Sherwood VD-4500 User's Manual
Contents
1. Ea Qs 00 J Disc Tray Open Close Play Pause Skip Stop 1 Press Open Close 4 The disc tray opens If the DVD Player is in standby mode when the Open Close button is pressed the DVD Player turns on and the disc tray opens In this case it takes several seconds until the disc tray opens Place a disc on the disc tray Put the disc in the tray with the label side facing up There are two different disc sizes Place the disc in the correct guide on the disc tray Press Play Pause b II The disc tray closes and playback starts The appropriate disc indicator lights The disc indicator does not light up for CDs that contain JPEG images For the other information that appears in the display see page 10 If the DVD Player is in standby mode when Play Pause b II is pressed the DVD Player turns on and playback starts In this case it takes several seconds until playback starts Tip to obtain a higher quality picture Occasionally some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD Video because the high resolution pictures on these discs include a lot of information While the amount of noise depends on the TV you use you should generally adjust the TV to reduce sharpness when viewing DVD Videos E To stop playback Press Stop E When you press Play Pause b II to restart playback playback starts from the location where you stopped playb2. Note The PROGRESSIVE function cannot be enabled when the disc containing MP3 WMA or JPEG format data files is inserted into the VD 4500 When your TV is not compatible with progressive mode the picture may be distorted When you insert a DVD Video Video CD or audio CD the various functions of the DVD Player will be set reset according to the SETUP MENU You can customize this setting menu according to your preference Setting Steps 1 Press SETUP during stop mode Se The SETUP MENU appears SETUP MENU MAIN PAGE GENERAL SETUP AUDIO SETUP E PREFERENCES EXIT SETUP GENERAL SETUP 2 Press A V to select a category then press ENTER gt Remove the disc to customize the PREFERENCES settings 3 Press A Y to select the item then press gt C D Re o gt 4 Press A V to select the setting then press ENTER To move the cursor to the item column press lt 4 5 Further steps may be needed depending on the item or setting Follow the steps described in the explanation of each item starting from page 28 Customizing the Function Settings To return to the MAIN PAGE Press A VY 4 b to select the main page then press ENTER or press RETURN To clear the setting menu Press A Y then select EXIT SETUP or press SETUP Note When a TV screen is not displayed the TV type setting may not be suitable for your TV General Setup
3. SETUP button Press to call up the Setup menu programmed on the DVD Depending on the DVD the Setup menu may be identical to DVD menu or title menu In Stop mode only RETURN button When you re using the DVD Players menu system press this button to return to the preceding menu screen amp DISPLAY button Press this button while you re playing a disc to see contained various playback features and gives you the information about the disc you re playing CLEAR button Press to clear entered values and settings Preparing the Remote Controller Inserting the Batteries Using the Remote Controller Remove the battery compartment cover by Point the remote controller toward the remote control pressing the tab and lifting up the cover sensor Remote control sensor 2 Insert the two batteries size AAA R3 Be sure to match the and ends of the batteries with the diagram inside the battery compartment Notes Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference Do not put any object such as a book on the remote controller The buttons of the remote controller may be pressed by mistake and drain the batteries Make sure the audio rack doors do not have
4. dise aise CIGTAL VIDEO VIDEO SUPER VIDEO VIDEO VIDEO CDs COMPACT Audio CDs DIGITAL AUDIO COMPACT COMPACT DIGITAL AUDIO aise Recordable DIGITAL AUDIO ReWritable aise ReWritable This unit can play CD R and CD RW discs recorded in CD Audio or Video CD format with MP3 audio files or with JPEG image files However there may be some discs that cannot be played back with this unit The causes of this impossibility include incompletion of disc finalization and the recording characteristics of the recorder as well as the properties damage or stain of the disc in use and stain or condensation on the pickup lens of this unit For details please refer to the instruction manual of the recorder You cannot playback discs other than those listed above This unit can play SVCDs but some functions will not work This unit can play DVD R DVD R DVD RW and DVD RW discs but depending on the recording unit the disc manufacturer etc playback sometimes may not be possible This player cannot play back any of the following discs DVD AUDIO discs DVD ROM discs DVD RAM discs SACD discs CD ROM discs Except MP3 and JPEG discs ISO 9660 level 1 VSD discs CDV discs Only the audio part can be reproduced CD G CD EG CD EXTRA discs Only the audio can be reproduced Photo CD discs Never attempt to play them This D
5. Ensure that the session is closed or finalized when data has been written on media There are cases where media on which the session has not be closed or finalized will not be played back correctly with this equipment There are cases where the folder names and file names will not be displayed correctly depending on the software used to save them Do not store files or folders other than MP3 WMA or JPEG on media to be played back with this equipment It is recommended that ten or less sessions are stored when recording MP3 files onto a media Incase of a multisession disc some time may be required until playback begins There are cases where playback is not possible when MP3 WMA JPEG files CD ROM and music CD information CD DA are saved on the same media Notes on Discs Care and Handling of Discs In handling a disc hold it carefully with edges Do not stick paper or write anything on the printed surface Fingermarks and dust on the recorded surface should be carefully wiped off with a soft cloth Wipe straight from the inside to the outside of the disc Always keep the discs in their cases after use to protect them from dust and scratches Do not use a cracked deformed or repaired disc These discs are easily broken and may cause serious personal injury and apparatus malfunction Notes Because the temperature inside this unit is very high in case of no further playba
6. In a steamy or very humid room When this unit is moved from a cold place to a warm one If moisture forms inside this unit it may not operate properly In this case turn on the power and wait about one hour for the moisture to evaporate H f there is noise interference on the TV while a broadcast is being received Depending on the reception condition of the TV interference may appear on the TV screen while you are watching a TV broadcast and this unit is left on This is not a malfunction of this unit or the TV To watch a TV broadcast turn off this unit EH Do not transport this unit with discs left in it EH Do not place on the component such as amplifier or receiver that generates heat If so the temperature inside this unit rises and malfunction may occur Introduction Safety Introduction Precautions re eereeaeeea cera areaner near nae nana 2 Getting Started Notes on DISCS 1522481 a nan TRE apelou dal nn M enterr e dut abade 6 Playable Discs Notes on DVD Videos About Video CDs MP3 WMA JPEG Compatibility Care and Handling Discs Differences in Disc Composition Notes on Copyright Facilities and Connections Control Position and Names ccccescceeeeceeeeseeeeeeeeeeeeaeeescaeecesneesceneesecaeeeseaueeeseaeeeseaeeesaaeeseeeeeessueeeesaeeeseaeees 9 Front Panel Rear Panel Display Remote Controller Preparing the Remote Controller isa 12 Inserting the Batteries Using t
