Q-See QSD004 Technical Manual
Contents
1. met mme V Se ee me ee e ee ee ee e ee ee Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 3 Installation optional 3 1 Installing Hard Drive 1 Unplug the power supply Don t install or uninstall HDD when DVR is on 2 Carefully open the DVR case 3 Connect the power cord and data cable to hard disk drive The 4 pin connection is the DC power cable for HDD and the wider cable is the standard hard drive IDE type connection Make sure the HDD is set as MASTER according to the hard drive manual 4 Carefully replace the case cover 3 2 Connecting Camera and Monitor There are 4 camera inputs and 1 video output with BNC connectors Refer to 2 2 Rear Panel Attach the cable from each of the cameras to one of the BNC video input ports Attach a RCA video cable not included to the video out put port on the DVR using a RCA to BNC adapter included and to a RCA video in port on the TV 3 3 Connecting Power Supply Please only use the power adapter supplied with the DVR The standard power supplied to the DVR is DC 12 Volts 3 Amps Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 4 System Boot 4 1 Detecting Installed Hard Drive After connecting the power the system will boot up and detect the installed hard Checking HDD drive MASTER On the screen it will show the hard drive information 4 2 Recovering Lost Dat2. Q 8ee QSD004 User s Manual Power Cord Power Adaptor User s Manual The shape of the plug might be different for different countries or regions CD R ro i we AG CD ROM Remote Controller USB Cable 18 Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Q SEE Product Warranty Thank you for choosing our products All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date and a free exchange service within one month valid for manufacturing defects Permanent upgrading service is provided for the software Liability Exclusions Any product malfunction abnormalities in operation or damage caused by following reasons are not within the free service scope of our company Please select payable service 1 Equipment damage caused by improper operation 2 Improper environment and conditions in on which the equipment operates e g improper power environment temperature humidity and lightening strike etc that cause equipment damage 3 Damage caused by acts of nature earthquake and fire etc 4 Equipment damage caused by the maintenance of personnel not authorized by our company 5 Product sold over 12 months ago In order to provide various services to you please complete registration procedure after you purchase the product Cut off or copy User s Information Card and fax or mail it to us afte
3. 4x30 frames second Display Frame Rate 100 frames second 4x25 frames second NTSC Max 30 fps Quad Recording Frame Rate NTSC _ pe Q Max 25 fps Quad Quad Mode Each Channel NTSC Max 30 frames s Total Recording Frame Rate 30 fps Number of Cameras Each Mode Each Channel PAL Max 25 frames s Total mm i fps Number of Cameras Record Record Mode Continuous Time Schedule Motion Triggered dd NTSC 720x480 GE PAL 720x576 Resolution Bund NTSC 320x112 640x224 Quad 640x224 total oe PAL 320x136 640x272 Each 640x224 Low 12K Byte Video Compression Format Normal 15K Byte Motion JPEG 12 20K bytes frame High 20K Byte HDD Support Over 500G Byte ATA 100 Interface 120GB Hard drive 7 frames per second Normal Quality Estimated Record Length 120x1024x1024 Kbyte 7x15x60x60 332 Hours For PC playback amp backup USB 2 0 Time Date Event Search Full Screen Dimension LxWxH 250 x 235 x 38mm 10 x 9 25 x 1 5in hae Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 10 Appendix 10 1 System Connection Diagram Note refer to 2 2 Rear Panel on page 2 for connections gt amp gt rs ww Camera 2 lt gt Gamer a 3 gt lt gt Camera 4 Gamer a 1 roo am ar an ar om arr err e ar acute Digital Video Recorer n TV or Monitor mme cc 10 2 DVR Accessories included
