NewAir AI-400 Series User's Manual
Contents
1. Next drain the water by unplugging the drain cap of the ice dispenser on the back of the unit Reinstall the drain cap of the ice dispenser and tighten it 5 When the machine is not in use for a period of time open both of the water drained caps to drain the water completely from unit PREPARE FOR USE Improper use of the grounded plug can result in the risk of electrical shock If the power cord is damaged please call our customer service 1 Make sure that the unit is not plugged into the main electrical outlet 2 Before placing a water bottle on the unit be sure that the drain cap on the back is tightly fastened 3 Hold the water bottle vertically and upside down over the smart device and place the water bottle into the smart device receptacle Apply slight pressure in order to pierce the bottle cap with the spigot This unit accepts two three or five gallon water bottles with sealed caps that are able to be pierced 4 Open the water faucet to let the air out until the water starts to flow When this happens release the faucet taps 5 Plug the unit into a grounded power outlet Do not plug in before the water can flow out from all of the water faucets DANGER This unit should be properly grounded for your safety The power cord of this appliance is equipped with a three prong plug to be used with a standard three prong wall outlet to minimize the possibility of electric shock Plug your appliance into an exclus2. Faucet Drip Water Tray Ice Entrance Door Tee making Bax Ice snd water tame Can be removed for cleaning Hot Water Fmicet with Children Safty Giard Handle Power Cord Drain cap for ot tank Drain cap for ce dispenser Coupressor condenser and fan motor inside Locate on the base board Operation Step 1 Tarn the shaft of child Safty guard comter clockwisel v Step 2 Push the turned shaft towards the inside Operation Panel Hot Water Indicator Cold Water Indicator Ice Maker Indicator Warning Indicator POWER HOT COLD ICE WARN Power Indicator Hot Water Button Cold Water Button Ice maker Button Main Functions Q Hot water Cold water only ice making only Cold water and ice making at same time Begin Operation UNPACKING THE UNIT e Removing the package Do not turn the unit upside down or lay it on its side a Remove the strap Open the carton box Remove the Styrofoam packing from the box Pull the unit straight up from the box of fo c Remove the plastic bag The refrigeration compressor has sensitive mounts inside of the welded shell for quiet operation Improper handling may damage the compressor e Wipe clean if necessary e Place the unit evenly and gently on a hard and flat surface The location should not be directly in the sunlight or another source of heat e Place the unit where it will receive proper air circ
3. its whisper quiet operation and attractive design you will enjoy convenience and comfort for years to come Please read these instructions carefully before operating When using this appliance always exercise basic safety precautions This easy to use manual will guide you on how to ensure the best use of your unit Please complete the following information for future reference necessary to obtain warranty service Model Number Serial Number Date of Purchase Place of Purchase IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed to reduce the risk of fire electrical shock and injury to persons or property Read all instructions before using any appliance Do not operate this or any other appliance with a damaged cord Connect to properly polarized outlets only No other appliance should be plugged into the same outlet Be sure that the plug is fully inserted into the receptacle Do not run the power cord over carpeting or other heat insulators Do not cover the cord Keep cord away from traffic areas and do not submerge in water We do not recommend the use of an extension cord as it may overheat and become a fire hazard If you must use an extension cord use a minimum size of No 14 AWG and rated no less than 1875 watts If the unit is brought in from outside during the winter allow a few hours for the unit to reach room temperature before plugging i
4. of Ice maki ng box Hot V ter 8C Sensor i HHE n E power M a E wm im Ora X nOY X Cold scil vid ep BR O nso n EN Ez H EE O E L OPERATI ON PCB DC i Iv Jr d T tI ce Fu oio Y XY Detector Z X i Water Level Wat er Val ve for Det ect or Ice maki ng dar y TRANSFORMER Ei Trian Seca H a O Ti Hot Water Temperature Sensor T2 Gondensor Sensor for control i ng f an motor E ect ri cal Di agr am T3 Col d Water Temperature Sensor ICE and Water Dispenser 10 CLEAN YOUR UNIT DURING REGULAR USE After you have used your unit for three or more months we suggest cleaning the unit again Unplug your unit before doing any cleaning or maintenance For the outside enclosure of the unit wash with a soft wet cloth and liquid dishwashing soap Do not use corrosive chemical solvents as this might cause color changes and hurt the machine Do not pour water over the whole shell when washing and avoid getting the electrical parts wet For the hot and cold water dispenser twist the bottle receptacle of the non spill system smart device counterclockwise and pull it up Smart Device Smart Core Water separ ator of the cold tank Col d Tank Take apart the non spill system smart device and smart core showed in above figure and proceed to wash it with the dishwashing fluid rinse and reassemble Empty both tanks hot and cold by unplugging the drain cap of the hot water
