Home
Miele DA 7000 D Aura Operating and Installation Instructions
Contents
1. Operating and Installation Instructions Ventilation System To prevent accidents and machine damage read these instructions before installation or use en US M Nr 09 973 040 Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the ventilation system 8 Description of function 10 Operation ss seguros teu de ROS ROC RUE ORO UR OR e Rt 11 Tumming TRE A 0 0 TEE 11 Selecting the fan power 11 Delayed shut down 5 15 12 Turning the fanof oi is added ERE 12 Overhead lighting 0 12 Operating hours timer 13 Sensor button tone 2 0 15 Automatic safety shut off isses ses 15 Cleaning and 16 Grease fiers sarrioa errad ari SEARE EEK TORTOR 17 Resetting the grease 18 Installing and replacing the OdorFree charcoal filters 19 Resetting the charcoal filter timer 20 Changing ligit DUDS sets iba bee RES Re PER eh det 21 After Sales Service
2. 22 Installation instructions 23 Caring for the 24 Appliance 5 5 25 Structural 64 eee 27 Installation e p RR II 28 Installation accessories iii 28 metalation INSTRUCTIONS s au canoe e da pak pe a ett tet E 28 Electrical 29 Technical 30 IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS Keep these instructions in a safe place and pass them on to any future user Read these instructions carefully before installing or using the Ventilation System P This appliance is intended for residential use only Use the appliance only for its intended purpose P This appliance complies with current safety requirements Improper use of the appliance can lead to personal injury and material damage NCAUTION For General Ventilating Use Only Do Not Use To Exhaust Hazardous Or Explosive Materials And Vapors P This appliance is designed to vent cooking smoke and odors only P This appliance is suitable for installation above gas or electric cooking surfaces P This appliance is not intended for outdoor use
3. INFORMATION IS SUBJECT TO CHANGE PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS TECHNICAL amp WARRANTY INFORMATION DA 7000 D en US M Nr 09 973 040 02
4. P This appliance must not be used in a non stationary location e g on a ship NWARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWING P a Use this appliance only in the manner intended by the manufacturer If you have questions contact Miele P b Before servicing or cleaning the appliance switch power off at the ser vice panel and lock the service disconnecting means to prevent power from being switched on accidentally If the service disconnecting means cannot be locked securely fasten a prominent warning device such as a tag to the service panel P c Be certain your appliance is properly installed and grounded by a qualified technician To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding system It is imperative that this basic safety requirement be met If there is any doubt have the electrical system of the house checked by a qualified electrician IMPORTANT SAFETY INSTRUCTIONS P d Before connecting the appliance to the power supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply This data must correspond to prevent appliance damage If in doubt consult a qualified electrician P e Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes
5. Installation accessories R 6 8 50 4 screws 5 60 mm and 4 anchors 8 x 50 for securing the ventilation hood to the ceiling A The screws and anchors are suitable for mounting on concrete ceilings For other types of ceiling materials use appropriate materials Ensure that the ceiling can support the load 4 mounting sets for hanging the ventilation hood on the ceiling consisting of 4 cables 4 ceiling fasteners und 4 caps The suspension must not be used for additional components e g a shelf Es 3 cord fasteners for fastening the power cable to a suspension cord 28 5x60 D bel8x50 dai2775 08277310 dai2791 1 strain relief for affixing the power cable to a ceiling fastener dai2796 Drill template A cardboard insert serves as a drill template Installation instructions The individual installation steps are described on the installation sheet provided Before installation read the information on the following pages as well as Appliance dimensions and Important safety instructions N CAUTION To avoid risk of hand or other injury avoid contact with sharp edges during the assembly and installation process N CAUTION When cutting or drilling into the wall or ceiling do not damage electrical wiring and other hidden utilities Electrical connection NWARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWIN
