Home

Kompernass KH 6510 Operating Instructions

1. e Connect the yellow plug of the Audio Video cinch cable to the television s yellow video socket e Insert the white plug of the Audio Video cinch cable into the cinch socket inscribed L on the rear panel of the DVD player e Then insert the white plug at the other end of the Audio Video cinch cable into the left channel audio socket on the television e Insert the red Audio Video cinch cable plug into the cinch socket inscribed R on the rear panel of the DVD player e Then insert the red plug at the other end of the Audio Video cinch cable into the right channel audio socket on the television e For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel e Inthe OSD menu select the menu Video Video output RGB On this topic see also capital 8 3 Video settings Video output 6 4 Connection via component signal YPbPr Progressive Scan und YUV This connection variant is only possible with very high grade televisions LCD Plasma screens or Video projectors Check with the instruction manual of the corresponding play back device to see if this connections variant is available It is possible that additional playback device settings must be im plemented The so called Component signal is put out via the YPbPr socket of the DVD player The Component signal is also av
2. DVD player functions with the remote control 5 3 Replacing the batteries If the operation of the DVD player via the remote control does not function properly or does not function at all the batteries must be replaced e Always renew all batteries in order to return the remote control to its full performance ability NOTE Used batteries may not be disposed of in household waste Hand in used batteries at a collection location or disposal site or return them to the place where you bought them Should you yourself at some time dispose of the DVD player s remote control then you should beforehand without fail remove the batteries A Danger e Do not throw batteries into a fire e Do not recharge batteries unless of course they are specifically designated as rechargable e Never open solder or weld batteries The risk of explosions and injuries exist zn Zu KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 6 eb CE KH 6510 6511 6 Connecting the DVD player to a Television After setting up the DVD player you can now connect it to a television The DVD player can be connected to a television that operates with the PAL NTSC and SECAM standards If you want to use the DVD player on a television with e NTSC standard you will have to change the video setting in the DVD s so called OSD menu There PAL is set as the television standard at the factory SECAM standard you do not need to change any setti
3. If you attempt to execute a function that is not avai lable the symbol is displayed on the television screen None of the buttons on the device or on the remote control function other malfunctions A Switch the DVD player off by pressing the ON OFF button Wait ten seconds and then press the ON OFF button again to switch on the DVD player once more B Ifthe problem still persists Set the DVD player back to its default settings gt For this refer to chapter 8 6 Misc settings Contact one of our service partners in your area if gt the indicated malfunction cannot be resolved as described or gt something other than the indicated malfunction occurs gt For this refer to chapter 16 Important Warranty notes 15 Glossary Key Word Index What are DVDs VCDs and S VCDs DVDs DVD is short for Digital Versatile Disc DVDs are used to store audio and video data they exist in the sizes 8 cm and 12 cm diameter With a storage capacity many times greater than that of CD Rs CD RWs DVDs offer up to eight hours of playback time for the audio and video data they contain VCDs S VCDs With Video CD VCD and Super Video CD S VCD two compression processes thus space saving are designated for storage of films on CDs VCDs and S VCDs exist in the sizes 8 cm and 12 cm diameter Their storage capacity is lower than that of DVDs Therefore they offer only a playback duration for the Audio and Video sto
4. e the sockets inscribed with FR front right channel e the sockets inscribed with SL rear left channel e the sockets inscribed with SR rear right channel e the socket inscribed with CENTRE front centre channel and e the socket inscribed with SUBWOOFER Bass on the rear panel of the DVD player e insert the cinch cables into the corresponding analogue inputs in the digital audio component KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 10 S Cmm KH 6510 6511 8 Necessary settings to the DVD player before operation All possible settings on the DVD player can be administered with the remote control via the so called OnScreen display menu in short OSD Menu The OSD Menu will be super imposed on the television screen a Video DVD xubtitie Audio s Audio DivX subtitle DivX Sub Poxition Rating Misc Before you use the DVD player for the first time for playback of DVDs VCDs S VCDs or Audio MP3 CDs you must imple ment a few settings via the OSD Menu These settings are dependent amongst others on e the language in which you want the OSD Menu to be displayed e which TV standard corresponds to the television to which you want to connect the DVD player e Which image format your television can display In order to implement the necessary settings via the OSD Menu e First insert the connecter plug of the DVD player s power cord into a power socket e To turn the DVD play
5. loud speakers to the left and to the right of the television on which you connected the DVD player If you connected the DVD player to the television via a Scart cable the Audio signal will be transmitted via the cinch cable to your HiFi system as well as via the Scart cable to the television In this case set the volume of the television to the lowest level 7 2 Connecting digital audio components via digital cables In order to enjoy Surround Sound during playback of corres pondingly equiped DVDs recognisable by the Dolby Digital or DTS Logo you can connect the DVD player to digital Audio components for example a Dolby Digital or DTS Receiver or a suitable Surround system you can purchase the necessary cables for the hereafter described connection variants from your dealer Firstly check with the digital components instruction manual to see if it allows for connection to the DVD player e via a coaxial cable e or via an optical cable Connection via coaxial cable In order to connect the DVD player to a digital audio component with a digital coaxial cable e Connect the COAXIAL inscribed plug to the corresponding socket on the digital audio component O ae O OO xConnecting via optical cable In order to connect the DVD player to a digital audio component with an optical cable e Remove the protecti
6. are transmitted DA S video When the DVD player is connected to a television via S video the brightness and colour signals are separated this achieves better image sharpness and less colour noise Colour noise refers to the overlaying of the colourful usually highly saturated parts of a video image with irregular varia ble flaw patterns Composite video Video signal or FBAS signal this refers to a video signal that contains both colour and brightness information Progressive scan Normally TV sets and Video projectors with so called Half images are controlled This results in clearly visible line struc tures In contrast progressive scan refers to the supply of full images with this DVD player at the YPbPr output progressi ve scan signals can only be processed by playback devices pri marily large screen televisions projectors that offer this feature The image quality is significantly better than typical video signals YUV component video out YUV refers to the component signal which is available with this device at the YPbPR output in the form of half images as a rule this is the best signal for the control of large screen televisions and projectors which can not process Progressive scan signals As with RGB video signals the YUV consists of three separate video signals e the brightness signal Y and e both colour difference signals Pb Cb and Pr Cr Half images interlacing full images pro
7. high quality CDs which have been recor ded with NERO can contain chapters and sub titles in two languages The CDs are operated via the normal buttons that are used for DVDs Data which are not created with the NERO Digital Standard Profile may not play immediately or only with restrictions DivX DivX is a coding format for videos and multi medial data invented by DivX Networks Inc MPEG MPEG Moving Picture Experts Group refers to a Video compression format USB memory sticks The term USB memory stick refers to a plugable USB device which is approximately the size of a cigarette lighter The ex pression is only colloquial and not a designation for a type of product For the most part with this expression is meant a USB device that serves as an interchangeable storage media What are folders As opposed to Audio CDs the title on a CD R CD RW with MP3 WMA or JPEG data can be saved in folders for example to file titles from various genres For instance the structure of an MP3 CD may appear as shown below if the MP3 files were saved in folders A L_ an 16 Important warranty notes This appliance entitles you to a warranty of 3 years from the date of purchase Should you have cause for complaint with this appliance despite our high quality standards please con tact our Service hotline If a telephone resolution of your complaint is not possible you will receive from them e a processi
8. lt P AV To switch off the zoom function and return to the normal image size you press the Zoom button once more Off will appear on the TV screen Change the camera perspective Angle This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen Many films on DVD VCD S VCD contain chapters which were recorded simultaneously from various camera perspectives Films that have such chapters available allow you to observe the same chapter from various perspectives For this during the playback of the inserted DVD VCD S VCD you press the amp Angle button on the remote control With each press of the Angle button you will be switched to one of the available camera perspectives Subtitle superimpose Hide NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen If the film on the inserted DVD VCD S VCD has subtitles avai lable then you can superimpose them onto the television screen during playback by pressing the Subtitle button on the remote control With the first press of the Subtitle button the subtitles of the first available language are superimposed on the tele vision screen With each further press of the Subtitle button subtitles in other available languages one afte
