MicroBoards Technology Premium Pro Series User's Manual
Contents
1. 1E 00 RECOVERED ID WITH ECC CORRECTION 20 00 INVALID COMMAND OPERATION CODE 21 00 LOGICAL BLOCK ADDRESS OUT OF RANGE 24 00 INVALID FIELD IN CDB 25 00 LOGICAL UNIT SUPPORTED 26 00 INVALID FIELD IN PARAMETER LIST 26 01 PARAMETER NOT SUPPORTED 26 02 PARAMETER VALUE INVALID 26 03 THRESHOLD PARAMETERS NOT SUPPORTED 26 04 INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION 28 00 NOT READY TO READY CHANGE MEDIUM MAY HAVE CHANGED 29 00 POWER ON RESET OR BUS DEVICE RESET OCCURRED 29 01 POWER ON OCCURRED 29 02 SCSI BUS RESET OCCURRED 29 03 BUS DEVICE RESET FUNCTION OCCURRED 29 04 DEVICE INTERNAL RESET 2A 00 PARAMETERS CHANGED 2A 01 MODE PARAMETERS CHANGED 2A 02 LOG PARAMETERS CHANGED 2A 03 RESERVATIONS PREEMPTED 2B 00 COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT 2C 00 COMMAND SEQUENCE ERROR 2C 05 PERSISTENT PREVENT CONFLICT 2F 00 COMMANDS CLEARED BY ANOTHER INITIATOR 30 00 INCOMPATIBLE MEDIUM INSTALLED 30 01 CANNOT READ MEDIUM UNKNOWN FORMAT 30 02 CANNOT READ MEDIUM INCOMPATIBLE FORMAT 30 03 CLEASNING CARTRIDGE INSTALLED 35 00 ENCLOSURE SERVICES FAILURE 35 01 UNSUPPORTED ENCLOSURE FUNCTION 35 02 ENCLOSURE SERVICES UNAVAILABLE 35 03 ENCLOSURE SERVICES TRANSFER FAILURE 35 04 ENCLOSURE SERVICES TRANSFER REFUSED 39 00 SAVING PARAMETERS NOT SUPPORTED 3A 00 MEDIUM NOT PRESENT 3A 01 MEDIUM NOT PRESENT TRAY CLOSED 3A 02 MEDIUM NOT PRESENT TRAY OPEN 3B 0 END MEDIUM REACHED 3B 11 MEDIUM MAGAZINE2. HDDX CD DA gt HHDX 15 26 COPY START INSERT COPY 15 26 HDDtoDISC HDDtoDISC HDDXtoDISC gt TARGET DISC CD DA MIT 20 d NOr gt MASTERCLEAR YES gt gt HDD1 CLEAR YES gt HDDtoDISC NO Y NG HDDX CLEAR YES gt HDDX M HDDtoDISC Y No gt gt EXIT gt EXIT NO Y Y A SIMULATION YES INSERT INSERT ANALYZING MASTE SIMULATION 15 26 lt DISCtoDISC gt MASTER DISC gt m gt 9 Esc to TARGET DISC CD DA BITTT 20 Y No v DISC ERASE YES QUICK ERASE YES SURE YES DISC ERASE ES REWRITABLE Please wait Y Nov QUICK ERASE YES SURE YES pisc ERASE Please wait NO Y gt NO Y YES DISCtoHDD1 lt Trk EXTRACTION EXTRACTION ES NO Y SETUP YES MODE CHANGE gt SETUP MENU see pg 12 5 INSERT ANALYZING MASTER EXTRACT THE Trk MASTER DISC TRK 01 12 YES execute the selected track Y YES NO Y NO Y A skip track EXTRACT THE Trk TRK 12 12 Y YES NO END EXTRACTION NO Y Y ves Nd COPY TO HDD YES REGIST 15 26 NEXT MASTER YES CD DA BLTTT120 COPY START HDD1toDISC COPY MENU DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Copy Disc to Disc 1 2 3 4 5 6 Place the Master Disc into the Reader drive Place the blank disc s into the Recorder drive s and wait 10 second
3. VALUE INVALID 26 03 THRESHOLD PARAMETERS NOT SUPPORTED 26 04 INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION 27 00 WRITE PROTECTED 27 01 HARDWARE WRITE PROTECTED 27 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED 27 03 ASSOCIATED WRITE PROTECT 27 04 PERSISTENT WRITE PROTECT 27 05 PERSISTENT WRITE PROTECT 27 06 CONDITIONAL WRITE PROTECT 28 00 NOT READY TO READY CHANGE MEDIUM MAY HAVE CHANGED 19 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC 29 00 POWER ON RESET OR BUS DEVICE RESET OCCURRED 29 01 POWER OCCURRED 29 02 SCSI BUS RESET OCCURRED 29 03 BUS DEVICE RESET FUNCTION OCCURRED 29 04 DEVICE INTERNAL RESET 2A 00 PARAMETERS CHANGED 2A 01 MODE PARAMETERS CHANGED 2A 02 LOG PARAMETERS CHANGED 2A 03 RESERVATIONS PREEMPTED 2B 00 COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT 2C 00 COMMAND SEQUENCE ERROR 28 00 NOT READY TO READY CHANGE MEDIUM MAY HAVE CHANGED 29 00 POWER ON RESET OR BUS DEVICE RESET OCCURRED 2A 00 PARAMETERS CHANGED 2A 01 MODE PARAMETERS CHANGED 2 00 COMMAND SEQUENCE ERROR 2C 03 CURRENT PROGRAM AREA IS NOT EMPTY 2C 04 CURRENT PROGRAM AREA IS EMPTY 2C 05 PERSISTENT PREVENT CONFLICT 2E 00 INSUFFICIENT TIME FOR OPERATION 2F 00 COMMANDS CLEARED BY ANOTHER INITIATOR 30 00 INCOMPATIBLE MEDIUM
