Samsung STM-19LA/17LA User's Manual
Contents
1. RED GROUND Pin14 V SYNC Pin 7 GREEN GROUND Pin 15 SLC for DDC Pin 8 BLUE GROUND e ACCESSORY 1 POWER CORD 2 USER S MANUAL 3 PC cable 4 Adaptor 5 Remote Control 6 Batteries 7 Wall mount Option 8 Rack mount Option 13 USER S MANUAL POWER MANAGEMENT This monitor features a power management system to power down upon receipt of the VESA DPMS The display power management signaling from a VESA DPMS video card The VESA DPMS compliant video card performs this signaling system through not sending horizontal vertical or sync signal This monitor enters an appropriate mode through identifying each of the three modes of the signaling system e POWER CONSUMPTION MODE POWER CONSUMPTION MODE POWER CONSUMPTION ON lt 50W SUSPEND lt 11W STANDBY lt 11W ACTIVE OFF lt 8 5W e LED INDICATOR The power management feature of the monitor is comprised of four stages On Green Standby Suspend Active off Red on off 1 sec and Unsupported mode Green MODE LED COLOR MONITOR OPERATION ON GREEN Normal Operation STANDBY eas tH ae SUSPEND RED ON OFF Screen blanks after preset idle time and some electronic circuits or all 1 SEC circuitry in the monitor shutdown ACTIVE OFF UNSUPPORTED MODE GREEN Normal operation but the on screen display will show error massage POWER OFF RED Not opreation TROUBLE TROUBLESHOOTING TIP No image on display screen 1 Check that power cord of the monitor have been connected securely2. Stereo Audio Signal Input 9 S VIDEO Y C IN Y C separated signal input 10 S VIDEO Y C OUT Y C separated signal looping output 11 PC STEREO IN 6 USER S MANUAL REMOTE FUNCTIONS B REMOTE CONTROLLER 1 POWER Turns the power ON or OFF There will be a few seconds delay before the display appears 2 SOURCE Select pc or video AV1 AV2 S Video PC sources 3 APC Auto Picture Control Select picture mode 4 ACC Auto Colour Control Select Colour mode 5 AV1 Select AV1 mode 6 AV2 Select AV2 mode 7 S VIDEO Select S VIDEO mode 8 PC Select PC mode 9 AUTO Auto geometry adjustment in PC Source 10 MUTE Mute the sound 11 MENU Activates and exits the On Screen Display 12 EXIT Exit the On Screen Display 13 VOL gt Increases or decreases the level of audio volume 14 UP DOWN Move to OSD menu 15 ENTER Accepts your selection or displays the current mode 16 INFO Input mode information Display 17 STILL Pause the picture POWER SOURCE CONTROLS AND FUNCTIONS CO O71 Po e Front Key Control 1 SOURCE Select input source and move the previous menu 2 MENU Activates and exits the On Screen Display This button can also be used to move previous menu or status OSD MENU MAIN Custom Picture Sound Setup 3 4 AUTO W This button allows user to enter the sub menu of the activated function AUTO Auto geometry ad
3. into wall outlet or grounded extension cable or strip 2 Power switch should be in the ON position and LED is lit 3 Check that the Brightness and or the Contrast adjustments of the Display haver not been turned down to minimum levels Going to Sleep message on 1 The signal cable should be completely connected to the video card computer screen 2 The video card should be completely seated in its slot and the computer is switched ON Display image is not centered too Push the down key in front side or Auto key in remocon small or toolarge in PC mode Vertical or Horizontal noise is Adjust Clock and Phase in the OSD present in the picture 44 USER S MANUAL SPECIFICATIONS Model Name STM 19LA STM 17LA Composite 2ch input 1 0Vp p 75 terminated loop through out Video S VIDEO 1ch input Y C loop through out VGA 1ch input Resolution 1280x1024 60Hz Frequency Horizontal KHz 31KHz 64KHz Vertical Hz 50Hz 75Hz 720x480 60Hz 720x576 50Hz 800x600 60 75Hz VOAM 1024x768 60 75Hz 1280x1024 60Hz Power Consumption Max 42W Max 36W Dimensions Net 430x428x200mm 382 4x390 5x200mm WxDxH Packing 490x506x225mm 436x476x225mm Weight kg Net Weight 6 61Kg 6 20Kg Gross Weight 8 43Kg 7 73kKg Power Supply DC 12V 4 16A Operating Temperature 50 F 104 F 10 C 40 C Environmental Operating Humidity 10 80 Non condensing Considerations Storage Temperature 4 F 113 F 20 C 45 C Storage Humidity 5 95 Non condensing Siz
4. LA CORNEY BURON tO Sere Ine von Press the MENU button and then up a down button to select Press right button to adjust Volume he Set Seo Press the MENU button to save the Setup menu Color Tona Mute Pichia Moda Color Tone Muto Woltera E Ener Menu Press the up a down w button to select the PC Press the p or ENTER button Picture Sound E F Auto Adiu a Fhaso H Posibon VePombon E 7 Fraquency ry r w ly Press the up a down w button to select PC sub menu Press the right or ENTER button and then left right p button to adjust PC setting Press the MENU button to save Press the right gt or ENTER button 1 Reset Press ENTER button to select the reset Reset Select to reset all setting to the factory default values Language OSU Tons ive Saraan Koy Lock Firsat Langumge O30 Tona Blue Sereen Kay Lock Portugu s Maderanmd e Auto Adjust Auto geometry adjustment e Phase Adjust the number of horizontal picture elements H position Move image horizontally on screen right or left e V position Move image vertically on screen up or down e Frequency Adjust the vertical noise of screen image owe J Erba henu M Manu i Press the up a down w button to select the Press the up a down w button to select Language menu language Press the right or ENTER button Press the MENU butto
