Home

Panasonic AJ-HPX3700 Menu Information

1. the Gch and the Bch are set to 0 AWB A GAIN For setting the values of the Rch gain For adjusting the flare level of the Rch and the Bch gain when the auto white I Adjustment values in this item are added balance is executed as the WHITE BAL l to the flare adjustment value that is switch is in the A position l adjusted on lt LENS FILE ADJ gt screen ON To retain the values set in the items of R GAIN AWB A andB GAIN AWB A For adjusting the flare level of the Gch the Bch gain is set to 0 to the flare adjustment value that is adjusted on lt LENS FILE ADJ gt screen AWB B GAIN For setting the values of the Rch gain and the Bch gain when the auto white For adjusting the flare level of the Bch balance is executed as the WHITE BAL Adjustment values in this item are added switch is in the B position to the flare adjustment value that is ON To retain the values set in the l adjusted on lt LENS FILE ADJ gt screen items of R GAIN AWB B and B GAIN AWB B OFF The values of the Rch gain and Ifthe remote control unit is connected settings made from the the Bch gain is set to 0 menu are disabled The set value is displayed Menu Menu Description Tables 177 MATRIX COLOR CORRECTION Items Adjustable Items Adjustable Data Saved Range Data Saved Range IH MATRIX A For selecting the color correction table For performing the color saturation TABLE B for the linear matrix SAT correction of r
2. Adjustable Data Saved Range F2 8 ADJ ON The iris is only set to F2 8 when this item OFF set to ON Adjustment to F2 8 will be executed on the lens Items Adjustable teva Range Rema RB GAIN CTRL ON The gains of Rch and Bch adjusted in lt RB GAIN CONTROL screen are reset Furthermore the flare levels of Rch Gch and Bch that are adjusted on lt RGB BLACK CONTROL screen are reset The gains of Rch and Bch adjusted in lt RB GAIN CONTROL screen are enabled Furthermore the flare levels of BLACK SHADING Rch Gch and Bch that are adjusted on lt RGB BLACK Items Adjustable Data Saved Range OFF F16 ADJ ON The iris is only set to F16 when this item OFF set to ON Adjustment to F16 will be executed on the lens For compensating Rch sensitivity of the lens used CONTROL gt screen are enabled CORRECT On off switching for digital black shading compensation C U F R DETECTION Execute digital black shading DIG compensation WHITE SHADING Items Adjustable Data Saved Pange LENS B GAIN For compensating Bch sensitivity of the lens used LENS R FLARE 000 For adjusting the flare level of Rch On off switching for white shading compensation For adjusting the flare level of Gch For executing the white shading compensation manually The sawteeth shaped waveform and the For adjusting the flare level of Bch parabola waveform of the respective RGB channels ar
3. MATRIX TABLE B ele COLOR ON CORRECT OFF ENG lies V Note The items indicated by IM are the setting items for PAINT MENU SW R W in the lt SD CARD R W SELECT gt screen The items without are the setting items for PAINT MENU LEVEL R W Please refer to SD CARD R W SELECT page 201 for more information For selecting the color correction table for the linear matrix For switching on off of the 12 axis independent color correction ADDITIONAL DTL For changing the detail level of the high brightness portion Adjust the detail level toward upwards Adjust the detail level toward the downwards For setting the level for clipping the detail signals For setting the proportion of the RGB signal components that provide the detail For revising the master detail level Menu Menu Description Tables 181 SKIN TONE DTL Items Adjustable Items Adjustable Data Saved Range Data Saved Range mSKIN TONE FF For selecting the skin color table for Y MAX For setting the maximum value of DTL enabling the skin tone detail brightness for enabling the skin tone B The skin color table is provided in the I DETECT TABLE item By enabling the skin tone detail it is C possible to shoot human skin more F accurately For setting the minimum value of brightness for enabling the skin tone For the setting to display the zebra pattern in the skin tone area displayed in the viewfinder scree
4. NORMAL SLOW i 2 seconds A IRIS PEAK Determine the peak to standard ratio for j AV the auto iris About 3 seconds a A larger value sets the auto iris to SLOW2 i 7 respond to the peak in the iris detection About 10 seconds SLOW3 window while a smaller value sets it to cjo FIR E EER Ga to the average value in the C U F R For switching the detection area for A IRIS WINDOW Select the auto iris detection window executing the automatic adjustment of NORM1 white balance The window closer to the center An area near the screen center Af ih s ieen equivalent to 25 of the screen NORM2 l is detected The window closer to bottom of An area near the screen center the Scracn equivalent to 50 of the screen CENTR is detected M The spot window in the center of An area equivalent to 90 of the i ie i screen is detected l CUF C U F R C ll C U F R IRIS GAIN Select which unit controls IRIS GAIN CAM LENS 9 Note Lenses with an extender such as X2 X 0 8 sold before FUJINON DIGI POWER perform iris compensation while enabling the extender Therefore if this setting is switched to CAM the cameras iris control will not operate properly TEMP PRE SEL VAR For changing the detection area on SW 8 2K 5 6K which automatic white balance adjustment is performed VAR From 2300K to 9900KT is selectable 3 2K 5 6K The detection area is fixed to 3200K or 5600K COLOR TEMP 2300K For setti
5. For performing the vertical detail correction level setting For performing the noise elimination level setting for detail For performing the horizontal detail frequency selection For setting the LEVEL DEPEND When the Y detail is emphasized details of dark sections are compressed If the numerical value is larger details of bright sections are also compressed For setting the master gamma 0 01 step For setting the gamma curve for the dark portion 8 to 1 The dark portion is compressed OFF Standard state 1 to 8 The dark portion is extended Sees B GAMMA For setting the upper limit of RANGE compression expansion 1 Approximately 20 2 Approximately 30 3 Approximately 40 SC H ER IH VATRIX For selecting the color correction table TABLE a for the linear matrix SIC MER mMCOLOR ON For switching on off of the 12 axis CORRECT OFF independent color correction IBO BEE V Notes e The items indicated by IM are the setting items for PAINT MENU SW R W in the lt SD CARD R W SELECT gt screen The items without are the setting items for PAINT MENU LEVEL R W Please refer to SD CARD R W SELECT page 201 for more information Menu Menu Description Tables 179 e When shooting with the MASTER GAIN set to 3dB coloring phenomena may occur in portions of the video with high brightness The coloring phenomena can be reduced by switching the OUTPUT AUTO KNEE switch to CAM AUTO KN
6. MASTER Set the master gamma in 0 01 steps GAMMA Set the Rch gamma Set the Bch gamma ERE GAMMA MODE HD For selecting the gamma mode SEL HD Video gamma characteristics for ae HD High Definition FILMLIKE2 Fos ss FILMLIKE3 SD The gain in the dark section is FILM REC higher than the HD gamma VIDEO REC FILMLIKE1 In this setting gradations in highlit areas can be expressed better than the HD gamma FILMLIKE2 In this setting gradations in highlit areas can be expressed better than when FILMLIKE1 is selected FILMLIKE3 In this setting gradations in highlit areas can be expressed better than when FILMLIKE2 is selected FILM REC The cinema gamma characteristics for film applications VIDEO REC The cinema gamma characteristics for video applications Video level Luminance e When the GAMMA MODE SEL item is used for FILMLIKES3 the following settings are recommended MANUAL KNEE ON KNEE MASTER POINT 85 0 KNEE MASTER SLOPE 50 e AUTO KNEE is not performed when the GAMMA MODE SEL menu option is set to FILM REC or VIDEO REC 184 Menu Menu Description Tables AUTO KNEE is not performed when AJ RC10G is connected but the LED of the AJ RC10G button is lit by pressing the A KNEE ON button Items Adjustable Data Savea Range Remarks F REC For setting the dynamic range when DYNAMIC LVL GAMMA MODE SEL has been set to FILM REC When GAMMA MODE SEL has not been set
7. AP OP ee i A 0E E in 0 1 V steps indication in 0 1 V steps Enable selection under BATTERY NEAR END k E NEAR END voltage in 0 1 V SELECT i x Enable selection I Disable selection i Select auto or manual to set the NEAR EN i Set the END voltage in 0 1 V steps END voltage 13 AUTO Set voltage automatically MANUAL D Set voltage manually C U F dabu iki puisi e The remaining battery level is indicated in percentage t the NEAR END volt i S ae de a i i jas when a battery with this function is installed on the unit RECUS Menu Menu Description Tables 197 nueW MIC AUDIO1 Items Adjustable Items Adjustable Data Saved Range Data Saved Range FRONT VR CH1 OFF Select whether or not to enable the MICLOWCUT OFF Select the microphone low cut filter for FRONT AUDIO LEVEL control for the CH4 input CH4 3 signal selected as the input signal to OFF The microphone low cut filter is AUDIO IN CH1 disabled for any input Disabled for any input selected FRONT The microphone low cut filter is Recording level does not change enabled when the front by turning the volume control microphone is selected Only enabled when FRONT is L The microphone low cut filter is selected enabled only when the wireless L Only enabled when W L microphone is selected wireless is selected The microphone low cut filter is Only enabled when REAR is enabled only when the rear selected microphone i
8. V Note For a USB DEVICE mode errors occur even if the respective items of LENS FILE CARD R W are executed since it does not access an SD memory card Set PC MODE to OFF and then execute the operation again Items Adjustable Data Saved Range Read out the cinematograph setting Read out the data from the user area in the memory Select the scene file Fe eee ne IEE Reset the scene file values to the initial RESET values TITLE SCROLL 01 Scrolls through the scene files 12 me TaT E p a EE V Note For a USB DEVICE mode errors occur even if the READ USER DATA item is executed since it does not access an SD memory card Set PC MODE to OFF and then execute the operation again INITIALIZE Items Adjustable Dara Se Range Remarks READ FACTORY The menu MAIN MENU OPTION DATA MENU values are all reset to factory settings V Note The settings for the following are not reset to the factory set values e Scene file e User data e Lens file e Black shading data WRITE USER DATA the camera s internal memory Save the user preference menu data in V Note For a USB DEVICE mode errors occur even if the READ FACTORY DATA item is executed since it does not access an SD memory card Set PC MODE to OFF and then execute the operation again Menu Menu Description Tables 203 i MAINTENANCE The in the Adjustable Range column indicates the preset mode LENS ADJ LENS FILE ADJ Items
