Samsung P42HP User's Manual
Contents
1. 10 11 1 INFO Color Buttons 12 EILA TTX M Ix 18 STILL AUTO S MODE MDC LOCK SOURCE Introduction Turns the product On Turns the product Off Press to change the channel The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Pauses mutes the audio output temporarily This is dis played on the lower left corner of the screen The audio resumes if MUTE or VOL Is pressed in the Mute mode Selects the TV and DTV mode directly Opens the on screen menu and exits from the menu or closes the adjustment menu Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu TV channels provide written information services via tele text Teletext Buttons 04 02 08 080 05 0868 08 03 465 For more information gt TTX MIX Press the button once to freeze the screen Press it again to unfreeze Adjusts the screen display automatically in PC mode By changing the resolution in the control panel auto function is performed When pressing this button the current mode is displayed at the bottom centre of the screen The PDP Display has a built in high fidelity stereo amplifier Then press the button again to circle through available preconf2. You can adjust the bracket angle between 2 and 15 Make sure to use the top center and not the left or the right side of the product to adjust the angle Connections Connecting a Computer ea a Power cord with Earth e Inthe event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the PDP Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your PDP Display Connect the power cord for your PDP Display to the power port on the back of the PDP Display Turn on the power switch There are 3 ways to connect the D sub to your PDP Display Choose one of the following GDusing the D sub Analog connector on the video card e Connect the D sub to the 15 pin RGB port on the back of your PDP Display and the 15 pin D sub Port on the computer EBn the DVI Digital connector on the video card e Connect the DVI Cable to the DVI port on the back of your PDP Display and the DVI port on the computer Euin the BNC Analog connector on the video card Connections e Connect the BNC Cable to the BNC COMPONENT IN R G B H V ports on the back of your PDP Display and
3. the 15 pin D sub Port on the computer Connect the audio cable for your PDP Display to the audio port on the back of your computer E Note e Turn on both your computer and the PDP Display e The DVI cable or BNC cable is optional e Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices ea a Power cord with Earth e Inthe event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the PDP Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your PDP Display Connecting AV Devices 1 Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the PDP Display 2 Then start the DVD VCR or Camcorders with a DVD disc or tape inserted 3 Select AV using the SOURCE Note The PDP Display has AV connection terminals to connect AV input devices like DVDs VCRs or Camcorders You may enjoy AV signals as long as the PDP Display is turned on Connections Connecting to a Camcorder 4 Locate the AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables betw
4. the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The PDP Display is using its power management system Press any key on the keyboard The PDP Display is using its power management system Press any key on the keyboard The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the PDP Display and the computer to en sure that the connector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A 7 PF O Q A No sound Ensure that the audio cable is firmly connected to both the audio in port on your PDP Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound level is too low Check the volume level lf the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q The remote control buttons do not respond 7 2 n p F Troubleshooting Check the polarities of the batteries Check if the
5. Connect a set of audio cables between the AV COMPONENT AUDIO IN L AUDIO R on the PDP Display and the AUDIO OUT jacks on the Set Top Box Note e Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the PDP Display or on the remote control Note e For an explanation of Component video see your Set Top Box owner s manual Connections Connecting Using a HDMI Cable Note e Input devices such as digital DVD are connected to the HDMI IN terminal of the PDP Display using the HDMI cable e You cannot connect a PC to the HDMI IN terminal Connecting Using a DVI to HDMI Cable Note e Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the PDP Display using a DVI to HDMI cable e Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the HDMI PC DVI AUDIO IN terminal of the PDP Display Connecting to an Audio System VO Connections Note e Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT L AUDIO R on PDP Display Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and t
