LG G1500 User's Manual
Contents
1. PM 62 e Calculator Menu 7 1 63 e World time Menu 7 4 63 Internet Menu 8 64 e Home Menu 8 1 64 e Bookmarks Menu 8 2 M 64 e Profiles Menu 8 3 eMe 64 e Cache settings Menu 8 4 5 67 e Security Menu 8 5 67 Reset profiles Menu 8 6 67 Internet On line menu 5 2522 22 68 Additional Functions How to Use Data and Fax call 69 e Sending Data or Fax 69 e Receiving Data or Fax Calls Jr 69 in call Feng ada vu ui mE ccu dap 71 e During 71 Multiparty or Conference Calls Rada tux y uuu kgs 73 ADPBESDITEB sa ee eee 75 Care and Maintenance su rr rrr rr asa daaa Yaa nnt nnn 76 Technical Data KR 78 Part of the Phone Overview Front of the Phone 1 Earpiece 8 END PWR keys 2 Display Screen 9 Numeric Keys 3 Soft Left Key 10 Hash Key 4 Navigation Keys 11 Microphone 5 Send Key 12 Ear Microphone 6 Star Key Connector 7 Soft Right Key 13 Cancel Key Overview Rear of the Phone N VI Battery Cable Connector Battery Charging Connector Battery Terminals SIM Card Socket Handstrap Hole Bat2. Get number If the selected message has the phone number you can extract and save it in a phonebook Also you can call by this number Repiy You can reply to the sender by message Return call You can call back to the sender who sent the message automatically 35 Messages Menu 1 Accessing the Menu Outbox Menu 1 3 When you enter this menu you can see the message s Scroll to the desired message by using 7 4 and press V2 to see the message And if you want to exit Outbox menu press J l And if you want to exit outbox menu press cJ In addition you can see Delete all for deleting all outgoing messages at the bottom of the list After reading message press V2 Options to access the following submenus Delete The selected message is deleted Edit You can edit an outgoing message and send or save it Forward You can forward the selected message to the other party Get number If the selected message has the phone number you can extract and save it in a phonebook Also you can call by this number 36 Accessing the Menu Info service Menu 1 4 Dependent to network and subscription Cell Broadcast messages CB Message are text messages by the network to GSM phone users They provide general information such as weather reports traffic news taxis pharmacies and stock prices Each type of information has the number therefore you can contact service provider When you rece
3. PUK2 code 4 to 8 digits EN 20 Security code 4 to 8 digits PE EN 20 Accessing the Menu Phone DOOK EEE EE e Search Names 1 eem MMA eBee eee e Add new Names 2 Speed dial Names 3 e Voice list Names 4 ENE e Caller groups Names 5 o000rorenvnnvonnnnnnnnnnnnanannnnnnnnannnenene e Copy all Names 6 em BBBMBBBRMBBeeeseee e Delete all Names 7 P e Settings Names 8 e Information Names Menu TE LL aad dud eae ad sq da vano Sane eed ka We ens Messages Menu 1 eemm MMARR e eeeeeeey e Write message Menu 1 1 e Inbox Menu 1 2 T OCC Y Outbox Menu 1 3 emnes e nfo service Menu 1 4 e Voice messages Menu 1 5 Namecard Menu 1 6 e Templates Menu 1 7 o o n e Settings Menu 1 8 eemmm MMIRRRRSHeeRI e Check memory Menu 1 9 eme Call Register Menu 2 Missed calls Menu 2 1 Received calls Menu 2 2 Dialled calls Menu 2 3 e Clear recent calls Menu 2 4 e Call charge Menu 2 5 GPRS info Menu 2 6 Profiles Menu 3 e Vi
4. 3 Scroll to highlight Show call costs and Press gt Select to enter The following 4 submenus Last call All calls Remaining and Reset all Q Note e The actual call cost may be different depending on network features billing and tax 42 Accessing the Menu Cost settings Menu 2 5 3 SIM Dependent Set tariff Menu 2 5 3 1 You can set the currency type and the unit price Contact your services providers to obtain charging unit prices To select the currency or unit in this menu you need the PIN2 code 1 Press gt Menu in standby mode 2 Press for direct access or use 7 and ze to enter Call register 3 Scroll to highlight Cost settings and press V2 Select to enter 4 Select Set tariff Set credit Menu 2 5 3 2 This network service allows you to limit the costs of your calls by selected charging units If you select Read the number of remaining unit is shown If you select Change you can change your charge limit 1 Press gt Menu in a standby mode 2 Press for direct access or use 7 and 4 ze to enter Call register 3 Scroll to highlight Cost settings and press V2 Select to enter 4 Select Set credit Auto display Menu 2 5 3 3 This network service allows you to see automatically cost of your last call If you select Yes in Auto display menu you can see the last cost when the call is released 1 Press gt Menu in standby mode 2 Press for direct acc
5. and 4 3 3 You can change unit by pressing V2 Change key 4 You can input the prime number after the decimal place by pressing z key 62 Accessing the Menu 5 You can delete the number you want by pressing Q9 6 Press key or amp 7 Back key if you want to end the process for converting the value Calculator Menu 7 3 This contains the standard functions such as Add Subtract Multiply Divide 1 Input the numbers by pressing numeric keys 2 Press V2 Options to select menu you want such as Add Subtract Multiply Divide Negative Decimal point Equal 3 You can view the result by pressing VO Options key and select equal 4 If you want to continue the calculation repeat the process 5 You can delete the number or sign you want by pressing K 9 6 Press key if you want to end the calculation process World time Menu 7 4 You can view the time for each city around the world when you press 7 4 shortly you can view the city belonged to the different time zone and when you press 7 4 long you can view the all of city on the same time zone If you want to select the country you want press V2 Set key 63 M Internet Menu 8 Accessing the Menu Your phone supports services based on Wireless Application Protocol WAP You can access services supported by your network The services menu allows you to get the information such as news weather reports and flig
6. e Add member You can add the number in Caller groups e View member You can view the number list in Caller groups You can select the member you want by pressing V2 Options then you can enable the submenu such as Edit Delete 25 Phone book Accessing the Menu Group ring tone You can set the ring tone depending on Group Group icon You can set icon depending on Group e Change name You can change and edit the Group name 0 Note This menu Change name will be displayed only when you select Empty Copy all Names 6 You can copy move entries from SIM card memory to Phone memory or from Phone memory to SIM card memory 1 Open the phonebook first by pressing amp 7 Names in standby mode 2 Scroll to Copy all then press V2 Select to enter this menu 3 Then submenus below will be displayed e SIM to Phone You can copy the entry from SIM Card to Phone memory e Phone to SIM You can copy the entry from Phone memory to SIM Card 26 Accessing the Menu Delete all Names 7 You can delete all entries in SIM Phone and Voice This function requires security code 1 Scroll to Delete all then press V2 Select Then select a memory to erase SIM Phone Voice oa FF AWA N Press amp 7 Names to enter into the phonebook in standby mode And then you will be requested to enter Security code Press gt OK or press 7 Back to cancel Set
7. ENGLISH 008159 14G30O1IN G 3 y a AR VA TN r 2 EN K Revision 1 1 P N MMBB0110901 PRINTED IN KOREA C 0700 GPRS Phone USER S MANUAL MODEL G1500 Please read this manual carefully before operating your set Retain it for future reference TVTNVIN S a4sn GPRS Phone USER S MANUAL MODEL G1500 Please read this manual carefully before operating your set Retain it for future reference G1500 has a polished style which provides users a better feel and convenience ei lil Phone For Your Safety All radio transmitters carry risks of interference with electronics in close proximity LA GSM Phones must be switched off at all times in an aircraft Do not activate near petrol stations fuel depots chemical plants or blasting operations Switch off the phone in any area where are forced by special regulations For example the phone does not allow to be used in hospital because pacemakers and hearing aids can be affected Minor interference may affect TVs radios PCs etc Do not hold the phone in your hand while driving Do not dismantle phone or battery Keep the phone in a safe place out of children s reach since it contains the detachable small parts and create a choking hazard Do not touch the charger with wet hands For your safety use ONLY specified ORIGINAL batteries and chargers Unusable batteries should be disposed of