9. are the setting items for PAINT MENU LEVEL R W For performing the color saturation Please refer to SD CARD R W SELECT page 201 for correction of yellow more information e In the preset mode the linear matrix data of MATRIX TABLE B are all set to 00 x lt ve For performing the color saturation correction between yellow and red S 178 Menu Menu Description Tables PHASE Items Adjustable Data Saved Range R For performing the hue correction for red For performing the hue correction between red and magenta For performing the hue correction for magenta For performing the hue correction between magenta and blue For performing the hue correction for blue For performing the hue correction between blue and cyan For performing the hue correction for cyan For performing the hue correction between cyan and green For performing the hue correction for green For performing the hue correction between green and yellow For performing the hue correction for yellow For performing the hue correction between yellow and red For switching on off of the 12 axis independent color correction of the position selected with the GAIN switch L M H LOW SETTING Items Adjustable Data Saved Range IM MASTER GAIN Select the master gain from 3 0 3 6 l 9 12 15 18 21 24 27 or 30 dB For performing the horizontal detail correction level setting
10. 1 120 1 250 1 500 1 1000 1 2000 the frame rate can be varied while keeping the exposure constant This is eguivalent to Ramping compensating for changes in frame rate using shutter angle in a conventional film camera TEXT MEMO SW USER4 SW 192 Menu Menu Description Tables SW INH AUDIO CH1 AUDIO CH2 REC SW RET SW PRE REC SLOT SEL PC MODE AUDIO CH1 AUDIO CH2 REC SW RET SW PRE REC SLOT SEL PC MODE INH OVR S BLK B GAMMA Y GET DRS ASSIST C TEMP VFR FRATE VF GAM AUDIO CH1 AUDIO CH2 REC SW RET SW PRE REC SLOT SEL PC MODE INH Y GET ASSIST VF GAM REC SW RET SW PRE REC SLOT SEL PC MODE TEXT MEMO Items Adjustable Data Saved Range USER MAIN SW Allocate the USER MAIN button For descriptions of the functions see Assigning Functions to User Buttons page 59 Allocate the USER 1 button For descriptions of the functions see Assigning Functions to User Buttons page 59 Allocate the USER 2 button For descriptions of the functions see Assigning Functions to User Buttons page 59 Allocate the MARKER SELECT button For descriptions of the functions see Assigning Functions to User Buttons page 59 Allocate the TEXT MEMO button For descriptions of the functions see Assigning Functions to User Buttons page 59 SW MODE Items Adjustable Dara Savea Range Remarka RET SW R REVIEW For setting the function when the user CAM RET button on
11. BATTERY SETTING2 Data Saved Range x Enable selection under BATTERY i Items Adjustable SELECT Data Saved R Enable selection MaKe ange e Disable selection K Enable selection under BATTERY Select auto or manual to set the NEAR SELECT END voltage gt K Enable selection Disable selection AUTO Set voltage automatically MANUAL NEAR END 11 0 Set the NEAR END voltage in 0 1 V Set voltage manually steps When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps Set the END voltage in 0 1 V steps Enable selection under BATTERY END SELECT C U F gt K Enable selection Enable selection under BATTERY Disable selection SELECT Select auto or manual to set the NEAR Enable selection END voltage var Disable selection AUTO Set voltage automatically Set the voltage to display the FULL MANUAL indication in 0 1 V steps Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage NEAR END Set the NEAR END voltage in 0 1 V in 0 1 V steps g steps Enable selection under BATTERY END Set the END voltage ind 1V steps SELECT x Enable selection e Disable selection Select auto or manual to set the NEAR G U F END voltage AUTO Set voltage automatically Enable selection under BATTERY Set voltage manually i stones sae When MANUAL is selected in the FULL r FULL menu above set the NEAR END voltage s
12. DETECT ZEBRA 1 DETECT 0 Menu Menu Description Tables 185 nueW VF MARKER Items Adjustable Data Saved Range TABLE A Select the VF MARKER setting table B First select table A or B then set the items below for each table Bia CENTER MARK OFF Switch the center mark 1 OFF Do not display center mark 1 large 2 Hollow large 3 small 4 Hollow small C U F R SAFETY MARK OFF Select the frame type for the safety zone 1 OFF Do not display frame 2 1 Box Corner frame I L ZICU FIR SAFETY AREA 80 For setting the size of the safety marker i Itis possible to set the size by units of 1 with a fixed ratio between of width and height li Ka FRAME MARK ON OFF CUIRR FRAME SIG Set the frame marker to ON or OFF Set the frame marker The VISTA ratio is 16 8 65 1 85 1 The CNSCO ratio is 16 6 81 2 35 1 ill Ll FRAME LVL Set the level outside the frame marker Note that the level does not change on the LCD monitor 0 Eguivalent to signal off Blanking status 15 Same brightness as center area V Note The safety zone marker the safety zone area and the frame marker are not displayed on the LCD monitor if LT BOX is selected in DOWNCON MODE 186 Menu Menu Description Tables VF USER BOX Adjustable Range ON For setting whether the user box is OFF displayed in the viewfinder or not For setting the width
13. Display indicating whether proxy recording is to be performed on the P2 card only or on both the P2 card and the SD memory card Proxy recording information is not displayed ESE MODE CHECK IND Items Adjustable Data Saved Range STATUS OFF For the setting to display the status screen when the MODE CHECK button is pressed For the setting to indicate causes for turning on the O lamp on the viewfinder is displayed when the MODE CHECK button is pressed The causes for turning on the O lamp are displayed with fj For the setting to display the FUNCTION screen when the MODE CHECK button is pressed For the setting to display the AUDIO screen when the MODE CHECK button is pressed For the setting to display the CAC screen when the MODE CHECK button is pressed For selecting whether to display the functions assigned to the user switches or if some of the switch operations are locked or not when in MODE CHECK BoD BEM S For the setting to display the status screen immediately after turning on the power of the unit V Note Even if it is set to ON in this item the status screen is not displayed immediately after turning on the power of the unit when the STATUS item is set to OFF ILED Items Adjustable Data Saved Pange GAIN 0dB For the setting to turn the O lamp on the viewfinder on when the GAIN is settoa value other than 0 dB For the setting to turn the O lamp on the O
14. GL95 a battery made of Sony is used set this to BP L65 95 Set the remaining capacity detection type when a battery is connected to the DC IN connector Remaining capacity detection is also performed according to the selected battery type The variable range is changed by the item settings selected on the BATTERY SETTING1 page 196 and BATTERY SETTING2 page 197 menus Analog voltage is displayed on the viewfinder screen When BP GL65 or BP GL95 a battery made of Sony is used set this to BP L65 95 Select whether or not to set the alarm to beep when the battery level is low If set to ON the warning tone and indication can be canceled by pressing the MODE CHECK button when BATT NEAR END ALARM is triggered Select whether or not to set the alarm to beep when the battery is empty Set the display of the remaining battery level indicator bar in the display window when a battery with this function is used 70 Indicate FULL at 70 capacity 100 Indicate FULL at 100 capacity in the Adjustable Range column indicates the preset mode CARD NEAR END ALARM Select whether or not to set the alarm to beep when the space remaining on the P2 card is small Items Adjustable Data Saved Range OFF Set the time at which to indicate that there is little space remaining on the P2 card Select whether or not to set the alarm to beep when the P2 card is full Set the length of time for
15. INTERVAL REC MODE BOGE P ON REC SLOT HOLD Select the recording order of the slot SLOTI when the power is turned on HOLD The recording order starts with the card previously selected when the power was turned off SLOT1 The recording order starts with the card that is inserted in slot 1 when the power is turned on Displayed REC TIME PAUSE TIME and TOTAL REC TIME are translated into either drop frame or non drop frame according to the mode of operation TAKE TOTAL TIME is actual time Therefore TOTAL REC TIME may incorporate fractions depending on the settings Example of drop frame REC TIME 02s00f PAUSE TIME 02s00f TOTAL REC TIME 19m59s06f OUTPUT SEL Items Adjustable Data Saved Range Select the signal that is output from the HD SDI A B connectors 4 2 2 YPBPR 4 2 2 format is selected 4 4 4 RGB 4 4 4 format is selected LINK A will be output from the HD SDI A connector and LINK B from the HD SDI B connector P 10LOG format signal is output This is valid when GAMMA MODE SEL is set to FILM REC and SIGNAL FORMAT is set to 4 4 4 OFF Signal format set in GAMMA MODE SEL is output V Note If you select ON in this item 2D CMS will operate simultaneously as well Set the character contents superimposed onto the output signals for the HD SDI A B connector and MON OUT connector MENU ONLY Displays only when the menu characters are superimposed No display
16. MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps 196 Menu Menu Description Tables Items Adjustable Data Saved Range gt DIONIC90 Enable selection under BATTERY SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps C U F DIONIC160 x Enable selection under BATTERY i SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually i When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps C U F NP L7 Enable selection under BATTERY SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage 4 in 0 1 V steps C U F C U F ENDURA7 x Enable selection under BATTERY i SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps Items Adjustable
