Miele Little Giant PT 7135 C Operating and Installation Instructions
Contents
1. 25 Frequently asked questions 28 After sales service 34 Optional accessories is e002 ieee eee Eu dene quede E RE eas 34 INSTALLATION INSTRUCTIONS 35 IMPORTANT SAFETY INSTRUCTIONS 36 Installation 2o ose eee eye dct doe ege oe ce ee dies doses 37 External drainage of the condensed water 41 Electrical connection 2s sae CER RS e xU ego ku dore b cien s oa 42 Technical Data 43 Caring for the environment 44 Settings M 45 Opening the menu Settings 46 Language Maes rat nthe aap es at cee ite as ada ME E DM 47 Settings Supervisor level 49 IMPORTANT SAFETY INSTRUCTIONS N WARNING To reduce the risk of fire electric shock or injury to persons when using your appliance follow basic precautions including the following LL P It is essential to read all instructions before using this appliance N This machine conforms to current safety requirements However inappropriate installation and use can lead to personal injury and property damage Read the operating and installation instructions carefully2. The load size is the dry laundry weight Program guide Woollen handcare Load size 5 5 lbs 2 5 kg Items Woolen fabrics Note Woolen items will be loosened up and fluffed in a short time but not completely dried Remove the items immediately after the program ends and allow them to air dry Smoothing Load size 6 6 lbs 3 0 kg Items Cotton or linen fabrics Permanent Press items of cotton mixed fabrics or synthetics e g khakis shirts etc Note Program to reduce creasing after spinning in the washer Remove the items immediately after the program end and allow to air dry Cool air Load size 15 lbs 6 5 kg Items To air items Warm air Load size 15 lbs 6 5 kg Items Final drying of multi layer fabrics with unique drying characteristics e g jackets pillows and large textiles Drying of single items beach towels bathing suits etc Note Select Low temp for items with the fabric care symbol KJ Do not select the longest drying for the first run Check by testing which time is most suitable 16 Program guide Jeans Load size 7 7 lbs 8 5 kg Normal Hand iron 4 Items Denim fabric items pants jackets skirts or shirts etc Shirts Load size 5 5 lbs 2 5 kg Normal Hand iron 4 Items Shirts and dress shirts Outerwear Load size 7 7 lbs 8 5 kg Normal
3. 32 Frequently asked questions Changing the light bulb The light bulb must not exceed NTo reduce the risk of electric the maximum wattage listed on the shock disconnect the appliance data plate from the power supply by unplugging or tripping the circuit m Replace the light bulb with a new breaker one m Flip the light bulb cover upwards and press it firmly into the left and right The bulb cover is located along the sides until it clicks into place m Open the door A Make sure the bulb cover is securely closed to prevent a short circuit from penetrating moisture upper rim of the drum opening m Slide a screwdriver with a wide head underneath the side edge of the bulb cover and twist see illustration m Flip down the bulb cover m Replace the light bulb with a temperature proof bulb available from Miele 33 After sales service In the event of a fault which you cannot fix yourself please contact the Miele Technical Service Department at the address on the back of this booklet When contacting the Service Department please quote the model and serial number of your appliance They can be found on the data plate located below the drum opening 34 The PC indicator allows a service technician to check and update the drying programs The update allows future developments of fabrics detergents and drying programs to be incorporated into the machine s ele
4. N The machine may not be operated without the lid in place The dryer must be level to ensure safe and proper operation 40 Installation External drainage of the condensed water The condensed water is pumped away through the drain hose which is located at the back of the dryer at the bottom Drain hose length G 6 3 4 2 m Drain pump height 3 3 3 8 1 m N Do not pull on the drain hose and do not allow it to become kinked as this could cause damage Drain hose connection 1 Direct into a sink or basin Hook the hose over the edge and secure Use the bow shaped guide see illustration on the right 2 Connected securely to a floor gully 3 Connected directly to a sink drain Connection to a sink drain To connect the drain hose to a sink drain you will need to use the adapter and hose clip located at the back of the dryer at the bottom m Remove the adapter 1 and the hose clip 3 behind it m Secure the adapter 1 to the sink drain using the nut 2 m Secure the drain hose with the hose clip 3 to the nut 41 Installation Electrical connection This installation should be performed by an experienced and qualified technician in accordance with local codes and regulations GROUNDING INSTRUCTIONS This appliance must be grounded In the event of malfunction or breakdown grounding will reduce the risk of electric shock by providing
5. The programs Woollen handcare and Smoothing do not have a cooling down phase 7 At the end of a program Anti crease if selected and End mark the end of a program in the display During the anti crease phase the drum will turn in intervals if the laundry is not immediately removed from the dryer to prevent the laundry from wrinkling Run time 1 h m Use the o button to open the drum door m Remove the laundry Check the drum for any missed pieces of laundry Any items left in the dryer can be damaged because of over drying If the door stays open the light goes off after a few minutes saving energy m Close the door Cleaning and care hints m See Cleaning and Care Use Coin mechanism For coin mechanism operated machines Money or tokens will be lost when the door is opened after program start or when canceling a program Technical Service can set a time frame when a program can be changed Canceling a program m Press the button Cancel The laundry is cooled down m Press Cancel once more and End is displayed m Press the oa button m Open and close the door m Select the new program m Press the Start button 14 Adding removing laundry during a drying program m Press the oa button m Open the door NDo not touch the rear of the drum while adding or removing items Danger of burns due to high temperatures in the drum m Add or remove items m Close t