8. 6 Reset profiles Sim Service This menu depends on SIM and the network services Messages Menu 1 Accessing the Menu This menu includes functions related to SMS Short Message Service voice mail as well as the network s service messages Write message Menu 1 1 You can write and edit text message up to 1024 characters Also you can check the number of characters 1 Enter the Messages menu by pressing V2 Select 2 If you want to write a new message select Write message in the menu 3 To write a message use T9 text For details see How to Use T9 Page 33 4 When you finish writing your message press V2 Options Then following option menu will be displayed Send Sends the text message 1 If you want to send the text message enter the number you want 2 Your phone asks you to enter the number that you want to send it to 3 After sending it your phone asks whether you will store the edited message 4 Press V2 if you want to store it in Outbox and press if you don t want to 31 Messages Menu 1 Accessing the Menu Save Stores the message in Outbox 1 Your phone asks whether you will save the edited message 2 Press VO if you want to save it in Outbox and press CJ if you don t want to Use template The template is pre defined message You can add the template of the list to the message when you edit it Use namecard The items of the name card are a name mo
9. busy Menu 5 2 Diverts voice calls when the phone is in progress If no reply Menu 5 3 Diverts voice calls which you do not answer If unreachable Menu 5 4 Diverts voice calls when the phone is switched off or out of range All data calls Menu 5 5 Diverts to a number with a PC connection unconditionally All fax calls Menu 5 6 Diverts to a number with a fax connection unconditionally 58 Accessing the Menu The submenus Menu 5 x x Call Divert menus have the submenus as shown below Enable Menu 5 x 1 Activating the corresponding service Voicemail box Menu 5 x x 1 Forwards to message center This function is not included in All data calls and All fax calls menus e Other number Menu 5 x x 2 Inputs the number for diverting Favorite Menu 5 x x 3 Shows the list of 5 diverting numbers Q Note e You can select the number you vvant in Favorite menu Disable Menu 5 x 2 Deactivating the corresponding service Check status Menu 5 x 3 Checking the Status of the corresponding service Cancel all Menu 5 7 Cancels all call divert service 59 Scheduler Menu 6 Accessing the Menu When you enter this menu a Calendar will show up On top of the screen there are sections for date and icons Whenever you change the date the calendar will be updated according to the date And square cursor will be used to locate the certain day If you see under bar on the calendar it
10. displayed in a standby mode e Welcome note Menu 4 3 1 2 This menu allows you to set the message which is shown briefly when the phone is switched on 1 Select Settings Phone settings Display Welcome note 2 Your own text can be displayed If you select this item your phone asks you to edit the message e Backlight Menu 4 3 1 3 You can set the light up duration you want whenever you press a key LCD contrast Menu 4 3 1 4 You can set the brightness of LCD you want by pressing 7 Serial port Menu 4 3 2 FAX You can set the rate of serial port to 19200bps for using the application betvveen PC and fax e GPRS amp Data You can set the rate of serial port to 115200bps for using PC application for GPRS call and Data call 50 Accessing the Menu Language Menu 4 3 3 You can select the language that will be displayed on the phone Call settings Menu 4 4 You can set the menu relevant to a call by pressing V2 Select in Setting menu Minute minder Menu 4 4 1 If you select Yes you can check the call duration by beep sound every minute during a call Any key answer Menu 4 4 2 e Yes Menu 4 4 2 1 If you select this menu you can receive an incoming call by pressing any key except 7 key and key e No Menu 4 4 2 2 If you select this menu you can receive an incoming call by V2 Answer or lt Q Note e How to use Handsfree portable If you want to use the handsfree po
11. in accordance with relevant legislation Only use ORIGINAL accessories to avoid damage to your phone Emergency call may not be available under all cellular networks Therefore you should never depend solely on the phone for essential communications such as medical emergencies Important Information This user s guide contains important information on the use and operation of this phone Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone Any changes or modifications not expressly approved in this user s guide could void your warranty for this equipment Overview Part of the Fn aa E 10 Frontof the PHONG 10 e Rear of the Phone 70 e peas 11 Key Description EEE EN 12 e Alphanumeric Keys 13 Display information Display Tait gai clit EEE 14 On Screen 5 Rt t o een 14 Getting Started Ine Fall SEP LL a ie cud ARE aU cU Ra GA 16 e Inserting the SIM C a E T 16 Installing the Battery EEE EN 16 e Charging the Battery n T 17 e Disconnecting the charger S cs 18 Povvering On Sequence 00 19 e To get started with the phone EE 19 e To turn off the phone OE 19 Access Codes ux ib b 20 PIN code 4 to 8 digits 20 PIN code 4 to 8 digits 20 PUK code 4 to 8 digits ua al NE 20
12. means that there is a schedule that day This function helps to remind you of your schedule and memo The phone will sound an alarm tone if you set alarm for the note For changing the day month and year Key Description Ger ID Yearly Ge ID Monthly If you press these keys shortly you can set the 37 Go alarm daily In case of pressing for a long time you can set it vveekly Add new Menu 6 11 You can edit maximum 30 characters You can take a note You can choose the follovving types of note You can make up to maximum 20 notes Schedule Menu 6 1 11 Input the subject the schedule time the repeat time alarm time by pressing V2 Select Repeat Menu 6 1 1 1 Once norepeat Daily repeat schedule daily for 5 days Weekly repeat schedule weekly for 5 weeks Monthly repeat schedule monthly for 5 months Yearly repeat schedule yearly for 5 years 60 Accessing the Menu e Alarm time Menu 6 1 1 1 1 On time alarm on time you set already 10 min before alarm before 10 minutes from the schedule you set already 30 min before alarm before 30 minutes from the schedule you set already 1 hour before alarm before 1 hour from the schedule you set already 1 day before alarm before 1 day from the schedule you set already Memo Menu 6 1 2 1 Select Add new by pressing V2 Select 2 Scroll to highlight Memo 3 Press VO Select 4 Input the memo and then
13. note that only Car and Headset has this sub menu so that you can activate this function e Disable Even though your phone is ringing your phone will not answer automatically e After 5 secs After 5 seconds your phone will answer automatically e After 10 secs After 10 seconds your phone will answer automatically 0 Note e f you set the Handsfree kit to the phone you can t activate the vibration related with Incoming alert type or Message alert menu Therefore in Car menu you can view the following submenus Incoming alert Ring Silent Message alert Beep No alert 47 E Settings Menu 4 Accessing the Menu You can set the following menus for your convenience and preferences 1 Press gt Menu in standby mode 2 Press amp for direct access to enter Setting Alarm clock Menu 4 1 You can set the phone to alarm at a specified within this menu Enable Menu 4 1 1 You can set the time Hour and Minute for raising the alarm 1 Enter the menu 2 Select Enable by pressing V2 Select and then enter the alarm time you want 3 Press V2 OK 4 Select the repeat period Once Daily Weekly and Monthly 5 f you set in Power off alarm the alarm signal sounds at the time you set even if the phone is turned off Disable Menu 4 1 2 You can cancel setting the alarm time 1 Enter the menu 2 Select Disable by pressing V2 Select 3 Clear alarm message will be displayed when the p