17. SDI A connector and the HD SDI B connector Do not display center mark large Hollow large small Do not display frame Box I Corner frame 1 L_ _1 For setting the size of the safety marker It is possible to set the size by units of 1 with a fixed ratio between of width and height FRAME MARK ON OFF EGR Set the frame marker to ON or OFF 174 Menu Menu Description Tables mi EE USER BOX The VISTA ratio is 16 8 65 The CNSCO ratio is 16 6 81 For setting whether to include the user box in the signal from the HD SDIA B connector For setting the width of the user box For setting the height of the user box For setting the horizontal position of the user box center For setting the vertical position of the user box center MONI OUT MARKER Items Adjustable Data Saved Range CENTER MARK ad Switch the center mark OFF Do not display center mark 1 large 2 Hollow large 3 small 4 Hollow small ECOL SAFETY MARK OFF Select the frame type for the safety zone 1 OFF Do not display frame 2 a Box Corner frame L C U F R SAFETY AREA 80 For setting the size of the safety marker i Itis possible to set the size by units of 1 with a fixed ratio between of width and height Gh FRAME MARK ON OFF Set the frame marker to ON or OFF Set the frame marker The VISTA ratio is 16 8 65 The CNSCO rat
18. and CH4 Recording Levels page 62 Select the level setting method For more information see CH3 and CH4 Recording Levels page 62 Select the test signal OFF Disable test tone output NORMAL Test tone signals are output to all of CH1 CH4 when the OUTPUT AUTO KNEE selector switch has been switched to BARS and CH1 of the AUDIO IN switch has been switched to FRONT ALWAYS Test tone signals are always output to all of CH1 CH4 when the OUTPUT AUTO KNEE selector switch has been switched to BARS Output test tone to the channels where the AUDIO IN switch CH1 or CH2 is set to FRONT when OUTPUT AUTO KNEE selector switch is set to BARS The test tone is not output to CH3 and CH4 MIC LOWCUT CH2 C C C C MIC LOWCUT 0FE Seled the microphone low cut filter for The frequency characteristics when the microphone low cut CH3 input CH3 filter is applied are 200 Hz to 10 kHz aa OFF The microphone low cut filter is disabled for any input FRONT The microphone low cut filter is enabled when the front microphone is selected L The microphone low cut filter is enabled only when the wireless microphone is selected The microphone low cut filter is enabled only when the rear EUG 498 Menu Menu Description Tables microphone is selected MIC AUDIO2 TC UB Items Adjustable Items Adjustable Data Saved Range Data Saved Range FRONT MIC Select the phantom power supply for the TC MODE DF Set t
19. compressed For setting the master gamma 0 01 step For setting the gamma curve for the dark portion 8 to 1 The dark portion is compressed OFF Standard state 1 to 8 The dark portion is extended For setting the upper limit of compression expansion 13 Approximately 20 2 Approximately 30 3 Approximately 40 For selecting the color correction table for the linear matrix For switching on off of the 12 axis independent color correction HIGH SETTING Items Adjustable Data Saved Range MASTER GAIN Select the master gain from 3 0 3 6 9 12 15 18 21 24 27 or 30 dB For performing the horizontal detail correction level setting For performing the vertical detail correction level setting For performing the noise elimination level setting for detail R G 2 G B 2 2G R B 4 For performing the horizontal detail 3G R 4 freguency selection For setting the LEVEL DEPEND When the Y detail is emphasized details of dark sections are compressed If the numerical value is larger details of bright sections are also compressed For setting the master gamma 0 01 step C BLACK GAMMA For setting the gamma curve for the dark portion 8 to 1 The dark portion is compressed OFF Standard state 1 to 8 The dark portion is extended For setting the upper limit of compression expansion 1 Approximately 20 2 Approximately 30 3 Approximately 40
20. frame digits in 30 frames 24F Convert time code frame digits into 24 frames for display BMG For setting to correct the time code according to the delay of video signals 0 Do not correct 1 To delay the time code to be input according to the timing of the video images To forward the time code to be output according to the timing of the video images To delay the time code to be input and forward the time code to be output respectively according to the timing of the video images For details refer to Externally Locking the Time Code page 69 REC REVIEW REGEN For selecting whether the time code is regenerated to the value on the P2 card or not when subseguent recording starts after setting the RET SW item on the lt SW MODE gt screen to R REVIEW and pressing the RET button on the lens or the user button on the unit on which the RET SW function is assigned ON _ The time code is regenerated OFF The time code is not regenerated UMID SET INFO m litru Data m litru COUNTRY NO INFO Input the user s country NO INFO is displayed until the input completes ORGANIZATION NO INFO Input the user s organization or company name NO INFO is displayed until the input completes NO INFO a V Note Please refer to Setting UMID Information page 74 for the UMID information setting Input the user name NO INFO is displayed until the input completes Brite The in the Adjusta
21. of the user box For setting the height of the user box For setting the horizontal position of the user box center For setting the vertical position of the user box center e The user box can be displayed in any position as a boxtype cursor V Note The user box is not displayed on the LCD monitor if LT BOX is selected in DOWNCON MODE VF INDICATOR1 VF INDICATOR2 Adjustable Items Adjustable Range Data Saved Range ON For selecting ON or OFF for the For selecting ON or OFF for the CAC OFF extender display function display Items Data Saved EXTENDER Set the shutter speed indication to ON or OFF Set the filter No indication to ON or OFF CAC CUF IR GAMMA MODE IE ER DRS V ER P 10LOG IC BER VF GAMMA l t l Select whether the gamma mode is to be displayed or not ON OFF N OFF ON For selecting ON or OFF for the OFF dynamic range stretcher function display ON OFF ON OFF Set the AWB PRST A B indication to ON or OFF For selecting whether to display if P 10LOG is operating or not For selecting ON or OFF for the indication of the currently selected gain ON For selecting ON or OFF for the viewfinder gamma display ae K a OFF Disable the iris value indication MONITOR For selecting ON or OFF for the IRIS Enable the iris value indication GAMMA monitor gamma display e The
22. one segment m of the P2 card s remaining capacity indicator bars Jmin M One segment represents 3 minutes omin M One segment represents 5 minutes Menu Menu Description Tables 195 BATTERY SET TING1 Items Adjustable Data Saved Range x PROPAC14 xX CUTE C EE sd ili CUE TRIMPAC14 xX HYTRON50 xX HYTRON140 X Enable selection under BATTERY SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps Enable selection under BATTERY SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps Enable selection under BATTERY SELECT x Enable selection Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V steps Enable selection under BATTERY SELECT x Enable selection e Disable selection Select auto or manual to set the NEAR END voltage AUTO Set voltage automatically MANUAL Set voltage manually When
23. the unit to which the RET button of the lens or the RET SW function is allocated is pressed R REVIEW Rec review function It is possible to check a last few seconds of the records taken CAM RET Return video function It is possible to confirm the return video signals analog HD Y signals supplied to the GENLOCK IN connector on the unit by using the viewfinder Notes e When video signals in a format different from that for the video mode of the unit return video is not properly displayed When the GENLOCK item the lt GENLOCK gt screen on the SYSTEM SETTING page is set to INT the return video image may be displayed as slightly shaking horizontally GEG LK LVL For setting the super black level C C For selecting on off of the AUTO KNEE function and DRS function When it is set to OFF the AUTO KNEE may not function even if the AUTO KNEE switch is turned on When the DRS is selected and the AUTO KNEE switch is positioned to ON the DRS function turns on For the setting to adjust the black shading automatically when the AUTO W B BAL switch is held to the ABB side for 8 seconds or more Items Adjustable Dara Savea Range Pomers COLOR BARS SMPTE For selecting the color bar to be used FULLBARS SMPTE Color bar complied with the SRE SMPTE standards FULL BARS Full color bar SPLIT SPLIT color bar for SNG Satellite News Gathering EULER RC CHECK SW R REVIEW For specifying what the
24. to FILM REC this setting cannot be changed F REC BLACK STR LVL For setting the amount of black stretch when GAMMA MODE SEL has been set to FILM REC When GAMMA MODE SEL has not been set to FILM REC this setting cannot be changed V REC KNEE SLOPE For setting the amount of knee slope when GAMMA MODE SEL has been set to VIDEO REC When GAMMA MODE SEL has not been set to VIDEO REC this setting cannot be changed V REC KNEE POINT For setting knee point when GAMMA MODE SEL has been set to VIDEO REC When GAMMA MODE SEL has not been set to VIDEO REC this setting cannot be changed For switching on off of the gamma correction Switch the test signal on or off Set the flare correction to on or off For switching on off of the aperture correction All items in CAMERA SETTING are setting targets of the item PAINT MENU SW R W in the lt SD CARD R W SELECT gt screen B The VF DISPLAY Items liru Data Saved liru STATUS MODE NORMAL For selecting the status display mode of the viewfinder NORMAL Normal status display FILM REC Status display for FILM REC V Note Setting STATUS MODE to FILM REC disables the DISP CONDITION and DISP MODE settings NORMAL Display status constantly HOLD Display status only when the MODE CHECK switch is pressed Set the DISP MODE Switch the camera s Warning Message indication Please refer to Display Modes and Set
25. total hours the camera power has been turned on Display total number of times the POWER switch has been turned on P ON TIMES Menu Menu Description Tables 205 i OPTION MENU The in the Adjustable Range column indicates the preset mode OPTION Items Adjustable Data Saved Range AREA SETTING Items Adjustable Data Saved Range ENG SECURITY ON Select whether or not to prohibit opening OFF the menu screen ON Menu screen cannot be opened Please consult your distributor to release the setting OFF Menu screen can be opened EMAR FRAME RATE FRM RATE For setting the user bits to record when UB MENU the video system is set to 24P or 24PA For details refer to Recording time code and user bits page 64 FRM RATE For recording the shooting information frame rate etc of the camera This follows the settings in the UB MODE item and the VITC UB MODE item of lt TC UB gt screen However the camera shooting information is always recorded when recording in native mode Fs el le AUDIO OUT Select whether or not to delay audio DELAY THROUGH headphone and speaker outputs DELAYED Delay audio output in synchronization with video output THROUGH Output audio input without delay This setting prevents echo effect between the sound source and audio output when the sound source is near the unit ECR FAN MODE OFF For setting the operation mode of the fan AUTO OFF The fan always stops AUTO