6. 000 BTU 12 6 KW 26 660 mm 30 760 mm and no burner 15 000 BTU 4 5 KW Single burner Wok 20 500 BTU 6 KW 26 660 mm 30 760 mm All other gas cooktops 30 760 mm f several gas surfaces are installed under the hood the total output must be taken into account when determining the minimum safety clearance Be sure to follow the the gas cooktop manufacturer s minimum safety clearances from easily flammable materials e g upper cabinets If local building codes require a greater safety clearance follow their specifications f there is more than one appliance beneath the hood and they have different minimum safety clearances always select the greater clearance See Important Safety Instructions for further information 26 Structural support The mounting cables will support NCAUTION the weight of the hood The When cutting or drilling into the wall mounting cables must be attached or ceiling do not damage electrical to rigid structural framing that is wiring or other hidden utilities supported in its entirety by the ceiling joists or to the ceiling joists directly Do not attach the cables directly to the ceiling with anchors toggle bolts etc Existing Ceiling joists xisting Ceiling j i Ceiling Mounting cables dai3470 Spacers C 27 Installation
7. Off sensor button D to turn the fan off m Press the delayed shut down sensor button g amp and the charcoal filter sensor button simultaneously The charcoal filter sensor and one of the power level sensors 1 to 4 flash The sensors 1 to 4 show the time set Sensor 1 120 hours Sensor 2 180 hours Sensor 3 240 hours Sensor 4 deactivated m o select a shorter time press the 1 sensor button to select a longer time press the 4 sensor button until the desired time has been set Operation m Confirm the setting by pressing the charcoal filter sensor button All the sensors go out If the procedure is not confirmed within 4 minutes of programming the hood will automatically default to the previous setting Checking the charcoal filter timer To check the percentage of time already used m Press the On Off sensor button D to turn the fan on m Press and hold down the charcoal fil ter button 6 One or more of the sensors 1 to 4 will flash The number of flashing sensors indicates the percentage of operating time already been used Sensor 1 2596 Sensors 1and 2 5096 Sensors1to3 75 Sensors 1104 100 The number of operating hours used remains stored when the ventilation system is turned off or if there is a power failure Sensor button tone Whenever you press a sensor button you will hear a brief tone for confirmation You can deactivate this audible tone m
8. abrasive cleaning agents or limescale removers They could destroy the filter In a dishwasher place the filter vertically in the lower basket making sure that the spray arm is not blocked Use a wash program with a max temperature of 150 F 65 C Ina Miele dishwasher use the Normal program Use the recommended amount of dishwasher detergent Overuse could destroy the filter Depending on the detergent cleaning the grease filters in a dishwasher may cause permanent discoloration of the filter surface Performance of the filter is not affected by this discoloration m After cleaning the filters can be placed on a towel to air dry 17 Cleaning and care m While the filters are removed clean any dirt or grease from the filter casing This reduces the risk of fire m Replace the grease filters Resetting the grease filter timer After cleaning the grease filter timer needs to be reset m With the fan running press the grease filter sensor button for about 3 seconds until only the 1 sensor flashes The grease filter button amp goes out If you clean the grease filters before the operating time elapses m Press the grease filter sensor button for about 6 seconds until only the 1 sensor flashes 18 Cleaning and care Installing and replacing the OdorFree charcoal filters Two charcoal filters are installed in addition to the grease filters They are designed to absorb and neutr
9. and standards Repairs and other work by unqualified persons could be dangerous P f Only open the casing as described in the enclosed Installation diagram and in the Cleaning and care section of this manual Under no circumstances should any other parts of the casing be opened Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults P g Before discarding an old appliance disconnect it from the power supply and remove the power cord to prevent hazards Use NWARNING TO REDUCE THE RISK OF A COOKTOP GREASE FIRE P a Never leave surface units unattended at high settings Boilovers cause smoking and greasy spillovers may ignite Heat oils slowly on low or medium settings P b Always turn the hood on when cooking at a high heat P c Clean the ventilation hood frequently Grease should not be allowed to accumulate on the fan or fil ter P d Use the proper pan size Always use cookware appropriate for the size of the cooking area P e Do not flamb or grill with an open flame beneath the hood Flames could be drawn up into the hood by the suction and the grease filters may catch fire IMPORTANT SAFETY INSTRUCTIONS NWARNING TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE OBSERVE THE FOLLOWING P a SMOTHER FLAMES with a close fitting lid cookie sheet or metal tray