14. the E mail server that you frequently use Connect Connect to the E mail server that you configured Edit address Edit the URL of the E mail server 66 Accessing the Menu Cache settings Menu 8 4 You can remove the contents of Cache memory and change the Cache check mode Clear cache Menu 8 4 1 The contents of Cache memory will be removed Cache check Menu 8 4 2 You can change the time for checking the Cache memory Always Menu 8 4 2 1 The cache is always checked whenever URL is loaded or navigated e Start only Menu 8 4 2 2 The cache is only checked when the WAP is started Off Menu 8 4 2 3 The cache is never checked Security Menu 8 5 A list of the available certificates is shown Reset profiles Menu 8 6 You can reset all the current settings of profiles to the factory default 67 Internet On line menu Accessing the Menu If you are on line you can see the following menus I Home This is the same as Menu 8 11 3 Reload This reloads the current page _1 Bookmarks This is the same as Menu 8 21 L Save as bookmarks Save the current URL as a bookmark You can also edit the bookmark title 4 Go to e mail server Connect to the E mail server that you configured 1 Set as e mail server Save the current URL as an E mail server 68 F How to Use Data and Fax call Additional Functions To be able to data or fax service you need the communicate
15. unauthorized use of your phone When you switch on your phone your phone will request security code always if you set phone lock to Enable If you set phone lock to Automatic your phone will request security code only when you change your SIM card e Enable e Disable e Automatic Automatic key lock Menu 4 5 3 When you enable Automatic key lock keypad will be lock automatically on an idle screen after 25 seconds without any key requesting e Enable e Disable 54 Accessing the Menu Q Note e f you want to lock your phone keypad manually enter Top menu and press lt gt key e f you want to unlock your phone keypad press unlock key and then press gt key But if you enabled Automatic key lock before your phone keypad will be unlock and then after 25 seconds the keypad will be lock up again automatically Call barring Menu 4 5 4 The Call barring service prevents your phone from making or receiving certain category of calls This function requires the call barring password You can view the following submenus All outgoing The barring service of all outgoing calls Outgoing Intl The barring service of all outgoing international calls Outg intl roam The barring service of all international outgoing calls except home network 2 All incoming The barring service of all incoming calls Inc when roam The barring service of all incoming calls when roaming Cancel all You can c
16. will stop after charging completely 18 s Povvering On Sequence Getting Started Q To get started with the phone 1 Press and hold key until you hear a tone 2 Depending on setting PIN Code Menu 4 5 11 you can enter PIN code or not 3 If your phone connects to a network the network name will be displayed shortly To turn off the phone In stand by mode press and hold key until you hear a tone 19 Access Codes Getting Started You can use the access codes described in this section to avoid unauthorized use of your phone The access codes except PUK and 2 codes be changed by using Menu 4 5 6 PIN code 4 to 8 digits The PIN Personal Identification Number code protects your SIM card against unauthorized use The PIN code is usually supplied with the SIM card When PIN code is set Enable your phone will request the PIN code every time it is switched on On the contrary when PIN code is set Disable your phone connects to the network directly without the request PIN code PIN2 code 4 to 8 digits The PIN2 code supplied with some SIM cards is required to access some functions such as Advice of call charge Fixed Dial number These functions are only available if supported by your SIM card PUK code 4 to 8 digits The PUK Personal Unblocking Key code is required to change a blocked PIN code The PUK code may be supplied with the SIM card If not contact your local service p
17. 1 Text Voice Fax Natl paging X400 E mail ERMES Usually the type of message is set to Text You can convert your text into alternative formats which are suitable for the device that will be received the message Contact your service provider for the availability of this function Validity period Menu 1 8 2 This network service allows you to set how long your text messages will be stored at the message center while attempts are made to deliver them to you Status report Menu 1 8 3 If you set Yes in this menu you can check whether your message is sent successfully or not Pay for reply Menu 1 8 41 When a message is sent it allows the person to whom you sent the message to reply and charges the cost of the reply to your telephone bill SMS centre Menu 1 8 51 If you want to send the text message you can get the address of SMS center thru this menu Check memory Menu 1 9 If you select this menu the phone shows an used memory and total amount of memory The total memory is the sum of SIM and Phone memory 40 Call Register Menu 2 Accessing the Menu Missed calls Menu 2 1 This menu shows recent missed call number s You can call by this number save it or view date and time in this menu Received calls Menu 2 2 You can check the recent received numbers You can call by this number save it or view date and time in this menu Dialled calls Menu 2 3 You can check the recent diall
18. age category in active list by pressing Select Voice messages Menu 1 5 You can listen to your voice message s and get the voicemail centre number Listen to voice message Menu 1 5 1 You can call voicemail centre if you want to listen to voice message 38 Accessing the Menu Voice mailbox number Menu 1 5 2 You can get the voicemail if this feature is supported by the network service provider When new voicemail is arrived the symbol will be displayed on the screen Please check with your network service provider for details of their service in order to configure the handset accordingly 1 Press G gt key for a long time in standby mode 2 You can check the following submenus e Home Menu 1 5 2 1 The number dialed on the home network to listen to voicemail Roam Menu 1 5 2 2 The number dialed when other networks to listen to voicemail Namecard Menu 1 6 It s for editing the namecard The items of the namecard are a name mobile office and memo e Edit You can edit a namecard e Delete You can delete a namecard Templates Menu 1 71 It s for editing pre defined messages You can see 11 pre defined messages in the list You can save 6 templates before you edit But you can change them The others are lt Empty gt e Edit You can edit a template Delete You can delete the template 39 Messages Menu 1 Accessing the Menu Settings Menu 1 8 Message type Menu 1 8
19. ancel all barring service Change passwd You can change the password for Call Barring Service 55 Settings Menu 4 Accessing the Menu Fixed dial num Menu 4 5 5 SIM dependent You can restrict your outgoing calls to selected phone number The numbers are protected by your PIN2 code 1 2 Press V2 Menu in standby mode Press amp key for direct access or use 7 and 4 zs to enter Settings Scroll to highlight Security settings menu 4 Select PIN code by pressing V2 Select 5 If the PIN 2 code is correct you can view the following submenus On You can restrict your outgoing calls to selected phone number Off You can call without restricting phone number e Number list You can view the number list saved as Fixed dial number Change code Menu 4 5 6 You can change the access codes PIN PIN2 and Security code 1 2 56 Press gt Menu in standby mode Press amp key for direct access or use 7 and 4 zs to enter Settings Scroll to highlight Security settings menu Select Change code by pressing V2 Select If you want to change the PIN PIN2 Security code input your original code and then press VO OK Input new PIN PIN2 Security code and verify them Accessing the Menu Network settings Menu 4 6 You can select the network which you will be registered either automatically or manually Usually the selection of the network used by th