26. unit does when PLAY the REC check button on the remote control unit is pressed R REVIEW The unit performs rec review PLAY The unit performs playback OUER SIDE SW LOCK OFF For selecting whether to disable the ON switches GAIN OUTPUT and AWB switches on the side of the unit When this setting is changed from OFF to ON the set states of the switches are preserved While this setting is ON the switches remain disabled OFF Switches are not disabled ON Switches are disabled EEF Menu Menu Description Tables 193 Items Adjustable AWB B TEMP For setting the color temperature when the WHITE BAL switch is set to the B position Items Adjustable Data Saved Range FILTERINH ON For selecting independently whether If the automatic adjustment of white OFF memory data for white balance Ach balance is executed in the B position Bch is retained or not for the respective the color a ibe ee CC filters memorized in the position of the ON Regardless of the CC filter data BAL switch B for the memories 2 memories F 1 for Ach and Bch is retained OFF The memory data 8 memories for Ach and Bch is retained for LENS IRIS the respective CC filters C U FIR di transiting to the switched position of g white balance when the position of the AIRIS LEVEL Set the target value for auto iris WHITE BAL switch is changed OFF To transit instantly i FAST About 1 second
27. EE OFF setting the MANUAL KNEE menu option of the lt KNEE LEVEL gt screen to ON and then changing the following menu options When HD SD FILMLIKE1 FILMLIKE2 or FILMLIKE3 has been selected in the GAMMA MODE SEL menu option of the lt GAMMA gt screen reduce the value in the KNEE MASTER SLOPE menu option of the lt KNEE LEVEL gt screen When FILM REC has been selected in the GAMMA MODE SEL menu option of the lt GAMMA gt screen reduce the value in the F REC DYNAMIC LVL menu option of the lt GAMMA gt screen When VIDEO REC has been selected in the GAMMA MODE SEL menu option of the lt GAMMA gt screen reduce the value in the V REC KNEE SLOPE menu option of the lt GAMMA gt screen 180 Menu Menu Description Tables MID SETTING Items Adjustable Data Saved Range MASTER GAIN C BLACK GAMMA MATRIX TABLE B SIE UES COLOR ON CORRECT OFF SICUT Select the master gain from 3 0 3 6 9 12 15 18 21 24 27 or 30 dB For performing the horizontal detail correction level setting For performing the vertical detail correction level setting For performing the noise elimination level setting for detail For performing the horizontal detail frequency selection For setting the LEVEL DEPEND When the Y detail is emphasized details of dark sections are compressed If the numerical value is larger details of bright sections are also
28. FF viewfinder on when the electronic shutter is activated ILL WHITE PRESET For the setting to turn the O lamp on the OFF viewfinder on when the WHITE BAL switch is set to the PRST position EEE EXTENDER For the setting to turn the lamp on the OFF viewfinder on when the lens extender is activated Be B GAMMA For the setting to turn the O lamp on the viewfinder on when the BLACK GAMMA is activated Es OFF MATRIX OFF For the setting to turn the O lamp on the viewfinder on when the color correction table for the linear matrix is selected Rg O c m COLOR CORRECTION GPE For the setting to turn the lamp on the viewfinder on when the 12 axis independent color correction is selected C FILTER For the setting to turn the O lamp on the OFF viewfinder on when the filter combination is anyone other than 3200 K and CLEAR Menu Menu Description Tables 189 a CAM OPERATION The in the Adjustable Range column indicates the preset mode CAMERA ID Items Adjustable Data Saved Range ID1 KKK KKK Setting 1 for the CAMERA ID recorded AA on color bars Up to 10 characters are allowed for this setting F EU F ID2 KKK KKK Setting 2 for the CAMERA ID recorded AKM on color bars Up to 10 characters are allowed for this setting C U F ID3 KKK KKK Setting 3 for the CAMERA ID recorded PEER on color bars Up to 10 characters are allowed for this setting C U F V Note Thi
29. FRATE function has been assigned to a user button the starting frame rate under VFR operation is set When the mode has been changed using other settings and the frame rate value set here exceeds the maximum frame rate allowed by the set mode the maximum frame rate is changed to the maximum frame rate of the set mode This setting is for correcting an image which has been inverted by a film use lens or anamorphic lens attached to the unit This is for setting the operations mode of this unit when PC MODE is set to ON and an external device is connected to the USB connector USB HOST Allows data transfer from the unit to the USB connected device USB DEV Allows data transfer from the USB connected device to the unit V Note When the PC MODE menu option is set to ON no change can be made to this option Used to enable or disable the mode that allows the unit to be connected to a PC or an external hard disk drive via USB 2 0 ON Sets the unit to the mode selected through the PC MODE SELECT menu option OFF Disables the PC MODE for normal operation V Note Once the power is turned off the option is always set to OFF when the power is turned on next time OPTION MODE Items Adjustable Data Saved Range ACCESS LED P OFF GPS DATA Specify whether or not to enable the P2 card access LEDs OFF Disables both LEDs above the slots and on the side panel SLOT SIDE Enables the LED above the slo
30. IT For locking the down converter output signals to the GENLOCK input For the HD SDI output signals the start position of the video gains by about 90 lines Perform coarse phase adjustment for horizontal hold when configuring a system Perform fine phase adjustment for horizontal hold when configuring a system 176 Menu Menu Description Tables E PAINT The in the Adjustable Range column indicates the preset mode RB GAIN CONTROL RGB BLACK CONTROL Items Adjustable Items Adjustable Data Saved Range Data Saved Range R GAIN AWB For setting the Rch gain when the MASTER PED For setting the level of the master PRE WHITE BAL switch is in the PRST pedestal position a For setting the Bch gain when the For setting the pedestal level of the Rch WHITE BAL switch is in the PRST position For setting the Rch gain when the For setting the pedestal level of the Gch WHITE BAL switch is in the A position For setting the Bch gain when the For setting the pedestal level of the Bch WHITE BAL switch is in the A position For setting the Rch gain when the PEDESTAL For setting the pedestal levels of the WHITE BAL switch is in the B position rr Rch the Gch and the Bch when the auto black balance is adjusted ON To retain the values set in the respective items of R PEDESTAL G PEDESTAL and For setting the Bch gain when the B PEDESTAL WHITE BAL switch is in the B position The pedestal levels of the Rch
31. NTERVAL REC ON Selects whether INTERVAL REC MODE HOLD OFF settings are retained or not when the power is turned off once ON Retain OFF Donot retain The INTERVAL REC MODE is OFF whenever the power is turned on again EDGE REC TIME 00s01f Set recording time for INTERVAL REC 1 cut V Note However the settings can be made frame by frame and the numbers of the cut off unit frames for the shortest time period and the set time on the actual operation may vary with the recording method For details refer to Interval Recording page 44 EUNE PAUSE TIME 00h00m00s01f Specify pause time for INTERVAL REC V Note 00h04m59s23f However the settings can be made 23h59m59s29f frame by frame and the numbers of the cut off unit frames for the shortest time period and the set time on the actual operation may vary with the recording method For details refer to Interval Recording page 44 Specify the time needed for INTERVAL REC Select from NONE continue until operation is manually stopped to 5 days TOTAL REC NONE Display total recorded time for TIME 00m00s01f INTERVAL REC The setting cannot be changed using this option Displays the recording time recording time needed for the P2 card calculated using REC TIME PAUSE TIME and TAKE TOTAL TIME V Note A value based on actual processing is displayed 90m59s29f OVER100min AUDIO REC ON Select whether or not sound will be OFF r
32. Panasonic Broadcast AJ HPX3700 Menu Information Menu Configuration SYSTEM SETTING SYSTEM MODE MAIN MENU OPTION MODE PAINT RB GAIN CONTROL REC FUNCTION RGB BLACK CONTROL OUTPUT SEL MATRIX HD SDIA B OUT MARKER OPTION COLOR CORRECTION MONI OUT MARKER LOW SETTING LCD MONITOR MID SETTING GENLOCK HIGH SETTING ADDITIONAL DTL SKIN TONE DTL KNEE LEVEL GAMMA CAMERA SETTING VE VF DISPLAY VE MARKER CAM OPERATION CAMERA ID VF USER BOX SHUTTER SPEED VF INDICATOR1 SHUTTER SELECT VF INDICATOR2 USER SW VF INDICATOR3 SW MODE MODE CHECK IND WHITE BALANCE MODE LED LENS IRIS E Opening the Menus MAIN OPERATION BATTERY P2CARD USER MENU BATTERY SETTING1 Displayed when the MENU button is FILE SD CARD READ WRITE BATTERY SETTING2 d SD CARD R W SELECT MIC AUDIO 1 pressed CAC FILE CARD READ MIC AUDIO 2 MAIN MENU LENS FILE TC UB pressed for at least 3 seconds SPENE sE OPTION MENU Displayed when the MENU button is MAINTENANCE LENS ADJ ressed while pressing the LIGHT BLACK SHADING g KO SELECT MODE WHITE SHADING i USER MENU SELECT SYSTEM SETTING LENS FILE ADJ PAINT CAC ADJ VF DIAGNOSTIC1 CAM OPE DIAGNOSTIC2 MAIN OPE HOURS METER FILE MAINTENANCE V Notes e The items highlighted in grey cannot be selected by lt USER MENU SELECT gt e The underlined items can only be selected by lt USER MENU SELECT gt as one whole page with all sub items Individual sub items cannot be selected separately Abo