6. 12 6 Starting a program Start flashes when the program can be started m Press the Start button The Start button lights The display shows Program start and then Drying with the program duration The drying levels are displayed e g machine iron hand iron etc m Press one of the following buttons during the running program Button Timer The time of day and the approximate program end is displayed Button Save The currently running program can be saved as a Favorite Button Cancellation To cancel the currently running program Use Remaining time When a program is selected the approximate duration is displayed This is the remaining time The program duration can vary due to some factors residual moisture after spinning fabric load size room temperature and voltage fluctuations The adaptive electronic adjusts to the individual load to display the accurate remaining time The remaining time is constantly checked which can lead to leaps in time The Woolens handcare and Smoothing programs can be ended ahead of time once a certain temperature is reached This may be the case with fine fabrics or if the dryer had some residual heat from a previous program Before the end of a program After drying with hot air the cool down phase finishes the program Cooling down is displayed Only after the cooling phase has ended is the program finished
7. factory default If a wrong code is entered three times the code entry will be locked for 1 hour nter code m Turn the jog shuttle until the first digit shows Confirm the digit Enter the second and third digits Please confirm code m Confirm the code 49 Settings Supervisor level Language The display contents can be shown in different languages The fixed default language can be set in the submenu Language P m Select the desired language and confirm with OK Sort languages The order of the first 4 languages in the display can be set when the option Language menu international or Language menu International 4 languages is selected Supervisor level The access code for the supervisor level can be changed m Enter the old code m Enter the new code Once the new code is confirmed the display will show the beginning of the Settings menu 50 Controls The controls can be set to the Default Setting or laundromat version WS KW buttons simple WS KW Waschsalon Kurzwahltasten Laundromat Direct select buttons The laundromat version displays the four pre set favorite programs which cannot changed by the user The use is simplified by the direct select buttons 4 m Select the four favorite programs first before activating the laundromat version see Favorites N WARNING When selecting the laundromat version and exiting the Settings Supe
8. Hand iron 4 Items Outdoor clothing suitable to dry in a tumble dyer Proofing Load size 5 5 lbs 2 5 kg Items For dryer suitable items e g ski and outdoor clothing tablecloths and poplin items Note This program has an additional step for water proofing Water proofed items must only be treated with a water repellant that is Suitable for membrane textiles These chemicals are based on flourochemicals Do not dry items which were treated with agents containing paraffin This is a fire hazard Toweling Load size 14 3 Ibs 6 5 kg Normal Items Terry laundry e g towels beach towels bath robes Timer The timer allows the user to select the time of day for the program end The program start can be delayed from 30 minutes to 24 hours Select the submenu Timer Cottons Marrmal t Low temp Duration 1 47 h Low temp Timer di Back bd bd bd m Press the direct select button C2 The Timer menu shows Select the time Cottons Maorrnal Low temp Start Finish m Select the desired program end time with the jog shuttle and confirm The program end time is adjusted to the next full or half hour The program start will be delayed in accordance with the desired program end time Starting the timer function m Press the Start button The elapsed time is displayed and will count down in minutes The drum turns briefly every hour to prevent creases Canceli
9. a path of least resistance for electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded 42 The dryer comes with a power cord and NEMA L6 20 plug The machines is supplied for a connection to a 2 AC 230V 60Hz 2x16A Single Phase Supply The machine must only be connected to the voltage and frequency shown on the data plate Technical Data Height Width Depth Depth with the door open Weight Drum Maximal load Power cord Fuse rating Rated load Fuse rating Light load Maximum floor pressure during operation Noise level 33 ue 250 mm adjustable 7 mm 23 7 6 595 mm 2T ie TOO mn 46 1 188 mm 128 lbs 58 kg 28 6 gal 130 I 14 3 lbs 6 5 kg Dry laundry weight 63 1 6 m see data plate see data plate see data plate see data plate approx 159 Ibs 72 kg 70 dB A 43 Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during
10. accordance with all local codes and ordinances NWARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Contact a qualified electrician if you are in doubt as to whether the appliance is properly grounded P Do not modify the plug provided with the appliance if it will not fit the outlet have a proper outlet installed by a qualified electrician P Before this appliance is removed for Service or discarded remove the door to the drying compartment SAVE THESE INSTRUCTIONS Guide to the dryer Control panel O 2 3 5 Display 4 Optical interface PC See the following pages for more Allows a service technician to check information and update the drying programs 2 Direct select buttons 8 Jog shuttle To select a drying program directly Turn to select You can also save Favorite drying Press to confirm the selection programs on these buttons Gros buen 3 Start button To open the drum door Contents in the display will vary with program offering Guide to the dryer Display function Contents in the display will vary with program offering Main menu Cottons IMinirnum iron Settings F Woollens handcare Smoothing 10 00 The display shows the main menu with factory default settings Program selection is highlighted If the display is dark in Stand by mode turn the jog shut