9. reduce playback volume The volume variance between the values 0 Sound off and 16 Maximum volume will be superimposed on the television screen Dimmer Press the button Dimmer on the remote control to reduce or increase the brightness of the DVD player s display On the display appears Hi bright NOr normal Lo Dark or the display switches off Mute playback sound Mute To mute the playback sound press the X button Mute on the remote control during playback of DVDs VCDs S VCDs Audio CDs and CD Rs CD RWs with MP3 or WMA data The X symbol will be displayed on the television screen When you want to switch on the playback sound again press the X button Mute once more KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 21 S CMRR KH 6510 6511 Switch off the DVD player To switch off the DVD player e Ifa disc inserted into the DVD player is playing you must first stop the playback by pressing the W Stop button twice on the front panel of the DVD player or on the re mote control e Open the disc tray to remove a currently inserted disc from the DVD player by pressing the amp Open Close button on the front panel of the DVD player or on the remote control After this close the disc tray again by pressing the amp Open Close button e Press the button Standby on the remote control The DVD player now switches to the Standby mode To switch the DVD player on again press the butto
10. s disc tray The message No disc apears on the TV screen e Open the memory card slot flap on the front panel of the DVD player To do this press your finger on the mottled triangle on the flap The flap opens e Now slide the memory card into one of the memory card slots Then proceed with the following steps depending on the type of memory card that you want the device to read A Warning Always be sure to insert the memory cards into the memory card slots as described below Never bend the memory cards while inserting them into the memory cards slots With gentle pressure slide the memory card into the memory card slot as far as it will go Allow the memory card to slide in without force e Check to make sure that the memory card is one that the DVD player is capable of reading Do not attempt to insert memory cards of a different type into one of the memory card slots e Make sure that you have inserted the memory card into the memory card slot in the correct manner e Under no circumstances attemt to force the memory card into the memory card slot Otherwise the DVD player memory card and the data on the memory card could be damaged Supported memory card types and capacities Memory cards of the types CFI CFII 512 MB SD 512 MB MS MSPro 128 MB MMC 128 MB and SM 128 MB can be read Supported file structure and file formats 2 file levels are supported The total file count should be not more than 10 m
11. window to display the selected files only e To delete individual files from the programme list tag the file with the OK button The file will be marked with a tick e Then select Delete Program The tagged files will be de leted from the programme list e Select the settings window Browser view to display the complete file list once more CETE E 4 Edit Mode T MPEGA T OKTOBERFEST Program view Add to program T ROCK 8WING8 7 wma m AUD 2A m AUD 28 WMA AUD aA WMA AUD OB Rotation JPEG images only By pressing the control buttons AV you can rotate JPEG images Enlargement Zoom JPEG images only Press the Zoom button to enlarge image details You can shunt the image details with the control buttons lt P AV View JPEG images only e Press the Title button during JPEG playback Up to 9 small format images will be displayed on the television screen e With the help of the control buttons lt P AV you can se lect an image By pressing the OK button the selected image will be displayed in large format e To turn to the next page press the button Skip and or 44 Skip Effects JPEG images only With the Effect function you can cross fade JPEG images with various effects e Press the amp Angle button during playback The type of cross fading will be displayed on the television screen Fade out image downwards fade out image upwards fade in the centre fade out
12. 510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 26 S KH 6510 6511 NTSC NTSC is short for National Television System Committee NTSC is a colour television standard that is used primarily in the USA and Japan SECAM SECAM is the abbreviation for the French syst me en couleur avec m moire SECAM is currently the typical and most common colour television standard in France and many Eastern European countries Audio CDs Audio CDs contain only audio data they are also available in the sizes 8 cm and 12 cm diameter The playback time for the audio data stored on CDs is 20 mi nutes 8 cm size or 74 minutes 12 cm size Audio data is stored on audio CDs in the CDA format MP3 MP3 refers to a method or format for compression of audio files developed by the Fraunhofer Institute In MP3 format compressed music is only a fraction of its original size whereby for example on CD Rs CD RWs far more music can be stored than on standard audio CDs on which audio data is stored in CDA format WMA WMA Windows Media Audio is a data format developed by Microsoft for Audio data JPEG JPEG Joint Photographics Expert Group refers to a widely used graphics format developed by the organisation of the same name with which colour and gray scale image data are compressed Nero Digital NERO is a dta compresion program which can compress all video formats to less than 20 of their original size while still maintaining a
13. 6177 email support uk kompernass com Komperna Service Ireland Tel 087 99 62 077 email support ie kompernass com www mysilvercrest de KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 28 lt KH 6510 6511 28
14. GB 6 6 2 Connecting to a television via S Video 6 6 3 Connecting to a television via video input composite video 7 6 4 Connection via component signal YPbPr Progressive Scan und YUV 7 6 5 Connection via VGA 8 7 Connecting audio components to the DVD player 8 7 1 Connecting a HiFi system 8 7 2 Connecting digital audio components via digital cables 9 7 3 Connecting digital audio components via analogue cables 9 8 Necessary settings to the DVD player before operation 10 8 1 Using the OSD Menu 10 8 2 Language Settings 10 8 3 Video settings 11 8 4 Audio settings 11 8 5 Rating settings 12 8 6 Misc settings 12 9 Initial operation of the DVD player 13 9 1 Inserting the DVD 13 9 2 Inserting memory cards USB memory sticks with MP3 WMA DivX JPEG data 13 9 3 Removal of Memory cards USB Memory sticks from the memory card slot 14 10 Playing back DVDs VCDs or S VCDs 15 10 1 Features during playback of a DVD VCD or S VCD 15 11 Playback of JPEG Photo CD WMA MP3 MPEG4 21 12 Cleaning of the DVD player 22 13 Disposal 22 14 Troubleshooting 23 15 Glossary Key Word Index 24 16 Important warranty notes 26 Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference Hand over the manual to whomsoever you might pass the device on to zu zu KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 4 S CEA KH 6510 6511 1 Technical data Power
15. KH6510_ 11 A4 V3_EN qxd 24 08 2006 12 24 Uhr Seite 1 Komperna GmbH Burgstrasse 21 D 44867 Bochum www kompernass com ID Nr KH6510 6511 07 06 V3 KH6510_ 11 A4 V3_EN qxd 24 08 2006 12 25 Uhr Seite 2 SilverCrest Divx DOVO Player 7 in 2 CardReader USB 2D Port DVD player KH 6510 KH 6511 Operating instructions KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 3 S The Silvercrest KH 6510 6511 DVD player contains copyright protection technology which protects it from process claims of certain US patents for example other intellectual property rights of the Macrovision corporation and other copyright owners Use of this copyright protection technology must be approved by the Macrovision corporation and is restricted exclusively to non commercial private home use any other use requires the express approval of Macrovision Corporation Reverse engineering and disassembling are expressly prohibited Manufactured under license from Dolby Laboratories Inc Dolby and the double D symbols are registered trademarks of Dolby Laboratories Inc Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved This device is protected by US patents 4 631 603 4 577 216 4 819 098 4 907 093 and 6 516 132 The license applies exclusively to private use The Silvercrest KH 6510 6511 DVD player is licensed as a DivX Certified Product KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 4 eb Operating co
16. Seite 22 CE KH 6510 6511 Repeat function e Select the repeat setting in the settings window By pres sing the OK button you can select between Individual All and Off with the Individual setting the current file will be repeated until another setting is implemented with the setting All all files in the current folder will be repeated the setting Off ends the repeat function Mode e Select the Mode setting in the settings window By pressing the OK button you can select between Normal Random and Intro with the setting Random the files will playback in random order with the Intro setting 10 seconds of the MP3 data will be played back at a time If you want to deactivate the Change Mode select the setting Normal Edit Mode In Edit Mode you can put together your own programme e Tag the setting Edit Mode by pressing the OK button 12 73 4 KIF_0036 JP9 JPG KIF 0020 JPG KIF 0023 m Zu rogram view JPG KIF 0094 FT Aaato program JIPO KIF 0036 JPG KIF 0097 JPG KIF 00an JPG KIF 0099 e Switch to the file window by pressing the control button lt Select the files that you want to incorporate into your programme by pressing the OK button A tick is displayed in front of the selected files e When you have tagged all the desired files select Add to program in the settings window The selected files are specially listed e Select program view in the settings