33. Select whether or not to include the set SVV M R W to OFF and then execute the operation again m values on the PAINT MENU page when reading out or writing to the SD memory card Select whether or not to include the set values on the VF page when reading out or writing to the SD memory card Select whether or not to include the set values on the CAM OPERATION page when reading out or writing to the SD memory card Select whether or not to include the set values on the MAIN OPERATION page when reading out or writing to the SD memory card Select whether or not to include the set values on the MAINTENANCE page when reading out or writing to the SD memory card Menu Menu Description Tables 201 CAC FILE CARD READ Data Saved Range Items Adjustable CARD FILE 01 For selecting the number of the Data Saved Range SELECT 32 using READ from the lt CAC FILE CARD READ gt screen chromatic aberration correction file on TITLE the SD memory card that will be read or For displaying the name of a CAC file set deleted i YE For storing a CAC file read from the SD For reading CAC file from the SD memory card to the internal memory of memory card When selected the the unit N For deleting a CAC file from the SD memory of the unit memory card MEM STORE EMPTY NO For searching through the For reading the name of a CAC file on internal memory of the unit in the SD memory card numerical order when
34. The fan will run automatically when the temperature in the unit increases V Note Once the power is turned off this will always be set to AUTO whenever the power is turned on If the unit is operated as the fan stops the temperature in the unit will increase and data may not record or play back properly Use the unit after setting this item to AUTO for normal operation A RATE SETAT ON For setting if the frame rate can be REC OFF changed or not during VFR recording ON Frame rate can be changed OFF Frame rate cannot be changed V Note Audio while recording VFR will not be recorded onto the P2 card regardless of the frame rate setting when this is set to ON ACUE 206 Menu Menu Description Tables HAREA SET NTSC Selects an NTSC area outside Japan NTSC J Selects Japan PAL Selects a PAL area For changing the area setting selected using AREA SELECT For more details about settings used in different areas refer to Color TV Standard Settings Settings for frame frequency page 14
35. Then press the jog dial button The value starts blinking lt USER SW gt gt USER MAIN SW 3 VFR ft USERI sw YY EP TITS USER2 SW VF GAM MARKER SEL VF MARK USER3 SW TEXT MEMO SW TEXT MEMO USER4 SW 5 Turn the jog dial button to change the value To increase the value Turn the jog dial button clockwise as seen from the front of the camera To decrease the value Turn the jog dial button anti clockwise as seen from the front of the camera Each turn of the dial switches the value by one step A quick turn changes the value rapidly a slow turn makes a fine adjustment To turn an option on or off To select ON turn the jog dial button clockwise as seen from the front of the camera To select OFF turn the jog dial button anti clockwise as seen from the front of the camera To return the changed set value to the previous one To return the changed value to the previous one press the SHOT MARKER MENU CANCEL button once while the changed value is flashing and PUSH CANCEL BACK TO PREV will appear Press the SHOT MARKER MENU CANCEL button again to return the set value to the value before the change V Notes e The following menu items cannot be canceled using the SHOT MARKER MENU CANCEL button Pages on the USER MENU SELECT screen Pages on the FILE screen CAMERA ID Part of the WHITE BALANCE MODE pages BATTERY SETTING1 2 UMID SET INFO e In the 1080 23 98P an
36. YSTEM MODE 1080 59 94i For setting the system frequency 1080 23 98PsF When this item is switched turn off the 1090 Z IPSF POWER switch on the unit and then 1080 50i turn it on again V Notes e When USB DEVICE mode is selected no change can be made to this option e When the remote control unit AJ RC10G is connected this item is not displayed s c u F REC FORMAT Used to set the codec mode and the recording shooting mode DVCPROHD Recording is performed using DVCPRO HD codec AVC I 100 Recording is performed using AVC Intra100 codec AVC I 50 Recording is performed using AVC Intra50 codec Used when SYSTEM MODE is set to 1080 59 94i When DVCPROHD 60i is selected it is possible to refine the shooting mode selection by setting CAMERA MODE DVCPROHD 60i AVC I 100 60i AVC I 100 30PN AVC 1 100 24PN AVC I 50 60i AVC 50 30PN AVC 50 24PN AVC I 100 24PN Used when SYSTEM MODE is set to AVC 150 24PN 1080 23 98PsF or 1080 24PsF DVCPROHD 50i Used when SYSTEM MODE is set to AVC I 100 50i 1080 50i AVC 100226PN When DVCPROHD 50i is selected it is AVC 150 25PN _ POssible to refine the shooting mode selection by setting CAMERA MODE 170 Menu Menu Description Tables Items Adjustable Data Saved Range CAMERA MODE DVCPROHD When using the DVCPRO HD recording 50 of 1080 format in the 1080 60i or 1080 50i 59 94i modes the pull down method 60i i i IF conventional camera mode will
37. appears when other characters are superimposed Display the time code Displays the menu when menu characters are superimposed Note that when 1080 23 98PsF or 1080 24PsF has been selected in the SYSTEM MODE menu option the frame digits will not be updated correctly Display the same characters superimposed on the viewfinder signal Displays the menu when menu characters are superimposed Select whether to superimpose characters on the HD SDI A B connector The character content output from the HD SDI A B and MON OUT connectors is the same OFF The characters are not superimposed A The characters are superimposed on the HD SDIA connector The characters are superimposed on the HD SDI B connector The characters are superimposed on the HD SDI A connector and the HD SDI B connector Items Adjustable Data Saved Range oman OUT VBS Select the output signal on the MON jowronour HD SDI OUT connector MONITOR ON This sets whether to perform telecine GAMMA OFF conversion correction on the MON OUT RC OUT and LCD OUT signals when GAMMA MODE SEL is set to FILM REC ON Correction is performed OFF Correction is not performed C U F VF LCD CHAR VF OFF This sets whether to superimpose characters on the video shown on the LCD monitor and in the viewfinder Note however that the characters are output to one of the MON OUT VF OUT and LCD OUT signals ELUS VF MODE MEM Select the image
38. be set 24P 24PA DVCPROHD 50i of 1080 50i 50i 25P Modes other than the above This is for setting the variable frame rate OFF Operates with a fixed frame number Operates with a frame rate set using REC FORMAT ON Operates with a variable frame rate Operates with a frame rate set using FRAME RATE V Note When INTERVAL REC or LOOP REC is set this setting is set to OFF 24P VFR RANGE 24FRAME Select the upper limit of the frame rate SOFRAME that can be changed during VFR This item is displayed only when 1080 23 98PsF or 1080 24PsF is selected in SYSTEM MODE V Note Seguence of the HD SDI output signal will be disturbed when this item is set to 3OFRAME and FRAME RATE is set to 24 30FRAME but this is not a malfunction FRAME RATE 1080 59 94i This is for setting the shooting frame 1080 23 98PsF number during VFR operation 1080 24FSF When the mode has been changed 1FRAME l l using other settings and the frame rate value set here exceeds the maximum frame rate allowed by the set mode the maximum frame rate is changed to the maximum frame rate of the set mode 24FRAME 30FRAME 1080 50 FRAME 25ERAME Items Adjustable Data Saved Range USR SW ERATE 1080 59 94i oe 23 98PsF 1080 24PsF FRAME 24FRAME 30FRAME 1080 50i FRAME 25FRAME 86 F 8 SCAN REVERSE ON OFF s c u F R PC MODE SEL USB HOST USB DEV When the
39. ble Range column indicates the preset mode SD CARD READ WRITE SD CARD R W SELECT Items Adjustable Items Adjustable R SELECT Select the file number to read out SYSTEM MODE ON Select whether or not to include the settings for the options on the lt SYSTEM MODE gt screen when reading out or F writing to the SD memory card Read out the data from the SD memory card Select whether or not to include the CAMERA ID when reading out or writing ll es Select the file number to write in to the SD memory card bs si el LA el USER MENU Select whether or not to include the SELECT R W settings on the USER MENU SELECT page when reading out or writing to the SD memory card Write the unit s menu data to the SD memory card Format the SD memory card Select whether or not to include the set SASIE values on all screens except the TITLE READ Read out the title of the data recorded on lt SYSTEM MODE gt screen on the the SD memory card SYSTEM SETTING page and the set values on the OPTION MENU page 3 when reading out or writing to the SD TITLE1 8 gt Kk KKK Up to 8 letters can be set for the title memory card Select whether or not to include the adjusted values on the PAINT page when reading out or writing to the SD For a USB DEVICE mode errors occur even if the memory card respective items for SD CARD READ WRITE are executed since it does not access an SD memory card Set PC MODE PAINT MENU
40. d 1080 24P modes the menu displayed on the LCD monitor may blink This is normal and does not indicate that a fault has occurred 6 Press the jog dial button The value stops blinking and is accepted To change the settings for other options on the same page repeat steps 4 6 8 When the settings are finalized press the MENU button This terminates the menu option setting mode and returns the unit to normal operation mode m selecting Options for USER MENU Go to the USER MENU SELECT page from MAIN MENU Then open relevant menu screens to select options to add to USER MENU Only the selected options are displayed as options in USER MENU For information about how to navigate this menu see Setting Menu Options page 168 i lt USER MENU SELECT gt SELECT MODE nueW SYSTEM SETTING PAINT VF CAM OPERATION MAIN OPERATION FILE MAINTENANCE V Note Options with gt are effective The number of options that can be added to USER MENU is 14x 3 42 3 pages of options for camera related options and 14 1 page of options for memory related options Note however that the number of options that can be added is reduced if menu options not normally displayed in the selected mode are added Menu Menu Configuration 169 Menu Description Tables SYSTEM SETTING The in the Adjustable Range column indicates the preset mode SYSTEM MODE Items Adjustable Dara Savea Range Pemes S