4. blank discs Auto Run Default setting is OFF When set to ON this allows the duplicator to start the duplication process when all recorders are loaded with blank media If you are copying Disc to Disc the master must be loaded before duplication will begin Copy Quantity gt gt QUANTITY Set up the number of disc you want to copy 0750 Use the Y A buttons to change the number in the current column up or down YES will move you one column to the right NO will move you 1 column to the left Press YES when in the right column to save the number of copies entered The example above shows that 750 copies have been entered with the cursor currently in the right column underlined Session Mode CD only Invalid for DVD Select either from AUTO CLOSE or OPEN AUTO Make the session of copied disc as same as the master CLOSE Close the session of copied disc OPEN Leave the session of copied disc open Reader Select Changes which drive is selected as the reader This setting should not be changed HDD Setup Access to the Hard Drive maintenance functions Auto Generate This option will create Hard Drive partition names for you automatically if ON is selected When OFF is selected the user will need to name each partition added Edit Name This option will allow you to modify partition image names See pages 8 9 Master Clear This option will allow you to remove specific hard drive partition images HDD Format This option will completely
5. press the NO or Y button until the display reads Trk EXTRACTION CDtoHDD Press the YES button 2 Press YES again in the following screen EXTRACTION OK 3 You will see this screen after the contents of the master have been analyzed NAME 79 28 _ If you do not have the Auto Generate in the Setup menu feature turned on use the Aor Y buttons to change the character in the position shown by the cursor Press the YES button to move the cursor to the right or NO to move back to the left Once the cursor is the 14th character press YES to begin registering the master Insert a master audio disc into the reader drive CWT Pro Series will analyze the master disc 4 Next it displays Selected Track Number Total Track Number This master data has total 12 tracks EXTRACT THE Trk TRK 01 12 Press NO or V to skip forward a track Press YES to select the track you want to extract DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC 5 If you skip forward all tracks it asks if you want to end extraction for the master data END EXTRACTION Press YES to finish extraction and register selected tracks in HDD Press NO or Y to add more tracks from this master data 6 If you press YES in step 5 the CWT Pro Series asks you to register the extracted tracks COPY TO HDD OK x 5 9 Press YES to start registration 7 After registration completes the CWT Pro Series asks you if you want to extract more tracks from
6. NOT ACCESSIBLE 3B 12 MEDIUM MAGAZINE REMOVED 3B 13 MEDIUM MAGAZINE INSERTED 3B 14 MEDIUM MAGAZINE LOCKED 3B 15 MEDIUM MAGAZINE UNLOCKED 3B 16 MECHANICAL POSITIONING OR CHANGER ERROR 3D 00 INVALID BITS IN IDENTIFY MESSAGE 3E 00 LOGICAL UNIT HAS NOT SELF CONFIGURED YET 3E 01 LOGICAL UNIT FAILURE 3E 02 TIMEOUT ON LOGICAL UNIT 3F 00 TARGET OPERATING CONDITIONS HAVE CHANGED 3F 01 MICROCODE HAS BEEN CHANGED 3F 02 CHANGED OPERATING DEFINITION 3F 03 INQUIRY DATA HAS CHANGED 40 NN DIAGNOSTIC FAILURE ON COMPONENT NN 80H FFH 43 00 MESSAGE ERROR 44 00 INTERNAL TARGET FAILURE 45 00 SELECT OR RESELECT FAILURE 46 00 UNSUCCESSFUL SOFT RESET 47 00 SCSI PARITY ERROR 48 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED 49 00 INVALID MESSAGE ERROR 4A 00 COMMAND PHASE ERROR 4B 00 DATA PHASE ERROR 17 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC LOGICAL UNIT FAILED SELF CONFIGURATION TAGGED OVERLAPPED COMMANDS NN QUEUE OVAERLAPPED COMMANDS ATTEMPTED 53 00 MEDIA LOAD OR EJECTED FAILED 53 02 MEDIUM REMOVAL PREVENTED 55 00 SYSTEM RESOURCE FAILURE 57 00 UNABLE TO RECOVER TABLE OF CONTENTS 5A 00 OPERATOR REQUEST OR STATE CHANGE INPUT 5A 01 OPERATOR MEDIUM REMOVAL REQUEST 5B 00 LOG EXCEPTION 5B 01 THRESHOLD CONDITION MET 5B 02 LOG COUNTER AT MAXIMUM 5B 03 LOG L
7. property Microboards Technology products are in no way intended to encourage or condone such duplication DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Installation Requirements System Setup Connect the power cable to the DVD Premium Pro Series tower and plug in to a protected power outlet strip or UPS power supply Turn on power to the tower The system is now ready to use Install your DVD Premium Pro Series duplicator in the following environment On a level and stable surface In a well ventilated location Temperature and humidity Temperature 5 40 Humidity 20 80 RH no dew formation Do not install it in the following places Under direct sunlight If the machine is exposed to sunlight the light should be blocked by a curtain or blind A dusty location A place where there is a lot of vibration Near open flame A place where the temperature and humidity change drastically Near a heating device such as a heater or furnace A location where air from an air conditioner blows directly onto the unit Near a container filled with water In winter during times of low humidity or in a location where static electricity is generated use an anti static electricity mat or humidifier to prevent static electricity P pply ower su Use house current as the power source for the unit Do not use an outlet near a motor driven appliance i e air conditioner copying machine Use an outlet with stable p