17. ai lable in the form of e so called YUV signal Half image as well as in the form of e so called YPbPr signal Full image Progressive Scan On this topic please refer to Section 15 Glossary KeyWord Index KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 7 S KH 6510 6511 NOTE For both variants the television to which you want to connect the DVD player must have two unoccupied Audio cinch sockets available The cable connections are the same in both cases YPbPr signal for Progressive Scan however can only be used if the television or Video projector to which you want to connect the DVD player is capable of Progressive Scan If you are not sure whether the television or Video projector to which you want to connect the DVD player is capable of Progressive Scan and has cinch sockets available then you can check this by consulting the television s or Video projec tors s instruction manual For both variations YPbPr and YUV you will need e an audio cinch cable not supplied e an YUV cable not supplied These can be obtained from your dealer On the rear panel of the DVD player you will find the three so called Component Colour Out sockets Y Pb Cb and Pr Cr In order to connect the DVD player via component signal jo a mm e Conn
18. and the rear Surround speakers Each increase in the distance setting cor responds to a delay of one millisecond With optimal settings the sound reaches your listening location at the same time from all directions Centre No delays 0 3 0 6 1 1 4 1 7 m Surround 1 2 3 4 0r 5 1m 11 cI KH 6510 6511 Digital Output Here you set the digital output signal of the DVD player OFF No digital audio component is connected a two channel digital audio com ponent is connected via coaxial cable or optical cable RAW a multi channel digital audio com ponent i e DTS receiver is connec ted via coaxial cable or optical cable Here you activate deactivate the night mode This setting allows for optimal sound playback with reduced volume The louder transmissions are suppressed and the quieter transmissions are played back a little louder This function is only possible when using a digital audio com ponent Here you set the Dolby ProLogic compati bility OFF No Dolby Prologic compatible audio component is connected to the ana logue stereo output L R ON A Dolby Prologic compatible audio component is connected to the ana logue stereo output L R of the DVD player PCM Night mode ProLogic 8 5 Rating settings In this Menu you can administer the settings for the child lock and change the password a as Parental control Language a Video Parental control Here you se
19. ax 5 files on each of the 2 file levels A max of 100 files are supported on the memory media Files with mixed file formats are not supported A JPEG file larger than 1 MB can lead to faulty images on the television screen 13 5 KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 14 CE KH 6510 6511 SmartMedia memory cards SM NOTE Only SmartMedia memory cards of type 3 3 V can be used SmartMedia memory cards of type 5 V cannot be used You can easily distinguish SmartMedia memory cards by means of the following diagram imi O Vol 128 MB You must insert the SmartMedia memory cards 3 3V into the upper memory card slot Insert the SM memory card into the upper memory card slot straight and with the contacts for ward Thereby the side of the memory card that the contacts are on must be facing upwards and the slanted corner of the memory card must be on the right side CompactFlash memory cards CF I CF II CompactFlash memory cards types 1 and 2 must be inserted into the lower memory card slot Insert CFmemory cards into the upper memory card slot with the contacts straight and forward The side of the memory card with the manufacturer s logo label must face up STE if CompactFlash Brand MultiMediaCard SecureDigital memory cards MMC SD MultiMediaCard SecureDigital memory cards must be inserted into the
20. dom function press the Mode button during playback and select the option Normal in the Playback Mode menu under the menu option Modes by pressing the OK button When you press the Mode button again the random function is switched off Repeated play With the function Repeated Play you can In respect to DVDs optionally repeat the title or chapter of the inserted DVD In respect to VCDs S VCDs individual titles and or the entire VCD S VCD repeatedly playback To switch off repeat play e Press the Mode button on the remote control during playback The Playback Mode menu will be superimposed on the television screen e Press the control button Y to select the menu option Repeat Play Mod Normal In respect to DVDs By pressing the OK button you select between the options Individual All and Off e Select Individual to repeat the currently playing chapter until repeat play is switched off or playback is stopped by pressing the W Stop button twice e Select All to repeat all chapters one after the other and also the entire film until repeat play is switched off or the playback is stopped by pressing the M Stop button twice For VCDs S VCDs By pressing the OK button you select between the options Off Individual and All e Select Individual to repeat the currently playing title of the VCD S VCD until repeat play is switched off or the play back is stopped by p
21. ds of the type CF I CF Il SD MS MSPro MMC und SM amp e for stationary operation in enclosed spaces e for private non commercial use You can connect to the Silvercrest KH 6510 KH 6511 DVD player for image outputs during playback of DVDs VCDs S VCDs Audio CDs and the MP3 data formats Windows Media Audio and JPEG e Stereo and Mono televisions with the formats PAL or NTSC and the picture formats 4 3 16 9 e LCD Plasma picture screens or video projectors if for this the corresponding connection potential is available and the connection of a DVD player is provided for allowed by the manufacturer of the playback device You can connect to the Silvercrest KH 6510 KH 6511 DVD player for sound output for example music e from the speaker of one of the televisions connected to the DVD player e from external audio components such as a HiFi system receiver or surround sound system analogue digital A IMPORTANT No liability warranty will be assumed for damage resulting from improper use of the device W Delivery Contents DVD player Infra red remote control 2 Batteries for remote control type AAA Micro cells RGB Scart cable Audio Video Cinch cable Nero Digital CD Instruction manual Demo DVD only in Germany Austria onau RBwmn Setting up of the DVD player Safety instructions 1 Carefully remove the DVD player and the supplied accessories from th
22. e packing Place the DVD player on an even straight and non slippery surface In order to avoid technical glitches damages and the risk of an electric shock do not run the DVD player e in the immediate vicinity of a heat source such as an oven heat fans and similar devices Heat contact can lead to the equipment overheating and to melting of plastic parts whereby the DVD player could be irreparably damaged e Do not place any open sources of fire like candles on the device A Warning In case of overheating there is a risk of fire e do not play in moist environments for example in cellars or in the sauna Moisure penetrating the applicance can lead to malfunctions and cause irreparable damage to the DVD player e This device was only designed for stationary operation under normal climatic conditions temperate climate A Warning Moisture penetrating into the device creates the risk of an electric shock e notin the immediate vicinity of water for example in the bath tub or in the swimming pool Do not place containers filled with water for example flower vases on the DVD player A Warning If water runs into the DVD player or if it falls into water it can be irreparably damaged and the risk of an electric shock exists e notin cupboards on shelves or other enclosed furnis hings as well as not on beds and covers because the venti lation of the DVD player will be impaired and it could o
23. e your own programme by selecting only certain chapters of an inserted DVD VCD S VCD for playback You can select the order in which the chapters are played yourself You can compile a maximum of 16 chapters of a film for programmed play 18 To use the programmed play e During playback or when playback is stopped press the PRG button on the remote control The programme menu is displayed on the screen KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 19 S KH 6510 6511 NOTE If you are not sure which number a programmable title and or a chapter has then you select the corresponding chapter with the Skip M4 Skip button during playback of the film and subsequently press the Display button on the remote control to superimpose all the information on the inserted DVD VCD S VCD onto the television screen Here you will find among other things the current title as well as the Title 2 Title 3 Title 4 Title 6 Title 6 Gleal All Use the control buttons lt P AV on the remote control to select the desired title Confirm the selection by pressing the OK button The chapter pertaining to the title will appear Chapter 4 Chapter 2 Chapter 3 Chapter 4 Chapter 6 Clear All Use the control buttons lt P AV on the remote control to select the desired chapter Confirm the selection by pressing the OK button The chapter will be filed on the first memory cell Further chapte
24. ect the sockets Y green Pb Cb blue and Pr Cr red with the corresponding sockets on the televi sion e Insert the white plug of the Audio Video cinch cable not supplied into the cinch socket inscribed L on the rear panel of the DVD player e Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the televi sion e Insert the red audio cinch cable plug into the cinch socket inscribed R on the rear panel of the DVD player e Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television e For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel e Inthe OSD menu under the menu Video Video output Component select respectively P Scan On this topic see also capital 8 3 Video settings Video output KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 8 eb CIE KH 6510 6511 6 5 Connection via VGA This connection variant is only possible with very high grade televisions LCD Plasma screens or Video projectors For this connection variant the television must be equiped with a VGA input and two unoccupied audio cinch sockets Check with the instruction manual of the corresponding playback device to see if this connections variant is available It is possible that additional playback device settings must be implemented For t