20. bile office and memo You can add a namecard to the message Add dictionary If you add a word you use often you can input it by pressing a key once for each character 1 Enter the menu 2 Scroll to highlight Add dictionary and then press V2 Select 3 Input a word and then press V2 Add 32 Accessing the Menu How to Use T9 T9 allows you to input text quickly In T9 you only need to press the key with the corresponding letter once This is based on a built in dictionary to which you can also add nevv vvords Writing words by using T9 1 Start vvriting a vvord by using the keys to zz Press each key only once for one letter To write for instance Girl lt la gt For Aa For i Tull El LLLI Tal i LIT Tail ly n 1024 1 gt 1023 1 1022 1 Hil I For r For 1 Tall E i Tul BEI Hisl Girl I The word changes after each keystroke Therefore you shouldn t pay too much attention to how the word appears on the display until you have pressed all the appropriate keys To delete a character to the left press 9 To insert several numbers hold z down and key in the numbers If you hold lt gt down you can change the T9 languages In T9 mode you can also select T9 Off menu Default is T9 On 33 Messages Menu 1 Accessing the Menu Also the phone supports three modes Predictive T9Abc T9ABC T9abc Multitap ABC abc Nu
21. brate only Menu 3 1 c l Quiet Menu 3 2 e General Menu 3 3 e Loud Menu 3 4 eeem Ree Headset Menu 3 5 eee Settings Menu 4 emmm I 9 IMeele e Alarm clock Menu 4 1 5 Date amp Time Menu 4 2 Phone settings Menu 4 3 EE Call settings Menu 4 4 e Security settings Menu 4 5 e Network settings Menu 4 6 cit Restore factory settings Menu 4 7 2 Call Divert Menu 5 All voice calls Menu 5 1 EN e f busy Menu 5 2 e f no reply Menu 5 3 e f unreachable Menu 5 4 All data calls Menu 5 5 e All fax calls Menu 5 6 Cancel all Menu 5 7 6 Scheduler Menu 6 2 3 Add new Menu 6 1 e View day Menu 6 2 e View all Menu 6 3 E e Delete passed Menu 6 4 0 Delete all Menu 6 5 6 Fun amp Tools Menu 7 emm 62 e Game Menu 7 1 62 e Unit convert Menu 7 2
22. ct to enter 3 The names of the available services will be shown 4 Use and xs to select a service Press Q Send Check memory This feature allows you to see how many free Tul 8 Hb and in use are in your phonebook S M Card 9 1560 1 Open the phonebook first by pressing G Handset 0 200 Names in standby mode Select Information by pressing V gt Select Back 2 Scroll to Check memory then press V2 Select to enter this menu Own number SIM dependent You can check your own number in SIM card 28 Menu Tree Accessing the Menu 1 Messages 3 Profiles 1 Write message 1 Vibrate only 2 Inbox 2 Quiet 3 Outbox 3 General 4 Info service 4 Loud 5 Voice messages 5 Headset 6 Namecard 7 Templates 8 Settings 9 Check memory 77 4 Settings 1 Alarm clock 2 Date amp Time 3 Phone settings 2 Call Register 4 Call settings 1 Missed calls 5 Security settings 2 Received calls 6 Network settings 3 Dialled calls 7 Restore factory settings 4 Clear recent calls 5 Call charge 6 GPRS info 29 Menu Tree 5 Call Divert 1 All voice calls 2 f busy 3 f no reply 4 If unreachable 5 All data calls 6 All fax calls 7 Cancel all 1 Add new 2 View day 3 View all 4 Delete passed 5 Delete all Accessing the Menu 7 Fun amp Tools 9 1 Game 2 Unit convert 3 Calculator 4 World time Internet 1 Home 2 Bookmarks 3 Profiles 4 Cache settings 5 Security
23. e book Accessing the Menu Search Names 1 Calling from phonebook 1 Open the phonebook first by pressing Names in a standby mode 2 Search by Pressing V2 Select to enter 3 Depending on setting Search by the below menu may not N G b 22 appear e Name e Number You can find an entry by name and number Select V2 Search You can check the names and numbers by pressing V2 List f you want to edit delete copy an entry or to add the voice to one select V2 Options The below menu will be displayed e Edit You can edit the name number E mail and fax by pressing V2 OK Delete You can delete an entry e Copy You can copy a entry from SIM to phone or from phone to SIM Call You can call thru the chosen entry e Voice You can add the voice to the entry or change the voice tag Main number You can select the one out of mobile home office that you often use The main number will be displayed first if you set this Accessing the Menu Add new Names 2 You can add phonebook entry by using this function Phone memory capacity is 200 entries SIM card memory capacity depends on the service provider You can also save 20 characters of name in the Phone memory and you can save characters in the SIM card The number of character is SIM dependent feature 1 Open the phonebook first by pressing lt Names in standby mode 2 Scroll to highligh
24. e handset is automatic Automatic Menu 4 6 1 The phone automatically selects network which is available in the your area Manual Menu 4 6 2 The phone will find the list of available networks and show you them Then you can select the network which you want to use if this network has a roaming agreement with your home network operator Preferred Menu 4 6 3 You can set a list of preferred networks the handset should attempt to register with first before attempting to register to any other networks This list is created from the handset s predefined list of known networks User define Menu 4 6 4 You can add entries or delete new ones from the network list This can even include new networks whose network codes are not known to the handset To do this select and then enter the network code country code and network name Restore factory settings Menu 4 7 You can set the handset to the default configuration by selecting the Settings Restore factory settings option and then confirming this selection 57 Call Divert Menu 5 network and subscription dependent Accessing Uie Menu The Call divert service allows to divert incoming voice calls fax calls and data calls to another number For details contact your service provider 1 Press V2 Menu in standby mode 2 Press for direct access or use 7 and 4 to enter Call Divert All voice calls Menu 5 1 Diverts voice calls unconditionally If
25. ed numbers You can call by this number save it or view date and time in this menu Clear recent calls Menu 2 4 You can delete all call records 1 Press gt Menu in standby mode 2 Press for direct access or use 7 and ze to enter Call register 3 Scroll to highlight Clear recent calls and press V2 Select to enter 4 The following four submenus Missed calls Received calls Dialled calls All calls 5 Delete all message will be displayed and then press V2 Select then press one more time V2 Yes to confirm 41 Call Register Menu 2 Accessing the Menu Call charge Menu 2 5 Within these submenus you can view the duration and the call cost Call duration Menu 2 5 1 This function allows you to view the duration of your Last Call All Calls Incoming Calls and Outgoing Calls in hours minutes and seconds You can also reset the call timers 1 Press VO Menu in standby mode 2 Press for direct access or use 7 and 4 to enter Call register 3 Scroll to highlight Call duration and press V2 Select The following 5 submenus Last call All calls Received calls Dialled calls and Reset all Show call costs Menu 2 5 2 This function allows you to check the cost of your last call all calls remaining and reset the costs To reset the cost you need the PIN2 code 1 Press VO Menu in standby mode 2 Press for direct access or use 7 and ze to enter Call register
26. emble this unit Take it to a qualified service technician when repair work is required Away from electrical appliance such as a TV radio or personal computer The unit should be situated from heat sources such as radiators or cookers Do not drop Do not subject this unit to mechanical vibration or shock The coating of the phone may be damaged if covered with wrap or vinyl wrapper Use dry cloth to clean the exterior of the unit Do not use solvent such as benzene thinner or alcohol Do not subject this unit to excessive smoke or dust Do not keep the phone next to credit cards or transport tickets it can be affect the information on the magnetic strips Do not tap the screen with a sharp object otherwise it may damage the phone Do not expose the phone to liquid or moisture Use the accessories like an earphone cautiously Do not touch the antenna unnecessarily Caring for the Battery You do not need to completely discharge the battery before recharging Unlike other battery systems there is no memory effect that could compromise the battery s performance Use only LG batteries and chargers LG chargers are designed to maximize the battery life Do not disassemble or short circuit the battery pack Keep the metal contacts of the battery pack clean Replace the battery when it no longer provides acceptable performance The battery pack may be recharged hundreds of times until it needs replacing Recha