7. Video output 1 0 V p p 75 negative sync pin jack S video output Y 1 0 V p p 75 C 0 286 V p p 75 PAL C 0 300 V p p negative sync Mini DIN 4 pin Component video output Y 1 0 V p p 75 negative sync Ps Pr 0 7 V p p 75 pin jack Audio output Optical digital output 22 5 dBm optical connector Coaxial digital output 0 5 V p p 75 pin jack Analog output 2 0 V rms 100 pin jack L R Specifications and features are subject to change without notice Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faeroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Occitan Afan Oromo Oriya Punjabi Polish Pashto Pushto Portuguese Quechua Rhaeto Romance DVD Menu Language Code List
8. GENERAL PAGE PoMoDE p auro SCREEN SAVER SUPER SMART 4 MAIN PAGE GENERAL SETUP E PIC MODE This adjusts the screen quality according to the material being played back AUTO The picture quality is adjusted automatically FILM Choose this setting to reproduce the picture quality of film material VIDEO Choose this setting to reproduce the picture quality of video material SMART Choose this setting to reproduce progressive and interlaced materials with limited motion SUPERSMART Choose this setting to reproduce progressive and interlaced materials with motion motion adaptive deinterlacing E ANGLE MARK ON When a picture recorded in different angles is played back P is displayed on the screen OFF is not displayed on the screen F4 is displayed when the camera angle is changed E OSD LANG Select the On Screen Display language American model ENGLISH FRENCH PORTUGUESE SPANISH Other models e ENGLISH FRENCH GERMAN ITALIAN PORTUGUESE e SPANISH E CAPTIONS NTSC only Some DVD videos contain special subtitles an enhancement of closed captions for hearing impaired persons The DVD Player automatically displays these special subtitles by setting this item to ON ON The extended subtitles are displayed automatically OFF The extended subtitles are not displayed E SCREEN SAVER Screen Saver If you pause a picture
9. Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangro Serbo Croatian Shinghalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Tegulu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Chinese Zulu
10. PASSWORD CHANGE The password for PARENTAL is changed PREFERENCES PAGE VIDEO OUTPUT DISC MENU om DEFAULTS v CHANGE PASSWORD o T To change the password PASSWORD CHANGE PAGE 7 OLD PASSWORD f NEW PASSWORD f CONFIRM PWD PLEASE ENTER PLD PASSWORD 1 Press the number buttons to enter old password then press ENTER 2 Press the number buttons to create a new 4 digit password then press ENTER 3 Press the number buttons to enter the new password then press ENTER Notes The password is set to 0000 by initial setting e Be sure not to forget your password You cannot change the password without the current password E DEFAULTS RESET Resets all settings other than PASSWORD to the factory settings Troubleshootino Check the following guide for the possible cause of a problem before contacting service Refer also to the respective instruction manuals of the connected components and TV DVD Player Symptoms The DVD Player doesn t switch on Causes The power cord is disconnected The main power is set to OFF There is external noise in the computer circuits of the DVD Player The AC fuse is blown Remedies Check the connection of the power cord Turn on the main power Switch off the main power then switch it on again If not recovered disconnect the power cord then connect it again The D
11. audio quality is the same as for optical This cable carries analog audio It s the most common Analog audio E connection format for analog audio and can be found cable RCA on virtually all AV components System Connections Connecting to a TV This player has 3 kinds of video output jacks Select one of the following connections Video jack connection Use the supplied audio video Connection Cable to connect S Video jack connection For higher quality video than video jack connection Component jack connection For higher quality video than S video jack connection Note The DVD Player can output NTSC or PAL format video depending on the setting on page 30 Make sure your TV supports the disc s video format E If your TV has component input connector necessary for progressive function Video connection Using a component video cable sold separately connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV Actual labels for component video inputs may vary depending on the TV manufacturer e g Y PB PR or Y CB CR In some TVs or monitors the color levels of the playback picture may be reduced slightly or the tint may change In such a case adjust the TV or monitor for optimum performance Note This connection is necessary to use progressive function To view Progressive scan video you need a TV with Progress
12. can play back MP3 WMA JPEG files recorded on CD R or CD RW Playing Back MP3 WMA JPEG A certain amount of time is required for the player to confirm the media on which MP3 WMA JPEG files have been recorded before playback will commence E Playback Press PLAY gt For JPEG discs Slide show starts Press STOP EE to display the NAVI screen Thumbnails may be displayed depending on the type of disc that is set Rotating a Picture JPEG Files Only It is possible to rotating a picture During JPEG file playback press A Y lt 4 on the remote controller Switching as shown below is done when the cursor buttons are pressed gt button 90 rotation in clockwise direction lt button 90 rotation in counterclockwise direction A button Vertical mirror image Y button Horizontal mirror image Various Play Modes 1 During stop mode press REPEAT on the remote controller to select the play mode REPEAT Each press switches the play mode FOLDER Playback the folder that is selected REPEAT ONE Repeat the file that is selected FOLDER REPEAT Repeat the folder that is selected DISC Playback all files on the disc DISC REPEAT Repeat all files on the disc ROOT Folder Play mode Time O A 00 00 07 k ROOT P3 DESTINY P3 LA PLUS BEL 2 P3 LOVE 2000 3 EN MP3 4 P3 REGRET 5 CN TEST JPG 6 ES WM 7 Selected file Program window 2 Press A V on the remote controller to select the
13. desired file or folder then press ENTER to start playback Ce gt When JPEG files are displayed the display is switched automatically from one file to the next The switching speed differs according to the file size 3 To stop playback press STOP E STOP Note When the play mode is FOLDER FOLDER REPEAT skipping to outside the folder being played by using i lt b buttons is not possible Other Operations The following operations can be performed directly from the remote controller Locating a Specific Title Chapter Track File by Entering the Numbers 1 Press the number buttons to select the desired title No or track No OOW CHOC OOR Example To select track No 23 When playing a DVD Select the desired title number in advance TITLE 05 CHAPTER 001 002 To select a chapter press then use the number buttons to select the desired chapter TITLE 01 05 CHAPTER KJAJ 0 0 2 2 Press ENTER Note To use this function turn PBC off by pressing TITLE PBC first Lo Press the number buttons on the remote controller to enter the desired file number or folder number CROO File numbers and folder numbers Example To select file No 23 When a folder is selected the contents of the selected folder will be displayed e When a file is selected playback of the selected file will start Note For selection of a number refer to the file numbers