5. NS e NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel e DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard do not expose the unit to rain or moisture This unit is designed to be used in the office or home Do not subject the unit to vibrations dust of corrosive gases e KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising Do not cover the unit or place anything on the top of unit e AVOID HEAT Avoid placing the unit in direct sunshine or near a heating appliance e TO ELIMINATE EYE FATIGUE Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor e BE CAREFUL OF HEAVY OBJECT Neither the monitor itself nor any other heavy object should rest on the power cord Damage to a power cord can cause fire or electrical shock USER S MANUAL FCC RF INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarant
6. SAMS An Ideal Face of Security SUNGA i E iT ie User s Manual ALES NE el U O Thank you for purchasing a SAMSUNG LCD Monitor e SAMSUNG TECHWIN CO LTD i 145 3 Sangdaewon dong Jungwon gu Seongnam si Gyeonggi do 462 120 Korea Before attempting to connect or operate this product E EAA E please read these instructions carefully and save this manual for future use e SAMSUNG OPTO ELECTRONICS UK LTD Samsung House 1000 Hillswood Drive Hillswood Business Park Chertsey Surrey KT16 OPS TEL 44 1932 45 5308 FAX 44 1932 45 5325 e lk bated a VAN 08 04 www samsungcctv com L39ME0145 ENGLISH USER S MANUAL CONTENTS IMPORTANT SAETY INSTRUCTIONS at cccccsncssnccsvesetcsnsseneesverectessseneastarenssntes 3 SAFETY INSTRUCTION sseinsscssamstanssevatensansssncsaatspaaseahsaceersh shaesschabsieacsennosatesauiy 4 CAUTION aeea a aa sg bo ea E E dp anew oemprsetaeeE 5 FCC RF INTERFERENCE STATEMENT 00 ecceeeeeeeeeeeeeeeeeeneeeeeeeeneeeeeeseeaes 6 CONNECTING WITH EXTERNAL EQUIPMENT ssicccccatcavcnseeancencenes 6 REMOTE FUNG TIONS serit irian enine ioe E E E 7 CONTROLS AND FUNG TIONS sessies nA EA EAEE 7 OSD MENU DESCRIPTION a ciecnanre cucu eana Eanan EEEE aa 8 MON TIN TOUDE sea R E a S 13 D SUB CONNECTOR PIN ASSIGNMENTS cceccceeeeeessseeeeeeeeseeeeeeeeeaes 13 POWE RENANA SENIE NT oriin e eee 14 050 O B O18 Cec Seer ee ere ee e er 14 SPE Ge ON et a a 15 BINEN ON e t
7. e 19 Diagonal AM TFT 17 Diagonal AM TFT Active Display Area 376 32x301 056mm 337 92x270 336mm Pixel Pitch mm 0 294mm H x 0 294mm V 0 264mm H x 0 264mm V LCD Panel Spec Brightness cd m2 300cd m2 Contrast Ratio 800 1 1000 1 Response Time ms 5ms Viewing Angle L R T B 80 80 75 85 80 80 80 80 e Technical specifications are subject to change without notice DIMENSION STM 19LA STM 17LA 382 58 7 15
8. ee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Only shielded interface cable should be used Finally any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment e DOC COMPLIANCE NOTICE This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications CONNECTING WITH EXTERNAL EQUIPMENT A BOTTOM PANEL CONTROL 1 2 3 4 5 6 7 8 9 10 11 rOOODOKM inal DVR VCR 1 DC12VIN 2 D SUB IN PC Signal Input 3 VIDEO 1 AV1 IN Composite signal Input for AV1 4 VIDEO 1 AV1 OUT Video looping output for AV1 5 VIDEO 2 AV2 IN Composite signal Input for AV2 6 VIDEO 2 AV2 OUT Video looping output for AV2 7 8 AUDIO IN L R
9. he Custom menu sub menu Press 4 right p button to adjust picture setting Press the MENU button to save 8 USER S Te B Picture Sound Menu Only Video mode Picture Sound Picture Mode Custom Color Tone Warm Mute Off Si _ Volume 20 Press the MENU button and then up a down w button to select the Picture Sound Press the right or ENTER button 1 Picture Mode Picture Sound Press the up a down w button to select the Picture Mode Press the right or ENTER button and then press up a down w button to select the desire Picture Mode Picture Sound Ficture Mode Standard MO P Fi tura Moda Tonma Murba on H i Musba Volume 20 Volume Press the up a down w button to select the Color Press the or ENTER button and then up a Tone down button to select the desired color tone Press the MENU button to save Picture Sound E J Picture Mode Color Tore heh be Press the up down button to select the Color Tone Picture Sound j F Picture Moda Color Tone Mute Wolunrra PG a Select Maru Press the gt or ENTER button and then up down button to select the desired Mute Press the MENU button to save US S MANUAL TT UU C SETUP MENU Language OSD Tone Blue Screen Kay Lock 4 Volume Move lll Menu Pona sand Press NEUP