41. display of the iris value and the display of the iris override are AEE interlinked When the iris override is changed it is forcibly displayed for 3 seconds 2 O gt For setting to record the camera ID BAR Thecamera ID is recorded when the color bar signals are recorded OFF The camera ID is not recorded O a O U O10 o a O Z For setting the position to display the camera ID UPPER R Upper right UPPER L Upper left LOWER R Lower right LOWER L Lower left For selecting an option to display year month day and hour minute second simultaneously when the camera ID is displayed Set the zoom position indication to ON or OFF Set the color temperature indication to ON or OFF For selecting ON or OFF for the system mode and REC mode display For selecting ON or OFF for the recording format display For selecting ON or OFF for the frame rate display Menu Menu Description Tables 187 VF INDICATOR3 CEE SYSTEM INFO ICF R OFF ONE CARD TOTAL Select the indication mode for the P2 cards remaining capacity OFF Disable the remaining capacity indication ONE CARD Display the remaining capacity of the P2 card currently used for recording Display the total remaining capacity of all P2 cards in slots Set the battery voltage indication to ON or OFF Set the audio lever meter indication to ON
42. e P2 card when first recording after switching on the power inserting the P2 card or changing the P2 card that is the recording target PRESET Use the units internal time code REGEN For clips recorded on the recording target P2 card regenerate the time code as the time code of the clip that has the most recent date and time V Notes e Set the date and time accurately For guidance on setting see Setting the Internal Clock s Date and Time page 67 During operation in either 24P or 24PA mode regeneration of the value of the card recorded in drop frame is not permitted ICUS ON For selecting whether to allow the time code of the LCD monitor to be set and the counter to be displayed when the power is off ON It is possible to set the time code and display the counter when the power is off OFF Power down LCD monitor while camera power is turned off Setting and indication disabled BEGG TC OUT ICG Select the time code to be output to the TCG TCR time code output connector TCG Always output time code generator value TCG TCR Output time code generator value in recording mode and time code reader value in playback mode Bie 200 Menu Menu Description Tables Items Adjustable Data Saved Range TC DISP SEL 30F Select the display format for the time 24F code frame digits For 1080 59 94i only For details refer to Recording time code and user bits page 64 30F Display time code
43. e adjusted in the horizontal direction and the vertical direction e Data adjusted on the lt LENS FILE ADJ gt screen can be stored on an SD memory card as a lens file 204 Menu Menu Description Tables CAC ADJ Items Adjustable Data Saved Range CAC CONTROL ON Enable chromatic aberration OFF correction Disable chromatic aberration correction U F R Deletes the CAC file stored in the internal memory of the unit and selected using CAC FILE NO Selects a CAC file when manual correction is in use Also selects CAC file for deletion when deleting CAC files using CAC FILE DELETE Scrolls through CAC files Select this option using the cursor Press the jog dial button and then turn the jog dial button to scroll through the CAC files For displaying up to 32 file names each up to 27 characters in length I For displaying up to 32 file names each up to 27 characters in length o k For displaying up to 32 file names each up to 27 characters in length o gt For displaying up to 32 file names each up to 27 characters in length Oo k For displaying up to 32 file names each up to 27 characters in length o For displaying up to 32 file names each up to 27 characters in length For displaying up to 32 file names each up to 27 characters in length o xN For displaying up to 32 file names each up to 27 characters in length DIAGNOSTIC1 Items Adju
44. ecorded during INTERVAL REC BOGE START DELAY OSEC Set the delay after pressing REC START to start recording in INTERVAL REC 10SEC U F This variable range is the numerical values for 59 94 Hz For 50 Hz the frame rate is up to 24f The frame rate is up to 23f in 24PN Native mode 172 Menu Menu Description Tables Items Adjustable Data Saved Range PRE REC MODE ON Select whether or not to enable PRE OFF RECORDING ON PRE RECORDING enabled OFF PRE RECORDING disabled V Note Specify the PRE RECORDING time by using the menu option PRE REC TIME S UE PRE REC TIME 1SEC Set PRE RECORDING 1 8SEC BSEC Set the length of time that can be retrospectively recorded before the REC START button is pressed REGE LOOP REC ON Select whether or not to enable LOOP MODE OFF REC This setting can be used with PRE RECORDING features ON Enable LOOP REC OFF Disable LOOP REC V Notes e After the power is turned off this item will default to OFF the next time the power is turned on e This item cannot be changed when ON or ONE SHOT is selected in INTERVAL REC MODE REC START ALL Select operating modes that allow NORMAL recording to start ALL Allow recording to start during stop recording pause and playback NORMAL Allow recording to start during stop and recording pause V Note Even if this is set to ALL the operation is NORMAL when ON or ONE SHOT is selected in
45. ed CLULFIR MATRIX R G For performing the linear matrix adjustment red green i For performing the color saturation correction between red and magenta For performing the linear matrix adjustment red blue For performing the color saturation correction of magenta For performing the linear matrix adjustment green red For performing the color saturation correction between magenta and blue For performing the linear matrix adjustment green blue For performing the color saturation correction of blue BEGE B SAT For performing the linear matrix adjustment blue red For performing the color saturation correction between blue and cyan For performing the linear matrix adjustment blue green For performing the color saturation correction of cyan geo S a e m For selecting the color correction table when the GAIN switch is in the L position For performing the color saturation I correction between cyan and green For selecting the color correction table when the GAIN switch is in the M position For performing the color saturation For selecting the color correction table correction of green when the GAIN switch is in the H position CES S For performing the color saturation V Notes correction between green and yellow e The items indicated by IM are the setting items for PAINT MENU SW M R W in the lt SD CARD R W SELECT gt screen The items without
46. he time code mode POWER OFF front microphone NDF DF Drop frame NDF Non drop frame V Note OFI da O Power SUPPI Y TOF ME When the unit operates at 50 Hz or in When OFF is selected no phantom a or 24PA kl j the non drop frame power is supplied even if the LINE MIC OAS TAS 48V selector switch is set to 48V C U F UB MODE Select the user bits mode USER Select UB value set in the LCD section Select local time hours minutes seconds Select local date and time 2 last FRONT MIC 40dB Select the front microphone input level digits of year month date time LEVEL 90dB The user bits input to the TC IN C U F connector are recorded a REAR MIC CH1 50dB Select the rear microphone input level If reading fails USER value is LVL 60dB retained C U F TCG TCG value enters UB REAR MIC CH2 50dB Select the rear microphone input level FRM RATE Ea l LVL 60dB Select the shooting information When the MONITOR select switch is set to ST stereo select the signal format for the monitor output nus C U F e g frame rate for the camera REAR LINE IN 0dB Select the rear line input level ie ES eR See LVL 4dB Frame rate information 3dB recorded in user bits page 66 C U F When clips recorded in native AUDIO OUT LVL 0dB Select the audio output level mode are played back the frame 4dB rate information recorded in 3dB users bits in the VAUX area
47. ich is selected in the SKIN TONE DTL item 8 C U FIR For selecting the skin color table for SKIN TONE AREA OFF A B A ON OFF ON OFF oo az T subjects to which the skin tone table applies V Note The items indicated by IM are the setting items for PAINT For fetching the color information of A MENU SW R W in the lt SD CARD R W SELECT gt or B which is selected in the DETECT screen The items without are the setting items for PAINT TABLE item near the center marker MENU LEVEL R W ANA A add eons acca Please refer to SD CARD R W SELECT page 201 for from CENTER to Q PHASE are fetched automatically The fetched data will be the table data of A or B which is selected in the DETECT TABLE item It is impossible to obtain color information of both A and B at the same time more information TI TI For setting the effect level of the skin tone detail 182 Menu Menu Description Tables KNEE LEVEL Items Adjustable Data Saved Range MASTER PED Set the master pedestal IH MANUAL Set the mode when the AUTO KNEE switch is OFF The KNEE MASTER POINT KNEE MASTER SLOPE set value is enabled when this setting is ON For setting the knee point position in increments of 0 5 steps For setting the inclination of the knee IIVVHITE CLIP ON Set the WHITE CLIP feature to ON or OFF OFF The WHITE CLIP LVL set value is enabled when this se
48. iguration 167 lt D 3 c Setting Menu Options The menu options are set with the MENU and jog dial buttons The menu comprises main menu sub menus and options menus The data specified through menu options are written and saved in the internal memory of the unit This section describes how to set options in MAIN MENU The other menus can be configured in the same manner the method of displaying the menu screen depends on the particular menu V Note When the unit is in thumbnail mode the viewfinder displays THUMBNAIL OPEN disabling navigation through the menu 1 Press the MENU button for 3 seconds or longer The MAIN MENU screen appears together with its options MAIN MENU SYSTEM SETTING PAINT VF CAM OPERATION MAIN OPERATION FILE MAINTENANCE USER MENU SELECT 2 Turn the jog dial button to move the mark gt toa desired menu option Then press the jog dial button to display the sub menu screen MAIN MENU SYSTEM SETTING PAINT VF CAM OPERATION MAIN OPERATION FILE MAINTENANCE USER MENU SELECT 3 Turn the jog dial button to move the mark gt to a desired menu option Then press the jog dial button to display the options screen lt CAM OPERATION gt CAMERA ID SHUTTER SPEED SHUTTER SELECT USER SW SW MODE WHITE BALANCE MODE LENS IRIS 168 Menu Menu Configuration 4 Turn the jog dial button to move the mark gt to a desired option