14. files encoded with DRM Digital Rights Management copy protection will not play Disc may be ejected automatically or NO DISC will be displayed WMA MP3 JPEG discs must be ISO 9660 Level 1 or 2 com pliant CD physical format Mode1 Mode2 XA Form1 Romeo and Joliet file systems are both compatible with this player Use CD R or CD RW media for recording your files The disc must be finalized i e the session must be closed in order to play in this unit This player only plays tracks that are named with the file extension mp3 MP3 wma WMA jpg or JPG When naming MP3 WMA and JPEG files add the corre sponding file name extension mp3 wma or jpg Files are played according to the file extension To prevent noise and malfunctions do not use these extensions for other kinds of files Folder and track names excluding the file extension are displayed There are many different recording bit rates available to encode MP3 files This unit was designed to be compatible with all of them Audio encoded at 128 Kbps should sound close to standard audio CD quality This player will play lower bit rate files but please note that the sound quality becomes noticeably worse at lower bit rates The DV SP302 can play Exif format pictures supporting JPEG It is capable of playing at the maximum resolution of 5120x3840 for the baseline format 2048x1536 for the progressive JPEG format When saving files onto media
15. for a long time the screen saver automatically operates by setting this item to ON ON The screen saver is enabled OFF The screen saver is disabled Customizing the Function Settings Audio Setup AUDIO SETUP DIGITAL OUT D RANGE DITSTREAM DOWN SAMPLE Dune E AUDIO RELATED E DIGITAL OUT OFF BITSTREAM PCM Selects whether the digital output of the VD 4500 will output the PCM signal only the PCM and other signals or no digital signals at all E D RANGE ON OFF When the setting is ON soft sounds such as dialog can be heard more clearly without making loud sounds even louder When the setting is set to OFF there is no effect on the audio source Notes Dynamic Range is only effective with Dolby Digital audio sources The level may differ depending on the DVD The effect depends on your speakers and AV amplifier settings EH DOWN SAMPLE ON 48 k OFF 96 k If your AV amplifier or other connected component is compatible with high sampling rates 96 kHz set this to OFF 96K otherwise set it to ON 48K 96 kHz audio is converted to a more compatible 48 kHz Check the manual that came with the other component if you are unsure whether it is 96 KHz compatible Note On DVDs that contain copy protection the 96 kHz signal may only be output from the analog audio jacks The DTS 96 24kHz source will be enforced to be output in 48 kHz Preferenc
16. move to the previous chapter or track the next chapter or track on a disc DIGITAL OUTPUT COAXIAL jack Use coaxial cable to connect your DVD Player to an AV component that features digital input capability If the component has a Dolby Digital or DTS decoder you can enjoy theater quality multichannel sound DIGITAL OUTPUT OPTICAL jack Use optical cable to connect your DVD Player to an AV component that features digital input capability If the component has a Dolby Digital or DTS decoder you can enjoy theater quality multichannel sound ANALOG OUTPUT jacks Insert audio cables left and rights to these jacks on your DVD Player and to the corresponding Audio Input jacks left and right on your TV or receiver VIDEO OUTPUT VIDEO jack Connect a video cable to this jack and to the Video Input jack on your TV VIDEO OUTPUT S VIDEO jack If your TV has a S Video jack you can connect an S Video cable to your TV and to your DVD Player for improved video quality The S Video cable only carries the video signal remember to connect the left and right audio cables VIDEO OUTPUT COMPONENT PR CR PB CB Y jacks If your TV has component inputs you can connect a component video cable to your TV and to your DVD Player for ideal video quality The component video cable only carries the video signal remember to connect the left and right audio cables If you connect a TV that is compatible with a Pro
17. on the NAVI screen The file numbers shown on the display of the main unit differ from the file numbers entered directly with the number buttons as the numbers for each folder are displayed Other Operations Video CD CD Program Playback You can listen to the desired tracks of the current CD or e The unit stops when the STOP E button is pressed To restart program playback press the PROGRAM button display the program screen select the PLAY icon and press the ENTER button VCD in any desired order E Program edit EH Insert track During stop mode press the PROGRAM button on the remote controller The program edit screen appears 1 During stop mode press PROGRAM PROGRAM Program edit screen appears Track No TRACK PROGRAM LIST A SET TRACK VALUE Number of tracks Program list recorded on the disc 2 Select specific track by pressing A Y gt Cae 3 Select ADD icon on the screen to register selected value onto PROGRAM LIST then press the ENTER button De 4 You can select maximum 21 values by repeating step 2 3 5 Select PLAY icon on the screen then press ENTER to start program play se Ce 1 Select specific track to insert by pressing A Y TRACK PROGRAM LIST ES v m SET TRACK VALUE Move the cursor with gt to the PROGRAM LIST and select the column to be added with A Y The color of the column w
18. the disc tray Note Program repeat play is not available with MP3 WMA JPEG discs Other Operations Random Play The chapters or tracks of the disc are played in random order Press RANDOM while stopped RANDOM indicator lights up E To cancel random play Press RANDOM while stopped so that RANDOM indicator goes off Each time you press RANDOM random play will be on and off Notes You cannot play DVDs in random order When playing a PBC compatible Video CD with PBC on you cannot use this function To use random play turn PBC off by pressing TOP MENU then press RANDOM In Random play Backward skip is not possible You can only skip forward AND se CD Repeat Play Desired disc or title can be played back repeatedly Press REPEAT repeatedly Each time you press REPEAT the repeat option changes At the time of DVD playback m CHAPTER REPEAT ON Repeats the current chapter l TITLE REPEAT ON Repeats the current title REPEAT OFF Resumes normal playback At the time of Video CD CD playback REPEAT ONE Repeats the current track REPEAT ALL Repeats the entire disc REPEAT OFF Resumes normal playback Note For DVD the REPEAT button functions only for playback E To cancel repeat play Press REPEAT so that REPEAT indicator goes off Notes When playing a PBC compatible Video CD with PBC on you cannot use this function To use repeat play tur
19. A However some products may be supplied with a nonpolarized plug and CAUTION To prevent electric shock match wide blade of plug to wide slot CANADA fully insert ATTENTION Pour viter chocs lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond The available power supply voltage differs according to country or region However this unit is equipped with an Automatic Voltage Selector The power supply voltage of the area where the unit will be used automatically CHINA meets the required voltage within the range of AC 100 240 V without any EUROPE manual voltage adjustment 7 To ensure safe operation the three pin plug supplied must be inserted only into a AUSTRALIA standard three pin power point which is effectively earthed through the normal and household wiring Extension cords used with the equipment must be three core other and be correctly wired to provide connection to earth countries Improper extension cords are a major cause of fatalities The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe For your safety if in any doubt about the effective earthing of the power point consult a qualified electrician PRECAUTIONS EH Moisture condensation Moisture may form on the lens in the following conditions Immediately after a heater has been turned on