11. on the heat exchanger to the vertical position 25 Cleaning and Care If you cannot see any fluff m Replace the heat exchanger unit see following page If you can see some fluff m Clean the heat exchanger unit as described below Cleaning the heat exchanger unit m When rinsing the heat exchanger unit make sure you position it as shown in the next two illustrations m Pull the heat exchanger unit out of its housing by the handle Checking the heat exchanger unit m Use a shower head or similar to rinse the unit out as shown m Hold the heat exchanger unit up to the light as shown m Check to see if there is any fluff inside it The arrows in the illustration above indicate where to look 26 Cleaning and Care When replacing the cover after cleaning ensure that the rubber seal fits correctly into the groove m Replace the cover making sure the hooks locate correctly Hold it at an angle and push it gently downwards m hen turn the lever upwards into the horizontal position to lock the cover m Replace the service panel and press the upper edge until it clicks into position m hen flush the unit through from the front ANI is important to ensure that both the heat exchanger unit and the cover are correctly positioned and locked otherwise water may leak from the machine m Check the heat exchanger unit again for any visible fluff and if necessary flush i
12. over hang with transport grips arrow 2 Stand optional accessory 38 Top view The Miele dryer can be installed as part of a washer dryer stack in combination with a Miele washer An appropriate stacking kit available from Miele is required Installation of the stacking kit must be completed by a Miele Service Technician Installation Installation on a cement base m Secure the front feet of the dryer with retaining clips on the cement base Coin mechanism The dryer can be equipped with a coin mechanism optional accessory Miele s Technical Service will install the coin mechanism and program the electronic Empty the coin mechanism regularly to avoid jams Do not install devices to automatically turn the dryer off e g clock timers 39 Installation Installation N Do not install a lockable or slide door in the pivoting area of the dryer door Transporting the dryer to the installation site The rear overhang of the lid has transport grips m Use the front dryer feet and the rear overhang to transport the dryer from the packaging base to the installation site m The machine can be leveled by turning the legs clockwise or Level the dryer counterclockwise as necessary The appliance is not intended to be mounted in a wall or other vertical surface of a building or cabinet The unit is allowed for built in application
13. the correct way m Replace the filters in the door opening by first inserting them at the bottom and then pressing them into place at the top m Lock both catches you will hear them click 23 Cleaning and Care Cleaning the exterior and the control panel N To reduce the risk of electric shock disconnect the appliance from the power supply by unplugging or tripping the circuit breaker Do not use an abrasive cleaner glass cleaner or all purpose cleaner They will damage the dryer NDo not hose the dryer down m The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge Wipe dry using a soft cloth m Stainless steel parts can be cleaned with a non abrasive stainless steel cleaner Wipe clean with a soft cloth 24 Cleaning and Care Cleaning the heat exchanger N Check the heat exchanger unit regularly It should always be cleaned immediately the Clean heat exchanger or Clean out airways message appears Removing the heat exchanger m Open the access panel m Turn the lever on the inner cover downwards to the vertical position m Pull the cover forwards m Remove it by pulling it diagonally upwards The hooks at the side will prevent the panel from falling off m Now remove the panel by pulling it diagonally upwards m Then place it to one side m Turn the lever
14. was a power failure 29 Frequently asked questions Other faults What if Possible fault Solution The In some cases Clean out airways is displayed Check all the program possible causes and open and shut the dryer door runs toO ventilation to and from the Open a door or window while the long or dryer may be insufficient machine is in operation for increased air stops e g because it is installed flow in a small room This has caused the temperature in the room to rise sharply The lint filter is clogged Remove the lint with lint or were still wet THe lint filters must be completely dry when they were replaced The vents below the door Remove any objects that are blocking are blocked the vents The exhaust hose or the Check the exhaust parts regularly connection is clogged with e g wall vent duct louvered wall lint or were still wet when vent bends etc for air permeability they were replaced Remove the lint The filters must be completely dry Detergent residues hair Check the heat exchanger from time to and fine fibers can block time and clean it if necessary the heat exchanger The laundry was not spun Spin laundry thoroughly at the sufficiently in the washer appropriate speed before drying The dryer has Regard the maximum load size per over loaded program Metallic zippers prevent a Open the zippers of the laundry c
15. Miele PROFESSIONAL Operating and Installation Instructions Condenser Dryer PT 7135 C To prevent accidents en US and machine damage read these instructions before installation or use M Nr 10 037 980 Contents IMPORTANT SAFETY INSTRUCTIONS 3 Guide to the dryer 6 Controlpanels 1 e cts ees Shoe one EAN pi dir ete aride 6 Display function 7 Before using for the first time 9 UL ee de ee 10 Fabie care labels 2 ie ebbe dere Dh be bed Pade init eat 10 DIVING tips is Lee d age dane bee date qd pea Re dap tbe ed oo 10 COIN MECHANISM 1542 near loue eo Race qom RR ER A DAR See RR UR in d an 14 Canceling a program 6 eee 14 Adding removing laundry during a drying program 14 Program guide secre pie neta lieues EL Deep ewe ee dus 15 TIME TIT 18 LICET 19 Selecting Changing a Favorite 19 LOMME deem t edge EROR er Deed x ea Nod PER Ea Race 21 Saving a Favorite oe vend Sat peed pied hee head aba babes Pee 21 Cleaning and Care 22 Cleaning the lint filters 2 22 Cleaning the exterior and the control panel 24 Cleaning the heat exchanger