8. 4 Press the NO or Y button until you the screen displays MASTER CLEAR HDD MASTER CLEAR HDD 5 Press the YES button 6 You can now select which hard drive partition to erase Pressing the NO or Y button will scroll you though the partition selections 7 Press the YES button if you are sure you want to clear the HDD 8 The hard drive will now be cleared and you will be asked if you want to register another master to the HDD gt HDD1 DISC to HDD 9 Press YES and the Reader drive will eject and you can insert another master to register to the HDD REGISTER 4 0GB DVD TTI 25 10 Press NO and to exit this menu without registering data to the hard drive partition Simulation Disc to Disc Important Simulation is not allowed when using DVD R RW media 1 At the COPY START DISC to DISC menu press the NO or Y button until the display shows SIMULATION DISC to DISC SIMULATION DISC to DISC Place the Master Disc into the Reader drive Place the blank disc s into the Recorder drive s and wait 10 seconds for the light s on the front of the Recorder s to stop blinking Press YES The drive trays will open on any recorder without blank discs installed If you do not want to make a copy in those drives close the tray s wait for the drive light to go out and then press the YES button to start the copy job 6 The display will now show the progress of the Simulation Copy Job SIMULATION 4 0GB DVD ETTTI2
9. 4D NN TAGGED OVERLAPPED COMMANDS NN QUEUE 20 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC OVAERLAPPED COMMANDS ATTEMPTED ERASE FAILURE ERASE FAILURE Incomplete erase operation detected 53 00 MEDIA LOAD OR EJECT FAILED 53 02 MEDIUM REMOVAL PREVENTED 55 00 SYSTEM RESOURCE FAILURE 57 00 UNABLE TO RECOVER TABLE OF CONTENTS 5A 00 OPERATOR REQUEST OR STATE CHANGE INPUT 5A 01 OPERATOR MEDIUM REMOVAL REQUEST 5A 02 OPERATOR SELECTED WRITE PROTECT 5A 03 OPERATOR SELECTED WRITE PERMIT 5B 00 LOG EXCEPTION 5B 01 THRESHOLD CONDITION MET 5B 02 LOG COUNTER AT MAXIMUM 5B 03 LOG LIST CODES EXHAUSTED 5D 00 FAILURE PREDICTION THRESHOLD EXCEEDED 5D 01 FAILURE PREDICTION THRESHOLD EXCEEDED Predicted Media Failure 5D 03 FAILURE PREDICTION THRESHOLD EXCEEDED Predicted Spare Area Exhaustion 5D FF FAILURE PREDICTION THRESHOLD EXCEEDED FALSE 5E 00 LOW POWER CONDITION ON 5E 01 IDLE CONDITION ACTIVATED BY TIMER 5E 02 STANDBY CONDITION ACTIVATED BY COMMAND 5E 03 IDLE CONDITION ACTIVATED BY COMMAND 5E 04 STANDBY CONDITION ACTIVATED BY COMMAND 63 00 END OF USER AREA ENCOUNTERED ON THIS TRACK ILLEGAL MOD
10. 5 7 The Recorder s will eject the DVD R discs when the job is complete Note DVD R media will recorded to in Simulation Mode Erasing RW media 1 Atthe COPY START DISC to DISC menu press the NO or Y button until the display shows DISC ERASE REWRITABLE DISC ERASE REWRITABLE 2 Load the Recorder s with the CD RW or DVD RW media you wish to erase You can erase one disc at a time or fill all the Recorders to erase multiple discs at once All discs loaded must be of the same type 3 Press the YES button 10 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC 4 The next screen asks if you want to perform a Quick Erase QUICK ERASE If you wish to perform a Full Erase press the NO button FULL ERASE Pressing the YES button at either of these selections will show the following screen SURE 5 Press the YES button if you are sure you want to erase the DVD RW disc If you do not wish to erase the disc press the NO button and you will go back to the DISC ERASE screen step 1 6 The screen will now show DISC ERASE 7 Once the erasing is complete the Recorder s will eject the disc s Track Extraction When extracting tracks to the internal hard drive the DVD Premium Pro Series will use the next available partition space on the hard drive Like any time a master is registered to the hard drive you have the ability to name the partition 1 Atthe COPY START Menu