20. BC button If some DVD Videos which contain more than one title may have the menu like as a list of the titles the TITLE button can be used to select the desires title The details of operation differ depending on the disc used When playing a Video CD equipped with PBC function DVD Player will automatically enter the PBC on mode Press once to turn PBC off and press again to turn on 4 Number buttons 0 9 Select numbers by pressing these buttons PROGRAM button Press to see Program Edit Display on the screen in stop mode amp STANDBY button Toggle for Standby Off OPEN CLOSE 4 button Press to open or close the disc tray SLOW lt i gt buttons Allow you to play movies in slow mode Each time you press this button slow speed will be changed In the case of Video CD reverse SLOW cannot be activated SKIP k 4 gt PI buttons Allow you to move to the previous chapter or track the next chapter or track on a disc SEARCH lt lt gt gt buttons Allow you to search in reverse or forward through a disc while it is in play mode Each time you press these buttons search speed changes STOP button Stops playing a disc When a disc is playing if you press STOP E and PLAY the disc will start resume play When STOP EE is pressed again during stop mode the resume function is canceled PLAY gt button Begins to play disc close disc tray first if it is open SUBTITLE button Press to select various subtitle language on a disc
21. CDs This DVD Player supports Video CDs equipped with the PBC Version 2 0 function PBC is the abbreviation for Playback Control You can enjoy two playback variations depending on the type of disc Video CD not equipped with PBC function Version 1 1 Sound and movies can be played on this DVD Player in the same way as an audio CD Video CD equipped with PBC function Version 2 0 In addition to operation of a VIDEO CD not equipped with the PBC function you can enjoy playback with interactive software and search function using the menu displayed on the TV screen Menu Playback Some of the functions described in this Instruction Manual may not work with some discs MP3 WMA JPEG Compatibility This unit will play CD R and CD RW discs containing files saved in the MPEG 1 Audio Layer 3 MP3 or Windows Media Audio WMA format with a sampling rate of 32 44 1 or 48 kHz and JPEG format Incompatible files will not play Disc may be ejected automatically or NO DISC will be displayed This unit will not play 32 kHz WMA files encoded at 20 kbps Fixed bit rate MP3 files are recommended Variable bit rate VBR MP3 files are playable but playing times may not be shown correctly This player is compatible with WMA data encoded using Windows Media Player version 8 or less or Windows Media Player for Windows XP This player is not compatible with lossless encoding or variable bit rate VBR WMA files WMA
22. PUT ANALOG System Connections Connecting to A V Amplifier or Receiver To enjoy the sound advantage of the DVD Player Although you can reproduce the DVD Player s sound from the TV speakers with the connections on pages 14 connecting with an amplifier provides you high quality dynamic sounds To reproduce Dolby Digital surround and DTS surround sound you need to connect to an amplifier with a Dolby Digital and DTS decoder respectively E Digital connection If your amplifier has a digital input jack be sure to connect it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the DVD player Note In the Digital Out setting you can select whether the VD 4500 will output the PCM signal only or the PCM and other signals or no digital signals at all COAXIAL OPTICAL MPONENT Ta wm wO OJO s arts 000 HO 184 Connect one or the other RE OPTICAL COAXIAL DIGITAL AUDIO INPUT Amplifier or Receiver E Analog connection If your amplifier has no digital audio input make the analog connection AUDIO OUTPUT ANALOG AUDIO INPUT ANALOG Turning on Connecting the POWER Notes a Make sure that all appropriate connections have been The VD 4500 Is shipped with the main power POWER completed as described on page 13 to 15 switch in t
23. S Sherwood OPERATING INSTRUCTIONS Sherwood VD 4500 Progressive Scan DVD Player Progressive Scan 28 Ces ven JE Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated CAUTION dangerous voltage within the HIE OF EREC TRIE SHOCK product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons CAUTION TO REDUCE THE RISK OF REMOVE COVER OR LACK This symbol is intended to alert the NO USER SERVICEABLE PARTS user to the presence of important INSIDE REFER SERVICING TO operating and maintenance servicing QUALIFIED SERVICE PERSONNEL instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FCC INFORMATION FOR U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equip
24. T and A B indicators go off to display A TO B CANCELLED Note Repeat A B will not function for segments under 3 seconds L OFF CD VCDs SINGLE ELAPSED Elapsed time of the track being played SINGLE REMAIN Remaining time of the track being played TOTAL ELAPSED Elapsed time of the disc being played TOTAL REMAIN Remaining time of the disc being played L OFF Items marked by are not displayed in PBC mode for VCDs Notes Some DVD videos may not display the chapter number or elapsed time The displayed time information cannot be changed in pause mode The displayed information cannot be changed while a menu or the top menu is displayed DVD settings The following operations can be performed directly from the remote controller e Selecting a Playback Audio Setting Changing the Subtitle Language Changing the Camera Angle DVD Selecting a Playback Audio Setting Press AUDIO on the remote controller repeatedly during playback to select the audio language oV Notes Before changing the setting read through the explanation on Digital Audio Out on page 29 and carefully select the setting Depending on the disc it may be necessary to select the audio sound track using the DVD menu When this is the case press MENU to open the DVD menu and select the appropriate sound track as indicated on the DVD menu screen When you turn on the DVD Player or replace a di
25. VD Player doesn t start playback No disc is inserted The region number of the disc does not match that of the DVD Player An unplayable disc is inserted The disc is placed upside down The disc is not placed within the disc tray guide The disc is dirty The parental lock function is activated Open the disc tray and insert a disc See Regional Restriction Codes Region Number on the rear panel Check the playable discs Place the disc with the playback side down Place the disc within the proper guide on the disc tray Eject the disc and clean it Deactivate the parental lock function or change the parental lock level Brightness is unstable or noise is visible on the playback picture Copy protection is activated The TV is not compatible with progressive scan signal Connect the DVD Player directly to the TV Avoid connecting the DVD Player to the TV through a VCR Reset to the initial setting The playback picture is occasionally distorted The disc is dirty It is in fast forward or fast reverse playback The disc does not meet the standard Eject the disc and clean it Sometimes a small amount of picture distortion may appear This is not a malfunction See CD R RW Compatibility Information Playback doesn t follow the course of the disc s programs The DVD Player is in repeat playback mode memory playback mode or random playback mode etc Resume normal playbac