16. See Settings Supervisor level Cleaning the airways To delete the message Confirm with OK If the problem persists contact Miele 28 Frequently asked questions What if Possible cause Solution At the end of a The dryer reminds you to Clean the heat exchanger program clean the heat To delete this message Maintenance exchanger Confirm with OK message or Clean the heat You can adjust the See Settings Supervisor level exchanger setting which controls Cleaning the heat exchanger appears when or if the Maintenance message appears Clean out airways The dryer does not work at its optimum or not efficiently Possible cause clogging by lint or detergent residues Cleaning the lint filters in usually all that is required However if the Clean the airways message does not go out after you have cleaned them then also check all the possible causes described under The program runs too long or stops To delete this message Confirm with OK You can adjust the setting which controls when or if the message Clean the airways appears See Settings menu Clean the airways Dir ain fault The drain hose is kinked Remove the kink To delete the fault message Confirm with OK Program finish time changed This is not a fault While the timer was counting down the settings were changed or there
17. ate fabrics with the fabric care symbol KJ with the Low temperature option Open jackets to allow even drying Starched laundry can be dried in the tumble dryer The amount of starch should be doubled during the wash Wash new colored items before drying for the first time and do not dry with light colored items These fabrics can bleed also onto plastic parts of the dryer Colored lint may also get on the light colored items 10 Wool and wool blends tend to felt and shrink Dry wool and wool blends in the Woollen handcare program The fine fabric of down filled items tend to shrink Dry these items in the Smoothing program Dry pure linen items only if it is recommended on the fabric care label The surface of the fabric may become rough Dry these items in the Smoothing program Knitted fabrics e g T Shirts and underwear tend to shrink when washed and dried for the first time Do not overdry these fabrics Permanent press and delicate fabrics tend to crease more the bigger the load size For better drying results reduce the load size or select the Shirts program Use 1 Sort the laundry 2 Load the laundry m Loosen up the washed laundry m Use the o button to open the drum m For even drying results sort by Lu desired dryness fiber fabric size m Load the laundry loosely into the and residual moisture after spinning drum Do not dry items that may melt or Do not overloa
18. before using this machine The manufacturer cannot be held responsible for damage caused by non observance of these Important Safety Instructions Keep these operating instructions in a safe place and pass them on to any future user D The tumble dryer is only intended for drying fabrics washed in a water solution Check fabric care labels to verify materials can be machine dried P Before maintenance or cleaning and care disconnect the dryer from the electrical supply pulling the plug or tripping the circuit breaker P Make sure that no unattended children can access the machine There is a potential danger that children can be trapped in the drum This may cause major injuries or the death of the child P Do not reach into the dryer if the drum is moving P Do not install or store this appliance where it will be exposed to the weather P Do not tamper with the controls P Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these operating instructions Repairs to electrical appliances should only be performed by qualified personnel Incorrectly repaired machines may pose a considerable risk to the user P Clean the lint filter before or after each load P Keep the area around the exhaust opening toe kick and adjacent surrounding areas free of lint dust and dirt D The interior of the machine and exhaust duct should be cleaned per
19. ck setting m Select the hour with the jog shuttle and confirm Select the minutes and confirm The time of day is saved 47 Settings P Contrast Brightness Display contrast and brightness can be adjusted in 10 levels The bar shows the selected level Standby The display goes into standby mode after 10 minutes and the Start button flashes slowly to save energy on Standby is turned on when no program is selected after pressing the Start button at the end of a program not during current program default setting Standby is turned on when no program is selected Pressing any button or turning the jog shuttle turns the display on again off The display stays turned on 48 Lengthening the cooling time The cooling phase can be lengthened before the program is started The laundry will be cooled The bar shows the selected level Delivery status 0 minutes normal cooling down phase The program duration is extended respectively The cooling time cannot be extended in the programs Warm air Cool air Woollen handcare Smoothing Settings Supervisor level The menu Settings Supervisor level is locked with a code to prevent unauthorized access except Language It must be activated by Technical Service Settings Back 4 Supervisor level Access via code m Select Access via code and confirm Entering the code m Enter the code 0 0 0