49. io is 16 6 81 For setting whether to include the user box in the signal from the MON OUT connector For setting the width of the user box For setting the height of the user box For setting the horizontal position of the user box center For setting the vertical position of the user box center LCD MONITOR Items Adjustable Data Saved Range Adjust the LCD monitor brightness Adjust the LCD monitor chroma level Adjust the LCD monitor contrast ROUL an Adjust the backlight HIGH NORMAL Mode normally used HIGH This is brighter than NORMAL SELF SHOOT NORMAL Select whether or not to change the LCD MIRROR monitor to mirror image NORMAL Do not change to mirror image MIRROR Change to mirror image BRUGES Menu Menu Description Tables 175 GENLOCK Switch the camera synchronizing signal INT Synchronize with the internal reference signal regardless of the reference signal input to the GENLOCK IN connector Synchronize with the reference signal input to the GENLOCK IN connector For selecting the output signals that lock phases to the signals that are input in the GENLOCK IN connector Note however that in 1080 23 98PsF mode and 1080 24PsF mode the phase is locked to HD SDI even if COMPOSIT has been selected HD SDI For locking the HD SDI output signals to the GENLOCK input For the down converter output signals the start position of the video delays by about 90 lines COMPOS
50. is output C U F Read out value stored in the HEADROOM ba Set the headroom standard level card and record valie C U F continuously WIRELESS ON Select whether or not to enable the WARN OFF alarm to trigger for poor wireless receiver reception EEG WIRELESS SINGLE Select the type of wireless receiver TYPE DUAL SINGLE Select a single channel wireless receiver DUAL Select a 2 channel wireless receiver der Menu Menu Description Tables 190 Items Adjustable Data Saved Range Remarka VITC UB MODE USER EXT Select the user bits mode for VAUX TC VITC USER EXT If UB MODE is set to EXT the EXT value is recorded If not USER value set by UB is recorded Select local time hours minutes seconds Select local date and time 2 last digits of year month date time TCG value enters UB FRM RATE Select camera shooting information frame rate etc For more information see Frame rate information recorded in user bits page 66 REGEN Read out value stored in card and record value continuously V Note When the unit operates in 24P 24PA and Native mode the FRM RATE is fixed BUG TCG SET HOLD ON On off switching for the feature that OFF always starts recording when the power is turned on again the TCG value that was set before the power is turned off la UFS FIRST REC TC PRESET For selecting whether the time code is REGEN regenerated to the value on th
51. n The zebra pattern is displayed when this For setting the center position on the I item is turned ON and the lt SKIN axis for setting an area that enables skin TONE DTL gt screen is opened i tone The zebra pattern indicates the area which is selected in the SKIN TONE DTL item PI URR For setting the area width for enabling S C U F R the skin tone on the l axis of which the IIZEBRA HD For setting to include the skin tone zebra center is the CENTER SDI A OFF in the HD SDI A signal The zebra pattern is displayed when this item is turned ON and the lt SKIN TONE DTL gt screen is opened For setting the area width for enabling The zebra pattern indicates the area l the skin tone on the Q axis of which the which is selected in the SKIN TONE DTL PE center is the CENTER item S C U F R MZEBRA HD For setting to include the skin tone zebra For setting phases of the area for ji A in the HD SDI B signal enabling skin tone as setting the The zebra pattern is displayed when this standard to the Q axis item is turned ON and the lt SKIN TONE DTL gt screen is opened The zebra pattern indicates the area which is selected in the SKIN TONE DTL item SICU FIR mMZEBRA MONI ON For setting to include the skin tone zebra wr in the MON OUT signal The zebra pattern is displayed when this item is turned ON and the lt SKIN TONE DTL gt screen is opened The zebra pattern indicates the area wh
52. ng the color temperature when Set the adjustable value for IRIS GAIN the WHITE BAL switch is set to the This setting is effective when CAM is selected for IRIS GAIN PRST position e Since the range of color temperatures that can be set will vary with the CC filter position a numerical value cannot be changed even if the color temperature is changed when a high color temperature is set PRE AWB A TEMP For setting the color temperature when the WHITE BAL switch is set to the A position If the automatic adjustment of white balance is executed in the A position the color temperature at that time is memorized in the position of the WHITE BAL switch A 194 Menu Menu Description Tables E MAIN OPERATION The BATTERY P2CARD Items Adjustable Data Saved Range PROPAC14 TRIMPAC14 HYTRONSO HYTRON140 DIONIC90 DIONIC160 BP L65 95 NiCd14 TYPE A TYPE B AC_ADPT PROPAC14 TRIMPAC14 HYTRONSO HYTRON140 DIONIC90 DIONIC160 BP L65 95 NiCd14 TYPE A TYPE B VE s BATT NEAR ON END ALARM BATT NEAR END CANCEL Select the battery to use Remaining capacity detection is also performed according to the selected battery The variable range is changed by the item settings selected on the BATTERY SETTING1 page 196 and BATTERY SETTING2 page 197 menus The initial value for TYPE A is set to DIONIC90 while the same for TYPE B is set to HYTRON140 When BP GL65 or BP
53. or OFF Select whether the time code is to be displayed or not on the color bar Select the time code to display Disable the time code display Display the time code generator value in recording mode Display the time code reader value in playback mode TCG TCR Display the time code generator value in recording mode and the time code reader value in playback mode Select the method of displaying system information and warnings OFF Display no warnings other than TURN POWER OFF and SYSTEM ERROR ALWAYS Always display warnings NORMAL Display warnings for 3 seconds only when problems occur 188 Menu Menu Description Tables Items Adjustable Data Saved Range SAVE LED SAVE Set the SAVE lamp function P2CARD SAVE The lamp lights up when the SAVE ON OFF switch is set to ON and the output system assigned in OPTION MODE page 171 is in the save mode P2CARD The lamp blinks in synch with the warning message when the P2 card s remaining recording capacity is getting low OUAR REC STATUS ON Select whether or not to enable REC OFF indication in the viewfinder and on the LCD monitor during recording ON REC indication enabled OFF REC indication not enabled V Note This option is useful when unit is used independently BDL PROXY REC ON When a video encoder card AJ OFF YAX800G optional is attached proxy recording information is displayed when recording starts ON
54. peed for For 59 94 Hz 1 60 POSITION For 59 94 Hz 1 60 POSITIONS 1 100 1 100 1 120 1 120 1 250 1 250 1 500 1 500 1 1000 1 1000 1 2000 1 2000 HALF HALF 180 0deg 180 0deg 172 8deg 172 8deg 144 0deg 144 0deg 120 0deg 120 0deg 90 0deg 90 0deg 45 0deg 45 0deg For 50 Hz 1 50 For 50Hz 1 50 1 60 1 60 1 120 1 120 1 250 1 250 1 500 1 500 1 1000 1 1000 F 1 2000 1 2000 HALF HALF 180 0deg 180 0deg 172 8deg 172 8deg 144 Odeg 144 0deg 120 0deg 120 0deg 90 0deg 90 0deg 45 0deg 45 0deg nus POSITION2 SEL For setting the shutter speed for POSITION4 SEL For setting the shutter speed for For 59 94 Hz 1 60 POSITION2 For 59 94 Hz 1 60 POSITION4 1 100 1 100 1 120 1 120 1 250 1 250 1 500 1 500 1 1000 1 1000 1 2000 1 2000 HALF HALF 180 0deg 180 0deg 172 8deg 172 8deg 144 0deg 144 0deg 120 0deg 120 0deg 90 0deg 90 0deg 45 0deg 45 0deg For 50Hz 1 50 For 50 Hz 1 50 1 60 1 60 1 120 1 120 1 250 1 250 1 500 1 500 1 1000 1 1000 1 2000 1 2000 HALF HALF 180 0deg 180 0deg 172 8deg 172 8deg 144 0deg 144 0deg 120 0deg 120 0deg 90 0deg 90 0deg 45 0deg 45 0deg Menu Menu Description Tables 191 Items Adjustable USER Data Saved Range POSITIONS SEL For setting the shutter speed for For 59 94 Hz 1 60 POSITIONS For 50 Hz POSITION6 SEL For setting the shutter speed for For 59 94 Hz 1 60 POSITIONE For 50 Hz MARKER SEL Note USER3 SW By setting the shutter speed on the time axis 1 60 1 100
55. s selected Enabled for any input selected C U F Select the limiter Select whether or not to enable the FRONT AUDIO LEVEL control for the signal selected as an input signal to AUDIO IN CH2 Disabled for any input selected Recording level does not change by turning the volume control Only enabled when FRONT is selected Only enabled when W L wireless is selected Only enabled when REAR is selected Enabled for any input selected Select the microphone low cut filter for input CH1 OFF The microphone low cut filter is disabled for any input FRONT The microphone low cut filter is enabled when the front microphone is selected The microphone low cut filter is enabled only when the wireless microphone is selected The microphone low cut filter is enabled only when the rear microphone is selected Select the microphone low cut filter for input CH2 OFF The microphone low cut filter is disabled for any input FRONT The microphone low cut filter is enabled when the front microphone is selected The microphone low cut filter is enabled only when the wireless microphone is selected The microphone low cut filter is enabled only when the rear microphone is selected The limiter is enabled when AUDIO SELECT CH1 switch is set to MAN Select the limiter The limiter is enabled when AUDIO SELECT CH2 switch is set to MAN Select the level setting method For more information see CH3
56. s setting is canceled when READ FACTORY DATA is selected 190 Menu Menu Description Tables SHUTTER SPEED Items Data Saved Adjustable ange Allocate SYNCHRO SCAN as a shutter speed selectable by the shutter switch SYNCHRO SCAN on Ber SCAN2 Allocate SYNCHRO SCAN2 as a shutter speed selectable by the shutter switch When SYNCHRO SCAN2 has been allocated the speed will only be displayed in seconds Allocate the shutter speed set by POSITION1 SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch Allocate the shutter speed set by POSITION2 SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch Allocate the shutter speed set by POSITIONS SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch Allocate the shutter speed set by POSITION4 SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch Allocate the shutter speed set by POSITIONS SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch Allocate the shutter speed set by POSITION6 SEL in the lt SHUTTER SELECT gt screen as the shutter speed selectable by the shutter switch SHUTTER SELECT Items Adjustable Items Adjustable Data Saved Range Data Saved Range POSITION1 SEL For setting the shutter speed for POSITION3 SEL For setting the shutter s