25. er on press the ON OFF button on the front panel of the DVD player If the DVD player is already switched on but is in Standby Mode press the button Standby on the remote control to switch the DVD player on Standby Mode is indicated by the red LED on the front panel of the device The device will check to see if a disc is inserted The SilverCrest Logo appears on the television screen e Firstly please familiarize yourself with the OSD Menu s operation by means of the following brief introduction 8 1 Using the OSD Menu To summon the DVD player s OSD Menu e Press the Setup button on the remote control The OSD Menu with its menu options will appear on the television screen a Language 08D language DVO m Video DVO xubtitie Audo s Audio DivX xubtitle DivX Sub Position Rating Misc The following menu options can be set Language Video Audio Rating and Misc e The control buttons gt AV will move you through the OSD Menu To confirm a selection or input press the OK button e To exit the selected OSD Menu option press the control button lt until the left Menu tab Language Video etc is active Select another Menu tab with the control buttons AV and activate the OSD Menu option with the control button gt e To exit the OSD Menu press the button Setup again 8 2 Language Settings You can preset the languages for the Menu language DVD Menu Subtitles Audio and DivX Subti
26. es for eightfold Quick search speed x8 will be displayed on the television screen e four times for sixteenfold Quick search speed x16 will be displayed on the television screen e five times for thirtytwofold Quick search speed x32 will be displayed on the television screen NOTE During Quick search no sound will be played e To continue with playback of the film at the selected posi tion with the normal speed during Quick search press the gt Play button on the front panel of the DVD player or on the remote control Play will again be displayed on the television screen Slow motion playback To playback the contents of the inserted DVD VCD S VCD in slow motion e For slow motion playback press the SLOW button e once for half playback speed compared to normal play back speed 1 2 will appear on the television screen e twice for a quarter of the playback speed 1 4 will appear on the television screen e three times for one sixth of the playback speed 1 6 will appear on the television screen e four times for one eighth of the playback speed 1 8 will appear on the television screen 17 zu zu KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 18 S KH 6510 6511 NOTE No sound is played during slow motion playback e To continue with playback of the film at the selected posi tion with the normal speed during slow motion press the gt Play button on the front panel of the DVD player o
27. gressive scanning A standard television image consists of 576 visible lines first the odd then the even image lines are displayed in alterna tion In other words one half image is shown at a time In this way only 30 full images 60 half images can be displayed per second This method is referred to as interlace format Contrary to this with the so called progressive or Progressive scan format all images are shown every time that is to say 60 full images per second are displayed This increases the overall quality of the image for example paused images and text appear sharper KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 25 S KH 6510 6511 Decoder The sound on DVDs with home theatre sound is saved on the DVD in encrypted encoded form Different encryption formats exist for several purposes for example AC 3 for the playback of Dolby Digital Surround Sound To playback the encrypted sound the playback device i e the DVD player and or the audio component connected to it i e Surround system must have a so called Decoder that can turn the encrypted signal back into music and or sound The Silvercrest KH 6510 KH 6511 DVD player is equiped with an AC 3 Decoder for Dolby Digital 5 1 Surround Sound sig nals Dolby Surround Dolby Surround is an analog audio format with which the two channels of a stereo audio signal are used to store sur round sound information for an additional channel Dolby Surround decoders co
28. have connected the DVD player to a stereo television and have not connected an audio component to the DVD player or gt have connected a Dolby Prologic compatible audio compo nent via the analogue stereo outlet via cinch cables to the cinch sockets L and R of the DVD player Check to see if you have selected the option Large in the OSD Menu under the Sub menu option Front LS No 4 3 or 16 9 image A Consult the operating manual of the television to determine which image format the television supports B Check whether the settings in the OSD menu match the available image format of the television Remote control does not function A Check to see that the remote control batteries are inser ted into the battery compartment according to the correct polarity B Check whether the batteries in the remote control are dead and replace both batteries if necessary 23 KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 24 KH 6510 6511 C Make sure that there are no obstructions between the remote control and the DVD player D When using the remote control position yourself not more than five metres from the DVD player Playback language subtitle language does not match the settings in the OSD menu The playback language subtitle language configured in the OSD menu is not available on the inserted disc One or more functions cannot be activated The selected function may not be available for all DVDs VCDs S VCDs
29. he inserted DVD VCD S VCD starts automatically NOTE DVDs VCDs and S VCDs that you want to playback with the DVD player possibly have a country code which is printed on the DVD cover The DVD player can only playback DVDs VCDs S VCDs with the country code 2 If no country code is printed on the cover of a DVD VCD S VCD e but instead the symbol bb then the DVD VCD S VCD can be played back with the DVD player e Then the DVD VCD S VCD can possibly not be played back with the DVD player You can check this by attempting to play back the DVD KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 15 S KH 6510 6511 Depending on the inserted DVD VCD S VCD it is possible that the contents of the DVD VCD s VCD will not playback imme diately rather first a selection menu appears on the television screen In this event select the menu option which will start the play back of the film with the control button lt P AV on the remote control e To start the playback of the film e Press the OK button on the remote control or e Pressthe gt Play button on the front panel of the DVD player or on the remote control Play will briefly be superimposed on the television screen In the display on the front panel of the DVD player will be shown if you have inserted a DVD e DVD e the number of the currently playing title and chapter e the played back so far time of the currently playing DVD
30. he number buttons e 0 1 for 1 hour e 0 5 for 5 minutes e 3 0 for 30 seconds KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 17 KH 6510 6511 Subsequently press the OK button to start playback at the selected position If you want to delete a position in the input field then select the position to be deleted with the control button lt P and press the button CLR on the remote control The index now skips back to To hide the Search menu press the button Search again on the remote control Quick search forward backward To select designated passages with Quick search during play back of the inserted DVD VCD S VCD e For Quick search forward press the button gt F FWD e once for doubled Quick search speed x2 will be displayed on the television screen e twice for quadrupled Quick search speed x4 will be displayed on the television screen e three times for eightfold Quick search speed x8 will be displayed on the television screen e four times for sixteenfold Quick search speed x16 will be displayed on the television screen e five times for thirtytwofold Quick search speed x32 will be displayed on the television screen e For Quick search backwards press the button 4 FRWD e once for doubled Quick search speed x2 will be displayed on the television screen e twice for quadrupled Quick search speed x4 will be displayed on the television screen e three tim
31. he settings for Image format Screen Mode TV Standard Video Output Brightness and Sharpness gt Language Axpect Ratio View Mode TV Syxtem Video out Brightnenx Sharpneun 20 Aspect Ratio Here you set the Image format in which the film should be displayed on the tele vision screen 4 3 or 16 9 The correct setting depends on the television to which you would like to connect the DVD player Here you can adapt the Height and width of the Image to the playback device being used for example Pan amp Scan Adapta tion of Image width formats to the 4 3 Image Here you set the TV Standard PAL NTSC Multi of your playback device Only set Multi if you have connected the DVD player to a Multi standard television Here you set the Vidio Output through which the DVD player is connected to the playback device Viwe Mode TV System Video out A IMPORTANT In the event that you set an incorrect Vidio Output for example P Scan although your television is not capable of Progressive Scan then the television screen will suddenly become black This is not a defect of the television or the DVD player In a case such as this e Press the M Stop button on the front panel of the DVD player or on the remote control KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 11 S KH 6510 6511 e Then keep pressing the button Video Out on the remote control until the Image reappears on the telev
32. his connection variant you will need e an audio cinch cable not supplied e a VGA cable not supplied These can be obtained from your dealer In order to connect the DVD player via VGA AUS e Connect the jack inscribed with VGA using a VGA cable to the corresponding socket on the television e Secure both plugs of the VGA cable with the screws e Insert the white audio cinch cable plug into the cinch socket inscribed L on the rear panel of the DVD player e Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the tele vision e Insert the red audio cinch cable plug into the cinch socket inscribed R on the rear panel of the DVD player e Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television e For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel e In the OSD menu select the menu Video Video output VGA On this topic see also capital 8 3 Video settings Video output 7 Connecting audio components to the DVD player Besides sound replay of DVDs VCDs S VCDs and from Audio and MP3 CDs via e the loud speaker of the television to which the DVD player is connected sound replay can also be produced via external Audio components