26. VD receiver uses the PAL NTSC color system and cannot playback DVD videos recorded in any other color system SECAM etc Avoid using heart shaped or octagonal discs Playing irregularly shaped discs may damage the internal mechanism of the DVD receiver Do not use discs that have residue from adhensive tape rental discs that have peeling labels or discs that have custom labels or stickers Otherwise you may not be able to eject the discs or the DVD receiver may become inoperative Discs with shapes such as these cannot be played About playing copy controlled CDs Some audio CDs feature copy protection that doesn t conform to the official CD standard Since these are nonstandard discs they may not play properly in the VD 4500 Notes on DVD Videos E Region code DVD players and DVD Videos have their own Region Code numbers which are assigned to each country or area as shown below DVD players are set to your Region Code number at the factory As a result if the region code number of this DVD player is different from that of the DVD Video playback of the DVD Video will not be allowed by the DVD player Oceania South America Playable gt GCE660E code Major Al North Europe countries regions America Japan orarea 9 Middle East Southeast P Russia Asia China Examples of playerble DVD Videos ao GE e InU S A In Europe About Video
27. ack because the location index is stored in memory For MP3 WMA JPEG playback see page 19 Notes The location where playback resumes may vary depending on the disc or the scene where you stopped Press Stop M again after stopping playback to clear the location index memory then press Play Pause b II to start playback E To remove the disc Press Open Close 4 to open the disc tray Remove the disc after the disc tray opens completely After removing the disc be sure to press the button again to close the tray CAUTION Keep your fingers well clear of the disc tray as it is closing Neglecting to do so may cause serious personal injury Basic Playback Various Playback E To play in fast reverse lt lt or fast forward gt gt Press SEARCH lt gt during playback Each press of the same button changes the playback speed To resume normal playback press PLAY gt Note The DVD Player mutes sounds and omits subtitles during fast reverse and fast forward E To skip chapters or tracks Press SKIP k 4 gt gt 1 during playback The chapter track or file in the direction of the button pressed is skipped and the selected chapter track or file will be played from the beginning When SKIP It lt is pressed once during playback the chapter track or file being played will be played from the beginning AD ND CD MPS E To pause playback still mode Press PAUSE STEP II during playback To start
28. aws in your country to record from DVD Video CD and MP3 disc etc Recording of copyrighted material may infringe copyright laws DVD Video is protected by the copyguard system When you connect the unit to your VCR directly the copyguard system activates and the picture may not be played back correctly This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Control Position and Name Front Panel Progressive Scon ETE EB Dos mes ES POWER button Turns on the main power supply Disc tray Toggle for standby and on 3 Open Close amp button Press to open or close the disc tray STANDBY indicator Lights in the standby mode Display Play Pause b II button Begins to play disc close disc tray first if it is open Temporarily stops playback when a disc is playing Press this button again for normal playback Rear Panel Stop m button Stops playing a disc When disc is playing if you press Stop E and Play the disc will start resume play When Stop W is pressed again during stop mode the resume function is canceled Skip K4 gt gt 1 buttons Allow you to
29. ck of disc unload the disc to prevent the high temperature from deforming the disc Do not expose discs to direct sunlight high humidity or high temperature for a long time When loading or unloading a disc in the disc tray always place it with the printed side up Printed Side Differences in Disc Composition E DVD All discs are divided up into smaller more manageable sections so that you can find specific content more easily DVDs are divided into one or more titles Each title may be further divided into several chapters Occasionally a chapter may contain index points effectively dividing the chapter up into several parts Title 1 Title 2 a E Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 aana Video CD CD Video CDs and CDs are divided into a number of tracks In rare cases a track may contain a number of index points effectively dividing the track up into several parts Track 1 Track 2 Track 3 Track 4 S e e E MP3 WMA JPEG MP3 MPEG 1 Audio Layer 3 is a compressed audio file format JPEG is a format for saving image files such as those containing digital photographs or illustrations Tracks within folders are automatically numbered T 001 T_002 etc Folder Folder File File File File File File Folder lt me lt File File lt _ lt Notes on Copyright Please check the copyright l
30. colored glass Placing the unit behind such doors may prevent proper remote controller operation Notes If there is any obstacle between the remote controller Do not mix new batteries with old batteries or different and the remote control sensor the remote controller kinds of batteries will not operate To avoid corrosion remove the batteries if the remote controller is not to be used for a long time Remove dead batteries immediately to avoid damage from corrosion If the remote controller does not operate smoothly replace both batteries at the same time The life of the batteries supplied is about six months but this will vary depending on usage System Connections To accommodate a wide range of home entertainment systems this player features numerous connection types for both audio and video Please refer to the instructions on this and the following pages to determine the best possible type of connections for your system Before Making Any Connections Read the manuals supplied with your AV components Don t connect the power cord until you ve completed and double checked all audio and video connections EH Optical digital terminals The optical digital terminals are provided with protection caps Before you connect a cable to a terminal remove the cap and keep it safely If you disconnect the cable put the cap back on the terminal E RCA AV connection color coding RCA type AV connections are u
31. es PREFERENCES PAGE v SET PREFERENCES E 5 T E TV DISPLAY NORMAL PS Pan Scan Select when a 4 3 TV is connected Displays pictures cropped to fill your TV screen Either or both sides of the picture are cut off This function is only available when using a disc that supports Pan Scan NORMAL LB Letter Box Select when a 4 3 TV is connected Displays wide screen images with masking bars above and below the picture WIDE Select when a 16 9 wide TV is connected Notes The displayable picture size is preset on each DVD video Therefore the playback picture of some DVD videos may not conform to the picture size you select e When you play a DVD video recorded in the 4 3 picture size only the playback picture always appears in the 4 3 picture size regardless of the TV shape setting e If you select WIDE and you own a 4 3 TV set the DVD playback picture will be horizontally distorted during playback Images will appear to be horizontally compressed Make sure the TV shape conforms to the actual TV in use Customizing the Function Settings E AUDIO Select the audio language American model ENGLISH FRENCH SPANISH CHINESE JAPANISE OTHERS Other models ENGLISH FRENCH SPANISH CHINESE JAPANISE GERMAN ITALIAN OTHERS To select other language 1 Select OTHERS and press the ENTER button 2 Input a 4 digit code by pressing the numbe