57. stable Data Saved Range CAMSOFT MAIN Displays the version of the main software for the camera microprocessor Displays the version of the camera block settings table Displays the version of the program for driving the CCD Displays the version of the program for the microprocessor interface FPGA Displays the version of the program for the frame memory control FPGA EEE Fl 6 class IE Items Adjustable Data Saved Range CHAR FPGA Displays the version of the program for the HD signal I O control FPGA DC FPGA Displays the version of the program for the SD signal I O control FPGA DIAGNOSTIC2 Items Adjustable Data Saved Range Display the software version for the system control microprocessor Display the software version for the LCD microprocessor Display the OS version for the streaming controller Display the application version for the streaming controller Display the program version for the streaming control FPGA Displays the version of the program for the PRE RECORDING control FPGA Display the program version for the serial interface FPGA Display the control software version of the AVC I board Display the FPGA program version of the AVC I board isla LCD SOFT EGE P2CS OS OFAR P2CS AP EE SH4CTRL FPGA EE PRCCTRL FPGA ARRE SYSIF FPGA FERE AVC I SOFT Feo alles AVC I FPGA HEEE HOURS METER Items Adjustable Data Saved Range OPERATION Display
58. storing data and only stores data in free locations For scrolling through the CAC files on 7 the SD memory card Select this option For storing data at selected using the cursor Press the jog dial ber Wh CAC file button and then turn the jog dial button EE E already exists at the selected to scroll through the CAC files Humber itis aerrilien TITLE SCROLL 01 For scrolling through the CAC files in the For displaying up to 32 file names each internal memory of the unit Select this up to 27 characters in length option using the cursor Press the jog dial button and then turn the jog dial button to scroll through the CAC files 01 For displaying up to 32 file names each up to 27 characters in length S Ne eee APT O CANCEL For canceling storage of a CAC file read from the SD memory card to the internal 32 202 Menu Menu Description Tables LENS FILE Items Adjustable Data Saved ange FILE NO Select the lens file number READ Read the lens file data WRITE m a Write the lens file data PELE TITLE SCROLL 01 Scrolls through the lens files 59 SRRA KK KKK Up to 12 letters can be set for the title k k k name CARD FILE SELECT For selecting the number of the lens file in the SD memory card For reading the lens file data from the SD memory card For writing the lens file data into the SD memory card For reading the title of the lens file in the SD memory card
59. ting Changes adjustment Result Messages page 86 for more information For selecting the video signals to display in the viewfinder screen Y Brightness signal NAM Output signal with the highest level among R G and B signals Rch signal Gch signal Bch signal For setting the detail level of the viewfinder screen The details of the signals for the viewfinder are further enhanced If 0 is selected then the detail is the same as that for the main line For setting the noise elimination level for detail in the viewfinder signal For selecting the horizontal detail frequency in the viewfinder signal Set the ZEBRA1 detection level IRE value in the Adjustable Range column indicates the preset mode Items Adjustable Data Saved Range ZEBRA2 DETECT SF BRA2 ig Set the ZEBRA2 detection level IRE value Set the ZEBRA2 to ON OFF or SPOT ZE LOW LIGHT LVL OFF Set the camera incoming light volume at which to display LOW LIGHT For the setting to display the menu in the viewfinder screen when the remote control unit is connected to the unit OFF MARKERICHAR 50 Adjust the brightness of markers and characters displayed on the viewfinder Set the units for the SYNCHRO SCAN mode display sec Display using time deg Display using opening angle of the shutter ZEBRA Pattern Display ZEBRA 2 OFF Video Level SPOT ON 109 ZEBRA 2
60. to display in the CAM viewfinder MEM Display the playback image in the playback mode Display the camera image at other times CAM Always display the camera image ACUE VF SEL MONO Select the video signal that is output to COLOR the viewfinder connector MONO Output the Y signal alone to the viewfinder connector COLOR Output the Y PB and PR signals to the viewfinder connector THUMBNAIL ON Select whether or not to output clip OUT OFF thumbnails displayed on the LCD monitor to the MON OUT VBS signal and the REMOTE connector ON Enable output OFF Disable output V Note Even when the MON OUT OUTPUT SEL switch is in the CAM position thumbnails are output when this option is set to ON po SQUEEZE For setting the mode of the down po LT BOX converter output signals Menu Menu Description Tables 173 HD SDI A B OUT MARKER Items Adjustable Data Saved Range MARKER SW _ OFF Switches the marker on and off Items Adjustable Data Saved Range Set the frame marker A OFF B BOTH 3 IC UFR CENTER MARK OFF Switch the center mark 1 OFF 1 2 3 4 Hollow small IEEE R SAFETY MARK OFF Select the frame type for the safety zone OFF 2 1 C U F RI SAFETY AREA 80 The characters are not superimposed The characters are superimposed on the HD SDI A connector The characters are superimposed on the HD SDI B connector The characters are superimposed on the HD
61. ts and disables the LED on the side panel LCD SIDE Enables the LED on the side panel and disables the LED above the slots Enables both LEDs above the slots and on the side panel Select whether or not to hold the UMID GPS position information while the power is turned off thereby keeping this information as status data holding the previous value until the power is turned on again which enables a new measurement to start HOLD Hold and save the data CLEAR Clear the data when the power is turned off and save zero No Info from the next power on until a new measurement is completed Used to specify whether or not to output metadata UMID to HD SDI Select whether or not to forcibly disable the audio output when the SAVE ON OFF switch is set to ON ON Disable audio output OFF Enable audio output Select whether or not to automatically turn off the LCD monitor when the SAVE ON OFF switch is set to ON ON Turn off LCD monitor OFF Do notturn off LCD monitor Menu Menu Description Tables 1 71 REC FUNCTION Items Adjustable Data Saved Range INTERVAL REC ON Sets INTERVAL REC function MODE ONESHOT ON Uses internal memory to perform OFF interval recording ONE SHOT Performs one shot recording for the duration specified under REC TIME and then stops OFF INTERVAL REC is not performed V Note This item cannot be changed when ON is selected in LOOP REC MODE Bede I
62. tting is ON WHITE CLIP LVL 90 Set WHITE CLIP level a Bem stale 8 Set the AUTO KNEE point position in 1 steps This setting is enabled when the OUTPUT AUTO KNEE selector switch is set to CAM AUTO KNEE ON Set the AUTO KNEE level Set the AUTO KNEE response speed The smaller the setting value the faster the response speed For setting the chroma level of the PR signals and the PB signals If this is set to OFF the color elements of video signals are eliminated DRS EFFECT DEPTH Set the compression level of the high brightness component of DRS If the numerical value is larger the compression level of the high brightness component increases For switching the mode on off which enables the dynamic color range to be expanded For selecting the level of the dynamic color range when in the mode which allows expansion of the dynamic color range V Notes e The items indicated by IM are the setting items for PAINT MENU SVW M R W in the lt SD CARD R W SELECT gt screen The items without are the setting items for PAINT MENU LEVEL R W Please refer to SD CARD R W SELECT page 201 for more information e When FILM REC or VIDEO REC is selected in the GAMMA MODE SEL menu option on the lt GAMMA gt screen the KNEE MASTER SLOPE and KNEE MASTER POINT menu option settings are disabled Menu Menu Description Tables 183 nus GAMMA Items Adjustable Data Saved Range
63. ut Menu Description Tables a The following letters indicate whether the modified menu data is Items Adjustable Remarks saved to or read out from the memory Data Saved Range The indicates that the data cannot be saved or read SCAN REVERSE OFF This setting is for correcting an image S Can be saved and read as scene file data ON which has been inverted by a film use C Can be saved or read using SD CARD READ WRITE lens or anamorphic lens attached to U Can be saved and read as user data the unit Please refer to SCENE page 203 and INITIALIZE C page 203 s e u F R F Can be read using READ FACTORY DATA Please refer to INITIALIZE page 203 d b C R Can set whether or not to store changes using the RC DATA SAVE menu option Please refer to Connection of the remote control unit AJ RC10G page 123 b This section shows the adjustable range of the set value and available options for this item c About the settings available for this item 166 Menu Menu Configuration USER MENU MAIN MENU SYSTEM PAINT VF USER MENU is factory set The menu can be configured to suit your preferences by specifying each option according to your purposes and frequency of use through the lt USER MENU SELECT gt screen which is accessible from the MAIN MENU page For more information see Selecting Options for USER MENU page 169 To display USER MENU press the MENU button Allows
64. you to set all options on the settings menu This menu has a category by category structure layered according to purposes and frequency of use To display MAIN MENU press the MENU button for 3 seconds or longer SETTING This option is used to specify recording signal recording system etc This option is used to fine adjust images while monitoring the output waveform of the camera using the waveform monitor Normally this adjustment requires assistance from a video engineer This option may be performed by an external remote control However it is valid when the unit is used as a stand alone device Used to select the information items to be displayed in the viewfinder screen CAM OPERATION Used to change settings according to the conditions for the subject MAIN OPERATION Used to specify recording related items such as audio settings time code battery and P2 card remaining amounts FILE Used to specify file related items such as SD memory card reading writing and lens file settings MAINTENANCE Used to specify maintenance related items USER MENU SELECT Used to edit USER MENU OPTION MENU Provides options which may be needed if functions are added in the future To display OPTION MENU hold down the LIGHT button and press the MENU button J a eisa BENY leg ca b a LIGHT button b Jog dial button c MENU button d SHOT MARKER MENU CANCEL button Menu Menu Conf

Panasonic AJ-HPX3700 Menu Information

Contents

Download Pdf Manuals

Related Search

Related Contents