11. DVD R RW DL CD R RW Copy and Verify Hard drive comes standard for standalone DVD CD image archival and CD track extraction for audio compilation CDs Store multiple hard drive images Counter feature allows the user to input how many discs need to be copied and the keeps track of the total discs completed Automatically detects DVD or CD masters Simulation mode to ensure recording stability Easy to read two line display for status and error reporting Updates easily installed through DVD CD reader Unpacking your system When unpacking your duplicator confirm the following items are included e DVD Premium Pro Series duplicator e Power cable e Starter Kit includes Manual and Warranty information If any of these items are missing please contact or Microboards Technology Technical Support at 952 556 1639 IMPORTANT Please keep all the packing for your DVD Premium Pro Series duplicator If your unit ever needs to be sent in for service it must be returned in the original packing or the warranty will be voided Microboards Statement Regarding Improper Duplication Microboards Technology fully supports the right of any business organization group or individual to protect their property from unlicensed unauthorized or illegal duplication As a user of our equipment we expect you to support that right as well Microboards Technology is neither responsible nor liable for the infringement of any laws regarding the illegal duplication of
12. E FOR THIS TRACK INVALID PACKET SIZE VOLTAGE FAULT 72 00 SESSION FIXATION ERROR 72 01 SESSION FIXATION ERROR WRITING LEAD IN 72 02 SESSION FIXATION ERROR WRITING LEAD OUT 72 03 SESSION FIXATION ERROR INCOMPATIBLE TRACK IN SESSION 72 04 EMPTY OR PARTIALLY WRITTEN RESERVED TRACK 72 05 NO MORE RZONE RESERVATIONS ARE ALLOWED 73 00 CD CONTROL ERROR POWER CALIBRATIOIN AREA ALMOST FULL POWER CALIBRATION AREA IS FULL POWER CALIBRATION AREA ERROR 73 04 PROGRAM MEMORY AREA UPDATE FAILURE PROGRAM MEMORY AREA RMA 15 FULL PROGRAM MEMORY AREA RMA IS almost FULL MEDIA LOAD EJECT MECHANISM FAILED PLAY OPERATION ABORTED VENDOR SPECIFIC 21 DVD Premium Pro Series Specifications MICROBOARDS TECHNOLOGY LLC DVD Recorder Drive DVD R RW DL CD R RW Recorder Power Source 115V 230V 50 60Hz switchable power supply Weight 58 pounds Dimensions 7 48 W x 16 75 D x 24 5 H Power supply 400W Environment Temperature 40 C 104 F 5 C 41 F Humidity 20 80 Supported Formats CD ROM Mode 1 CD ROM XA Mode 2 form 1 form 2 Recording format SE Photo CD CD DA Audio CD CD Extra CD R CD RW DVD DVD ROM DVD R RW DL DVD VIDEO CD 700 Recording capacity nominal DVD 4 7GB for General DVD 8 3GB for Dua
13. ELECTION NO REFERENCE POSITION FOUND LOGICAL UNIT COMMUNICATION FAILURE LOGICAL UNIT COMUUNICATION TIME OUT LOGICAL UNIT COMMUNICATION PARITY ERROR LOGICAL UNIT COMMUNICATION CRC ERROR ULTRA DMA 32 TRACK FOLLOWING ERROR TRACKING SERVO FAILURE FOCUS SERVO FAILURE SPINDLE SERVO FAILURE ERROR LOG OVERFLOW WARNING WARNING SPECIFIED TEMPERATURE EXCEEDED WARNING ENCLOSURE DEGRADED WRITE ERROR 18 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC 0 02 WRITE ERROR RECOVERED WITH AUTO REALLOCATION 0C 03 WRITE ERROR RECOMMEND REASSIGNMENT 0C 07 WRITE NEEDED 0C 08 WRITE ERROR RECOVERY FAILED 0C 09 WRITE ERROR LOSS OF STREAMING 0C 0 WRITE ERROR PADDING BLOCKS ADDED 11 00 UNRECOVERED READ ERROR 11 06 UNRECOVERED ERROR 15 00 RANDOM POSITIONING ERROR 15 01 MECHANICAL POSITIONING ERROR 15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM 16 00 DATA SYNCHRONIZATION MARK ERROR 16 01 DATA SYNC ERROR DATA REWRITTEN 16 02 DATA SYNC ERROR RECOMMEND REWRITE 16 03 DATA SYNC ERROR DATA ATUO REALLOCATED 16 04 DATA SYNC ERROR RECOMMEND REASSIGNMENT 17 00 RECOVERED DATA WITH NO ERROR CORRECTION APPL
14. HDD Setups O od 14 Auto Generalen cscs uu uku au akuy ER 14 Edit NATI nan DEDE DE nnn POL DA na mana a naa Diode d 14 Master ret IG in 14 eii eT T C TET 14 Drive driquiry ote 15 SR Le MR 15 FAM EIOS nt apanapa DRE DR DU D ERU DEDI DEB DG ma Dun aa DIE aa ak 15 15 Error CodeS po EHE hens e po kp be pet ehe og 16 DPC CHIC ALONG 22 Supported Formats EEN ER len UE ER Technical Supporte EE 22 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC System Overview The DVD Premium Pro Series includes the Tower and the Rackmount styles The Tower employs up to 10 General Purpose DVD R DL recorders while the Rackmount employs up to 4 recorders The hard drive comes standard with the Pro system and allows for DVD CD image archival and CD track extraction for CD audio compilations An intuitive menu driven display and 5 button control interface provide one touch operation for the novice user while providing advanced MICROBOARDS features for the professional 2 Technology Advanced Features e Stand Alone DVD R RW DL CD R duplicator One Touch duplication Auto Run option Speed selectable 1x to 16x for DVD R and 4x to 48x for CD R Supports writing to
