Lightolier V7011 User's Manual
Contents
1. B CARE AND MAINTENANCE OF ALZAK REFLECTOR Schein THUMBSCREW If handling of reflectors with anodized or Alzak finish is required the use of clean white or plastic film gloves is INSIDE recommended to avoid fingerprints REFLECTOR MOUNTING FRAME INSIDE REFLECTOR HOUSING Anodized or Alzak surfaces can be cleaned by the following methods 1 Wipe of with a soft clean dry lint free cloth 2 Wipe off with a clean cloth dampened in mild detergent solution Rinse then wipe dry with lint free cloth or paper towel S 3 Wipe off with a clean cloth dampened with a i solution of wetting agent and water such as 2 oz wire Petes Bl i per gallon Pluronic L62 LF by Wyandotte Products or a liquid wax such as Glass Wax Then wipe dry CUT OUT FIG 4 Avoid gritty cleaning agents WINDOW US Pat No 4 039 822 i ics iT Ol i tae NEW JERSEY 07096 d MONTREAL QUEBEC CANADA2. INSTRUCTION SHEET NO INSTALLATION OF CALCULITE ALAMP WALL WASHER DOWNLIGHT REFLECTOR a INSTRUCTION SHEET FOR ITEMS V7009 V7010 V7011 1088 W7009 W7010 w7011 READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE This fixture is intended for installation in accordance with the National Electrical Code and local or federal code specifications To prevent electrical shock turn off electricity at fuse box before proceeding Retain these instructions for maintenance reference LAMPHOLDER SPRING WALL WASHER REFLECTOR HOUSING ADJUSTABLE LAMPHOLDER HOUSING ia el J RETAINING SPRING Y y gt DOWNLIGHT REFLECTOR Ne CARDBOARD PAINT SHIELD FIG 1 WARNING RISK OF FIRE DO NOT INSTALL INSULATION WITHIN 3 INCHES OF FIXTURE SIDES OR WIRING COMPARTMENT NOR ABOVE FIXTURE IN SUCH A MANNER SO AS TO ENTRAP HEAT A INSTALL INSIDE REFLECTOR FIG 1 NOTE For overlapping trim installation slip on WHITE REFLECTOR TRIM RING over INSIDE REFLECTOR as shown in Fig J 2 and 3 For flangeless trim installation WHITE TRIM WHITE RING is not required TRIM To install INSIDE REFLECTOR in REFLECTOR m HOUSING with THUMB SCREWS Fig 4 push INSIDE C C gt WHITE REFLECTOR up into REFLECTOR HOUSING Rotate INSIDE REFLECTOR so that CUT OUT WINDOW is FIG 2 FIG 3 always opposite the wall to be lighted Now tighten the THUMBSCREWS so that INSIDE REFLECTOR is held firmly against ceiling surface
Download Pdf Manuals
Related Search