10. power level 2 The On Off button D and the 2 button light up Selecting the fan power level Depending on the intensity of the cooking vapors levels 1 through 3 are usually sufficient for normal cooking m Use the buttons 1 2 or 3 to select the desired power level Intensive setting m To remove intensive vapors or odors for example when frying or cooking for with a strong aroma select intensive power level 4 Automatically switching back from the intensive setting The intensive level can be programmed to automatically switch back to level 3 after 10 minutes m Turn the fan and the overhead lighting off m Press and hold the delayed shut down button amp for approx 10 seconds the 1 sensor button lights up m Press the following buttons one after another the overhead lighting sensor button the 1 sensor button and the overhead lighting sensor button X again If the sensor buttons 1 and 4 flash automatic switch back is not activated m Press the 4 button to activate automatic switch back The sensor buttons 1 and 4 will light continuously Press the 1 sensor button to deactivate m Confirm your selection by pressing the delayed shut down sensor amp If the setting is not saved within 4 minutes the old setting is retained If the procedure is not confirmed within 4 minutes of programming the hood will automatically default to the previous setting Operation Delayed shu
11. CK OR INJURY TO PERSONS OBSERVE THE FOLLOWING Disconnect the exhaust hood from the power supply by either removing the fuse unplugging it or manually tripping the circuit breaker When in use halogen bulbs become extremely hot and can burn your hands Do not attempt to change the bulbs until they have had sufficient time to cool Do not press the bulb surface Fingerprints or body oils deposited on the bulb will decrease its life Follow the bulb manufacturer s instructions dai2328 dai2329 m change the halogen bulb first gently press the light cover The cover will open and can now be flipped down m Pull the halogen bulb from its socket m Using a cloth or glove insert the new halogen bulb type 12 V 20 W G4 Please follow the manufacturer s instructions m Flip the light cover back up making sure it clicks into place 21 After Sales Service Repairs In the event of a fault which you cannot easily fix yourself please contact the Miele Technical Service Department m When contacting the Technical Ser vice Department please quote the model and serial number of your appliance These are shown on the data plate 22 MieleCare USA only MieleCare our Extended Service Contract program gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership MieleCare is the only Extended Service Contract in
12. G All electrical work should be performed by a qualified electrician in strict accordance with national regulations for USA ANSI NFPA 70 and local safety regulations Installation repairs and other work by unqualified persons could be dangerous Ensure that power to the appliance is OFF while installation or repair work is performed Verify that the voltage load and circuit rating information found on the data plate located behind the grease filter match the household electrical supply before installing the hood m Use only with ventilation hood cord connection kits that have been investigated and found acceptable for use with this model hood If there is any question concerning the electrical connection of this appliance to your power supply please consult a licensed electrician or contact Miele s Technical Service Department See back cover for contact information NWARNING THIS APPLIANCE MUST BE GROUNDED Grounding Instructions This appliance must be grounded in the event of an electrical short circuit grounding reduces the risk of electric shock by providing a path of least resistance WARNING Improper grounding can result in a risk of electric shock If there is any doubt have the electrical system of the house checked by a qualified electrician Do not use an extension cord If the power cord is too short have a qualified electrician install an outlet near the appliance Important Th
13. Press the On Off sensor button D to turn the fan off m Press the 4 sensor button and the grease filter sensor button 6 simultaneously for 5 seconds until you hear a tone The audible tone is now deactivated for all functions m To reactivate the tone repeat the process If the ventilation system has been disconnected from the power supply or after a power failure the audible tone is automatically reactivated regardless of the previous setting Automatic safety shut off If the fan is left running and no button is pressed for 10 hours the fan will turn off automatically The overhead lighting remains on m Press the On Off sensor button D to turn the fan back on again Cleaning and care NWARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWING Before cleaning or servicing the hood disconnect it from the power supply see Important Safety Instructions N The halogen bulbs are very hot when in use They stay hot for some time after turned off Use caution danger of burns Wet cleaning the hot bulbs will cause damage Wait a few minutes after turning them off before cleaning Cleaning the casing Never use abrasive cleaners scouring pads steel wool or caustic Oven cleaners on the hood They will damage the surface m All external surfaces and controls can be cleaned with a mild solution of warm water and liquid dish soap applied with a soft spo