5. aad nid C ew PF IA PLEASE READ AND SAVE BEFORE USE USER MANUAL ICE MAKER WITH WATER DISPENSER MODEL AI 400 SERIES Please read this owner s manual carefully before operating the unit TABLE OF CONTENTS INTRODUGCEIONS crucia sues eubobieba Sat FARPEPEVENU S Ced VEM dS PEN RULES 1 IMPORTANT SAFETY INSTRUCTIONS cccccccsescccccscccccssccsecssescecessces 2 GETTING TO KNOW YOUR UNIT cerana nete EYE Ee abra uie dno e eiat 3 VROME TTE 3 Operation panel ccccsssessecceceees 4 MOI JUNCUON dietas ee saca oco c E RERUM Edu US E dE e 4 BEGIN OPERATING THE UNIT eee UnpDUch He WM ssiri n Vesta ee PRAEC A KNAREUR M ERNUND EO 5 Clean your unit before USE ie va dbswewsnei XR eYaa vox S4 isse ER bns VETERA PEU aUa DE 5 Prepare for USE e reena ou va bvEa VovuR sd beo EU OP bat E PV RE eiees 00006 Operate the 7 osc deen M 7 ELECTRICAL DIAGRAM sz iini Ves Sada eame ea o du uEn SEoXOS Sena v asn tl CHR aab bos 10 CLEAN YOUR UNIT DURING REGULAR USE ccce eee 11 TROUBLESHOOTING GUIDE eee nne 13 PRODUCI SPECIFICATIONS sisri eese sus ux yd eaA esa SVEE ETE ERERI ERE LS CONTACT AND WARRANTY vcwurnvastwane Gen cose aba eain oes qux ava ive n e ids 16 INTRODUCTIONS Thank you for purchasing your New Air product designed to improve your life s ease and comfort Not only can you enjoy the ice making function but you can also enjoy cool or hot water With
6. ce Button and Ice Ice making function is not Press the Ice making button Only Ice making only is not working indicator on the turned on by the button control panel cold Cold water function Both Ice making and Wait a few more minutes and stop water functions are running the Cold Water function first together Compressor is not running or Main power supply Voltage too low Contact an electrician or the suddenly stops electricity department Ventilation opening Blocked blocked Clearance Remove the substance blocking the opening around Too small clearance or bad air Leave enough space around the unit circulation Min 15 cm Too dirty produce overheated Clean Refrigerant over charged or Contact with qualified serviceman to leaked the unit Condenser Cooling system repair it Compressor and Breakdown Call a serviceman to check and accessories repair Warm indicator illuminates Water bottle There is no water Replace with a new bottle full of and buzzes water Warm indicator flashes on the Ice making box in The ice making box is clogged Stop the unit and allow some time control panel the ice making by ice or some other for the clogged ice to melt chamber mechanism Water leaks from the taps o
7. eep the unit away from the wall with proper distance Keep it far away from high temperature surroundings and prevent it from being exposed to sunlight or other heat sources Keep the enclosure ventilated and cleared of any obstructions When the unit is not in use for an extended period of time disconnect the power cord and drain the water from both drain caps refastening them tightly when finished Do not touch the faucets at this time in case of leakage Children should not touch the hot water tap as it can burn the skin 12 IROUBLESHOOTING GUIDE If the unit is not working properly please reference the following table PROBLEM CHECK PROBABLE REASON SOLUTION Hot and cold water Main Power Supply At OFF position Move to ON position ice maker are all not available and the POWER switch in your home Power plug Circuit breaker indicator isn t illuminated on Not on the power outlet Tripped Blown out Plug it the control panel Check and reclose Main Fuse Replace Power breakdown Main electrical power supply Wait until the main power supply resumes Transformer Call the electrician or serviceman to Unplug or breakdown the PCB Controller perform maintenance Fuse on the PCB board Hot Water Button Blown out Call the electrician or serviceman to replace it with same rat
8. ial or workmanship The repairs under warranty may only be carried out by an authorized service centre When making a claim under the warranty the original bill of purchase with purchase date must be submitted The warranty will not apply in cases of Normal wear and tear Incorrect use e g overloading of the appliance use of non approved accessories Use of force damage caused by external influences Damage caused by non observance of the user manual e g connection to an unsuitable mains supply or non compliance with the installation instructions Partially or completely dismantled appliances WARNING WARNING Keep ventilation openings in the appliance enclosure or in the built in structure clear of obstruction WARNING Do not damage the refrigerant circuit 16