4. 5 7 Schedule Set You can set the video recording method by Time and Motion Detection Triggered Recording No Recording To TYMTTTTTTUMTTTT dv T Time System Default bg M Motion Detection Triggered AUp and WDown To move the cursor SEL To modify record method SCHEDULE SET PRESS UP DOWN ENTER SELECT PRESS MENU TO EXIT Numbers along middle indicate the 24 hours of a day For example If you want to record by motion detection during 3am to 6am please set the time points 3 4 5 6 from to be M if you want to continuously record during 7am to 12 noon please set the time points 7 8 9 10 11 12 to be T Both of the two recording methods need to be triggered by pressing REC button After pressing REC button if the schedule is set to be T at that time DVR will start to record immediately if the schedule is set to be M DVR will not start record until motion is captured and detected by system Force Record When DVR is set to record by motion detection DVR will not record if there is no motion If you want to record immediately please press REC button and hold for 3 to 5 seconds DVR will start force record Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 8 Miscellaneous Menu Auto Record When the function is set to ON DVR will be awaked to record automatically by record schedule if DVR is without any manual
5. SEL to adjust sensitivity of AMES motion detection on each channel CHANNEL 4 High 1 9 OFF Low PRESS UP DOWN ENTER SELECT When it s OFF the channel cannot PRESS MENU TO EXIT be triggered by motion AREA SET Use AUp and WDown buttons to select the channel you want to modify press SEL button to enter the sensitive area of each camera The picture of the selected channel is divided into 144 12 12 blocks press REW to move lett press FWD to move right pressLAUp and WDown to move the cursor up and down press ASEL to set the block active or not When the block is transparent it s active to record When the block is covered by shadow it 18 not active and motion in this area will NOT be detected Make sure Record Schedule is set to Motion for the times required Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 15 Video Mode Select NTSC or PAL video source 5 16 Factory Reset Press SEL button to reload factory defaults then the DVR will reboot all custom settings including password will be restore to factory default Caution There is no confirming dialog box for this selection after you press SEL button please be patient If you forget your password please keep the system on main screen and then press Pause button ten 10 times the DVR will reset the system Then the default password will be CH1 button six 6 times If t
6. operation in five 5 minutes When you choose OFF DVR will not record until you press the REC button 5 9 Miscellaneous Menu Password Enable When this option is set to be ON you will be required to enter the password if you want to stop recording or enter menu System default password Press CH1 button six 6 times 5 10 Miscellaneous Menu Password Change All keys can be used as a CURRENT PASSWORD password key except the MMenu key which is used to exit NEW PASSWORD CONFIRM PASSWORD If you forget your password please refer to 5 16 Factory Reset 5 11 Miscellaneous Menu Color Set HUE 0 99 SATURATION 0 99 CONTRAST 0 99 BRIGHTNESS 0 99 AUp and WDown move the cursor a TW TESA REW Decreases value Og i Kaa i ea FWD Increases value ga GHTNESS AL i BASS Pir ee CH1 CH4 QUAD Select channel j dri CH4jQUAD SELECT CHANNEL MMenu Exit SMOVE lt lt gt gt ADJUST MENU EXIT Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 12 Miscellaneous Menu Time Set TIME SET V 2008 08 08 20 08 08 PRESS UP DOWN ENTER SELECT PRESS MENU TO EXIT 5 13 Hard Disk Set HARD DISK SET OVERWRITE ENABLED YES HDD SIZE 120042MB HDD USED 80865MB 77 HDD FORMAT PRESS UP DOWN ENTER SELECT PRESS MENU TO EXIT HDD SIZE Configure system date and time AUp and WDown move the cursor SEL modify the valu
7. Press PPlay button to play the latest recording During playback press the ERiMenu button to list all recorded video clips from the hard drive Newest video will be listed at the top Press AUp and WDown to move the cursor and select an event press PPlay button to start playback 2008 08 08 08 08 08 2008 08 08 20 08 08 01 TIME 2008 08 08 20 00 00 02 TIME 2008 08 08 19 05 55 03 MOTION 2008 08 08 16 22 16 04 MOTION 3 2008 08 08 13 22 16 gt 05 TIME 2008 08 08 10 03 30 MULE 2008 08 07 20 18 39 07 TIME 2008 08 01 09 34 43 08 FORCE 2008 08 01 00 00 16 UP DOWN MOVE PLAY PLAY MENU EXIT FF SELECT MODE gt gt CHANGE SELECT 1 Starting time of the event 2 TIME continuous recording 3 MOTION Motion Triggered event 4 FORCE Force Record event 5 marks un played video recording You can also play recorded video by searching exact date and time using the following steps 1 Press FWD button to change the select mode 2 Press AUp and WDown button to select date starting time or ending time 3 Press 4SEL to edit time value 4 Press PPlay to play the video 2008 01 08 08 30 32 2008 01 08 16 00 05 Search Date and Time 14 Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 8 USB Programming By connecting the DVR to a PC you can use PC Viewer software to play back and backup DVR recorded video through the USB 2 0 port 8 1 PC Vi