27. ess or use 77 and x to enter Call register 3 Scroll to highlight Settings and press V2 Select to enter 4 Select Auto display 43 Call Register Menu 2 Accessing the Menu Note e When all units have been used no calls can be made except emergency calls Depending on SIM card you need the PIN2 code to set a call cost limit GPRS info Menu 2 6 You can check the amount of data transferred over the network through GPRS In addition you can also view how much time you are online Call duration You can check the duration of GPRS call You can also reset the call timers Last call All calls Reset all Data volume You can check the data volume e Sent e Received All Reset all 44 Profiles Menu 3 Accessing the Menu In this menu you can adjust and customize the phone tones for different events environments and caller s group e g When your phone is connected to the Handsfree kit it ll be automatically set to the Car profiles menu and when your phone is connected to the Earmic it ll be automatically set to Headset profiles menu 1 Press V2 Menu in standby mode 2 Press 2322 for direct access or use 7 and 4 to enter Profiles Q Note e n case that your phone is connected to accessories such as Earmic and Handsfree you cannot enable Profiles menu manually Profiles menu has Enable submenu except Headset and Car so that you can set Profiles
28. hone is set to alarm before 4 If you want to cancel press V2 Yes If not press No 48 Accessing the Menu Date amp Time Menu 4 2 Date Menu 4 2 1 Set date In this menu you can set the date of your phone 1 Enter the menu 2 Select Set date by pressing V2 Select 3 Enter the number you vvant to set the date 4 Press VO OK e Date format You can set the Date format in this menu Time Menu 4 2 21 The phone has its own clock In this menu you can set the time and select betvveen the 12 hour or 24 hour time formats 1 Enter the menu 2 Scroll to highlight Time by pressing VO Select e Set time You can set time of your phone in this menu 1 Select Set time by pressing V gt Select 2 Enter the number you vvant to set the time 3 Select the am pm you vvant to set the time format by long pressing 7 L key You can also change the am pm by using key 4 Press V2 OK e Time format Your can select time format betvveen 12 hour or 24 hour 1 Scroll to highlight Time format by pressing V2 Select 2 Select 12 hour or 24 hour you want by pressing V2 Select 49 Settings Menu 4 Accessing the Menu Phone settings Menu 4 3 You can set the phone setting you want Scroll to highlight Phone settings menu and then press V2 Select Display Menu 4 3 1 Screen saver Menu 4 3 1 1 If you don t activate any function for 20 seconds the picture will be
29. ht times O Note 1500 can access only Operators Home page website for viewing and information purpose only Home Menu 8 1 You can connect to the configured homepage of the activated profile Bookmarks Menu 8 2 When you enter this menu you can see the bookmarks Then press VO button to access available option or press amp 7 to exit it Connect Connect to selected bookmark Add new Add a new bookmark manually e Edit Edit the title and the address of the selected bookmark Delete Delete the selected bookmark from the bookmark list Profiles Menu 8 3 You can make up to 5 profiles and activate only one of them Scroll to the desired profile and press V2 to access available options Activate Menu 8 3 1 11 You can activate the selected profile e Settings Menu 8 3 1 2 You can edit and change WAP settings of the selected profile Homepage This setting allows you to enter the address URL of the site you want to use as homepage You do not need to type http in front of each URL as the WAP Browser will automatically add it 64 Accessing the Menu Display image You can select whether images on WAP cards are displayed or not Conn type The options for connection type are Continuous or Temporary and depend on the gateway Continuous A confirmed delivery mechanism but generates more network traffic Temporary A non confirmed connectionless service Secure setting The op
30. ive CB message you can read it following sequence Read Menu 1 4 1 1 When you receive CB message it will be displayed on the screen You can read the message by scrolling 7 gt 2 After reading the message press to return to the standby mode In addition you can save it until another message is reached Receive CB Menu 1 4 2 Yes If you select this menu your phone will receive the Cell Broadcast message No If you select this menu your phone will not receive the Cell Broadcast message any more Alert Menu 1 4 3 e Yes If you select this menu your phone will beep when Cell broadcast message is received e No If you select this menu your phone will not beep despite Cell broadcast message is received 37 Messages Menu 1 Accessing the Menu Language Menu 1 4 4 You can select the language you want Then your phone will receive the cell broadcast message in the language selected by you You can select Cell broadcast language pressing V2 Select The language list which you selected already will be displayed with check box Topics Menu 1 4 5 Dependent to network and subscription e Add Menu 1 4 5 1 If you select this menu you will add the CB message category in Phone memory e View list Menu 1 4 5 2 If you select this menu you can see CB message category If you press V2 Options you can edit and delete it Active list Menu 1 4 5 3 You can select the CB mess
31. layed caller of a multiparty call can be disconnected by pressing the End key To end a multiparty call press the V2 Options key then select Multiparty End multiparty Selecting the V2 Options key then Multiparty End all will end all the active and held calls 2 10 Explicit Call Transfer ECT If you have one caller on hold and another active call you may connect one call party to another call party and then leave the call This is done by selecting the Multiparty Transfer option from the in call menu 7A Accessories There are various accessories for your mobile phone You can select these options according to your personal communication requirements Standard Battery Portable Handsfree This connects to your phone allowing handsfree operation Travel Adapter This charger allows you to charge the battery while away from home or your office Cigar Lighter Adapter You can operate the phone and trickle charge the phone s battery from your vehicle by using the cigarette lighter charger Neckstrap Note e Information and specification in this menu is subject to change without prior notice Accessories may be different in different regions please check with our regional service company or agent for further enquiries 75 Care and Maintenance When using this unit basic safety precautions as below should be always followed 76 Do not touch the adapter with wet hands Do not disass
32. ll is automatically put on hold You can swap between calls by selecting the V2 Options key then Swap 2 2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the V2 Options key then Multiparty Join all 2 3 Putting the Multiparty Call on Hold To put a multiparty call on hold select the V2 Options key then Multiparty Hold all 2 4 Activate the Multiparty Call on Hold To make a multiparty call on hold active select the VO Options key then Multiparty Join all 73 F In call Menu Additional Functions 2 5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call select the gt Options key then Multiparty Join all 2 6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen press 7 and 4 keys 2 7 Putting a Member of a Multiparty Call on Hold To place one selected caller whose number is currently displayed on screen of a multiparty call on hold select the gt Options key then Multiparty Exclude 2 8 A Private Call in a Multiparty Call To have a private call vvith one caller of a multiparty call display the number of the caller you wish to talk to on the screen then select the V2 Options key and Multiparty Private to put all the other callers on hold 2 9 Ending a Multiparty Call The currently disp
