Radio Transmission Set 1 x transmitter 1 x receiver 2 Power adapters 1 Scart to Cinch Adapter IN Receiver 1 Scart to Cinch Adapter OUT Transmitter 1 Cinch to Cinch cable 3 core 2 Cinchplug to
12. port inspection o on 00 c cece cence eee eens 6 Unpacking voca wear Ad kai 6 Disposal of the packaging 0 e cece cece teen nett tenet een ees 7 Requirements on the Installation Location 222 eee cence teens 7 Elestrieal connections u aus esse ra Go het ee ea en 7 Connecting the transmitter 0 0 n nee eee eens 9 Connecting the receiver 0 cece ccc rr 9 Channel setting ices ch 0 00 45 dessen ce ame rn Sees nn 10 Opsratingithe Radio Set 0 2 aa dades 10 OIT ERES E EE an Tee een 11 Disposal of the devices sassi cheba cece ea nel ana 11 Malfunction causes and remedies 0000 e eens 12 Technical data ion ET EE aE TEO a 13 Waran ise A ie 14 RANA 14 MP ana ica Are of en E pee Mater 14 KH 2131 1 SILVERCREST Introduction fea Introduction IE Information for these operating instructions These operating instructions are a component of the Radio Set KH 2131 henceforth designated as the device and they provide you with important information about the intended use safety installation and connection as well as operation of the device These operating instructions must constantly be kept available close to the device They are to be read and applied by everyone assigned to operate and troubleshoot the device Retain these operating instructions and pass them on with the device to any future owners Copyright This documentation is copyright protected Any copying or rep
13. r To switch over for example the signal source AV2 for a TV connected to the receiver place the switch ROOM 2 at the position 2 see Fig Connection example Transmitter and Connection example Receiver Channel setting You can operate up to four radio transmission sets at one location When using multiple radio transmission sets they must be set to different channels The transmitter and receiver of each radio transmission set must be set to the same channel for a successful transfer Select a channel A B C D with the channel selector switch on the transmitter Select the same channel with the channel selector switch Y on the receiver Operating the Radio Set Switch the transmitter on by pressing the On Off switch Switch the signal source on for example a DVD player and if necessary start playback Switch the receiver on by pressing the On Off switch Switch the target device on for example a TV and activate the A V input to which you have connected the receiver The radio transmission should now function gt 10 The device transmits the audio video signals in the 2 4 GHz frequency range Take note that in the 2 4 GHz frequency range there is no general protection against listening in or viewing KH 2131 Cleaning Storage Disposal SILVER CREST Cleaning Risk of fatal electrocution gt Remove the power adapter from the mains power socket before begi
14. remotely controlled Attach the transmitter diode at an appropriate location using the supplied double sided adhesive pads The transmitting diode should be affixed immediately adjacent to the IR receiving diode on your device see Fig Connection example Transmitter Connect one of the power adapters to the DC IN socket of the transmitter and then plug it into a properly installed mains power socket Unfold the transmission antenna and point it in the direction of the receiver Connecting the receiver KH 2131 Connect the video output B and the audio outputs B to the target device e g a television For this use the supplied Cinch to Cinch cable Y Pay heed to the colour coding If the target device has a Scart input use additionally the Scart Cinch adapter IN Receiver amp Connect one of the power adapters to the DC IN socket of the receiver and then plug it into a properly installed mains power socket Unfold the transmission antenna and point it in the direction of the transmitter SILVERCREST Handling and operation GB IE gt Two signal sources can be connected to the radio transmission set The signal to be transmitted can be selected with the switch ROOM 1 resp ROOM 2 on the back of the transmitter To switch over for example the signal source AV1 for a TV connected to the transmitter place the switch ROOM 1 at the position 1 see Fig Connection example Transmitte
15. roduction including as extracts as well as the reproduction of images also in an altered state is not permitted without the express written consent of the manufacturer Intended use This device is intended exclusively for the wireless transmission of audio video and infrared signals in indoor areas This product is for domestic use only and is not intended for commercial applications This device is not intended for any other use or for uses beyond those mentioned Possible signal sources are for example VCRs satellite receivers DVB T Receivers CD DVD player etc IN WARNING Risks from non intended use Risks can be generated by the device if it used for unintended purposes and or other types of use gt Use the device exclusively for intended purposes gt Observe the procedures described in these operating instructions Claims of any kind resulting from damage caused by improper use incompetent repairs unauthorized modifications or the use of non approved spare parts are excluded The operator alone bears liability 2 KH 2131 Introduction SILVER CREST Warnings In the existing operation instructions the following warnings are used A warning at this danger level indicates a threateningly dangerous situation If the dangerous situation is not avoided it could result in death or serious injury gt Follow the instructions given in this warning notice to avoid the risks of death or serious injury
16. ty no condensation Dimensions Weight Receiver Power supply 4 Channel Frequency Range A V Frequency infrared signal Video output Audio output Operating temperature Humidity no condensation Dimensions Weight SILVER CREST Dongguan Gaoyi Electronic Co Ltd RSS1002 027090 W3U 100 240 V 50 60 Hz 0 2 A NETOS 75 g approx CY OEA 2 400 GHz 2 4835 GHz max 100 m 1V pp 2 8 V p p 1I OAE 5 90 KOSTON S 2em 168 g approx 9 V 0 3 A 2 400 GHz 2 4835 GHz 433 MHz 1Vpp 2 8 V p p 5 40 C 5 90 10 6 x 10 x 3 2 cm 164 g approx 13 SILVERCREST Appendix el IE Warranty You receive a 3 year warranty for this device as of the purchase date The device has been manufactured with care and meticulously examined before delivery Please retain your receipt as proof of purchase In the case of a warranty claim please make contact by telephone with our Service Department Only in this way can a postfree despatch for your goods be assured gt The warranty covers only claims for material and maufacturing defects not for transport damages worn parts or for damage to fragile components e g buttons or switches This product is for private use only and is not intended for commercial applications In the event of misuse and improper handling use of force and interference not carried out by our authorized service branch the warranty will become void This warr
Download Pdf Manuals
Related Search