15. IED 17 01 RECOVERED DATA WITH RETRIES 17 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET 17 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET 17 04 RECOVERED DATA WITH RETRIES AND OR CIRC APPLIED 17 05 RECOVERED DATA USING PREVIOUS SECTOR ID 17 06 RECOVERED DATA WITHOUT ECC DATA AUTO REALLOCATED 17 07 RECOVERED DATA WITHOUT ECC RECOMMEND REASSIGNMENT 17 08 RECOVERED DATA WITHOUT ECC RECOMMEND REWRITE 17 09 RECOVERED DATA WITHOUT ECC DATA REWRITTEN 18 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED 18 01 RECOVERED DATA WITH ERROR CORR amp RETRIES APPLIED 18 02 RECOVERED DATA DATA AUTO REALLOCATED 18 03 RECOVERED DATA WITH CIRC 18 04 RECOVERED DATA WITH L EC 18 05 RECOVERED DATA RECOMMEND REASSIGNMENT 18 06 RECOVERED DATA RECOMMEND REWRITE 18 07 RECOVERED DATA WITH ECC DATA REWRITTEN 19 00 DEFECT LIST NOT ERROR 19 01 DEFECT LIST NOT AVAILABLE 19 02 DEFECT LIST ERROR IN PRIMARY LIST 19 03 DEFECT LIST ERROR IN GROWN LIST 1A 00 PARAMETER LIST LENGTH ERROR 1B 00 SYNCHRONOUS DATA TRANSFER ERROR 1C 00 DEFECT LIST NOT FOUND 01 DEFECT LIST FOUND 02 GROWN DEFECT LIST NOT FOUND 1D 00 MISCOMPARE DURING VERIFY OPERATION 20 00 INVALID COMMAND OPERATION CODE 21 00 LOGICAL BLOCK ADDRESS OUT OF RANGE 21 02 INVALID ADDRESS FOR WRITE 24 00 INVALID FIELD IN CDB 25 00 LOGICAL UNIT NOT SUPPORTED 26 00 INVALID FIELD IN PARAMETER LIST 26 01 SUPPORTED 26 02
16. INSTALLED 30 01 CANNOT READ MEDIUM UNKNOWN FORMAT 30 02 CANNOT READ MEDIUM INCOMPATIBLE FORMAT 30 05 CANNOT WRITE MEDIUM INCOMPATIBLE FORMAT 30 06 CANNOT FORMAT MEDIUM INCOMPATIBLE MEDIUM 30 08 CANNOT WRITE APPLICATION CODE MISMATCH 30 09 CURRENT SESSION NOT FIXATED FOR APPEND 31 00 MEDIUM FORMAT CORRUPTED 31 01 FORMAT COMMAND FAILED 32 00 NO DEFECT SPARE LOCATION AVAILABLE 32 01 DEFECT LIST UPDATE FAILURE 35 00 ENCLOSURE SERVICES FAILURE 35 01 UNSUPPORTED ENCLOSURE FUNCTION 35 02 ENCLOSURE SERVICES UNAVAILABLE 35 03 ENCLOSURE SERVICES TRANSFER FAILURE 35 04 ENCLOSURE SERVICES TRANSFER REFUSED 37 00 ROUNDED PARAMETER 39 00 SAVING PARAMETERS NOT SUPPORTED 3A 00 MEDIUM NOT PRESENT 3A 01 MEDIUM NOT PRESENT CLOSED 3A 02 MEDIUM NOT PRESENT TRAY OPEN 3D 00 INVALID BITS IN IDENTIFY MESSAGE 3E 00 LOGICAL UNIT HAS NOT SELF CONFIGURED YET 3E 01 LOGICAL UNIT FAILURE 3E 02 TIMEOUT ON LOGICAL UNIT 3F 00 TARGET OPERATING CONDITIONS HAVE CHANGED 3F 01 MICROCODE HAS BEEN CHANGED 3F 02 CHANGED OPERATING DEFINITION 3F 03 INQUIRY DATA HAS CHANGED 40 NN DIAGNOSTIC FAILURE ON COMPONENT NN 80H FFH 43 00 MESSAGE ERROR 44 00 INTERNAL TARGET FAILURE 45 00 SELECT OR RESELECT FAILURE 46 00 UNSUCCESSFUL SOFT RESET 47 00 SCSI PARITY ERROR 48 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED 49 00 INVALID MESSAGE ERROR 4A 00 COMMAND PHASE ERROR 4B 00 DATA PHASE ERROR 4 00 LOGICAL UNIT FAILED SELF CONFIGURATION
17. IST CODES EXHAUSTED 5D 00 FAILURE PREDICTION THRESHOLD EXCEEDED Predicted Logical Unit Failure 5D 01 FAILURE PREDICTION THRESHOLD EXCEEDED Predicted Media Failure 5D FF FAILURE PREDICTION THRESHOLD EXCEEDED FALSE 5E 00 LOW POWER CONDITION ON 5E 01 IDLE CONDITION ACTIVATED BY TIMER 5E 02 STANDBY CONDITION ACTIVATED BY COMMAND 5E 03 IDLE CONDITION ACTIVATED BY COMMAND 5E 04 STANDBY CONDITION ACTIVATED BY COMMAND 63 00 END OF USER AREA ENCOUNTERED ON THIS TRACK 63 01 PACKET DOES NOT FIT IN AVAILABLE SPACE 64 00 ILLEGAL MODE FOR THIS TRACK 65 00 VOLTAGE FAULT 73 00 CD CONTROL ERROR Write Errors VENDOR SPECIFIC Description NO ADDITIONAL SENSE INFORMATION T O PROCESS TERMINATED PLAY OPERATION ABORTED AUDIO PLAY OPERATION IN PROGRESS AUDIO PLAY OPERATION PAUSED AUDIO PLAY OPERATION SUCCESSFULLY AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR NO CURRENT AUDIO STATUS TO RETURN NO SEEK COMPLETE LOGICAL UNIT NOT READY CAUSE NOT REPORTABLE LOGICAL UNIT IS IN PROCESS OF BECOMING READY LOGICAL UNIT NOT READY INITIALIZING CMD REQUIRED LOGICAL UNIT NOT READY MANUAL INTERVENTION REQUIRED LOGICAL UNIT NOT READY FORMAT IN PROGRESS LOGICAL UNIT NOT READY OPERATION IN PROGRESS LOGICAL UNIT NOT READY LONG WRITE IN PROGRESS LOGICAL UNIT DOES NOT RESPOND TO S