33. in hours minutes and seconds if you have inserted a VCD S VCD e VCD or S VCD e the number of the currently playing title e the played back so far time of the currently playing VCD S VCD in hours minutes and seconds 10 1 Features during playback of a DVD VCD or S VCD During the playback of a DVD VCD S VCD you can use the following DVD player features Pause playback To pause the playback of the inserted DVD VCD S VCD e During playback press the button gt II Play Pause on the front panel of the DVD player or the button II Pause Step on the remote control IL will now appear in the display on the front panel of the DVD player Pause will be displayed on the television screen On the screen you will see a paused image of the currently displayed scene e Press the button Il Pause Step on the remote control to jump to the next image e To continue with the playback of the film press the button gt Play 15 KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 16 S cI KH 6510 6511 Stop playback To stop playback of the film on the inserted DVD VCD S VCD press the button M Stop on the front panel of the DVD player or on the remote control with the Resume function If you have stopped playback of the inserted DVD VCD S VCD by pressing the W Stop button once then the DVD player automatically saves the position at which the playback was interupted This function is called the resume functio
34. ision screen Brightness Here you set the Brightness 1 16 of the DVD player Sharpness Here you set the contrast 1 16 of the DVD player 8 4 Audio settings In this OSD Menu you can administer the settings for Bass Management the size of individual loud speakers Test Sound Delays Digital Audio Outputs Night Mode and ProLogic ie Language Baxx management Front speakers Video Ce Surround Speakers Audio Subwoofer Text tonen N Rating Center delay Burr delay Minc Digital Output Bass management Here you can Activate Deactivate the Bass Management Activation on is necessary if you are not using a 5 1 am plifier with its own speaker management but rather want the sound output trans mitted via a particular amplifier In this case the DVD player must be informed which kind of speaker Small Large is to be run from the respective sound output In this way the sound and the separation of Highs Middles and Basses can be opti mally conformed Front Center Surround Subwoofer LS Here you can Activate Deactivate the particular speaker type and set the size Large Bass activated Small Bass deactivated only with the activation of Bass Management Small No speaker connected Test tones Here you can switch on a test sound for each particular audio output in order to check your 5 1 Surround settings Delays Center Surround Here you set the delays for the Centre speaker
35. itional film material priority for display is given to the music or the film material DVD AUDIO The music has display priority DVD VIDEO Film material in Dolby 5 1 has display priority 12 9 Initial operation of the DVD player After you have e placed the DVD player in a suitable location e connected the DVD player to a television by one of the designated connection options e connected the DVD player if desired to a HiFi or Surround system analogue digital for example a Dolby Digital or DTS receiver e made the remote control ready for operation by inserting the batteries e become acquainted with the activation and handling of the OSD Menu using the remote control the DVD player is ready for operation 9 1 Inserting the DVD To play a disc with the DVD player e Switch on your television e Make sure that the DVD player is ready for operation If the television the DVD player and possibly other connected devices i e an audio component are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen If no disc is inserted into the DVD player s disc tray The message No disc apears on the TV screen e Open the disc tray by pressing the button amp Open Close on the remote control or on the front panel of the DVD player Open will appear on the TV screen e Insert the disc in the disc tray wi
36. light next to the memory card slot will go out e You can now remove the memory card USB memory stick from the memory card slot 44 10 Playing back DVDs VCDs or S VCDs To play back a DVD VCD S VCD with the DVD player e Switch on your television e Make sure that the DVD player is ready for operation If the television the DVD player and possibly other connected devices i e an audio component are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen es e Open the disc tray on the front panel of the DVD player by pressing the button amp Open Close on the front panel of the DVD player or on the remote control Open will now appear In the display on the front panel of the DVD player and on the television screen e Insert a DVD VCD S VCD disc in the disc tray with the inscri bed labled side up e Press the button amp Open Close on the front panel of the DVD player or on the remote control again to close the disc tray Close will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing e The contents of the inserted DVD VCD S VCD will now be loaded this may take a few seconds Meanwhile Load will flash in the display on the front panel of the DVD player and Read will appear on the television screen e Playback of t
37. n Stop Play to continue will be shown on the television screen As soon as you again press the button Play on the front panel of the DVD player or on the remote control playback will continue from the saved position Without Resume function If you have stopped playback of the inserted DVD VCD S VCD by pressing the W Stop button once and you press the E Stop button a second time then the saved position at which playback was interupted is deleted As soon as you press the Play button again playback of the inserted DVD VCD S VCD will start from the beginning To activate the DVD Menu NOTE This function may possibly not be available on all DVDs If you attempt to execute a function that is not available the symbol is displayed on the television screen Many films on DVD have a root menu on the disc that offers the option to play the main film as well as other options such as e subtitle language selection and film tone e direct chapter selection e playback of the film s bonus material background infor mation Making of etc If such a menu is present on the DVD that is inserted into the DVD player then you can activate it during playback by pressing the button Menu on the remote control You select individual menu options by pressing the control buttons lt P AV on the remote control to confirm the selected menu option you press e the gt Play button on the front panel of the DVD pla
38. n Standby once more e To turn the DVD player off completely press the ON OFF button on the front panel of the DVD player 11 Playback of JPEG Photo CD WMA MP3 MPEG4 Place a memory media in the DVD player If you are using a memory card or USB stick press the DVD CARD USB button The contents of the data carrier CD DVD USB memory stick or memory card will be displayed on the television ur JPG KIF 0020 JPG KIF 0099 JPG KIF 0034 JPO KIF 0036 bad rd KIF 0036 JPG KIF 0037 JPG KIF 00an JPG KIF 0039 e The data will be listed on the left Data window e On the upper right several settings can be implemented Filter Repeat Mode Edit Mode Program view and Add to Program e On the bottom right is the preview window in which is displayed the JPEG Image as well as its size e Select a file with the help of the control buttons AV e Confirm the selection by pressing the OK button The file is implemented i e the JPEG Photo is displayed Filter function You can filter out designated file types in the display e Switch to the settings window with the help of the control buttons lt P e Select Filter and confirm the selection with the OK button You can now select which file types you want to filter out by pressing the OK button Audio Photo or Video e Press the control button to exit the settings window Filter sri s nz KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr
39. ng number RMA number as well as e an address to which you can send your product for warranty processing Please include a copy of your purchase receipt with all postal submissions The device should be packed in a manner that is safe for transport and the RMA number should be directly vi sible Products sent in without the RMA number cannot be processed NOTE Warranty claims are only valid for material and manufacturing defects Warranty claims are not valid e for parts subject to wear and tear e for damages to fragile parts such as switches or batteries The appliance is intended solely for private not commercial use If this product has been subjected to improper or inap propriate handling abuse or interventions not carried out by one of our authorised sales and service outlets the warranty will be considered void Your legally specified warranty claims are not limited by this warranty 26 zn Zu KH6510 11 A4 V3_EN qxd 24 08 2006 12 25 Uhr Seite 27 I W c a a oO E lt z 2 gt 7 me c oO 2 v 7 cn p T DVD player KH6510 6511 In order to ensure free repair please contact the service hotline Keep your cash receipt ready for this purpose Please write the sender s address clearly Last name First name Street Pincode Place Country Telephone Date Signature Error description Warranty DES Ltd Tel 0870 787
40. ng the television s instruction manual For this connection variant you will need e an audio cinch cable not supplied e an S video cable not supplied These can be obtained from your dealer In order to connect the DVD player to a television via S video Connect the jack inscribed with S Video to a television S Video socket using an S video cable Insert the white audio cinch cable plug into the cinch socket inscribed L on the rear panel of the DVD player Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the tele vision Insert the red audio cinch cable plug into the cinch socket inscribed R on the rear panel of the DVD player Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television For playback select the matching channel on your tele vision Check with the television s instruction manual on how you can set the AV channel In the OSD menu select the menu Video Video output RGB On this topic see also capital 8 3 Video settings Video output 6 3 Connecting to a television via video input composite video For this connection variant the television must be equiped with Audio Video cinch sockets Composite Video In order to connect the DVD player to a television via Composite Video you will need e Audio Video cinch cable