20. ctronic control Optional accessories Optional accessories are available from Miele INSTALLATION INSTRUCTIONS To prevent accidents and machine damage read these instructions before installation or use IMPORTANT SAFETY INSTRUCTIONS N WARNING Risk of Fire P To reduce the risk of severe injury or death follow all installation instructions P Clothes dryer installation must be performed by a qualified installer P Install the clothes dryer according to the manufacturer s instructions and local codes P Check the packaging the dryer and accessories for any signs of damage Do not use a damaged appliance b Repair and maintenance work should be performed by a Miele authorized service technician Work by unqualified persons could be dangerous and may void the warranty P Before installation disconnect the dryer from the electrical supply by shutting off the power unplugging the power cord or tripping the circuit breaker Do not restore power until installation is complete D GROUNDING INSTRUCTIONS This appliance must be grounded In the event of a malfunction or breakdown grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be inserted into an appropriate outlet that is properly installed and grounded in acc
21. d the drum ignite in the dryer such as plastics Overloading strains the fabrics and rubber or sneakers They could melt results in poor drying and damage the laundry Check hems and seams be sure that no filling can come out Comforter covers and pillowcases should be fastened in order to prevent small items from getting trapped inside of them Close zippers hooks and eyelets Tie fabric belts and apron ties Remove or sew up released bra underwires To prevent fabric damage check that laundry is not caught in the closed door Do not use softener sheets in this dryer Silicates contained in these sheets could cause the dryer to overheat m Close the door with a firm swing or lean against the dryer and push it closed Use 3 Select a program Two program selection possibilities m Select a Favorite by pressing the respective direct select button or m Select from the Program selection menu by turning the jog shuttle 4 Select Low temp and or Timer m f desired select Low temp and or Timer from the respective submenus Note The displayed duration remaining time can vary with every new program selection 5 Insert coins if operated by coin mechanism m f a coin mechanism operates the machine please regard the displayed request to pay If the door is opened after the program has started or if the program is canceled the credit is lost
22. he door Continue drying m Press the Start button Note When the program cycle is changed the displayed remaining time may differ from the actual drying time Program guide Programs may vary depending on the offerings of your machine Cottons Load size 15 lbs 6 5 kg Extra dry Normal Normal Items Single and multilayered cotton and linen laundry e g terry towels beach towels bath robes T Shirts underwear cottons bed linens baby clothing etc Note Select Low temp for items with the fabric care symbol KJ Select Extra dry for multilayered and thick items The Extra dry program should not be selected for jersey materials Items may shrink Hand iron 4 Hand iron Machine iron Items Cotton or linen fabrics to be left damp for easier ironing e g table cloths bed linen starched laundry etc Note Select Low temp for items with the fabric care symbol KJ Roll up items until they are ironed to keep them moist Minimum iron Load size 7 7 lbs 3 5 kg Normal Normal Hand iron 4 Items Permanent Press items of cotton mixed fabrics or synthetics e g sweaters dresses pants table cloths etc Note Select Low temp for items with the fabric care symbol KJ Select Hand iron for crease free drying and reduce the load size to 3 3 Ibs 1 5 kg Items will be dried wrinkle free depending on fabric and load
23. iodically by qualified personnel P Only use genuine Miele accessories and replacement parts If other parts are used warranty performance and product liability claims may become void IMPORTANT SAFETY INSTRUCTIONS P To prevent the risk of fire the following articles must not be dried in this tumble dryer items which have not been washed items such as workwear which have not been thoroughly cleaned and are still soiled with grease oil or other substances such as cosmetics lotions etc If items have not been thoroughly cleaned there is a danger that they could ignite when heated even after they have been removed from the dryer at the end of the program items that have been previously cleaned washed soaked or spotted with gasoline dry cleaning solvents wax wax remover chemicals for buffing e g mops and floor cloths or other flammable or explosive substances They may give off vapors that could ignite or explode items which have been spattered with hair spray nail polish remover or similar substances D When washing heavily soiled items ensure that you use sufficient detergent and select a high temperature If in doubt wash the items several times P To prevent the risk of fire the following articles or items must not be dried in this tumble dryer fabrics which contain a large amount of rubber foam rubber or rubber like materials For example products made f
24. ng the timer m Press the button to cancel the timer m Press it once more to get back to the main menu 18 Favorites The dryer has the option to save the most used drying programs on the direct select buttons The option Save must be selected in Settings Supervisor level Contact Technical Service for access to this level Selecting Changing a Favorite m Close the door Main menu Cottons hinirnur iron Settings P Woollens handcare Smoothing 10 00 m Press the button Basic menu Cottons Harrnal Duration 1 16 h Low temp Timer ch Save Back bd v v v m Turn the jog shuttle to select the component you would like to adjust program Cottons or the drying level Normal m Press the jog shuttle to confirm the selection Favorites Depending on the selection the display shows one of the following submenus Select a program Program Back selection Minimum iran Woollens handcare m Select the desired program with the jog shuttle and confirm Important If no selection is made in the submenu the display will switch back to the basic menu after 20 seconds Drying level programs Cottons Mormal Drying levels from Machine iron Extra dry AT LL m Select and confirm the desired drying level with the jog shuttle The display shows the drying level range of each program Program Warm air Cool air Warm air Finish Duration m The du