6. Fr amp i A 7 cok ta a ig ma i a i ar 2 pe P i By we ler a To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product 2 Insert the screw B into the plastic hanger th OF A Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes Introduction e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket A PDP Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 20 poun pes ee 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Introduction Note
7. P42HP P50HP Introduction Package Contents Note Please make sure the following items are included with your PDP Display If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking PDP Display Manuals Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Cables D Sub Cable Power Cord Others Remote Control Batteries AAA X 2 Ferrite Core for Power Cord Introduction Others Not available in all loca tions Sold separately DVI Cable Wall Mount KIT TV tuner box NetWork Box BNC Cable ZF Note 3301 001305 LAN Cable m Semi Stand KIT e You can purchase and connect a separate network box or TV tuner box For information on how to use these refer to their respective user manuals e You can only connect one external box Ferrite Core Power Cord e The ferrite cores are used to shield the cables from interfer ence around the cable near the plug e When connecting a cable open the ferrite core and clip it Introduction Your PDP Display Front 1 2 3 SOURCE Ce MENU VOL SOURCE button SOURCE Switches from PC mode to Video mode Changing the source is only al lowed for external devices that are connected to the PDP Display at the time PC DVI AV HDMI Magicinfo TV BNC Com ponent Note e The TV menu is available when a
8. TV tuner box is installed e The Magiclnfo menu is available when a network box is installed Enter button Activates a highlighted menu item MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu VOL Moves from one menu item to another horizontally or adjusts selected menu values When OSD is not on the screen push the button to adjust volume lt ASELV Moves from one menu item to another vertically or adjusts selected menu values When OSD is not on the screen push the button to adjust channel Power button Use this button for turning the PDP Display on and off Rear Introduction Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your PDP Display OFF when it is not needed or when leaving it unattended for long periods Remote Control Sensor Aim the remote control towards this spot on the PDP Display Note For detailed information concerning cable connections refer to Connecting Cables under Setup The PDP Display s configuration at the back may vary slightly depending on the PDP Display model 1 POWER The power cord plugs into the PDP Display and the wall plug Introduction B BNC COMPONENT OUT R Pp G Y B Pg H V BNC Component Co
9. batteries are empty Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity Problems related to Magiclinfo Note Making a Bootable USB Flash Disk Q amp A Q A Making a Bootable USB Flash Disk 1 You can turn a common 512 MB or bigger USB storage media into a bootable disk using a USB bootable disk creation tool For example the HP USB Disk Storage For mat Tool 2 Copies the OS ghost image and executables to your USB disk 3 Enter the BIOS menu of your set by pressing the F2 key in the BIOS logo screen Then enable the USB Boot First option by selecting that option and pressing the Enter key in the Boot menu 4 Switch your set on while your USB disk is connected and boot up in DOS mode 5 Run C ghost exe and choose Local Partition From Image from the menu Choose the ghost image to update your USB disk with and choose the target disk 6 When the ghost image update finishes the set will be rebooted automatically How can change the frequency The frequency can be changed by reconfiguring the video card Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can Adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Set tings Windows ME 2000 S
10. bracket to adjust the length A Length between the two locking holes 3 Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A a x i os f 2 a AT Cal i U gai P ed p te 4 r 1 el i IAW e S a pe s mT To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same Introduction 1 Remove the 4 screws on the back of the product 2 Insert the screw B into the plastic hanger Oh OF A notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket In
11. ce The locking device has to be purchased separately The appearance and locking method may differ from the illustra tion depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be different depending on its model Using the Anti Theft Kensington Lock 1 Insert the locking device into the Ken sington slot on the Monitor Oana turn it in the locking direction 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object See Connecting Cables for further information regarding cable connections Remote Control Note Introduction The performance of the remote control may be affected by a TV or other electronic device operating near the PDP Display causing a malfunction due to interference with the frequen cy SAMSUNG E 31 SGEeeeeeeseeseeseegeeeeseoeecae se qoqgdqoendoddo 6d POWER J OFF Number Buttons DEL button VOL K MUTE TV DTV Fd MENU L i INFO Color Buttons ELA TTX MIX STILL AUTO S MODE MDC LOCK SOURCE ENTER PRE CH v CH P A D MENU GUIDE RETURN Up Down Left Right buttons J EXIT srs Magiclnfo P MODE H DUAL MTS PIP SWAP 1 POWER 2 0 Off 3 Number Buttons 4 DEL button 5 VOL 6 K MUTE 7 TV DTV 8 a MENU 9