33. menu at any time except above case Vibrate only Menu 3 1 Enable You can adjust the Profiles as Vibrate only if you need vibration mode Quiet Menu 3 2 e Enable You can adjust the Profiles as Quiet if you are in Silent place e Change You can change the values of Profiles submenus General Menu 3 3 Enable You can adjust the Profiles as General e Change You can change the values of Profiles submenus 45 Profiles Menu 3 Accessing the Menu Loud Menu 3 4 e Enable You can adjust the Profiles as Loud if you are in a noisy environment e Change You can change the values of Profiles submenus Headset Menu 3 5 e Change You can change the values of Profiles submenus A Group of Profiles submenus Menu 3 x x Profiles menu have the submenus as shown below Incoming alert type Menu 3 x 1 Allows to set alert type for the incoming call for adjusting environment Ringing tone Menu 3 x 2 Allows to set the ringing tone for adjusting environment Ringing volume Menu 3 x 3 Allows to set the ringing volume for adjusting environment Message alert Menu 3 x 4 Allows to alert when receiving a message for adjusting environment Beep Vibrator and No alert Key volume Menu 3 x 5 Allows to set the keypad volume for adjusting environment 46 Accessing the Menu Automatic answer Menu 3 x 6 Allows to set to answer automatically for adjusting environment Please
34. meric 123 If you want to change a mode press lt gt key Alternatively Press gt key and select insert symbols Select the desired character and press Select When you have finished wirting a word check whether the word is correct e f the word is correct Press and write the next word If the word is not correct Search by lt 7 4 Previous and Next word Alternatively If there is no word you want you can add your own word Press gt Options in the Predictive edit mode Select Add T9 dictionary Menu You can see the following Tull f Tull E Word Input your Word word LGGSM I Save Symbol Save Symbol 3 To insert a punctuation mark press 4 2 repeatedly until the desired mark appears ro languages e You can select T9 Languages by selecting Menu In T9 mode you can also select T9 Off menu Default is T9 On 34 Accessing the Menu inbox Menu 1 2 When you receive a text message your phone shows the symbol and stores it in the incoming message lists Scroll to the desired message by using 7 In addition you can see Delete all for deleting all incoming messages at the bottom of the list VVhile reading the message press V2 Options to access the available options Delete The selected message is deleted Edit You can edit an incoming message and send or save the edited message Forvvard You can forward the selected message to the other party
35. n the call mode Settings Call Setting Next Incoming sub menu To receive a data or fax call 1 Press gt Menu in standby mode 2 Select the Settings Call setting o Next Incoming 3 Select the call type you want Voice Data or Fax and press gt Select 4 Connect your computer to the phone 5 After starting the communicate software accept a call and receive a data or fax if it is not answered automatically 6 After the data or fax reception you can end the call by just ending of the communicate software pressing gt End Once you have set your phone for a specific incoming call it remains set until you change it 70 In call Menu Additional Functions During a call the following menus will be displayed not in a standby mode 1 During a call 1 1 Putting a Call on Hold You can place a call on hold or retrieve by just pressing the Q Send key When a call is made or answered press the Send key to place it on hold When a call is held press the Q Send key to make it active 1 2 Making a Second Call You can get a dial number from phonebook to make a second call Press amp 7 Names key then select Search To save the dial number into phonebook during call press lt Names key then select Add Entry 1 3 Swapping Between Two Calls To switch between two calls select the gt Options key then select Swap or just press Q Send key You can make one of two calls f
36. ocused by pressing up down arrow key If you want to end one of two calls make the call you want to end focused then press End key when the call you want to end is focused 1 4 Answering an Incoming Call To answer an incoming call simply press the S Send key The handset is also able to warn you of an incoming call while you are already in a call A tone sounds in the earpiece and the display will show that a second call is waiting If Call Waiting is on you can put the first call on hold and answer the second by pressing Send or by selecting the V2 Menu key then Hold amp Answer You can end the current call and answer the waiting call by selecting the V Menu key then End amp Answer T1 In call Menu Additional Functions 1 5 Rejecting an Incoming Call You can reject an incoming call without answering by simply pressing the gt End key When in a call you can reject an incoming call by pressing the gt Menu key and selecting Multiparty Reject or by pressing End key 1 6 Controlling the volume during a call You can control the volume during a call by pressing V2 Options key and selecting Volume 1 7 Muting the Microphone You can mute the microphone during a call by pressing the gt Options key then selecting Mute The handset can be unmuted by pressing the gt Unmute When the handset is muted the caller cannot hear you but you can still hear them 1 8 Switching DTMF Tones
37. on During a Call To turn DTMF tones on during a call for example to allow your handset to make use of an automated switchboard select the V2 Options key then DTMF On DTMF tones can be turned off the same way 1 9 Calling up the Main Menu The Messages and SIM Tool kit main menu options can be reached from the in call menu by selecting the V2 Options key then Main Menu SIM Tool kit menu is shown only when SIM in the handset supports SIM Tool kit service 75 Additional Functions 2 Multiparty or Conference Calls The multiparty or conference service provides you with the ability to have a simultaneous conversation with more than one caller if your network service provider supports this feature A multiparty call can only be set up when you have one active call and one call on hold both calls having been answered Once a multiparty call is set up calls may be added disconnected or separated that is removed from the multiparty call but still connected to you by the person who set up the multiparty call These options are all available from the in call menu and are listed in Section The maximum callers in a multiparty call is five Once started you are in control of the multiparty call and only you can add calls to the multiparty call 2 1 Making a Second Call You can make a second call while you are already in a call To do this enter the second number and press Send When you get second call the first ca
38. pen the phonebook first by pressing lt Names in a standby mode 2 Scroll to Speed dial then press V2 Select to enter this menu 3 Every Speed dial will be displayed 4 If you want to add Speed dial select ls Empty Then you can search the name in phonebook 5 If you select allocated name by speed dial you can view following the submenus Change You can change the allocation of speed dial number e Undo speed dial You can delete the allocated speed dial number 24 Accessing the Menu Voice list Names 4 You can see all phone numbers which contain voice You can also call directly by pressing Q Send After selecting phone number by using lt and 4 and press V2 Options you can see following the submenus Play You can play voice which is attached to phone number e Change You can change voice which is attached to phone number Delete You can delete voice which is attached to phone number Call You can call by selecting this menu Caller groups Names 5 You can list up to 20 members per one group There are 7 groups you can make lists to 1 Press Names to enter into the phonebook in standby mode 2 Scroll to Caller groups then press V2 Select to enter this menu 3 Every Group list will be displayed Family Friend Colleague VIP etc 4 Select Group name that you want to manage by pressing V2 Select 5 Then submenus below will be displayed