25. of fabrics The lint is collected in the lint filters and can be easily cleaned see Cleaning and Care 31 Frequently asked questions What if Possible cause Solution A program cannot be started the display remains dark The fault cannot be detected immediately Is the dryer connected to the power mains s the door closed Are the fuses blown The drum light does not come on The light turns off automatically energy saving After closing and opening the door the light comes back on The bulb may be bad or burnt out Change the light bulb See Dryer Care The display shows a foreign language A different language was selected under Settings Language F Select the desired language The flag symbol leads you to the setting The Start indicator flashes when selecting a program This is not a fault It indicates that the program can be started After the program is started the indicator lights steadily The display is dark the ring of light around the jog shuttle does not light The Start indicator flashes slowly The display and the program selector go into Standby mode to save energy Press any button to turn the display and jog shuttle back on If pressing a button does not bring the display and light back on a fault has occurred Contact the Miele Technical Service Department
26. ogram Cool air can be provided free of charge free factory default 53 54 55 Please have the model and serial number of your appliance available before contacting Technical Service U S A Miele Inc National Headquarters 9 Independence Way Princeton NJ 08540 Phone 800 843 7231 609 419 9898 Fax 609 419 4298 www mieleusa com Technical Service amp Support Nationwide Phone 800 999 1360 Fax 888 586 8056 TechnicalService mieleusa com Miele www miele shop com Canada Miele Limited Headquarters and Showroom 161 Four Valley Drive Vaughan ON L4K 4V8 Phone 800 643 5381 Fax 905 532 2290 www miele ca professionalQmiele ca commercial enquiries MieleCare National Service Phone 800 565 6435 905 532 2272 Fax 905 532 2292 customercareQmiele ca general and technical enquries All rights reserved 5014 M Nr 10 037 980 00 INFORMATION IS SUBJECT TO CHANGE PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS TECHNICAL amp WARRANTY INFORMATION
27. ordance with all local codes and ordinances 36 D WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician service representative or personnel if you are in doubt as to whether the appliance is properly grounded P Do not modify the plug provided with the appliance If it will not fit the outlet have a proper outlet installed by a qualified electrician P Do not use an extension cord to connect this appliance to the power supply Extension cords do not guarantee the required safety of the appliance e g danger of overheating D The installation of this unit in non stationary locations e g ships must be performed by a qualified installer or service agency in strict accordance with national and local safety regulations and standards P Do not install the machine in rooms where temperatures below freezing may occur P If there is any doubt concerning installation contact Miele s Technical Service Department SAVE THESE INSTRUCTIONS Installation Front view S NN 2 y z mms amp Power cord 6 External drainage options e g via Control panel sink drain or gully Door 4 Service panel for heat exchanger Four height adjustable feet Optional accessory extension hose 37 Installation Side view Rear view Lid
28. orrect measurement of before drying the laundry s residual If the problem persists dry items with moisture long zippers using the Warm air program The The load contained too Continue drying using the Warm air laundry is many dissimilar items size program not dry X and fabrics See the Program Guide for suitable enough programs 30 Frequently asked questions What if Possible fault Solution The heat exchanger unit service panel will not shut Water leaks form the machine after the heat exchanger unit has been cleaned The inner cover of the heat exchanger unit has not been locked properly and or the heat exchanger unit has not been positioned correctly Lint has collected at the bottom of the condenser unit housing Ensure that the heat exchanger unit is positioned correctly and lock the cover Check the rubber seals Use a cloth to remove any lint from the inside of the condenser unit housing Items made of synthetic fabrics have static cling after drying Synthetics are prone to static cling Use liquid fabric softener in the last rinse of the wash to minimize the static cling during drying Lint has built up Lint is the result of friction caused by items being worn and washed This lint is loosened during drying It has been established by research institutes that dryers have no detrimental effects on the lifetime
29. ows the main menu 46 Settings Language The displayed language can be set in the submenu Language P The flag behind the word Language P is a guide to find the settings menu in case a foreign language is selected m Select the desired language and confirm The change is only valid for the current program At the end of the program the display language will change back to the language set in the Settings Supervisor level The display will change back to the default language setting if no further entry is made within 15 seconds after setting a new language Anti crease The drum will continue to turn in intervals for one hour after the program has ended if the laundry is not immediately removed Default setting on Buzzer When the buzzer is selected a tone sounds at the end of the program off The end of program buzzer is turned off default setting However it does not turn off the warning tone which indicates a fault message normal The buzzer sounds normal at the end of a program loud The buzzer sounds loud at the end of a program Time of day The selection allows the clock to be shown as 24 hours 12 hours or not at all Afterwards the clock will be set to the current time of day If the option Time not displayed is selected the Timer will be displayed as a 24 hour clock m Select the desired clock display and confirm The display changes to the clo