32. gressive scan signal you can enjoy both Interlaced and Progressive scan Control Position and Name Display PROGRESSIVE PBC TITLE CHAPTER TR 1 DVDI CD VCDI MP3 ACK HOUR Disc indicators Indicate the type of disc currently loaded 2 Play Pause indicators Illuminate in play or pause mode PROGRESSIVE indicator llluminates when the DVD player is set to progressive Time indicator Indicate playing time MEM indicator Illuminates during memory playback REPEAT indicator Illuminates during repeat playback mode RESUME indicator PBC indicator llluminates when the player is ready for resume llluminates when PBC is on for Video CD playback 5 TITLE indicator Parental Lock indicator Illuminates to indicate the current title number Illuminates in parental lock mode CHAPTER indicator Multifunction indicator Indicates display mode of the current chapter of DVD disc Indicates operating status messages etc TRACK indicator RANDOM indicator Indicates display mode of the current track number of Illuminates during random playback Video CD or CD E Display Examples During DVD Video playback During MP3 WMA audio playback Playing chapter 3 oftitle 2 Time information of Playing track 3 Time information of the current chapter the current track Notes Notes Track number is consecutive During JPEG image p
33. he Remote Controller System Connections sirs sr eenaa gere teen dent de reel teens Gea eens ere LES eS eU oe tidas nates 13 Before Making Any Connections AV Cable amp Sockets Connecting to a TV Connecting to A V Amplifier or Receiver Basic Operations TUPNINQONLL RARE te ETIENNE NA ee R k 16 Connecting the POWER Basic Playbacks ir hentai Me Lado ee ASE ER ee ee pads GS Lia 17 Starting Playback Various Playback Playing back MP3 WMA JPEG Rotating a Picture JPEG Files Only Various Play Modes Advanced Operations Other Op rations se sas nie amants le an het nan need nee ane taste ne 20 Locating a Specific Title Chapter Track File by Entering the Numbers Video CD CD Program Playback MP3 WMA JPEG Program Playback Random Play Repeat Play A B Repeat Play Viewing Information DVD SEMINO S 22 run as nt Mn en nn pad eed eee caves adn ras ere rio ee ete es 26 Selecting a Playback Audio Setting Changing the Subtitle Language Changing the Camera Angle Function Setup Customizing the Function Settings sise 27 Progressive Setting Setting Steps General Setup Audio Setup Preferences Others Troubleshooting erine ad ie ne en Mt ae a LA NT nan Rs aie 32 SPSCIIGALIONS 22 2022 israel A tee nn Ne ae net rte dd A al Sata dates 34 DVD Menu Language Code List 228 h aie eed en minime einen 35 Playable Discs This DVD Player can playback the following discs Disc Mark DVD Videos VIDEO
34. he on position ON When the power cord Turning on the DVD Player may cause a momentary is plugged in for the first time the VD 4500 will power surge which might interfere with other electrical automatically enter the standby mode and the STANDBY equipment such as computers To prevent indicator will light same condition after step 2 below interference use a wall outlet on a different circuit Sherwood pypuvenvossoo Progressive Seon FEM EB Dos men FE ta Sa POWER STANDBY Indicater POWER ON STANDBY 1 Plug the power cord into the power outlet on the wall He E E as C2 2 Press POWER to switch on the main power POWER ON dog cas STANDBY The DVD Player enters standby mode O O The STANDBY indicator lights up O O 3 Press PLAY PAUSE 11 on the DVD Player or AR Press POWER ON on the remote controller O The DVD Player turns on and the STANDBY indicator O O turns off It takes several seconds to read the disc in e A E Sen the disc tray O OO Ou To put the DVD Player in the standby mode press Cs STANDBY on the remote controller C Notes You can turn on the DVD Player by pressing OPEN CLOSE amp or PLAY PAUSE gt II Setting the STANDBY 5 button to standby does not shut off the power completely While the STANDBY indicator lights up the DVD Player can receive signals from the remote controller However if you press POWER on the DVD Player to switch off
35. here the cursor is located will change GEJ PRACA TRACK PROGRAM LIST a INSERT i DELETE PLAY CLEAR SELECT PROGRAM LIST Other Operations 3 Press PLAY lt use A Y to move the cursors to the INSERT icon and press ENTER The new track will be inserted after below the selected column 4 CTED TS oy INSERT ITEM TO THE LIST E Delete program During stop mode press the PROGRAM button on the remote controller 1 Move the cursor with to the PROGRAM LIST and select the column to be deleted with A V The color of the column where the cursor is located will change TRACK PROGRAM LIST EN INSERT mm DELETE SELECT PROGRAM LIST 2 Press PLAY 4 use A Y to move the cursor to the DELETE icon and press ENTER 8 TRACK PROGRAM LIST ES INSERT m DELETE PLAY C2 Coa CLEAR 1 TRACK DELETE The selected value is deleted Note To use this functions turn PBC off by pressing TITLE PBC first E Clear program List In following case Program list would be cleared 1 When you open and close tray 2 When you turn power off and on 3 Press the CLEAR button during display of the Program edit screen Other Operations MP3 WMA JPEG Program Playback You can listen to the desired files of the current MP3 WMA JPEG disc in any desired order EH Program edit 1 During stop mode press PROGRAM PROGRAM 2 Press 4 to select the file then p
36. hootino Remote Controller Symptoms Causes Remedies The buttons on the DVD No batteries are inserted in the remote Insert new batteries Player operate but the controller buttons on the remote The batteries are worn out Replace with new batteries controller do not operate The remote controller is not pointed at the Point the remote controller at the remote sensor of remote sensor of the DVD Player the DVD Player The remote controller is too far from the Operate the remote controller within 5 m 16 DVD Player feet Because the unit contains a microcomputer to provide advanced functions it may malfunction due to external noise or static electricity If this happens press the POWER switch on the unit and then press it again after about five seconds DVD Player Power supply AC 120 V 60 Hz North America models AC 220 240 V 50 60 Hz Other models Power consumption 16W Weight 6 6 lbs 3 0 kg External dimensions W X Hx D 17 1 8 x 3 3 16 11 1 8 435 X 81 5 X 283 mm Signal system NTSC PAL Frequency response Digital output 4 Hz to 22 kHz 48 kHz sampling DVD linear sound 4 Hz to 44 kHz 96 kHz sampling Signal to noise ratio digital output More than 90 dB Audio dynamic range digital output More than 90 dB Harmonic distortion digital output Less than 0 008 Wow and flutter Below measurable level Outputs
37. ive scan capability Please check your TV s manual Audio connection Using the supplied audio video cable make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV OL AUDIO INPUT ANALOG ioe VIDEO INPUT COMPONENT E If yourTV has S Video input connector Video connection Using an S video cable sold separately Connect the VIDEO OUTPUT S VIDEO jack to the corresponding S video input jack on the TV Audio connection Using the supplied audio video cable make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV VIDEO OUTPUT S VIDEO S VIDEO VIDEO INPUT AUDIO INPUT ANALOG E If your TV has video input connector Video connection Using the supplied audio video cable make video connection from the VIDEO OUTPUT VIDEO jack to the corresponding video input jack on the TV Audio connection Using the supplied audio video cable make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV Note Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the TV yellow for video red for R right audio and white for L left audio C VIDEO VIDEO INPUT AUDIO IN