18. MICROBOARDS Technology DVD Premium Pro Series Tower and Rackmount Users Manual www microboards com Version 1 05 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC TABLE OF CONTENTS System Overvi W e 5 Unpacking your a ERA ANA 5 Microboards Statement Regarding Improper Duplication 5 ef ENEE ET EE 6 Mari ET EE 7 Copy DISC to uma oa 8 Registering Data to the Hard Drive 8 Copy Hard Drive HDDY to DISC ee 9 Clearing the Hard Drive 9 Simulation Disc to EE 10 Erasing RW Media erete Dc 10 Track DP a 11 Error status in Track Extraction 12 ee MEM EE 13 Mode ol le PR 14 DVD SDe60 pene eter 14 CD WR ost tesi Nery vena ama lore ret 14 ISRC CHECK nde bet rod saq naqa saq naqa a saq ege 14 14 CODY kuru ananas marsu A 14 Session e TONS 14 Reader Pompey te Were E umeme am E eR 14
19. RE 0A 00 ERROR LOG OVERFLOW 0B 00 WARNING 0B 01 WARNING SPECIFIED TEMPERATURE EXCEEDED 0B 02 WARNING ENCLOSURE DEGRADED 10 00 ID CRC OR ECC ERROR 11 01 UNRECOVERED READ ERROR 11 02 ERROR TOO LONG TO CORRECT 11 05 L EC UNCORRECTABLE ERROR 11 06 CIRC UNRECOVERED ERROR 11 OF ERROR READING UPC EAN NUMBER 11 10 ERROR LOSS PF STREAMING 12 00 ADDRESS MARK NOT FOUND FOR ID FIELD 13 00 ADDRESS MARK NOT FOUND FOR DATA FIELD 14 01 RECORD NOT FOUND 14 05 RECORD NOT FOUND RECOMMEND REASSIGNMENT 14 06 RECORD NOT FOUND DATA AUTO REALLOCATED 15 00 RANDOM POSITIONING ERROR 15 01 MECHANICAL POSITIONING ERROR 15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM 17 00 RECOVERED DATA WITH NO EEOR CORRECTION APPLIED 17 01 RECOVERED DATA WITH RETRIES 17 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET 17 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET 17 04 RECOVERED DATA WITH RETIES AND OR CIRC APPLIED 17 05 RECOVERED DATA USING PREVIOUS SECTOR ID 18 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED 18 01 RECOVERED DATA WITH ERROR CORP amp RETRIES APPLIED 18 03 RECOVERED DATA WITH CIRC 18 04 RECOVERED DATA WITH L EC 1A 00 PARAMETER LIST LENGTH ERROR IB 00 SYNCHRONOUS DATA TRANSFER ERROR 16 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC
20. XXX XXXXXXX No caption indicates display sequence Pange rien cep e re C Ma MUS AE e SER ARTE A LU IS PS CI r4 e os eet pe dM Exc asw ERR Sri APP Port A Back NO or Y Forward YES Accept or ESC Return to Menu 13 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Setup Menu 1 At the COPY START DISC to DISC menu press the NO or Y button until the display shows SETUP MODE CHANGE SETUP MODE CHANGE 2 Press the YES button 3 first setup option is Mode Select followed by Copy DISC to HD DISC Write Speed ISRC Check Copy Quantity Session Mode Drive Inquiry Firmware Version and Exit Pressing the NO or Y button will allow you to move from menu to menu Pressing the YES button will allow you to view or change the configuration of the system Please follow the flow chart on page 12 to navigate through the different menus is description of each setup menu Mode Select COPY Duplication from master disc to blank disc or HDD to blank disc if master data is registered VERIFY It compares a copied disc with the master disc COPY V Copying in the COPY VERIFY mode DVD WR Speed Available speeds range from 16x down to 1x CD WR Speed Available speeds range from 48x down to 4x ISRC Check Default setting is ON This feature will copy the ISRC codes from the Master audio disc to the
21. are designed to provide reasonable protection against harmful interference in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense This product is in conformity with the EMC Directive 89 336 EEC through compliance with the following European standards EN 55022 EN 55024 The CE mark has been affixed in accordance with the CE Marking Directive 93 68 EEC Canadian Department of Communications DOC Statement This Class A digital apparatus complies with the Canadian ICES 003 Issue 4 2004 Cet appareil numerique de la classe A est conforme a la norme NMB 003 du Canade 23
22. cordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and antenna Connect the equipment into an outlet on a circuit different than that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help standards EN 55022 EN 55024 The CE mark has been affixed in accordance with the CE Marking Directive C This product is conformity with the EMC Directive 89 336 EEC through compliance with the following European 93 68 EEC Canadian Department of Communications DOC Statement This Class B digital apparatus complies with the Canadian ICES 003 Issue 4 2004 Cet appareil numerique de la classe B est conforme a la norme NMB 003 du Canade Rackmount Models Any unauthorized modification to this equipment may result in the revocation by the FCC of the user s authority to operate this equipment NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits
23. erase all hard drive partition images 14 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Drive Inquiry Displays an inquiry of each drive connected showing drive model and firmware F W Version Shows DVD Premium Pro Series firmware version and H W information F W Update Used when updating the firmware of the DVD Premium Pro Series duplicator Log Displays the number of successful and unsuccessful discs over the entire life of the duplicator 15 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Error Codes Read Errors 00 17 CLEANINF REQUESTED 01 00 NO INDEX SECTOR SIGNAL 02 00 NO SEEK COMPLETE 04 00 LOGICAL UNIT NOT READY CAUSE NOT REPORTABLE 04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY 04 02 LOGICAL UNIT NOT READY INITIALIZING CMD REQUESTED 04 03 LOGICAL UNIT NOT READY MANUAL INTERVENTION REQUIRED 04 07 LOGICAL UNIT NOT READY OPERATION IN PROGRESS 05 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION 06 00 NO REFERENCE POSITION FOUND medium may be upside down 08 00 LOGICAL UNIT COMMUNICATION FAILURE 08 01 LOGICAL UNIT COMUUNICATION TIME OUT 08 02 LOGICAL UNIT COMMUNICATION PARITY ERROR 08 03 LOGICAL UNIT COMMUNICATION CRC ERROR ULTRA DMA 32 09 00 TRACK FOLLOWING ERROR 09 01 TRACKING SERVO FAILURE 09 02 FOCUS SERVO FAILURE 09 03 SPINDLE SERVO FAILU
24. l Layer Applicable media CD CD R CD RW DVD DVD R DVD RW DVD R DL Firmware Updates Occasionally it may be necessary to load updated firmware on to the DVD Premium Pro Series duplicator Only those firmware versions recommended and provided by Microboards Technical Support for this specific product should be installed Installation of an incorrect firmware on any Microboards Technology product may result in any remaining warranty being voided Technical Support For technical questions or support issues contact Microboards Technology technical support United States PH 952 556 1639 FAX 952 556 1628 support microboards com www microboards com Europe Japan PH 44 0 845 230 7800 PH 03 3561 2266 www microboards co uk www microboards co jp Please have the Model and Serial Number of your duplicator available when contacting Technical Support 22 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Tower Models Any unauthorized modification to this equipment may result in the revocation by the FCC of the user s authority to operate this equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in ac
25. lay will show HDD1 If this is the hard drive partition you wish to copy press the YES button 6 screen will display COPY START HDD1 to DISC COPY START HDD1 to DISC St F e 7 f you wish to select a different hard drive partition press the NO or Y button in step 5 unit the display shows the partition you wish to copy 8 Place the blank disc s into the Recorder s and wait 10 seconds for the light s on the front of the Recorder s to stop blinking 9 Press the YES button If you have the Auto Run feature set to ON the duplication will begin when all drives are loaded with blank media 10 The drive trays will open on any recorder without blank discs installed If you do not want to make a copy in those drives close the tray s wait for the drive light to go out and then press the YES button to start the copy job 11 The display will now show the progress of the copy job from the HDD to the Recorder s COPY 4 0GB DVD ETTII25 12 After the Copy job is complete the disc s will be ejected from the Recorder s Clearing the Hard Drive HDD The Master Clear option will not appear if there is no information stored on any of the hard drive partitions 1 Atthe COPY START HDD1 to DISC menu press the NO or Y button until the display shows MASTER SELECT HDD1 to DISC 2 Press the YES button 3 The display will show READER DISC to DISC DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC
26. nto the Reader drive Press the YES button The display will show READER DISC to DISC Press the NO or button The display will now show DISC to HDD 4 2GB The number in the lower right corner of the display indicates the amount of free space remaining on the hard drive You will see this screen after the contents of the master have been analyzed NAME 4 2GB C If you do not have the Auto Generate in the Setup menu feature turned on use the Aor Y buttons to change the character in the position shown by the cursor Press the YES button to move the cursor to the right or NO to move back to the left Once the cursor is on the 14 character press YES to begin registering the master DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC 8 The display will now show the progress of the data being transferred to the hard drive REGISTER 4 2GB DVD MT 1 25 9 Once the Master disc has been copied to the HDD the Reader drive will eject the disc When you go back into the MASTER SELECT Menu and select a partition with data stored on it the display will show the type of data ROM or Video and the capacity of that data Proceed to COPY HDD TO DVD section Copy Hard Drive HDD to Disc 1 Follow the instructions on page 8 to register the Master to the HDD Press to NO or Y button until the screen displays MASTER SELECT DISC Press the YES button The display will show READER Press the NO or Y button and the disp