8. Q See QSD004 User s Manual Contact US Q see Products 8015 E Crystal Dr Anaheim CA 92807 Website http www q see com Customer Service Phone 877 998 3440 x 538 Email cs dpsi usa com Tech Support Phone 877 998 3440 x 539 Email ts dpsi usa com Fax 714 998 3509 Rev 022208 Downloaded from www Manualslib com manuals search engine 1 DVR Features rrarnerernonernrnonernenennnnenennenennnnenennnnennnnenennenene 2 Layout D Morel apps 2 2 Rear Panel r erassassassnssnennsnssnssnvsnssnssnsnnsnntnnsnnsnesnssnssnssnssnssnssnsnesnesnesnesnssnen AR Remote Control smsrssnsrnsrssrsvrtsarsnrsnsnnrnnrnvsnssnssnssnssassnssnssnsnssnesnernesnssnen 3 Installation 3 1 Installing the Hard Drive ssesseseeseesvessesseesresrensensensenvenvensessesseeneenss 3 2 Connecting Camera and MonitoOr esesesesesresresvesvessessesseessene 3 3 Connecting Power Supply nnnnannnnnannnnnannnnnsenne 4 System Boot 4 1 Detecting Installed Hard Drive mseessessvesvesvenvenvenvenvensessessessesneenss 4 2 Recovering Lost Data seesreseesvesvesvervessersessresrenrenvenvenvenvensessesseeneense 4 3 Restore Recording Feature smessesrsressessessresresrenrenvenvensensessesseeseenss 4 4 Main Screen s sesesvevesesesvsvevesenennevesenennnvevenennvvenenennvvenenenesnenevenennnvenenennnnene 5 DVR Setup 5 1 SEM eee eee ee eee eee 32 Camera Select mmssersesvesesvesesvevenrvvenevvenenvevennvvennvve
9. SET stop recording first MOTION SET VIDEO MODE FACTORY RESET AUp and WDown move the cursor PRESS UP DOWN ENTER SELECT ASEL select modify settings PRESS MENU TO EXIT FAMenu press again to exit 5 2 Camera Select The DVR system can display 4 camera feeds in one picture Quad Mode You can configure which cameras are displayed Press ASEL to modify setting or press CH1 CH2 CH3 and CH4 to select each channel separately 2008 08 08 08 08 08 If a channel is disabled the system will display OFF on the monitor and this channel will not be selected to record Refer to 5 3 Record Select 5 3 Record Select Configure which channels you want to record Note If no channels are selected an error message will appear briefly on the screen when record is selected Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 4 Resolution There are two resolutions for video recording EACH Mode The DVR compresses and records each video channel separately so you can enlarge a single channel to full screen display and still be recording on all channels You can also record on specific channels for example you can turn off the recording function of CH1 and CH2 and then the system will only record video on CH3 and CH4 Press CH1 CH2 CH3 and CH4 to enlarge relative channel to full screen display In EACH Mode you can use the Auto Switch Function Auto S
10. a RECOVER HDD 04811 101735 A power error can cause data to be lost SPM SG and the DVR system can automatically recover lost data after power is reconnected 4 3 Restore Recording Feature Power Error Detected If a power error occurs during the Restore Hard Disk Master OK recording process the system will Restore REC Mode automatically resume recording after power is reconnected Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 4 4 Main Screen While the DVR is running the monitor will display the information from the cameras as follows Upper left Percentage of space used on hard drive Middle Channel number CH1 through CH4 Bottom right Date and Time A hd at RS Bottom left System status Refer to 6 1 EACH REC M lt T gt 2008 08 08 20 08 08 vi SES Start Recording Chapter 5 DVR Setup 5 1 Setup Menu Menu Directory CAMERA SELECT RECORD SELECT RESOLUTION RECORD FRAME MAIN RECORD QUALITY MENU SCHEDULE SET AUTO RECORD PASSWORD ENABLE MISCELLANEOUS MENU PASSWORD CHANGE HARD DISK SET COLOR SET TIME SET MOTION SET VIDEO MODE FACTORY RESET Downloaded from www Manualslib com manuals search engine QSD004 User s Manual HAM Menu enter system menu MAIN MENU CAMERA SELECT RECORD SELECT Note If you are recording to enter RESOLUTION Lee AE Menu you need to push stop button to SCHEDULE SET MISCELLANEOUS MENU HARD DISK