10. ing the product on a bed sofa rug or other similar surface This product should never be placed near or over a heat register This product should not be placed in a built in installation unless proper ventilation is provided 5 This product should be operated from the type of power source indicated on the marking label If you are not sure of the type of power available consult your dealer or local power company 6 This product is equipped with a 3 wire grounding type plug having a third grounding pin This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the purpose of the grounding type plug 7 Do not allow anything to rest on the power cord Do not locate this product where persons will walk on the cord 8 If an extension cord is used with this product make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating Also make sure that the total of all products plugged into the wall outlet does not exceed 10 amperes 9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill any kind of liquid on the product 10 Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous vol
11. justment in PC Source Sts USS TT 5 6 lt VOL Adjust the volume Adjust menu settings 7 IR Sensor Remote controller sensor 8 POWER ON OFF Turns the power ON or OFF There will be a few seconds delay before the display appears The power LED next to the power switch lights with green when the power is turned ON The power is turned off by pressing the power switch again and the power LED goes Red e OSD MENU DESCRIPTION A CUSTOM MENU Only Video mode Custom Custom Brighiess Contrast Color Tint Contrast Calor Tint Sharpness Sharpnass Brightness v Adowe Enter Tl Manu d Achat Press the MENU button and then up a down Press the up amp down button to select Custom sub button to select the Custom menu menu Press the left 4 right button to adjust picture setting Press the MENU button to save e Brightness Increase or decrease the intensity of the image e Contrast Increase or decrease the intensity lightness or dimness of the image e Color Increase or decrease the colour of the picture e Tint Increase or decrease the tint of the picture e Sharpness Increase or decrease the sharpness of the picture A CUSTOM MENU Only PC mode Move j E Emar T Menu F Adjust Men Press the MENU button and then up a down w Press the up a down w button to select Custom button to select t
12. long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in anyway such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Minimum distances e q 10cm around the apparatus for sufficient ventillation WARNING To reduce the risk of fire or electric shock do not expose the apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vaces shall be placed on the apparatus USER S MANUAL SAFETY INSTRUCTION Thank you for purchasing our product Before operating this product please read the instruction manual 1 Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 2 Do not use this product near water 3 Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product 4 Slots and openings in the cabinet and the back are provided for ventilation to ensure reliable operation of the product these openings must not be blocked by plac
13. n to save 40 aq USERS MANGA Oooo 3 OSD Tone Pinot Langumg Biva Seraen Key Lock Press the up 4 down button to select the OSD tone menu Press the right or ENTER button 4 Blue Screen Fasai Langungs OSD Tone Kay Lock Press the up a down w button to select the blue screen Press the right p or ENTER button 5 Key Lock Fasal Language O50 Tone Bius Sereen Press the up a down w button to select the key lock menu Press the right p or ENTER button 12 Fopgi Language Blue Screen Key Lock Press the up down button to select the desire OSD Tone Press the MENU button to save Renat Language Englrah DSO Tore Eius Kay Lock Of ae 4 Buel Press the up a down w button to select on or off Press the MENU button to save Rasai Larguage OSD Tons Blue Serean Press the up a down w button select on or off Press the MENU button to save USES MANGA Eo MOUNTING GUIDE Wall mountable using two methods 1 Using the 200 mm pre cut holes 2 Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall Wall D SUB CONNECTOR PIN ASSIGNMENTS e PIN ASSIGNMENTS Pin2 GREEN VIDEO Pint0 SIGNAL CABLE DETECT Pin3 BLUE VIDEO Pini1 GROUND Pin 4 SAD for DDC Pin5 GROUND Pin13 H SYNC or H V SYNC Pin
14. r terre eer eee er or 15 USER S MANUAL IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this aparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fie into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 2 oo 4 5 op lt x e e Se Se Se S N 8 A s 13 Unplug this apparatus during lightning storms or when unused for
15. tage points or other risks Refer all servicing to service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions e When the power cord or plug is damaged or frayed If liquid has been spilled into the product e If the product has been exposed to rain or water e f the Product does not operate normally when the operating instructions are followed Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore normal operation e If the product has been dropped or the cabinet has been damaged e If the product exhibits a distinct change in performance indicating a need for service USER S MANUAL CAUTION RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PER SONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of suffcient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTIO
Download Pdf Manuals
Related Search