38. k The picture from the DVD Player doesn t appear on the TV screen The TV is not set to receive the output signals from the DVD Player The DVD Player is not properly connected While in the progressive mode the signal will not be output from the composite and S video terminals Set the TV to the DVD Player s input Check the connections to the DVD Player Press the PROGRESSIVE button to switch to the interlace mode or connect the TV that supports the progressive format using the COMPONENT terminals No sound or inaccurate sound is reproduced A wrong sound signal conversion method Digital Audio Out is selected The TV is not set to receive the output signals from the DVD Player The DVD Player is not properly connected The system is in fast forward rewind or slow motion play mode The disc does not meet the standard Check the current sound signal conversion method and select the right setting for Digital Audio Out Set the TV to the DVD Player s input Check the connections to the DVD Player Resume nomal playback See CD R RW Compatibility Information The buttons on the remote controller and DVD Player do not operate Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation Switch off the main power then switch it on again If not recovered disconnect the power cord then connect it again Troubles
39. layback Some discs may not display chapter numbers During Video CD playback Playing track 3 Time information of the current track Note Note f The disc indicator does not light up for CDs that Some discs may not display track numbers or elapsed time contain JPEG images Playing 3rd image During CD playback Playing track 3 Time information of the current track Control Position and Name Remote Controller POWER ON button Toggle for Standby on PROGRESSIVE button When component video connection is used to connect this player and TV is compatible with progressive press to enjoy the progressive video image RANDOM button Press to do random playback 4 REPEAT button Press to repeat playback You can repeat a title chapter track or entire discs A B button Press to play section A B repeatedly PAUSE II button Temporarily stops playback when a disc is playing Press PLAY gt button for normal playback ANGLE button Press to select various camera angles on a disc AUDIO button Press to select various audio languages on a disc When playing a Video CD press to select the audio channel ENTER button Press this button to select and execute a highlighted menu item Cursor buttons A V lt gt Use the cursor buttons to select the items or settings MENU button Displays the DVD Disc Menu on the TV screen in play mode and Setup Menu in stop mode TITLE P
40. ment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CAUTION Invisible laser radiation when the unit is open Do not stare into beam CLASS 1 LASER PRODUCT CAUTION USE OF ANY CONTROLS ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE Safetv Introduction 1 Read Instructions All the safety and operating instructions should be read before the product is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the product and in the operating instructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug this produc
41. n PBC off by pressing TITLE PBC first With some DVDs repeat playback may not be possible For playing MP3 WMA or JPEG files repeatedly see page 19 E To repeat program play During program playback press the REPEAT button on the remote controller Each press the button switches the mode REPEAT ONE REPEAT ALL REPEAT OFF Other Operations A B Repeat Play The A B repeat function lets you mark a segment to repeat between the beginning A and the end B of the segment you want to replay 1 Press A B when you want to choose a scene sound as the beginning point Display Lights REPEAT A 2 Press A B again to choose a scene sound as the end point Display Lights REPEAT The DVD Player automatically returns to point A and starts repeat playback of the selected segment A B Viewing Information You can view information about a disc on the TV screen Press DISPLAY during playback pIsPLAY ES Each time you press DISPLAY the on screen display on the TV screen changes as follows DVDs Title number and chapter number display Example TITLE 01 03 CHAPTER 07 20 00 10 12 elapsed time of the title TITLE REMAIN Remaining time of the title being played CHAPTER ELAPSED Elapsed time of the chapter being played CHAPTER REMAIN Remaining time of the chapter being played E To cancel A B Repeat play Press A B so that REPEA
42. nna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this product form the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of othe
43. playback press PLAY gt ap voy E Playing frame by frame Press PAUSE STEP II repeatedly during playback Each time you press the button the picture advances one frame To resume normal playback press PLAY gt Note Video CDs cannot be played frame by frame reverse E To play in slow motion Press SLOW ID during playback Each press of the same button changes the playback speed To resume normal playback press PLAY gt Note Video CDs cannot be played in slow motion reverse ET SS SLOW I gt 5 De O O PAUSE STEP HI ps TITLE PBC Sherwood REMOTE CONTROL UNIT M 20 a E PBC function for Video CDs When playing a Video CD equipped with PBC function DVD Player will automatically enter the PBC on mode Press the TITLE PBC button to turn PBC off Press again to turn on Notes The sound is muted during slow motion still mode and frame by frame playback The playback speed may differ depending on the disc Do not move the DVD Player during playback Doing so may damage the disc Use OPEN CLOSE 4 on the DVD Player to open and close the disc tray Do not touch the disc tray while it is moving Doing so may cause the DVD Player to malfunction Do not press down on the disc tray or put any objects other than playable discs on the disc tray Doing so may cause the DVD Player to malfunction Basic Playback The VD 4500
44. r attention to cords at plugs convenience receptacles and the point where they exit from the product 14 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure 1 PORTABLE CART WARNING National Electrical Code ANSI NFPA 70 15 16 17 18 19 20 21 22 23 24 Figure 1 Example of antenna grounding as per ANTENNA GROUND ELECTRIC SERVICE EQUIPMENT lt GROUNDING CONDUCTORS NEC SECTION 810 21 A GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside ante
45. r buttons on the remote controller DVD Menu Language Code List page 35 3 Press the ENTER button Note Depending on the disc a language recorded on the disc may be given priority and selected automatically when the disc is loaded regardless of the setting E SUBTITLE Select the subtitle language American model ENGLISH FRENCH SPANISH CHINESE JAPANISE OTHERS OFF Other models ENGLISH FRENCH SPANISH CHINESE JAPANISE GERMAN ITALIAN OTHERS OFF To disable subtitles To select other language 1 Select OTHERS and press the ENTER button 2 Input a 4 digit code by pressing the number buttons on the remote controller DVD Menu Language Code List page 35 3 Press the ENTER button Notes Some DVD Video may be set to display subtitles in a different language than you selected A prior subtitle language may be programmed on the disc Some DVD Video allow you to change subtitle selections only via the disc menu If this is the case press MENU and choose the appropriate subtitle language from the selection on the disc menu E DISC MENU Select the disc menu language American model e ENGLISH FRENCH SPANISH CHINESE JAPANISE OTHERS Other models ENGLISH FRENCH SPANISH CHINESE JAPANISE GERMAN ITALIAN OTHERS To select other language 1 Select OTHERS and press the ENTER button 2 Input a 4 digit code by pressing