27. other master audio discs NEXT MASTER Press YES to extract more tracks from other master audio discs Press NO to complete extraction 8 If you press NO the CWT Pro Series moves back to COPY menu so that you can copy the extracted tracks in HDD to blank CD R media COPY START HDD to DISC Error status in Track Extraction In the following situation in TRACK EXTRACTION the CWT Pro Series shows an error status on the LCD 1 If you try to extract a track which is not CD DA the track number does not display properly showing TRE TIKI Pressing the YES button will not add the track 2 If the total time of extracted audio tracks is over 80 minutes or 99 tracks have already been selected EXTRACT THE the CWT Pro Series displays OVER Pressing the 06 12 OVER YES button will not add the track 12 DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Setup Menu MODE SELECT Y COPY V COPY MODE DISC to DISC DVD WR SPEED MAX CLOSE OPEN EE WEE E e EE THE DISPLAY WILL CYCLE THROUGH THE MAKE MODEL AND FIRMWARE OF THE SELECTED DRIVE UNTIL YOU PRESS A BUTTON MASTER CLEAR Select Partition HDD FORMAT YES or NO THE DISPLAY WILL CYCLE THROUGH THE MAKE MODEL AND FIRMWARE OF THE SELECTED DRIVE UNTIL YOU PRESS A BUTTON Premium Pro 1020 VER A BC Updating Complete Caption indicates button to press XXXX
28. ower supply voltages Do not overload an outlet Do not use a service outlet from a PCs or other office machine Wire the power cord properly Do not touch the power cord with wet hand Be careful not to damage the power cord Inspect the power cord periodically In the event that the power cord is damaged replace the power cord Do not use your finger Be sure to use tool such as the screwdriver to change the 115 230 Switch DVD Premium Pro Series MICROBOARDS TECHNOLOGY LLC Main Menu The Arrow buttons A allow you to move forward or backward in the menu without selecting the current menu item The NO button will move you to the next menu item YES will select the current menu item YES INSERT MASTER DISC START DISCtoDISC NO Y MASTER SELECT YES READER CH DISCtoDISC gt DiSCtoDISC INSERT ANALYZING MASTER COPY 15 26 TARGET DISC CD DA ELLO 20 Y Nov HDD1 CD DA gt HDD1 15 26 COPY START INSERT COPY 15 26 HDDtoDISC HDDtoDISC HDD1toDISC TARGET DISC CD DA ELTITI20 T NO Y NO Y gt HDD2 YES REGIST 15 26 COPY START INSERT COPY 15 26 DISCtoHDD DISC CD DA MEILI 20 HDD2toDISC gt TARGET DISC CD DA BI 2096 yov
29. s for the light s on the front of the Recorder s to stop blinking Note that the blanks must be of the same media type as the master you cannot copy a CD master to DVD s for instance The display reads COPY START DISC to DISC O o o lt amp a 3 DISC to DISC Press YES If you have the Auto Run feature set to ON the duplication will begin when the master is loaded and all drives are loaded with blank media The drive trays will open on any recorder without blank discs installed If you do not want to make a copy in those drives close the tray s wait for the drive light to go out and then press the YES button to start the copy job The display will now show the progress of the Copy Job COPY 4 0GB DVD ETTII25 The Recorder s will eject the recordable discs when the job is complete Registering Data to the Hard Drive HDD When registering data to a partition on the internal hard drive you do have the option of recording to the blank media as well In the SETUP menu go to Copy DISC to HD DISC and change the setting from OFF to ON This will allow the data from the master disc to be copied to the internal hard drive as well as any blank discs you have in the recorders See page 19 for a description of the SETUP menu 1 Pain At the COPY START DISC to DISC menu press the NO or Y button until the display shows MASTER SELECT DISC TO DISC MASTER SELECT DISC to DISC Place the Master disc i
Download Pdf Manuals
Related Search