11. e Ei Menu exit and save OVERWRITE ENABLED If you choose YES recording continues and overwrites oldest previous recordings when the hard drive is full If you choose NO the recording process will stop when the hard drive is full Indicates the total capacity of the hard drive installed in the DVR HDD USED Indicates the space used on the hard drive and the percentage of hard drive space being used HDD FORMAT If you format the hard drive it will erase all the data on the hard drive You need to input your password when you want to format the HDD Note When you install a new hard drive in the DVR you use this function to format the hard drive Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 14 Motion Set MOTION RECORD TIME This number indicates how many enes seconds the motion detection recording continues after a motion triggered event MOTION RECORD TIME 10 MOTION ALARM TIME OFF ends spd MOTION ALARM TIME PRESS UP DOWN ENTER SELECT This number indicates how many Sue ee seconds the buzzer inside the DVR will sound after the DVR has been triggered by motion CONT Continuous alarm until press any key to stop OFF No alarm MOTION SET MOTION DETECTION SET SENSITIVITY gt CHANNEL 1 SENSITIVITY Use AUp and WDown button to CHANNEL 2 SENSITIVITY CHANNEL 3 SENSITIVITY select the channel you want to modify CHANNEL 4 SENSITIVITY SEE press
12. ewer Program 1 Put the USB Driver Program CD into your CD ROM Drive 2 Open CD directory 3 Double click on the PC ViewerlInstall exe file to install the PC Viewer software 4 Run the installed PC Viewer program PC Viewer will detect the hard drive installed inside DVR automatically when you connect the USB cable from DVR to PC 8 2 Program buttons NYR SYSTEM NO O RK Q N Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Item Remark nm Jama 5 DVR event list Open event list recorded in DVR 6 DVR Mode To switch working mode between PC viewer 7 PC Mode mode and DVR viewer mode 8 Channel selection keys CH1 CH2 CH3 CH4 QUAD 9 Playing scroll bar 10 Fast reverse Play backward at fast speed 11 Previous frame Move to previous frame 12 Reverse Play backward at normal speed 17 Volume scroll bar 18 Exit Exit PC Viewer DVR Mode play video clip save in DVR s HDD PC Mode play video clip mys file save in PC 8 3 PC Backup Press F button to open the DVR recorded event list and then select an event press M to start backup The video file you want to save in PC can be avi file or mys file Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 9 Specifications ITEM DESCRIPTION NOTE Camera Input Channel 4 channel Composite BNC NM Video Output Channel 1 channel Composite BNC oS NTSC 120 frames second
13. he DVR is recording please unplug the power supply and uninstall the HDD then connect power to boot DVR and press Pause button for ten 10 times Chapter 6 Recording 6 1 Start Recording Press REC to start recording as set in 5 7 Schedule Set DVR will display system information on screen LEES T VE w wz wii y 2 SR n T 5 ms M m 2008 07 01 16 22 30 Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Hard Drive Usage Displayed as a percentage Recording symbol channel is currently recording Channel Number Record Resolution QUAD or EACH Status REC Play FF1 FF2 FF3 REW PAUSE HDD Info M Master Hard disk Record Schedule T Continuous M Motion Detection No Recording The date and time on the DVR ONOaAKR WD 6 2 Stop Recording Press Stop button to stop recording If you have already activated the password protection you need to input the password 6 3 Recording Time on Hard Drive Estimated record time based on a 120GB Hard Drive Quad Mode in hours 251 1748 NTSC 78 7 15 17 Cem om mene 3 Le Ti You can estimate recording hours by the formula 120 G Byte x 1024 M Byte x 1024 K Byte Divided by 15 Kbyte frame x 7 frame sec x 60 Sec x 60 min Estimated time would be 332 Hours Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 7 Playback