14. alize cooking odors The charcoal filters are installed in the ventilation hood below the recirculating vents m install or replace the charcoal filters the grease filters must first be removed as described in the previous section of this manual The charcoal filter holders are in the left and right hand underside of the hood dai2769 m Open the lock and flip the charcoal filter holder downwards dai2774us m Place the charcoal filter in the holder m Close the holder Before first use m Activate the operating hours timer see Operation Cleaning and care Replace the charcoal filters when the charcoal filter sensor lights up Or when the filter no longer absorbs odors efficiently However they should be changed at least every 2 years Dispose of the charcoal filter with the household waste Resetting the charcoal filter timer After replacing the filters reset the charcoal filter operating hours timer m With the fan running press the charcoal filter sensor button for about 3 seconds until only the 1 sensor flashes The charcoal filter sensor amp goes out If you change the charcoal filters before the operating time elapses m Press the charcoal filter sensor button 8 for about 6 seconds until only the 1 sensor flashes 20 Cleaning and care Changing the light bulbs NWARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHO
15. any plastic wrappings bags etc are disposed of safely and kept out of the reach of babies and young children Danger of suffocation 24 Disposal of an old appliance Old appliances may contain materials that can be recycled Please contact your local recycling center about the possibility of recycling these materials Before discarding an old appliance disconnect it from the electrical supply and cut off the power cord to prevent it from becoming a hazard Appliance dimensions S i SN SS PSI dai3292 1 Power cord 5 9 ft 1 8 m long Keep the recirculating vents in mind during installation If it is positioned to high the extraction will be inefficient There should be a sufficient gap from the hood to the ceiling to allow air to flow freely from the vents The distance should be at least 1 ft 300 mm 25 Appliance dimensions Distance between cooktop and hood S Do not install this exhaust hood over cooktops that burn solid fuel Provided a greater clearance is not specified by the manufacturer of the cooktop observe the following minimum safety clearances between a cooktop and the bottom of the hood Miele Cooktops Non Miele Cooktops Electric cooktops 24 610 mm Electric barbecues and fryers 26 660 mm Multiburner gas cooktops 43
16. e burners and the cookware P Do not use the hood without the grease filters in place P Do not use a steam cleaner to clean the hood Steam could penetrate electrical components and cause a short circuit IMPORTANT SAFETY INSTRUCTIONS Installation NWARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWING a Installation work and electrical wiring must be done by qualified person s in accordance with all applicable codes and standards including fire rated construction P b Sufficient air is needed for combustion and exhausting of gases through the flue chimney of fuel burning equipment to prevent back drafting Follow the heating equipment manufacturer s guideline and safety standards such as those published by the National Fire Protection Association NFPA and the American Society for Heating Refrigeration and Air Conditioning Engineers ASHRAE and the local code authorities P c When cutting or drilling into the wall or ceiling do not damage electrical wiring and other hidden utilities P d Ducted hoods must always be vented to the outdoors P e Do not use this hood with any solid state speed control device P f Do not use an extension cord to connect the appliance to electricity Extension cords do not guarantee the required safety of the appliance e g danger of overheating g Do not install this hood over cooktops that bu
17. e hood comes equipped with a 5 9 ft 1 8 m power cord The hood must be hard wired accordingly Black Red wire connect to L1 live White wire connect to N neutral Green wire connect to GND ground 29 Technical Data Total connected load 160W Fanmotor 100 W Overhead lighting 3 x 20 W Voltage 120 V AC Freguerney x voee ee Rs 60 Hz FUSE HANG awake ee 10A Power cord length 5 9 ft 1 8 m Weight 70 5 Ibs 32 kg Optional accessory Miele OdorFree charcoal filter set DKF 26 1 The set has two charcoal filters 30 Please have the model and serial number of your appliance available before contacting Technical Service U S A Miele Inc National Headquarters 9 Independence Way Princeton NJ 08540 Phone 800 843 7231 609 419 9898 Fax 609 419 4298 www mieleusa com Technical Service amp Support Nationwide Phone 800 999 1360 Fax 888 586 8056 TechnicalService mieleusa com Germany Miele amp Cie KG Carl Miele StraBe 29 33332 G tersloh Canada Miele Limited Headquarters and Showroom 161 Four Valley Drive Vaughan ON 14 4V8 Phone 800 643 5381 905 660 9936 Fax 905 532 2290 www miele ca professionalQmiele ca commercial enquiries MieleCare National Service Phone 800 565 6435 905 532 2272 Fax 905 532 2292 customercareQmiele ca general and technical enquries