9. ing Only hot water not available Hot water function 1s not turned Press the Hot Water button and Hot Water on by the button on the control indicator panel Hot water use Wait for a moment until the hot The preceding amount of hot water is too much water comes out Hot water sensor Breakdown Call the serviceman to replace with a new unit Cold Water Button Cold water function is not Press the Cold Water button and Cold Water indicator on the Only cold water not available turned on control panel Cold Water use Wait for a moment until cold water The preceding mount of cold water is too much comes out Air clearance The apparatus is insufficiently Space the unit from the wall by between the unit ventilated more than 15 centimeters on each and the wall side Water separator in The cold water separator has Replace the water isolator at the the cold tank moved in the cold water tank correct position Water bottle The temperature of water Put the water in a supplied in the bottle is too shady cool place high This occurs when the bottle 1s exposed to direct sunlight for a long time ice making Both ice making and cold Wait a few minutes after stopping water functions are running at the ice making function same time 13 I
10. ive properly installed and grounded wall outlet Under any circumstances do not cut or remove the third ground prong from the power cord Any questions concerning power and or grounding should be directed toward a certified electrician This appliance requires a standard 110 120 volt 60 Hz electrical outlet with three prong ground 6 If the unit is brought in from outside during the winter allow a few hours for the unit to reach room temperature before plugging in OPERATE THE UNIT After plugging into the main power outlet the POWER indicator on the control panel will be on This indicates you are ready to begin operating the hot and cold water or ice making functions as desired Hot Water Operation Hot Water Indicator Warning Indicator Power Indicator Hot Water Button Press the Hot Water button and the green Hot Water indicator above the button will begin blinking meaning that the heating element has begun to work When this green indicator illuminates this means that the hot water has reached the desired temperature and is drinkable After awhile drain out the hot water from the hot water faucet and the Hot Water indicator will begin blinking again meaning that the heating element has been initiated If the hot water tank is empty after the first use or after being drained wait a few minutes and a warning sound will go off ten times along with an indicator light When the water bottle is replaced press
11. n Do not let hot water touch bare skin Exercise caution and use supervision when the appliance is used near children Do not use your unit outdoors Place on an even or flat surface to avoid hazard due to instability of the appliance Do not place the unit in direct sunlight and make sure that there is at least 2 inches of space between the back of your unit and the wall Keep a minimum distance of 4 inches on each side of your unit Do not tip the unit over Do not use other liquids besides water to make ice cubes or to dispense cold drinks Always turn off and unplug the unit when there is no water left in the bottle or when you are changing the bottle Turn it back on after a new bottle has been placed inside and when the air is purged from the water taps Unplug the unit before cleaning or making any repairs servicing Do not clean the unit with flammable fluids The fumes can create a fire hazard or explosion Disconnect the main plug from the supply socket when the unit is not in use or you are traveling The supply connection is through the main plug WARNING This appliance must be grounded IMPORTANT The wires in the main lead are colored in accordance with the following codes Green or Green with Yellow strip Grounding White Neutral Black Live GETTING TO KNOW YOUR UNIT Unit Outline Smart Device for Water Bottle Top Cover Operation Panel Hot Water Faucet b a HO CD CED RA Cold Water
12. r Water faucet button The water faucet button may be Check it and let the button go out the faucet clogged Water faucet The water faucet has been Call your service or sales agent for damaged replacement information Water is dripping out of the Water bottle The bottle may have small Change to a new bottle water dispenser and onto the pinholes floor Water drain caps on the back Tighten these completely and check the sealing silicon material inside the drain cap to make sure it is not torn or damaged If so change to new drain caps Floor The appliance is not level Install it evenly and lock the unit Locating position Contact with other products Move it away from other products Noise occurs PRODUCT SPECIFICATIONS Model Power Supply Ice Making Capacity Cold Water Capacity Hot Water Capacity SE Ice Making Ice Harvest Current Cold Water Current Refrigerant and Quantity Design Pressure High Side Design Pressure Low Side HMM NNNM TEST CONDITION Water Temperature 77 F Room Ambient 77 F As UL standard requirement 104 F Room Ambient 15 WARRANTY The manufacturer provides warranty in accordance with the legislation of the customer s own country of residence with a minimum of 1 year starting from the date on which the appliance is sold to the end user The warranty only covers defects in mater