14. nennenennnvenenvenesvenensenes 5 3 Record Select sessresesveresvvvesnsvesesvevennnvenenvenesvevennvvennnveenseennevenenenens 5 4 Resolution msesvesesvresvevesesvevennvvennnvenesnenennvvenenvenennevennenennnvenensesensevenennenens 5 5 Record Fraine een IO R o GI 10 EE EEE 5 7 VNR 5 8 Miscellaneous Menu Auto Record 5 9 Miscellaneous Menu Password Enable 000 Downloaded from www Manualslib com manuals search engine 5 10 Miscellaneous Menu Change Password 0066 9 5 11 Miscellaneous Menu Color Set rrrrrnnnnnnnrrnnnnnnnnnnnnnnnre 9 5 12 Miscellaneous Menu Time Set rrrrrnnnnnnnnorrnnnnnnnnnnnnnn 10 al eo TDK Ne 10 5 14 Motion Setup sseessresressrssressrssrensessressessresressresressessessesssensessrensesseensennn 1 5 15 Video Mode nssesressessessensrnsrssrssnsasvssensensrnsrnsrssrsssssnesnessensensensensessssssenn 12 5 16 Factory Reset snvusesmnesssesessreseessreseessreseessrsssessresressessressessensen 12 6 Recording 6 1 Start Recording smesesreseessessresvessessrssvensessesseensensessesssessessesssessensesseenn 12 O2 LOD Ren 13 6 3 Recording Time on Hard Drive seesseeseessessessrenresvessessrensensesssenn 13 Te MANDAT 14 8 USB Programming rorrrrnnnnnnrrrnnnnnnnnernrnnnnnnnnernnnnnnnnenennnn 15 8 1 PC Viewer Program eessrnnnnnnnnnnnnnnnnnnrnnnnnnnnnnnnsnnnnnnnnnnee 15 8 2 Program Buttons rrrrrronnnnrrrrrnrrrnnnnnnnnrrnnnvnnnnnnnn
15. r the card is filled in You can also register the product by going to the www q see com website and clicking on the Register link Customer Information Card User s Name Mr Mrs Company Name Postal Address Postal code Phone Number E mail Model Number of Product Serial Number of Product Purchase Date Distributor 19 Downloaded from www Manualslib com manuals search engine
16. srnnnnnnnnner 15 Do9 PE oe DE 16 9 Specifications orrrnrornrorrrrnnnnnrrrrnnnnnnnnerrrnnnnnnnrrrnnnnnnnnenenenne 17 10 Appendix 10 1 System Connection Diagram orrronnnnnrnnnnnnnnnrrnnvvnnnnnnnne 18 10 2 DVR Accessories included rrrnrnnnnrnnnnvnnnvvnnnvennnvennnee 18 Q SEE Product Warranty esrrrrrrnrnnnnnrrrnnrrnnnnnerrnnnnnnnnnrsnnvnnnnnnenne 19 Downloaded from www Manualslib com manuals search engine QSD004 User s Manual Chapter 1 DVR Features 4 Channel BNC Camera Input I Channel BNC Video Output Video Source Option NTSC PAL Motion Detection with Sensitivity and Area Settings Time Schedule Recording Motion Triggered Recording One ATA 100 Hard Disk Interface USB 2 0 Back up to computer Remote Control Chapter 2 Layout 2 1 Front Panel IR Receiver MI Pauso 7 Pause Pwrwis Power indicator LED CA Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 2 2 Rear Panel 1 BNC video output 4 BNC video inputs Fan CAUTION To reduce the risk of electrical shock Do not open covers No user serv parts inside Refer servicing to qualified service personne WARNING To prevent fire or shock hazard Do n se units not specifically designed for outdoor use to rain or moisture Power Supply Input Grounding Terminal USB Port is located on the right side of the case 2 3 Remote Control Select or enlarge Channel 4 Be X V
17. witch Function When the system is in live mode or recording mode press the QUAD button and hold for three 3 seconds to make each video channel enlarge to full screen in sequence The full screen view of each channel will be displayed for three 3 seconds including Quad view The switch will last until any button is pushed For example Il Stop will stop the switch and may stop the recording depending on Record Schedule Settings 5 7 Schedule Set QUAD Mode The DVR will compress and record all 4 video channels into one file therefore you cannot enlarge a single channel to full screen in play back mode or live monitoring mode Auto Switch Function is not available in QUAD Mode 5 5 Record Frame Record frame will affect the movement of objects in recorded video More frames per second gives smoother movement and uses more hard disk space System default value is 30fps frames per second for NTSC PAL is 25fps which means the system will record 30 frames per second shared by all cameras You can set frame rate for NTSC to 30 15 10 7 5 4 3 2 I frames per second PAL is 25 12 8 6 4 3 2 1 Downloaded from www Manualslib com manuals search engine QSD004 User s Manual 5 6 Record Quality There are three levels of recording quality High Normal and Low Higher quality uses more hard drive space Record frame rate record quality and available hard drive space will all affect the total recording time of the DVR system
Download Pdf Manuals
Related Search