18. imer records how many hours the hood has been in operation The timer signals when the grease filters or the charcoal filters need to be cleaned or replaced Grease filter timer After 30 hours of operation or the preselected operating time the grease filter sensor button amp will light up This means it is time to clean the grease filters After cleaning the timer needs to be reset see Cleaning and Reprogramming the grease filter timer The grease filter timer is preset to 30 hours This time can be lengthened or shortened to 20 30 40 or 50 hours depending on your cooking habits Atime of 20 hours should be programmed in kitchens with frequent frying A time of 20 hours should also be programmed if the kitchen is only used occasionally This will help to prevent grease which has accumulated over a long period of time from hardening on the filters making cleaning more difficult f you typically use very little fat for cooking an interval of 40 or 50 hours can be selected To change the operating time m Press the On Off sensor button D to turn the fan off m Press the delayed shut down sensor button amp and the grease filter sensor button amp simultaneously The grease filter sensor amp and one of the 1 to 4 sensors will flash The sensors 1 to 4 show the time set Sensor 1 20 hours Sensor 2 30 hours Sensor 3 40 hours Sensor 4 50 hours m o select a shor
19. nge m Wipe dry using a soft cloth Do not use too much water when cleaning the controls Water could penetrate the electronics and cause damage 16 Avoid cleaning agents containing soda acids bleach or chlorides abrasive cleaning agents e g powder or cream cleansers abrasive sponges i e pot scourers or sponges which have been previously used with abrasive cleaning agents These will damage the surface Glass surfaces Glass surfaces can be cleaned using a glass cleaner Cleaning and care Grease filters Cleaning the grease filters The grease filters should be cleaned By hand use a scrub brush with a every 3 4 weeks to avoid the accumulation grease Clean the grease filters at the latest when the grease filter sensor lights up dirty filter is a fire hazard WWD DN LK 2 2 2 27 YY 7 2 Y x YY ONA 2 V o 0 0 Oh M Ni 4 NN 1 V Up h x n i X i N N i dai2773 l M m remove a grease filter pull the locking clips forward lower the filter down 45 unhook it at the rear and take it out Support the grease filter so that is does not fall and damage the cooktop solution of warm water and mild dish soap Do not use the pure detergent aggressive all purpose cleaners oven sprays
20. on to turn the lighting On Off and also adjust the brightness Fan On Off 03 Fan power selection 42 Delayed shut down Use this button to activate the delayed shut down feature When activated the fan turns off automatically after either 5 or 15 minutes as selected 3 Grease filter This button will light up when the grease filters need to be cleaned Press this button after cleaning the grease filters to reset the operating hours timer see Cleaning and care You can also check the operating hours and change the timer setting OdorFree charcoal filter button The button lights up when the charcoal filters need to be changed To do this the operating hours timer needs to be activated after installation of the ventilation system Use this button to reset the operating hours timer after changing the charcoal filters see Cleaning and care You can also check the operating hours and change the timer setting Description of function The ventilation system works with air recirculation The air drawn in is cleaned by the grease filters and then by 2 OdorFree charcoal filters The cleaned air is then recirculated back into the kitchen through vents at the top of the hood Before using the ventilation system for the first time make sure that the charcoal filters are in place see Cleaning and care 10 Operation Turning the fan on D m Press the On Off sensor button D The fan turns on at
21. rn solid fuel gt h Provided a larger distance is not given by the manufacturer of the cooktop follow the minimum safety distances between a cooktop and the bottom of the hood given in the Appliance dimensions section of this manual If local building codes require a greater safety distance follow their requirement If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance P i Never connect an exhaust hood to an active chimney dryer vent vent flue or room ventilating ductwork P j Seek professional advice before connecting an exhaust hood vent to an existing inactive chimney or vent flue Any fittings sealant or materials used to install the ductwork must be made of approved non flammable materials NWARNING TO REDUCE THE RISK OF FIRE USE ONLY METAL DUCTWORK Guide to the ventilation system AR 9 5 d 15 dai2767us Guide to the ventilation system Suspension cables 2 Canopy 8 OdorFree charcoal filter holders 9 Grease filters 8 Control panel The symbols serve as sensor buttons You select the functions by pressing these buttons You will hear a brief beep as confirmation Overhead lighting OdorFree charcoal filters 2 Recirculating vents recirculation mode only Sensor buttons Overhead lighting Use this butt