41. ngs The factory setting for the PAL standard also allows the DVD player to operate with SECAM televisions in so far as these can process the signals gt On this topic see also capital 8 3 Video settings TV standard Depending on the features of the television there are various options for connecting the DVD player to it 6 1 Connecting to a television via Scart Cable RGB Note Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection Select this connection variation in the case of televisions equiped with an RGB input If you are not sure if the television is equiped with an RGB input then you can check this by consulting the television s instruction manual Connect the jack inscribed with Euro Scart to a television Scart socket by using the supplied Scart cable For playback select the matching chanel on your television Check with the television s instruction manual on how you can set the AV chanel In the OSD menu select the menu Video Video output RGB On this topic see also capital 8 3 Video settings Video output 6 2 Connecting to a television via S Video NOTE For this connections variant the television must be equiped with an S Video input and two unoccupied audio cinch sockets If you are not sure if the television is capable of handling S Video for example via cinch sockets then you can check this by consulti
42. ntrols and connections Front panel Display IR remote sensor Disc tray Button amp Open Close Memory card slot USB slot Indicator lamp Button Scan forward Button 44 a nn _ Button Skip forwar Button Skip backwards 020000 Button M Stop Fig 1 Front panel Button gt II Play Pause Button ON OFF BO O8660000060080 ear panel Digital OUT socket Coaxial Surround cinch socket Center Surround cinch socket SL Surround cinch socket FL Video OUT cinch socket VGA OUT socket 0080 Stereo cinch socket L Stereo cinch socket R Euro Scart socket Mains cable with power plug Pr Cr cinch socket Pb Cb cinch socket Y cinch socket S Video OUT socket OO Surround FR cinch socket Surround SR cinch socket Surround Subwoofer cinch socket 2 Digital Out Optical socket Fig 1 2 Rear panel 2 GOSSGSSVOOSO9SGGG860 emote control DR olen OO Button amp Standby 0 sry Button Dimmer Display brightness adjustment Button amp Open Close Button Page Button Increase or reduce volume ButtonX Mute Switch off sound Button Skip Skip forward ButtonM4 Skip Skip backward SLOW MUTE Button Stop Button gt Play RWD FFWD SKIP SKIP Button DVD Card USB Show contents of memory card o _ pa Button OK Confirm input pusester PLAY STOP Control buttons lt gt AV u Button Video Out Adj
43. nvert the signals back into sound or music and send the audio to two additional speakers that are situated behind the listener Dolby Prologic In comparison with the Dolby Surround audio format Dolby Prologic uses an additional channel in the stereo signal this is the center channel The corresponding center speaker is situated directly between the stereo speakers The deepest tones are sent to a low range speaker called a subwoofer The subwoofer can be placed at any location in the room the reason for this is that the deep tones emitted by the subwoofer cannot be precisely localised by the human ear Dolby Digital 5 1 Dolby Digital also referred to as AC3 is a digital audio for mat with which up to six separate audio channels can be transmitted On most current DVDs the audio is stored in Dolby Digital 5 1 format the 5 in the name 5 1 stands for the three front and two rear surround sound channels the 1 stands for the subwoofer channel DTS DTS is short for Digital Theatre System and is designated one of the most conventional Surround Sound formats for DVDs As with Dolby Digital 5 1 DTS uses three front and two rear surround sound channels as well as a subwoofer channel What are PAL NTSC and SECAM PAL PAL is short for Phase Alternation Line PAL is in Central and Western Europe exception France see the heading SECAM the most wide spread and common colour television standard 25 KH6
44. r on the remote control Play will again be displayed on the television screen Frame advance reverse playback NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen To shunt the contents of an inserted DVD VCD S VCD forward one frame at a time e During playback press the II Pause Step button to stop playback On the screen you will see a paused image of the currently displayed scene e With each further press on the Il Pause Step button you will shunt the paused image forward one frame at a time e To continue with playback press the Play button on the front panel of the DVD player or on the remote control Zoom NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen During playback of an inserted DVD VCD S VCD you can zoom in to the image on the television screen in three stages For this you press the Zoom button on the remote control e once for the first zoom stage 1 will be displayed on the television screen e twice for the second zoom stage 2 will be displayed on the television screen e three times for the third zoom stage 3 will be displayed on the television screen Sections of the enlarged image can be shunted with the con trol buttons
45. r 1 followed by 0 for the tenth title The numbers entered will be briefly superimposed on the television screen e Then press the OK button on the remote control Playback of the title with the entered number will now automatically begin Search function You can also use the search function to select a title or chapter from the inserted DVD VCD S VCD directly Direct chapter or time selection via the Search function NOTE These functions may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen Entering the time position via the Search function To select a chapter by entering its time position e During playback press the Search button on the remote control The Search menu will be superimposed on the television screen e The input field Title marked is automatically selected first Enter the desired title with the number buttons 0 to 9 The title 01 is with most DVDs the main film e Press the control button V to select the input field Chapter marked Enter the desired chapter with the number buttons 0 to 9 e Press the control button V to select the input field time marked Enter the time position in hours minutes and seconds with the number buttons 0 to 9 Examples To start playback 1 hour 5 minutes and 30 seconds from the beginning of a film you press one after the other t
46. r the other will be superimposed on the television screen The number of the currently superimposed sub title language will be superimposed on the television screen i e 1 10 for the first of ten available sub title languages When the last of the available sub title languages has been superimposed i e 10 10 for the tenth of ten available sub title languages then you can switch off the sub title function by pressing the Subtitle button again Off will be superimposed on the television screen To change playback language NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen With many films on DVD VCD S VCD you can select another playback language during the playback by pressing the lt Audio button on the remote control With the first press of the lt 4 Audio button the first available playback language will be switched on With each further press of the X Audio button other available playback languages will be switched on one after the other The current switched on playback language will be super imposed on the television screen Programmed play Programme NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen With the Programme function you can compil
47. r the mains voltage The power plug is used for disconnecting the mains voltage In order to completely disconnect the equipment from the mains voltage the power plug must be pulled from the power socket The power socket for the power plug should be situated close to the device and easily accessible KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 5 eb KH 6510 6511 A Danger Laser radiation The DVD player is equiped with a Class 1 Laser e Never open the device e Never attempt to repair the device There is invisible laser radiation inside the device e Do not expose yourself to the laser beam as this could lead to eye injuries 5 Remote control 5 1 Inserting the batteries 1 Open the battery compartment on the back of the remote control Now insert the two batteries type AAA R 03 micro cells included in the package into the battery compartment Make sure that the batteries are inserted in accordance with the correct polarity Replace the battery compartment cover 5 2 Using the remote control In order to guarantee faultless operation when using the remote control e Always point the remote control during use directely at the DVD player e Make sure that there are no obstructions between the remote control and the DVD player that will hinder re ception e When using the remote control place yourself not more than 5 metres from the DVD player Otherwise interferences can occur during operation of the
48. r this e Press the Mark button on the remote control during the playback of a film On the television screen will be super imposed Bookmark 1 tent Bookmark 2 feel Bookmark 3 teat e Assoon as the passage is reached on which you want to place a bookmark press the OK button on the remote control The exact time position of this passage within the film will now be displayed in hours minutes and seconds under Bookmark 1 e If you want to place another bookmark then press the control button Y to select Bookmark 2 in the superimposed field on the television screen Press the button OK again as soon as the passage is reached that you want to place the second bookmark e To place a third bookmark proceed in the same manner When you have placed all desired bookmarks press the Mark button to hide the selected bookmarks on the television screen e Later if you want to skip to the passages on which you have placed bookmarks press the Mark button again e Select the desired bookmark with the control buttons AV e Confirm the selection by pressing the OK button on the remote control Playback of the selected chapter now begins automatically at the location on which you have placed the selected bookmark e To delete placed bookmarks press the CLR button on the remote control To set the playback volume Press the Vol button on the remote control during play back to increase playback volume or the Vol to