30. ration can be extended or shortened with the jog shuttle maximum 2 hr cold air 1 hr warm air The program end time is displayed other programs The defined programs have a fixed drying level and duration and cannot be adjusted 20 Favorites Low temp To dry delicate items fabric care symbol KJ e g made from acrylic press the Low temp button The temperature is reduced and the program duration is extended m Press the Low temp button Saving a Favorite The basic menu shows all selected components Cottons Low temp Duration 1 47 h Low temp Timer T v v m Press the Save button Assigning a direct select button Cottons Marmal Low ternp Previous Cottons Morrmal Save to ZEE Back 47 m Select the desired number for the favorite with the jog shuttle and confirm The favorite is saved with the individual selections and shown in the main menu m To assign more favorites repeat the process with the remaining direct select buttons 21 Cleaning and Care Cleaning the lint filters Fluff from items being dried is collected by the fluff filters in the door and the door opening Clean the filters after each drying program Cleaning them while dry m Open the door and pull the lint filter 1 out as illustrated m Use your fingers or a vacuum cleaner to remove the fluff from the surface of the filter 22 m Remove any fluff from the hollow pa
31. ress the jog shuttle to select or adjust the component Select Low temp or Timer by pressing ET Press to get back to the Basic menu All components can also be selected and confirmed using only the jog shuttle Settings The Settings menu allows you to adjust the dryer to individual needs See Settings M for more information Before using for the first time The appliance must be correctly installed and connected before the first use Please see the Installation instructions Welcome screen The Welcome screen shows when the dryer is turned on for the first time Once the total use time of the dryer exceeds one hour the welcome screen will not show again The display then shows the language selection Language Select the desired language and confirm with OK Set the time of day m Set the hour by turning the jog shuttle press to confirm m Repeat to set the minutes and confirm m Press again to save the time of day Use Fabric care labels Before drying check fabric care labels for special drying instructions Drying with normal temperature Drying with low temperature K Do not dry in a tumble dryer Drying tips Observe the maximum loads see the Program guide Overloading the dryer will result in poor drying and wrinkling Do not place dripping wet items in the dryer Spin the laundry after the wash for at least 30 seconds Dry delic
32. rom latex shower caps waterproof textiles rubberized articles and items of clothing and pillows with foam rubber filling or similarly textured rubber like materials which contain padding or fillings e g pillows jackets If these were damaged the filling could get out with the risk of igniting in the dryer P In many programs the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them this also avoids the danger of the laundry self igniting The program is not finished until the cooling down phase is complete Always wait until the end of the program before removing the laundry P Warning Do not switch the tumble dryer off before the end of the drying program If this was done and the laundry was then removed immediately it could give off a great amount of heat P Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product IMPORTANT SAFETY INSTRUCTIONS B gt GROUNDING INSTRUCTIONS This appliance must be grounded In the event of a malfunction or breakdown grounding will reduce the risk of electric shock by providing a path of least resistance for electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be inserted into an appropriate outlet that is properly installed and grounded in
33. rt of the door opening You could also use a cleaning brush which is available as an optional extra from your Miele dealer or the Miele Spare Parts Department or use a vacuum cleaner m Once clean push the filter back into the door hold until it clicks into position Ensure it is facing the correct way m Also clean the door seal 2 with a damp cloth m Use your fingers or a vacuum cleaner to remove the fluff from the two lint filters in the door opening m Close the door N The fluff filters should be checked and cleaned regularly but always clean immediately the Clean out airways message appears Cleaning and Care Cleaning them with water If there is a great deal of compacted lint on any of the filters they can be removed and cleaned under hot running water m Open the door and pull the fluff filter out of the door as described previously The two filters in the door opening can also be removed if you need to clean them with water m Turn catch until you hear it click m Pull the filter by the dial out of the door opening as shown Do the same on the other side m Rinse all the filters under hot running water m Dry the filters thoroughly with care Replacing the filters Do not replace the filters if they are damp or wet Damp or wet filters could cause operational faults m Push the large filter back into the door holder until it clicks into position Ensure it is facing
34. rvisor level the option Settings will no longer be listed The supervisor level can no longer be opened Contact Technical Service to adjust more settings The basic menu of a program cannot be opened with the jog shuttle The components Gentle Timer Save and Program selection are deactivated The time of day is not shown The Settings and the Supervisor level can only be accessed by Technical Service Settings Supervisor level Language entry A selection can be set to show an additional welcome menu with language selection before the entry menu and at the end of the program national no additional welcome menu international The welcome menu shows A language must be selected All languages are available See Sort languages international 4 languages The welcome menu shows A language must be selected Four languages are available See Sort languages Timer The timer allows the user to select the time of the program end see Timer active or inactive without function are available When pressing the Timer button the inactive option default setting shows only the program duration the estimated time of day of the program end and the current time of day Drying levels The bars show the selected level Factory default medium level The program duration shortens more moist or lengthens more dry Drying level Cottons and Minim