22. t down 53415 It is best to let the fan run for a few minutes after cooking is completed to neutralize any odors in the air The delayed shut down feature can be selected to turn the fan off automatically after 5 or 15 minutes m After cooking press the delayed shut down button db while the fan is still running Press once the fan automatically switches off after 5 minutes 5 amp will light up Press twice the fan automatically switches off after 15 minutes dl 15 will light up m f you press the delayed shut down button 25 again the fan will not turn off automatically 562415 goes out Turning the fan off D m Press the On Off sensor button D to turn the fan off 12 Overhead lighting The overhead lighting and the fan can be turned on and off separately Turning the overhead lighting on m Press the light sensor button 5 briefly The light comes on at maximum brightness Dimming the overhead lighting The brightness of the lighting can be adjusted m When the light is on press the light button XX The light will dim until you release the button m f the X button is pressed and held down again the light will brighten until the button is released If the XX button is pressed continuously the light cycles between light and dark Turning the overhead lighting off m Briefly press the light sensor button X to turn the light off Operation Operating hours timer 6 A t
23. ter time press sensor button 1 to select a longer time press sensor button 4 Hold the button until the desired time is set m Confirm your selection by pressing the grease filter sensor button db the sensors go out If the procedure is not confirmed within 4 minutes of programming the hood will automatically default to the previous setting Checking the grease filter timer To check the percentage of time already used m Press the On Off sensor button D to turn the fan on m Press and hold the grease filter sensor button Operation One or more of sensors 1 to 4 will flash The number of flashing sensors indicates the percentage of operating time that has already been used Sensor 1 2596 Sensors 1and2 50 Sensors1to3 75 Sensors1to4 100 m When you release the grease filter sensor button the current fan setting is displayed The number of operating hours remains stored when the ventilation system is turned off or if there is a power failure 14 OdorFree charcoal filter timer By factory default the charcoal filter timer is deactivated Set the timer to suit your cooking habits The charcoal filter sensor button 69 will light up after the hood has operated for the number of hours set m The charcoal filters must be replaced with new filters After cleaning the timer will need to be reset see Cleaning and care Setting the charcoal filter timer m Press the On
24. the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts Only genuine Miele parts installed by factory trained professionals can guarantee the safety reliability and longevity of your Miele appliance Please note that unless expressly approved in writing by Miele s Service department Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele Our goal is to prevent unauthorized and untrained service personnel from working on your Miele products possibly doing further damage to them you and or your home To learn more about MieleCare Extended Service Contracts please contact your appliance dealer or visit us online at hitp mieleusa com mielecare Installation Instructions Read these instructions and the Important Safety Instructions before installing this ventilation system The installation steps are described in the enclosed Installation Diagram Leave these instructions with the appliance for the consumer user Information is subject to change Please refer to our website to obtain the most current product specification technical amp warranty information Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping They have been designed to be biodegradable and recyclable Please recycle NDANGER Ensure that
25. then turn off the burner BE CAREFUL TO PREVENT BURNS If the flames do not go out immediately EVACUATE AND CALL THE FIRE DEPARTMENT P b NEVER PICK UP A FLAMING PAN You may be burned P c DO NOT USE WATER including wet dishcloths or towels a violent steam explosion will result P d Use a fire extinguisher ONLY if 1 You have a class ABC extinguisher and you know how to operate it 2 The fire is small and contained in the area where it started 3 The fire department is being called 4 You can fight the fire with your back to an exit Based on Kitchen Firesafety Tips published by NAFTA P This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety P Children should be supervised to ensure that they do not play with the appliance NCAUTION Accessible parts may become hot when used with cooking appliances P Always turn on the hood when using the cooktop to prevent damage from condensation P Never operate gas burners without cookware Turn the burner off when not in use Adjust the burner so that the flames do not extend beneath the cookware Do not overheat the cookware e g when using a wok The hood can be damaged due to excessive heat from th
Download Pdf Manuals
Related Search
Related Contents
manual mig 品番 BB-SC384B/BB-SC382 - psn User m anual - メトラー・トレド - Mettler DÉGRAISSANTS 87-643-manual-climatizadores Manuale - R.Sat Elettronica Copyright © All rights reserved.
Failed to retrieve file