13. tank at the back of the unit Next clean the inside parts of the water dispenser system with vinegar or a 2 citric acid solution to remove mineral scaling from the water Rinse well and then open the drain cap from the hot water tank to remove all of the water Replace all of the parts and securely fasten the drain cap It is important to let the unit dry for two hours before plugging it back in When finished reinstall the bottle receptacle smart device For the ice making chamber remove the ice and water separator and the ice storing plate by unscrewing the screw according to the following figure 11 Ice and Water Separ at or Ice Stori ng Pl ate Next you can wash the inside parts of the ice making chamber with the dishwashing fluid rinse and open the drain cap for the ice dispenser on the back This will get the water out Rinse several times and then securely return and fasten the drain cap Immerse the removed ice water separator and ice storing plate in the dishwashing fluid to clean After rinsing and drying install both of these back to the original position with a screw and screwdriver PRECAUTION When cleaning the outside of the machine can be washed with a wet soft cloth but do not use corrosive chemical solvents as this may hurt the machine and alter its color Be careful not to pour water over the enclosure when washing avoiding its internal electrical parts These should not get wet K
14. the hot water button again to begin heating and to turn off the warning indicator If you do not want hot water please press the Hot Water button again to save electricity and cost After this the Hot Water indicator will be off Cold Water Operation Warning Indicator Cold Water Indicator Power Indicator HOT Cold Water Button Press the Cold Water button to begin the cold water function After this the Cold Water indicator will blink meaning that the compressor has begun cooling the water When the Cold Water indicator changes from blinking to illuminating the cold water has reached the desired temperature and the cold water is ready After awhile or when the cold water is drained from the cold water faucet the cold water indicator will begin blinking again indicating the cooling process has begun The Cold Water function and the Ice making function can be operating at the same time Ice making Operation Power Indicator l1ce Maker Indicator Warning Indicator POWER HOT D X ICE WARN o gt x O O O Q lce maker Button l Press the Ice maker button on the operation panel to begin the ice making cycle The Ice maker indicator will start to blink 2 The ice making cycle lasts 7 to 15 minutes depending on the ambient temperature we While the ice maker is on the unit will verify the water level periodically If there is not enough water to make ice the ice maker
15. ulation and make sure that there is atleast 2 inches between the back of the unit and the wall Keep a minimum distance of 4 inches between each side of the unit e The appliance must be positioned so that the plug is accessible e Fasten the drain cap tightly on the back of the unit before running as during the shipping process it may be loose If it is not fastened properly water leakage may occur e Do not plug the power cord into the power socket before further reading instructions This unit 1s for indoor use only Room temperature should not exceed 97 Degrees F 36 Degrees C CLEAN BEFORE USING Before using your unit it is strongly recommended that it is cleaned thoroughly 1 Take out the accessory ice shovel from the ice making chamber 2 The outside of the unit should be cleaned regularly with a mild detergent solution and warm water 3 For the first time hold the clean water bottle vertically and upside down over the smart device and place the water bottle into the smart device receptacle After a few minutes water will flow into all of the faucets and the cold and hot water tank until the water is able to flow from the faucet Then take down the water bottle and open the drain cap for the hot tank Let all of the water flow out and then reinstall the drain cap and tighten it 5 4 Clean the ice making chamber with diluted detergent warm water and a soft cloth Then use water to rinse the inside parts
16. will stop automatically and the Warning indicator will turn on meaning that the water level will not be able to reach the required level for ice making 4 The ice maker will automatically stop working when the unit is full of ice and the Ice maker indicator will switch from blinking to illuminating 5 Make sure to keep the water in the tank clean If the unit is not in use for a long period of time make sure to take down the water bottle and drain out all of the water from both the drain port and from the back of the unit 6 How to get the ice Open the ice door at the front of the unit and use the ice scoop included with your purchase to take the ice from the unit Note When you turn on the cold water and the ice making operations at same time you should wait a few minutes to allow the water temperature in the cold tank to return to normal temperature If the cold water temperature goes up again use the cold water from the cold water faucet and the unit will switch to Cold Water operation again after the present ice making cycle finished ELECTRICAL DIAGRAM Start lis Rei ay Solenoid i Valve for ice Fan Motor for harvest Condenser COMPRESSOR L ee Over oad Prot ect or Q Stepping Motor ICE V THAWV FAN For Ice shovel 9t eran ale Compressor HEAT N ACHL Rel ay i Rel ay Rel ay L Rel ay Rel ay Ni POWER SUPPLY PUMP WATER VALVE 55551 ui pg ee Mcro Swtch for Detecti ng the set posi ti on
Download Pdf Manuals
Related Search