46. r controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Notes 1 2 3 Item 12 is not required except for grounded or polarized product Item 14 and 16 are not required except for units provided with antenna terminals Item 14 complies with UL in U S A Precautions FOR YOUR SAFETY Units shipped to the U S A and Canada are designed for operation on 120V AC only Safety precaution with use of a polarized AC plug U S
47. ress ENTER c HD Ca PROGRAM PROG EDIT NAVI MP3 DESTINY 1 ROOT MP3 DESTINY MP3 LA PLUS BEL MP3 LOVE 2000 E MP3 MP3 REGRET TEST JPG AWM Program Window The selected file goes to program window You can select a maximum of about 100 files by repeating step 2 However note that the maximum number of programmable files depending on the number of files and folders in the MP3 WMA JPEG disc and on the total number of characters used in the file and folder names Delete Program During program edit mode press A Y in the program window select the file to be deleted and press CLEAR TA CLEAR CA O After the STOP E button has been pressed and the program has been confirmed the program no longer can be changed 3 Press STOP Mand confirm the program STOP PROG END is displayed PROG END XEN MP3 DESTINY 1 Mp3 LOVE 2000 2 MP3 LA PLUS BEL 2 P3 LOVE 2000 3 NS MP3 4 MP3 REGRET 5 6 After the STOP E button has been pressed and the program has been confirmed the program no longer can be changed 4 Press PLAY gt to start program playback Confirm that the cursor is at the position of a file and press the PLAY gt button Playback is not possible when the cursor is at the position of a folder Tip All programs can be canceled by pressing the PROGRAM button during stop in program mode All programs also can be canceled by opening
48. s proper ventilation is provided or the manufacturer s instructions have been adhered to 11 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions 12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet this is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug 13 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particula
49. sc the DVD Player returns to the automatic setting in the setting menu see page 30 Depending on the disc pressing AUDIO may display a disc menu For more details refer to the instruction notes on the disc am Changing the Subtitle Language Press SUBTITLE on the remote controller repeatedly during playback to select the subtitle language SUBTIT g Notes When you turn on the DVD Player or replace a disc the DVD Player returns to the automatic setting in the setting menu see page 30 During some scenes the subtitles may not appear immediately after you change the subtitle setting Some DVD Video are set to display subtitles automatically and you cannot turn them off even if you set the subtitle function to off Depending on the disc pressing SUBTITLE may display a disc menu For more details refer to the instruction notes on the disc OD Changing the Camera Angle If the scene was recorded from multiple angles you can easily change the camera angle of the scene you are watching Press ANGLE on the remote controller repeatedly during playback to select camera angle ANGLE Customizing the Function Settings Progressive Setting When component video connection is used to connect this player and TV is compatible with progressive you can enjoy the progressive video image 1 Press PROGRESSIVE PROGRESSIVE E To restore the Interlace mode press PROGRESSIVE
50. sually color coded red white and yellow Use red plugs to connect right channel audio inputs and outputs typically labeled R Use white plugs to connect left channel audio inputs and outputs typically labeled L And use yellow plugs to connect composite video inputs and outputs Push plugs in all the way to make good connections loose connections can cause noise or malfunctions To prevent interference keep audio and video cables away from power cords and speaker cables AV Cables amp Sockets Video Cable Socket Description e pee mca Component video separates the luminance Y and Component video eee CT color difference signals Pr CR P8 Cs providing the dable m mi ec best picture quality Y Y Some TV manufacturers label their component video sockets slightly differently S video cable Toa S Video separates the luminance and color signals and VIDEO provides better picture quality than composite video Composite video viro Composite video is commonly used on TVs VCRs and other video equipment Use only dedicated composite cable video cables Audio Cable Socket Description 3 ani OPTICAL Offers the best sound quality and allows you to enjoy ue surround sound e g Dolby Digital DTS The audio quality is the same as for coaxial Coaxial digital E Offers the best sound quality and allows you to enjoy audio cable surround sound e g Dolby Digital DTS The
51. t from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like 8 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer 9 A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unles
52. the main power the remote controller cannot be used to turn on the DVD Player F Sherwood To switch off the main power press POWER again REMOTE CONTROL UNIT RM 205 Basic Playback Before playing Turn on the TV and set the TV to the DVD Player s input Turn on the audio system and set it to the DVD Player s input if an audio system is connected to the DVD Player DVD Video Video CD CD MP3 WMA JPEG can be played with the DVD Player see Notes on Discs on page 6 and 8 Do not play anything else About the marks in the pages related to disc operat ion 2 means the function or title is related to DVD Video operation ac means the function or title is related to Video CD operation means the function or title is related to audio CD operation Warning If the DVD Player is connected to the TV or amplifier through the analog audio jacks do not play DTS encoded discs Excessive noise may be output from the analog stereo jacks which may damage the connected equipment To reproduce DTS surround sounds digital connection to an amplifier with a DTS decoder is needed means the function or title is related to MP3 WMA sound operation Both MP3 and WMA are referred to as MP3 in the following pages means the function or title is related to JPEG image operation Starting Playback Progressive Scan EM ES Des men IE
53. the number buttons on the remote controller DVD Menu Language Code List page 35 3 Press the ENTER button Note Some DVD Video may not include your pre selected language In this case the DVD player automatically displays disc menus consistent with the disc s initial language setting Customizing the Function Settings M PARENTAL DVD videos equipped with the parental lock function are rated according to their content The content allowed by a parental lock level and the way a DVD video can be controlled may vary from disc to disc For example some discs allow you to edit out violent scenes unsuitable for children and replace them with more suitable scenes or lock out playback of the disc altogether a bp wosa 2 O auo srg m SUBTITLE 4 PG 13 DISC MENU 5 J Du er q _eassworo 7N617 v SET PARENTAL CONTROL Change the Parental Level according to the settings printed on the DVD disc jacket or accompanying documentation If you do not want to use Parental Level select NO PARENTAL To change the parental lock level 1 Select the parental lock level then press ENTER 2 Press the number buttons to enter 4 digit number then press ENTER When you enter a wrong password press RETURN to return to the main page Note DVD videos may or may not respond to the parental lock settings This is not a defect in the DVD player Make sure this function works with your DVD videos E
Download Pdf Manuals
Related Search