35. shipping They have been designed to be biodegradable and recyclable To prevent suffocation ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of children 44 Disposal of an appliance Old appliances may contain materials that can be recycled Please contact your local recycling authority about the possibility of recycling these materials Ensure that a discarded dryer presents no danger to children While being stored for disposal remove the door to the drying compartment 7 LEE Menu Settings to adjust standard settings The dryer controls can be adjusted to changing demands through the settings Depending on default settings some settings are visible and can be changed by all users Menu Settings P or all setting are locked in the Supervisor level by a code Menu Settings Supervisor level Contact Miele Technical Service Settings P Opening the menu Settings Cottons Program selection Minimum iran Settings F Woollens handcare Smoothing 10 00 m Select Settings in the main menu and confirm by pressing the jog shuttle Selecting Settings Back Language P Anti crease Buzzer m Select the setting to be changed and confirm If no selection is made in the submenu the display will switch back to the Settings menu after 20 seconds Leaving the Settings menu m Select Back and confirm The display sh
36. t through again until it has all gone m Shake any excess water out of the unit until no more water droplets are visible m Remove any soiling still visible inside the housing unit by hand using and damp cloth Do not try and access areas you cannot reach by hand m Also make sure the rubber seals are clean The rubber seals must not be removed and must be free of kinks Replacing the heat exchanger unit m With the handle facing upwards push the heat exchanger unit back into position in its housing m Turn the lever down to the horizontal position making sure that the hook on the lever clicks into the groove 27 Frequently asked questions Repairs to electrical appliances must only be carried out by a qualified and trained technician in accordance with local and national safety regulations Unauthorized repairs could cause injury or machine damage Check and fault messages in the display What if Possible cause Solution Adjust the laad This is not a fault The electronic reads that no laundry is in the drum and cancels the program Single items or already dried laundry can also cause a program stop Single items should be dried with a Timed drying program To delete the message Open the door A Technical fault A numerical fault message shows e g F47 The fault cannot be detected immediately In some cases Clean out airways is displayed
37. tle Jog shuttle Turn the jog shuttle to select a program or setting Press the jog shuttle to confirm the selection Direct select buttons The first four programs shown in the display on the left are the Favorites They can be selected with the direct select buttons The Favorites can be individually set to your desire See Favorites for more information The direct select buttons have different functions in the other menus In these menus an arrow is displayed above the respective button with the function description of the button Program selection possibility Possibility 1 Select and confirm the menu Program selection in the display with the jog shuttle Possibility 2 Press one of the direct select buttons and access directly the basic menu of the program Guide to the dryer Menu Program selection Program Back 4 selection Minimum iran Woollens handcare m All pre set programs can be selected with the jog shuttle Depending on the direction the jog shuttle is turned the highlighter moves up or down The arrows VA at the right side of the display show that more selections are available m Press the jog shuttle to open the basic menu of the selected program Basic menu of a drying program Cottons Marrnal Duration 1 16 h Low temp Timer di Back v v v m The Drying level or Program can be selected by turning the jog shuttle The selected component is highlighted P
38. um iron The drying level of Cottons or Minimum iron can be adjusted Drying level Cottons and Machine iron This drying level can be adjusted 51 Settings Supervisor level Cleaning the airways The lint filters must be cleaned after every drying cycle Additionally the indicator Clean out airways lights once a certain level of lint is collected The user can decide at which level of lint collection the indicator should come on off Clean out airways does not light up heavy Clean out airways shows only when large amount of lint is collected normal Factory default light Clean out airways shows even when a small amount of lint is collected 52 Cleaning the heat exchanger Check the heat exchanger unit form time to time and clean it if necessary A Maintenance message will remind you You can decide after how many hours you want the message to appear Setting the correct option will depend on how much link and dust has accumulated Select a more appropriate option if you find that the heat exchanger is very dirty or not very dirty at the end of the set time The machine is delivered with this option set to 400 hours Display the residual moisture as a percentage In addition to the drying levels the residual moisture as a 6 can be displayed in the program cycle Factory default without percent indication Cool air free If the dryer is used with a coin mechanism the pr
Download Pdf Manuals
Related Search