49. red on them of 20 minutes 8 cm format and or 74 minutes 12 cm format VCDs exist in two versions e Only audio and video data can be played back on version 1 1 VCDs S VCDs e PBC Playback control functions are available on version 2 0 VCDs S VCDs In addition paused images can be displayed in high resolution Playback Control PBC VCDs S VCDs of version 2 0 have Playback Control PBC This means that a root menu is available on the VCD S VCD with which various features of the VCD SVCD can be accessed What are titles and chapters Titles are the largest units of video and audio data on DVDs with many DVDs the Main film has the title number 01 For bonus material i e film trailers background information etc that is available on many DVDs current additional title numbers can be used Chapters are the next smaller unit of video and audio data beneath titles If the title or titles on a DVD VCD S VCD are subdivided into chapters they are assigned numbers that can be entered to select the chapters directly Please note that not on all DVDs e are the title or titles numbered subdivided into chapters e Are chapters also indicated as scenes i e in the DVD s main menu What are Scart S Video Composite Video Progressive Scan and YUV Scart Scart refers to a 21 pin standardised connector over which the RGB signals video signals and S video signals as well as numerous control and additional signals
50. ress the button Menu on the remote control during playback Skip to beginning of chapter Skip NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen With the gt bdl Skip forward and I44 Skip backwards buttons on the remote control or on the front panel of the device you can manoeuvre inside the film on the inserted DVD VCD S VCD during playback e forwards to the beginning of the next chapter or e skip backwards to the previous chapter The chapter selected will immediately play back without the necessity of pressing the Play button The number of the selected chapter will show in the display on the front panel of the DVD player to the left of the played time indicator 16 nz Entry of the title number via number keys NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen Instead of using the Skip function you can also enter the title from within the film on the inserted DVD VCD S VCD direct by entering the title number via the number buttons 0 to 9 on the remote control For this e During playback or while playback is stopped press the number button corresponding to the title number on the remote control for example the 3 button for the third title o
51. ressing the M Stop button twice e Select All to repeat the entire VCD S VCD until repeat play is switched off or the playback is stopped by pressing the W Stop button twice e To switch off repeat play press the Mode button during playback Select the option Off in the Playback Modes menu under the menu option Repeat When you press the Mode button again repeat play is switched off Sequence repeat A B With this function you can repeatedly playback a favourite sequence inside a chapter of the currently playing DVD VCD S VCD For this e Press the button A B on the remote control during playback as soon as the beginning of the desired sequence is played back Rep A will be displayed on the television screen e Press the button A B again as soon as the end of the desired sequence is played back Take note thereby that the beginning and end of the sequence must be contained inside one chapter The repeated playback of the selected sequence begins im mediately without the necessity of pressing the gt Play button The sequence will continue to repeat until you press the A B button again in order to switch off the function Then Rep AB Off will be briefly displayed on the television screen 20 Bookmark function During the playback of a DVD VCD S VCD you can place so called Bookmarks in order to watch again later selected passages from a film You can place up to three bookmarks Fo
52. rol buttons gt AV and confirm the selection with the OK button The chapter will be filed on the first programme position Select the tenth chapter with the control buttons lt P AV and confirm the selection with OK The chapter will be filed on the second programme position Select the option Playback with the control buttons lt P AY below the input field Press the OK button The pro grammed playback now starts with chapter 3 Superimpose disc information NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen With this function you can superimpose during playback on the television screen all available information pertaining to a DVD VCD S VCD inserted in the DVD player For this During playback press the Display button on the remote control On the television screen will be superimposed In respect to DVDs 19 the time already played back of the currently running DVD in hours minutes and seconds the time left to the end of the film in hours minutes and seconds the type of the inserted disc DVD the current title number the total number of titles the current chapter number the total number of chapters the currently entered playback language the current selected sub title setting the current selected camera perspective the number of currently available camera perspective
53. rs will in turn be filed in the memory cells 2 16 To delete the current last input select the input field Delete with the control buttons lt AV or press once the CLR button By pressing the CLR button again the last chapter input in each case is always deleted What are titles and chapters On this topic please refer to Section 15 Glossary KeyWord Index When you have programmed the desired chapter select the option Playback below the input field using the con trol buttons lt P AY Press the OK button The pro grammed playback now starts with the chapter entered in the programme memory cell 1 Inside the programmed chapter you can skip to the start of the next or preceeding chapter by pressing the WI Skip or 44 Skip buttons on the front panel of the DVD player or on the remote control To delete the programmed playback press the M Stop button on the front panel of the DVD player or on the remote control twice during playback chapter numbers gt On this theme see also the chapter Superimpose disc in formation on page 20 Programming example You may enter the chapters with the numbers 03 and 10 of a film on a DVD VCD S VCD for programmed playback in this example the main film has the title number 01 In the programme menu the first title is automatically tagged To confirm the selection press the OK button The chapter of the first title now appears Select the third chapter with the cont
54. s Angles KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 20 S CIA KH 6510 6511 For VCDs S VCDs e the time already played back of the currently running VCD S VCD in hours minutes and seconds e the time left to the end of the film currently playing in hours minutes and seconds e the type of inserted disc VCD S VCD e the current playback language setting e To hide the disc information press the Display button again Switch on several playback modes NOTE This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol is displayed on the television screen During the playback of a DVD VCD S VCD you can switch on the following playback modes Random Playback When you switch on the random playback the chapters on the inserted DVD VCD S VCD will be played back in random order To switch on the Random Playback e Press the Mode button on the remote control during playback The Playback Mode menu will be superim posed on the television screen Play Mode Repeat Aff e The menu option Mode is automatically selected first e By pressing the OK button on the remote control you can select between the options Normal and Random with VCDs S VCDs the option PBC is added Set to Random and press the Mode button again The Playback Mode menu is hidden and the random function is now switched on e To switch off the ran
55. s between the DVD player and television or Video projector are plugged firmly into the corresponding sockets B Check whether the settings in the OSD menu match the connection option you have used to connect the DVD player to the television or the video projector gt For this refer to chapter 6 Connection of the DVD player to a television KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 23 S KH 6510 6511 C Using the television s or Video projector s instruction manual check to see if current settings to the television or Video projector are necessary in order to use the DVD player with the television No sound A Check to see if the television and or DVD player are currently switched to mute B Check to see if all connections cables between the DVD player and currently connected audio components are firmly plugged into the corresponding sockets C Check whether the settings in the OSD menu match the connection option you have used to connect the audio components to the DVD player gt For this refer to chapter 7 Connecting Audio components to the DVD player D Using the television s instruction manual check to see if current settings to the television are necessary in order to use the DVD player with the television E Using the instructions manual of a currently connected audio component check to see if settings to the compo nent are necessary in order to use it with the DVD player F Ifyou gt
56. s properly plugged into the socket B Check whether the socket into which you have plugged the power cord of the DVD player is supplying electricity by plugging in another device Where appropiate plug the DVD players power cable into another power socket C Check to see that the display dimmer function is switched off For this purpose press the button Dimmer on the remote control D switch the DVD player off by pressing the ON OFF button and then wait ten seconds Switch the DVD player on again by pressing the ON OFF button once more The display indicates No Disc even though a disc was inserted A The disc is dirty scratched or damaged Clean the disc or insert a different disc B The Country Regional code of the inserted DVD VCD S VCD does not coincide with the Country Regional code of the DVD player In this case the DVD VCD S VCD cannot be played with the DVD player Inserted disc is not played A film of condensation may have formed on the laser sensor lens of the DVD player In particular this may occur if the DVD player has been subjected to extreem temperature fluc tuations In this case place the DVD player in a dry environment at normal room temperature First remove any inserted disc from the disc tray Then leave the DVD player switched off for at least one hour without using it until the condensation film has evaporated No image or only black and white image A Check to see that all connection cable