12. data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes Check if the resolution and frequency set for the computer video card falls in the range supported by the PDP Display If not reset them referring to the current Information under the PDP Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the PDP Display If not reset them referring to the current Information under the PDP Display menu and Preset Timing Modes The image is too light or too dark Adjusts the brightness and contrast Refer to the Brightness Contrast O O gt Oo gt O09 F OF OC Troubleshooting The screen color is inconsistent Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white is poor Adjust color using Custom under OSD Color Adjustment menu The Power Indicator blinks The PDP Display is currently saving
13. e recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner x They may cause flaws or deformation of the screen z surface e The user will be required to pay costs and related expenses for repairing damages caused Symptoms and Recommended Actions Note A PDP Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the PDP Display to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 Ifyou installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 50 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel gt System gt Device Admin istrator and then reboot
14. een the AUDIO OUTPUT jacks on the camcorder and the AV COMPONENT AUDIO IN L AUDIO R on the PDP Display Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the PDP Display Select AV for the Camcorder connection using the Source button on the front of the PDP Display or on the remote control Then start the Camcorders with a tape inserted Note The audio video cables shown here are usually included with a Camcorder If not check your local electronics store If your camcorder is stereo you need to connect a set of two cables Connecting a DVD Player Connect a set of audio cables between the AV COMPONENT AUDIO IN L AUDIO R on the PDP Display and the AUDIO OUT jacks on the DVD player Connect a Component cable between the BNC COMPONENT IN Pp Y Pg port on the PDP Display and the Pp Y Pg jacks on the DVD player Connections Note e Select Component for the connection to a DVD player using the SOURCE button on the front of the PDP Display or on the remote control e Then start the DVD Player with a DVD disc inserted Note e A component cable is optional For an explanation of Component video consult your DVD manual Connecting a DTV Set Top Box Note e The connections for a typical Set Top Box are shown below 1 Connect a Component cable between the BNC COMPONENT IN Pp Y Pg port on the PDP Display and the Pp Y Pg jacks on the Set Top Box 2
15. et the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving function Windows XP Troubleshooting Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual A Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual Q _Howcan clean the outer case PDP Panel Disconnect the power cord and then clean the PDP Display with a soft cloth using either a Cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the PDP Display How can play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer
16. he PDP Display 2 Unplug the video cable from the back of the computer 3 Turn onthe PDP Display The figure shown below Check Signal Cable appears on a black background when the PDP Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen Samsunga Check Signal Cable PC 4 Turn off your PDP Display and reconnect the video cable then turn on both your com puter and the PDP Display If your PDP Display screen remains blank after using the previous procedure check your video controller and computer system your PDP Display is functioning properly Warning Messages You can even view the screen at a resolution of 1360 x 768 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time And if the resolution is more than 85Hz you will see the black screen because the PDP Display does not support over 85Hz Not Optimum Mode Recommended Mode A A XK e GBOHF Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the PDP Display Maintenance and Cleaning 1 Maintaining the PDP Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting e Donotuse benzene thinner or other flammable sub stances or a wet cloth ist W