39. press V2 Select View day Menu 6 2 Shows the note for the chosen day Use 7 L to browse through the note lists If you set alarm for the note Alarm watch is displayed Press V2 Options to delete edit the note you selected View all Menu 6 3 Shows the notes that are set for all days Use 7 L to browse through the note lists Pressing gt Options allows access to the same menu as in View day Delete passed Menu 6 4 You can delete for the last schedule already notified you Delete all Menu 6 5 You can delete for the all note s 61 Fun amp Tools Menu 7 Accessing the Menu Game Menu 7 1 Your phone offers you enjoyable games to play with 0 Note The Control keys are different for each game But each game has screens to explain the main control key Other common control keys are below Common Key Function NO Soft 1 Key Start Game 29 CLR Exit CJ Soft 2 Key Exit END Exit lt Star Key Backlight off on Soft 1 Key Save score 2500070 gt Level control Up Down numeric key Unit convert Menu 7 2 This converts any measurement into a unit Tatli 5 m you want There are 4 types that can be e i e converted into units Length Area Weight 35 and Volume 0 000 cm 1 You can select one of four unit types by Change Back pressing V gt Select key 2 Select the unit you want to convert by pressing
40. re displayed e Voice You can receive the voice call e Data You can recelve the data call e Fax You can receive the fax call Q Note e Single numbering service means that the number of fax or data service is identical vvith the number of voice service And these modes depend on netvvork feature Select line Menu 4 4 71 netvvork dependent This function is only used if Alternate line service supported by the Service Provider Tvvo independent phone numbers are registered for the phone This function provides you vvith the selection the currently used phone number If this function is supported by your service provider the following menu will be displayed 1 Line 1 Select Line 1 as the current phone number 2 Line 2 Select Line 2 as the current phone number 53 L Settings Menu 4 Accessing the Menu Security settings Menu 4 5 PIN code Menu 4 5 1 In this menu you can set the phone to ask for the PIN code of your SIM card when the pone is switched on If this function is activated you ll be requested to enter the PIN code 1 Press VO Menu in standby mode 2 Press amp key for direct access or use 77 and 4 to enter Settings 3 Scroll to highlight Security settings menu 4 Select PIN code by pressing V2 Select 5 You can view the following submenus Enable Enable PIN code request e Disable Disable PIN code request Phone lock Menu 4 5 2 You can use security code to avoid
41. rge the battery if it has not been used for a long time to maximize usability Do not expose the battery charger to direct sunlight or use it in high humidity such as the bathroom Do not leave the battery in hot or cold places this may deteriorate the battery performance 77 Technical Data General Product Name G1500 System GSM 900 DCS 1800 Ambient Temperatures Max 55 C Min 10 C 78 2310 080 LET y222 899 02 164 l L og 9BuonAy Ajo BueAuy SpUEH U3 N eu n9 ueBuog 2701 48 pies ulq lu 1oudiu S YN 611 9 ueejiuoude UOISIAIG INS Sul 521040119913 97 921JO YIULIG WEPIIJSUIV 971 uo r Huor IP IN wry Boas uif IN s uosJed 1oejuoo y ejqejreAe JI QAIJOOJIP eui JO s pe peuonuauJ 0 0 0 AOQE y YIM saei duioo seje oJ uoneJge oep 511 U9IUM O AOQE PSUONUSU jonpoud eui JEU Ay iqisuodsai ejos JNO eJe oep qaJay An ls q ALLY v Jo Z 9ejonay unajoeds ope y JO sn ju9l21J3 t 9 28J1q 411394 94 Jo q p e epnay Ajiiqneduoo neuBeuio29 3 9 28J1q 3 LL9 3 v JO BLE ejonav Ajejes Z 411994 94 JO E L E ena YEOH esn S 104 pesn H 23 8 6661 ALLEY 24 Jo AY sjueuieumboi jenuesse ay s lldulo japow 5141 s9 uon 2993 51 79 Memo
42. rovider for the code If you lose the code also contact your service provider PUK2 code 4 to 8 digits The PUK2 code supplied with some SIM cards is required to change a blocked PIN2 code If you lose the code also contact your service provider Security code 4 to 8 digits The security code protects the unauthorized use of your phone It is usually supplied with the phone This code is required to delete all phone entries and to activate Restore factory settings menu The default number of Security code is 0000 You can also change it in Security menu 20 Phone book o Add new Speed dial Voice list Caller groups Copy all Delete all Accessing the Menu To select a menu in phonebook press Names in standby mode and then scroll to a desired item Description Allows you to search for a specific name number Allows you to add new names and numbers Allows you to assign up to 8 A gt ID one touch dial allocations Allovvs you to list phone numbers vvhich is attached voice Allows you to show group list Allows you to copy entries from your Phone memory to SIM card or from SIM card to Phone memory Allows you to erase all the data in either your phonebook or the SIM card to the phone memory Allows you to set the memory and to search item by variable name and number Allows you to check the status of memory SDN Service Dial Number and Own number 21 Phon
43. rtable earphone please press the button for a long time after inserting it to the connector when incoming a call 51 Settings Menu 4 Accessing the Menu Send number Menu 4 4 3 network and subscription dependent e Yes Menu 4 4 3 1 If you select this you can send your phone number to the other party That is your phone number will be displayed on receiver s phone No Menu 4 4 3 2 If you select this you can t send your phone number Default Menu 4 4 3 3 If you select this menu this phone will be set to the default value Call waiting Menu 4 4 4 network dependent If this service is available you can accept a waiting incoming call e Enable Menu 4 4 4 1 Activating the corresponding service Disable Menu 4 4 4 2 Deactivating the corresponding service Check status Menu 4 4 4 3 Checking the Status of the service Auto redial Menu 4 4 5 e Yes Menu 4 4 5 1 When this function is set on your phone will make up to 10 attempts for a call after not connecting No Menu 4 4 5 2 Your phone will not make any attempts to connect the call after not connecting BD Accessing the Menu Next incoming Menu 4 4 6 network dependent In case of Single Numbering Service you can use the phone and a connected PC to send and receive fax data and voice If you select the mode you can receive data fax or voice each mode Once you enter this menu you following options a
44. software such as a data or a fax program Before using these functions you need to connect your phone to a computer or make sure that your phone is in connection vvith a compatible device Sending Data or Fax Calls 1 Connect your computer to the phone 2 After starting the communicate software make a call and transmit a data or fax 3 After the data or fax transmission you can end the call by just ending of the communicate software pressing End Receiving Data or Fax Calls If you have separate numbers for voice data and fax calls your phone recognizes the type of call Receiving Data or Fax Calls Separate numbers Multi numbers To use a data or a fax service the display shows which type of call you are recelving To receive a data or fax call 1 Connect your computer to the phone 2 After starting the communicate softvvare accept a call and receive a data or fax if it is not ansvvered automatically 3 After the data or fax reception you can end the call by just ending of the communicate software pressing End 69 How to Use Data and Fax call Additional Functions Receiving Data or Fax Calls Single number If you have a SIM card that does not support separate voice data and fax numbers the phone does not recognize the type of incoming call To use a data or a fax service make sure that you want to receive a data or fax call mode You first have to set the phone to one of these options i
