PYLE Audio PIWPD3 User's Manual
Contents
1. Universal Docking Station with 2 4GHz Wireless Speakers for iPhone iPod MODEL NO PIWPD3 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a set basement 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block the ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cord Protection Power supply cord2. from the unit to prevent damage or corrosion 13 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel moop LOCATION OF CONTROLS DOCKING STATION Front View Backside 101112 Bottom View REMOTE CONTROL 14 15 7 7 17 18 19 21 23 mi Volume Rotary Knob Power On Standby Speaker Charging Indicator light Function button Sa Speaker item Menu button Open button Press to detach the Mute button Speaker from the main base Skip Button Power on Indicator Remote sensor Play Pause button iPhone iPod Connector Aux In Jack Kee Combination dead bolt Repeat button Random Button UP button Enter button VOL Button VOL Button Down button 5 6 7 8 9 10 11 12 POWER SOURCES Power of Main Base The main base is operated by an external AC DC Power Adaptor with an output of 9V DC 2000mA included 1 Insert the adaptor s DC output plug into the DC IN jack on the back of the Main base 2 Plug the adaptor into a convenient AC wall outlet Power of Individual Speaker Each speaker has 1 built in rechargeable lithium battery for independent playback Before the first use we recommend to charge each speaker for 4 hours When speake
3. please refer to the following chart Symptom The base does not switch on no power Possible problem AC adaptor is not plugged into a wall outlet or the connector is not plugged into the DC jack on the back of the unit Wall outlet is not functioning Using no wrong iPod cradle Solution Plug the AC adaptor into a wall outlet and plug the connector into the DC jack on the unit Plug another device into the same outlet to confirm the outlet is working Make sure the dock cradle is the proper fit for your iPod iPod iPhone does not respond to the speaker system iPod iPhone does not charge up Speakers do not play the sound from docked device Sound is cut off or noisy Sound is distorted iPod iPhone is not installed properly Your iPod iPhone is locked up iPod iPhone is not installed properly iPod iPhone battery has problem Speakers receive signal from other devices or the other set of MW 1025A The unit experiences interference Sound source is distorted Volume level is set too high Remove your iPod iPhone from the dock and check for any obstruction on the connectors in the docking and on your iPod Then reseat it in the dock Please make sure that your iPod iPhone is working properly before docking into the unit Remove your iPod iPhone from the dock and check for any obstruction on the connectors in the docking and on your iPod Then reseat it in the dock Ple
4. ase make sure your iPod iPhone is working properly before docking into the unit Place the unit to a location where receive lesser external signal Do not turn on other wireless devices simultaneously If the source is iPod iPhone try to check the sound at personal computer before putting into the iPod iPhone If you are using an external sound source like digital audio player try reducing the output volume on the device itself Decrease the volume SPECIFICATIONS Power Supply Power adaptor included Input AC 100 240V 50 60Hz Output DC 9V 2A Power of remote control 1 xDC 3V CR2025 button cell included Wireless Transmission 2 4GHz The symbol opposite indicates that the electric and electronic components are the subject of a selective collection it represents a dustbin on wheels barred of a cross The electric and electronic products can contain substances having negative effects on the environment and health Worn they should not be thrown with domestic waste but to be imperatively recovered in the selective collections dump associations of social economy and interdependent The selection of waste decreases the potential effects on the environment and human health due to the substances dangerous which can compose certain components electric and electronic Take an active part to remove you not from the apparatuses with domestic waste Made for iPod Made for iPhone mean that an electronic accessory has b
5. dicator will turns on with red color if there is no an iPod or iPhone docked on the main base Note the power on indicator turns to red color means the docking station is in AUX IN mode 2 Connect an audio cable to the headphone or line out jack of an audio device and plug the other end into the Aux in jack located on back of the main base 3 Turn audio device on and play this device 4 Rotary the volume knob to choose a proper volume level When finished press and hold the Play Pause on the main base or press the Power on button on remote control to turn off the main base Remember to turn off the speakers and your audio device too VIDEO OUT FROM THE iPod iPhone 1 You can connect this unit to a television or other video display that has a composite video input 2 Securely dock your iPhone or iPod with video 3 Connect one end of an RCA cable not included to rear RCA video jack on the unit 4 Connect the other end of the RCA cable to VIDEO IN of television or video display 5 Press the FUNCTION button to select iPod iPhone mode 6 Select a movie from your iPod iPhone menu 7 iPod On the main menu choose video then select video setting 8 iPod Make sure the TV Out section is set to ON 9 iPod Switch back to the movie library and play the movie of your choice Note Video out will automatic when using an iPod touch or iPhone TROUBLESHOOTING GUIDE 0 0 OO Should you experience difficulties in the use of this player
6. een designed to connect specifically to iPod iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone may affect wireless performance iPhone iPod iPod classic iPod nano iPod shuffle and iPod touch are trademarks of Apple Inc registered in the U S and other countries
7. oximately 100 feet in the open area without any interference 5 Press and hold the Play Pause on the main base or press the Power on button on remote control turn off the unit SPECIAL TIPS Meanings of the Speaker Charging Indicator light 1 When the battery inside the speaker is charging and the volume knob is turned off the indicator light will be red color Once it is fully charged the light turns to green 2 When the battery inside the speaker is charging and the volume knob is turned on the indicator light will be purple color Once it is fully charged the light turns to blue 3 When the docking station is working and the speakers are separate from the main base the indicator light is blue When the battery level is low the sound of speaker will be weak once the battery is truly exhausted the speaker will stop working meanwhile the the indicator light turns off How to combine the speakers to main base 1 Insert the speakers into the main base make sure the direction marks R amp L on the bottom of the speakers match to the main base 2 Slide the Combination dead bolt to lock position How to separate the speakers and main base 1 Slide the Combination dead bolts to unlock position 2 Press the Open buttons to detach the speakers from the main base Using the Aux in Jack 1 Press and hold the Play Pause on the main base or press the Power on button on remote control to turn on the main base the power on in
8. r is placed on the powered base the main base was connected with the AC adaptor charging will start automatically The speaker charging indicator light will turn on with red color and it will turn green once the battery is fully charged no further charge is applied Power of Remote Control To use the remote control please ensure the remote control battery CR2025 included is installed properly and take the insulation clarity paper out Once you stop to use the remote control please Insert in it same as before Replace the remote control battery when it stops working It is highly recommended to use a good quality button cell Note Room lighting and battery life can affect the operating range of remote control ACCESSORIES 1 x AC adaptor 1 x Remote Control include button cell CR2025 1 x User manual 1 x Line in cable GENERAL OPERATION Ly 1 Select a proper docking adaptor enclosed when purchase an iPod and place it into the base no adaptor required if you use iPhone then dock your iPod iPhone gently 2 Plug the AC adaptor plug into DC IN Jack at the rear side of base the main base will be turned on automatically meanwhile the power on indicator turns on with blue color 3 Turn the speakers on to play your iPod iPhone 4 Rotary the volume knob to choose a proper volume level then you should now be able to take the speakers freely from room to room without disruption Subject to its surroundings appr
9. s should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet amp Cleaning The unit should be cleaned only as recommended See the section Care and Maintenance of this manual for cleaning instructions 7 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall outlet This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire of electric shock 11 Damage Requiring Service This unit should be serviced by qualified service personnel when The power supply cord or plug has been damaged Objects have fallen into or liquid has been spilled into the enclosure The unit has been exposed to rain The unit has been dropped or the enclosure damaged _ The unit exhibits a marked change in performance or does not operate normally 12 Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cord should be unplugged
Download Pdf Manuals
Related Search