Manitowoc Ice K00017 User's Manual
Contents
1. for uncrating and inspection of B ice machine B Remove right hand side panel and bottom four C screws on left hand side panel D C Set E 0400 ice machine on E 0600 ice machine with right hand sides in line NOTE flange on top cover should be inside left hand side panel Install four screws in bottom left hand side panel Bolt right hand sides of ice machines together with 1 4 20 x 5 8 long bolt lock washer and nut provided in kit F Reattach right hand side panels My Manitowoc Ice Inc 2110 South 26 Street P O Box 1720 Manitowoc WI 54221 1720 USA mounting brackets over angle B on E 0600 ice machine Illustration 3 Put angle A in slots of top mounting brackets and secure in place Check for free movement of water curtains Proceed to ice machine service manuals for electrical and water hook up and start up procedure Telephone 920 682 0161 Fax Sales 920 683 7589 Service Parts 920 683 7585 Other 920 683 7879 8001403 Web Site www manitowocice com Rev 05 11 012. k l Manitowoc ICE MACHINES amp REACH INS K00017 STACKING KIT Installation Instructions 1 The K00017 stacking kit is used for stacking an E 0400 on an E 0600 ice machine The bin must be leveled 4 INSTALLATION OF WATER SHIELD before proceeding NOTE THIS STACKING KIT IS A Remove angle A the water pump float valve ALSO USED WHEN STACKING G 0600 ON G 0800 bracket assembly and sump trough from top ice ICE MACHINES machine 2 INSTALLATION OF E 0600 ICE MACHINE B Remove existing sheet metal screw at lower right A See service manual for uncrating and inspection of ice machine B Remove top cover from ice machine NOTE do not put screws back in corner of bulkhead below siphon tube Locate water shield above the lower machine s electrical box Use existing screw to fasten flange of shield to bulkhead Apply RTV sealant to the top edges of flange to C Set ice machine carefully and squarely on bin provide a watertight seal D Position shim angle provided in kit on right side as C Reinstall the sump trough float valve bracket shown in Illustration 1 assembly and water pump E Add foam tape as shown in Illustration 1 F With four screws install top cover from kit on left side of ice machine NOTE flange goes over side 5 INSTALLATION OF ICE CHUTE panel A Remove the ice chute from kit and set bottom G Remove right hand side panel 3 INSTALLATION OF E 0400 ICE MACHINE A See service manual
Download Pdf Manuals
Related Search