45. t Add new and press V2 Select to enter 3 Select the memory you want to save SIM or Phone SIM You can add name and number for entry a Write a name to add b Press V2 OK then you can input a number c Press gt OK d If you want to add the voice press V2 Yes e Phone You can add name mobile home office fax no and E mail address a Write a name to add b Press V2 OK c Enter the numbers following as mobile home office and fax by pressing gt OK Also you can input E mail address d If you want to add the voice press V2 Yes You should speak a word within 2 seconds and the phone asks you to speak it again to ensure the accuracy of voice recognition After voice recognition has finished Voice is attached automatically 23 Phone book Accessing the Menu Q Note e The voice can only be attached to main number which you set For example if you change main number voice will be automatically attached changed number You can add voice tag to phone number in SIM card The voice tag can be erased removing or changing SIM card And voice tag attached to phone number in SIM card may be attached to another phone number when you changed SIM card Why The answer is that SIM card doesn t contain information about voice tag Speed dial Names 3 You can associate any of the keys to lt gt with a Name list entry You can call directly by pressing this key for 2 3 seconds 1 O
46. tery Lock Ear Microphone Connector Key Description Overview The following shows key components of the phone Keypad Description Key Description Soft Left Key Soft Right Key CJ Each of these keys performs the function indicated by the text on the display immediately above it WAP Hotkey Used to connect to WAP directly by pressing this key R Used to delete character s id Navigation Keys Used to scroll through name phone numbers menus or setting options l wa Used to enter Message menu directly C Used to scroll through names phone numbers Send Key You can dial a phone number and answer a call If you press this key without entering a number your phone shows the most recently dialed number Numeric Keys These keys are used mainly to dial in standby mode and enter numbers or characters in editing mode When you press these keys for a long time c e Used to call your voicemail box by lt gt Used to call for international call by ez e Used to call Speed dials by from to F gt Used to enter the vibration mode by pressing this key for a long time Used to call by voice dial vvith long pressing this key o This key is also used as Ear mic hook key when connecting Far mic 2 Overview Key Description END PWR Key Used to end or reject a call This key is also used as Power Key Pressing and holding this key for a few seconds Alphanumeric Keys The alphabet and n
47. tings Names 8 You can set preferred memory which includes Variable SIM or Phone and preferred search which includes Variable Name and Number 1 Open the phonebook first by pressing lt Names in a standby mode 2 Scroll to Settings then Press V2 Select to enter Then submenus below will be displayed e Set memory 1 Scroll to highlight Set memory then press V2 Select to enter 2 The three submenus are displayed Variable If you select Variable the phone asks you where to store whenever you add entries in Phonebook SIM If you select SIM the phone stores entries to SIM directly without asking you where to store Phone If you select Phone the phone stores entries to Phone directly without asking you where to store 27 Phone book Accessing the Menu Search by 1 Scroll to highlight Search by then press V2 Select to enter 2 The three submenus are displayed Variable If you select Variable the phone asks you how to search the entries Name Ifyou select Name the phone searches entries by name Number If you select Number the phone searches entries by number Information Names 9 SDN Service Dial Number Use this function to access a particular list of services provided by your network operator if supported by the SIM card 1 Open the phonebook first by pressing lt Names in a standby mode 2 Scroll to SDN then Press gt Sele
48. tions are On and Off depend on the gateway you are using Gateway info Most of WAP gatevvays do not require a User ID and Password If your gateway need them to connect to it then your network should provide them and you must set them up correctly before trying to browse a WAP site Bearer Data GPRS Data setting These values of setting are provided by your network IP address Enter the IP address of the WAP gateway you are using to access Dial number Enter the telephone number to dial to access your VVAP gatevvay Call type Select the type of data call Analogue or ISDN Digital 65 M Internet Menu 8 Accessing the Menu Call speed The speed of your data connection User ID The user identity for your dial up server and NOT the WAP gateway Password The password required by your dial up server and NOT the WAP gateway to identify you GPRS settings The service settings are only available when GPRS is chosen as a bearer service IP address Input the IP address of the WAP gateway you access APN Input the APN of the GPRS User ID The users identify for your APN server Password The password required by your APN server Linger time You need to select one of 5 timeout periods After selecting one of them the service will be unavailable if any data wasn t input or transferred e Rename Menu 8 3 1 3 Edit the Profile Name Email server Menu 8 3 1 4 Save the URL of
49. umerical keypad mapping relation are listed as the follovving table Key Description lt 3 0151 ABC2AAAAAA EE abca ada d T DEF3EEEEdef eee GHI4iliiGghiiiiig JKL5jkl gt MNO6N O Cd mnof c PQRS7BSpqrsBs TUVS tuv ID WXYZ9wxyz Space Key 0 Display Information Display Information The screen displays several icons the following describe each of them you may see on the phone On Screen Icons Tall Tells you the strength of the network signal Call is connected The alarm has been set and is on Tells you the status of the battery You have received a text message You have received a voice message depending on your subscription You have received an E mail fe n S I You can view your schedule All audible signals are turned off pz DE General menu in profiles Loud menu in profiles Quiet menu in profiles You can use GPRS service Headset menu in profiles You can divert a call ihe e 14 Display Information Top Menu Icons Icon Description Mer Messages Call Register Profiles Settings Call Divert Scheduler Fun amp Tools Internet Sim service Installation Getting Started Inserting the SIM Card Locate the SIM card socket in the back of the phone Follow the steps below to install the SIM card 1 Remove the battery if attached 2 Slide the SIM card into the slot
50. under the silvery holders with the golden connectors facing down and the cut corner to the right Q Notice Before installing always make sure that the phone is switched off and remove the battery e The metal contact of the SIM card can be easily damaged by scratches Pay special attention to the SIM card when you handle and install Follow the instructions supplied with the SIM card Installing the Batter 1 Place the battery on the back of the phone 16 Getting Started 2 Push it until you hear a click Charging the Battery To connect the travel adapter to the phone you must have installed the battery 1 Insert one end of the travel adapter into the bottom of the phone 2 Connect the other end of the travel adapter to an AC wall outlet Use only the included packing charger Q Warning e Do not force the connector as this may damage the phone and or the travel adapter 17 Installation Getting Started O Disconnecting the charger Disconnect the travel adapter from the phone by pressing its side buttons Q Notice e The battery delivered with your phone has to be fully charged before using it Do not remove your battery or the SIM card while charging e Charging is displayed on the screen after connecting the travel adapter Only if the battery is totally empty Back light is on without displaying Charging e The moving bars of battery icon
Download Pdf Manuals
Related Search