17. igured modes Standard Music Movie Speech Custom MDC Quick Launch Button Activates or deactivates all function keys on both the remote control and the PDP Display except for the Power and LOCK buttons Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time 19 E ENTER PRE CH 20 WCH PA 21 D MENU 22 GUIDE 23 2 RETURN 24 Up Down Left Right but tons 25 ff EXIT 26 srs 27 Magiclnfo 28 P MODE 29 HI DUAL MTS 30 PIP Introduction This button is used to return to the immediately previous channel In TV mode selects TV channels DTV menu display Electronic Program Guide EPG display Returns to the previous menu Moves from one menu item to another horizontally vertically or adjusts selected menu values Exits from the menu screen Selects SRS TruSurround XT mode Magiclnfo Quick Launch Button When you press this button current picture mode is dis played on the lower center of the screen AV HDMI TV Component P MODE The PDP Display has four automatic picture settings that are preset at the factory Then push button again to circle through available preconfigured modes Dynamic Standard Movie Custom PC BNC DVI Magicinfo MagicBright is a feature providing the optimum viewing en vironment depending on the contents of the image
18. nnection Terminal Output BNC Analog PC Connection connecting the R G B H V ports Component Connection connecting the Pp Y Pg ports BNC COMPONENT IN R Pg G Y B Pg H V BNC Component Connection Ter minal Input Rs232C OUT IN RS232C Serial PORT MDC Multiple Display Control Program Port DVI PC HDMI IN DVI PC HDMI AU DIO IN PC DVI HDMI Audio Connection Terminal Input pviy PC HDMI IN HDMI Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI ca ble pvi PC HDMI IN RGB PC Video Connection Terminal Using a D Sub Cable 15 pin D Sub PC mode Analog PC 8 DVI PC HDMIIN DVI PC Video Con nection Terminal Using a DVI Cable DVI D to DVI D DVI mode Digital PC oc OUT 5V 1 5A d Connect this to the POWER connector of a TV tuner box or network box D avin VIDEO Note Introduction Connect the VIDEO terminal of your mon itor to the video output terminal of the exter nal device using a VIDEO cable AV COMPONENT AUDIO IN L AUDIO Al Connect the port of the DVD VCR DVD DTV Set Top Box to the L AUDIO R port of the PDP Display aupio out L AUDIO F Headphone output terminal Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public pla
19. t or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product Introduction Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Wall Bracket Assembly iy Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right 2 Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length Q S fie Bike a jj w Pai Introduction A Length between the two locking holes 3 Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A i Laa j a ai 1s ligt y Pol i la a er amp a z Ks p P ES e ne T i 4j E Bi ioe
20. the computer to reinstall the Adaptor video driver Check List Note e The following table lists possible problems and their solutions Before calling for assis tance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer e For more network related information refer to the Magiclnfo Troubleshooting section Problems related to the Installation PC Mode Note Problems related to the PDP Display installation and their solutions are listed Q The PDP Display screen flickers A Troubleshooting Check if the signal cable between the computer and the PDP Display is securely con nected Refer to Connecting a Computer Problems related to the Screen Note Problems related to the PDP Display screen and their solutions are listed Q A gt gt O F F DO gt O FP FF O The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the PDP Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the
21. tion at customer s discretion Dimensions Introduction A Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product A T J ty A 4 i vi ai oo i N a a SS Wry Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall ir Ww ka ii 4 f ae yt I i Nis 4 k K ias i a fee 2 E J gi ES i l 4 J I ii F I i U l La i There are two hinges left and right Use the correct one Introduction A Captive Screw B Wall Bracket C Hinge Left D Hinge Right 2 Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall
22. troduction A PDP Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 2 0 5 0 m 3 2 0 1 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15 Make sure to use the top center and not the leftor the right side of the product to adjust the angle Introduction Mechanical Layout P50HP Mechanical Layout NETWORK MODEL SIZE a PDP Display Head NETWORK MODEL SIZE Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the PDP Display Introduction e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions MA Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the produc
23. you are watching Then push button again to circle through available preconfigured modes Entertain Internet Text Custom DUAL STEREO MONO DUAL DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV MTS You can select MTS Multichannel Television Stereo mode Audio Type MITS S Mode Default FM Stereo Mono Mono Manual Stereo Mono Stereo Change SAP Mono SAP Mono Every time you press the button a PIP screen appears This fuction does not work for this PDP Display Introduction 31 SWAP Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window This fuction does not work for this PDP Display Mechanical Layout P42HP Mechanical Layout NETWORK MODEL SIZE Introduction PDP Display Head NETWORK MODEL SIZE Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the PDP Display e SAMSUNG is not responsible for any product damage or any injury caused by installa
Download Pdf Manuals
Related Search