57. such as HiFi systems Dolby Digital DTS receiver or Surround Sound systems You have the following options here 7 1 Connecting a HiFi system In order to enjoy a full sound experience when playing DVDs with the DVD player you can connect a HiFi system to the player Before connecting check with the HiFi system s instruction manual to verify e if the HiFi system is suitable for connection to a DVD player If yes e if the HiFi system is equiped with cinch sockets if yes you can connect the HiFi system to the DVD player via cinch cables In order to connect a HiFi system O ng O Case o n e Insert the white cinch cable plug into the cinch socket inscribed L on the rear panel of the DVD player e Then insert the white plug at the other end of the cinch cable into the left channel cinch socket on the HiFi system e Insert the red cinch cable plug into the cinch socket inscribed R on the rear panel of the DVD player e Insert the red plug at the other end of the cinch cable into the right channel cinch socket of the HiFi system e Check with the instruction manual which settings on the HiFi system may be necessary in order to reproduce sound via the HiFi system during the playback of a DVD VCD S VCD Audio or MP3 CD from the DVD player NOTE For an optimal sound experience place your HiFi system s
58. supply AC 220 V 240 V 50 Hz Power consumption 15 Watt TV standard PAL NTSC Operating temperature 5 35 C Humidity 5 90 no condensation Video output Output level 1 0 2 0 2 Vp p 75 Q Horizontal resolution gt 500 Lines Signal to noise ratio gt 60 dB Audio output Impedance 10 kQ Output level 1 8 0 2 0 8 Vrms 1kHz 0 dB lt 0 01 JIS A 1kHz typical gt 80 dB JIS A 1 KHz typical gt 95 dB JIS A 1 kHz typical Harmonic distortion Dynamic range Signal to noise ratio Digital audio output Coaxial output and optical output 2 Applications and functions The Silvercrest KH 6510 KH 6511 DVD player is exclusively intended e as an electronic entertainment device for the playback of DVD videos in 12 cm and 8 cm diameter formats with Country Regional code 2 or au designated by the Logo e ofthe video formats MPEG 4 MPEG 4 ASP and with DivX 3 11 DivX 4 x DivX 5 x multichannel DivX and DivX Pro as well as Nero Digital compressed videos e of video CDs VCDs and Super video CDs S VCDs in 12 cm and 8 cm diameter formats designated by the Logo M e of audio CDs in 12 cm and 8 cm diameter formats designated by the Logo Misch e generally of the data format CD Audio cda MP3 mp3 Windows Media Audio wma DivX avi Nero Digital mp4 und JPEG jpg on the storage media CD R CD RW USB memory sticks as well as Memory Car
59. t the child lock in three levels G Only unrestricted DVDs can be played PG 13 No DVD with an age restriction over 13 can be played Adult All DVDs including those with age restrictions over 18 can be played To activate the age release you must select the option Parental control in the OSD Menu under Rating and enter the pass word 8888 You confirm your entry by pressing the button OK P KH6510_11_A4 V3_EN qxd 24 08 2006 12 25 Uhr Seite 12 Again select the option Parental control and now set the desired child lock level You confirm your entry by pressing the button OK Change password Here you can change the preset password 8888 and submit your own password Only the numbers 0 9 can be used To change the password select the option Change password in the OSD Menu Enter the valid password You confirm your entry by pressing the button OK Again select the option set password and enter the new password You confirm your entry by pressing the button OK NOTE In case you should forget your new password you can use the factory default password 8888 8 6 Misc settings In this Menu you can return the DVD player to its factory de faults and set the DVD playback priority Language m Video s Audio Rating Use Default Settings Here you reset the DVD player s factory default settings DVD Priority Here you make the setting to decide whether in audio DVDs with add
60. th the inscribed labled side up For twin sided discs The side you would like to play must face down e After you have inserted the disc press the button amp Open Close on the remote control or on the front panel of the DVD player again to close the disc tray e The contents of the disc will now be loaded this may take a few seconds In the meantime the message Loading appears on the TV screen 9 2 Inserting memory cards USB memory sticks with MP3 WMA DivX JPEG data NOTE The DVD Player always starts in DVD mode To read memory cards you press the button DVD Card USB on the remote control The DVD player recognizes the data formats JPEG MP3 WMA und MPEG4 DivX Always only insert one memory card in the DVD Player The DVD Player always reads the data from the bottom slot the CF I CF Il Card first If a memory card is inserted the data in the upper slot is not read KH6510_ 11 A4 V3 _EN qxd 24 08 2006 12 25 Uhr Seite 13 S KH 6510 6511 In order to insert memory cards of types CFI CFII SD MS MSPro MMC and SM into the DVD player e Switch on your television e Make sure that the DVD player is ready for operation If the television the DVD player and possibly other connected devices i e an audio component are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen If no disc is inserted into the DVD player
61. the centre screen downwards screen upwards random transition effect no transition ef fect 12 Cleaning of the DVD player Clean the housing of the DVD player with a slightly damp cloth and a mild cleanser only When cleaning make certain not to allow any moisture to enter into the DVD player Clean the inside of the disc tray if necessary with a clean dry brush only e g lens cleaning brush available from camera stores Never use moisture to clean the inside of the disc tray A Warning If moisture enters the DVD player the risk of an electric shock exists The DVD player may also be irreparably damaged 13 Disposal Y Do not dispose of the appliance in your normal domestic mm Waste Dispose of the appliance through an approved disposal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre Disposing of batteries Do not dispose of the batteries with household waste Every consumer is legally committed to disposing of batteries at the collection point in his community or with the trade This obliga tion is intended to ensure that batteries are disposed of in an environmentally safe fashion Only dispose of batteries when they are fully discharged 22s nz 14 Troubleshooting The display is blank DVD player does not function even though it was switched on A Check whether the power cord i
62. tles functions These settings are valid for every DVD if the selected language is present on the DVD a Language Video 080 language DVD menu DVD xubtitie Audio g Audio DivX subtitle DivX Sub Position a Rating Misc OSD Language Here you set the language in which the OSD Menu will be displayed on the tele vision screen Here you set the language in which the DVD Menu will be displayed on the tele vision screen Not all films contain a menu on the DVD If a menu is available then it can only be shown in the language that you set if this language is available on the DVD If the selected language is not available then the DVD Menu will be displayed in another language DVD Menu 10 DVD Subtitle Here you set the language of the subtitle when the playback of a DVD is displayed on the television screen only if the langu age is present on the DVD Here you set the language in which the DVD should be started Films can then only be played back in the language that you selected if this language is available on the DVD If the selected language is not available the DVD will start with another language Here you set the character encoding for the DivX Subtitle The standard setting is Western European Audio DivX Subtitle DivX Sub Position Here you set the position Bottom Middle Top of the DivX Subtitles 8 3 Video settings In this OSD Menu you can administer t
63. upper memory card slot Insert the MMC SD memory cards into the upper memory card slot straight and with the contacts forward Thereby the side of the memory card that the contacts are on must be facing downwards and the slanted corner of the memory card must be on the right side Brand 128 MB MermoryStick memory cards MS MSPro MemoryStick memory cards must be inserted into the upper memory card slot Insert MF memory cards into the upper memory card slot straight and with the contacts forward Thereby the side of the memory card that the contacts are on must be facing downwards and the slanted corner of the memory card must be on the left side an 8z pueig USB memory sticks USB The DVD player supports USB memory sticks 1 1 and 2 0 up to a capacity of 512 MB USB memory sticks must be inserted into the USB port an ziS S vA ee a e If the USB memory stick is inserted correctly into the port the green control light next to the lower loading slot will light up e Press the button DVD Card USB on the remote control to show the contents of the memory card 9 3 Removal of Memory cards USB Memory sticks from the memory card slot Memory cards USB Memory sticks should only be removed after the memory card slot is deactivated Thus avoiding the possibility of damage or data loss e Press the button DVD Card USB on the remote control to return to the DVD mode The green control
64. ust video output Button Search Select time position Button Angle Change the camera perspective Button CLR Delete input Button PRG Superimpose the program menu Button Zoom Increase reduce picture size Button Mark Bookmark function Button A B Repeat sequence o Button Mode Superimpose playback mode IDG SVETTE ANGLE SEARG Button Title Superimpose DVD CD contents 26 N Button Menu Superimpose DVD menu MENU TME PRG CIR Button Subtitle Superimpose subtitles D i 7 0 Button lt 4 Audio Change playback language MODE AS MARK ZOOM Button Display Superimpose disc Information p Y iz Button Setup Superimpose OSD menu Button Il Pause Step Button F FWD Scan forward S verCrest Button F RWD 44 Scan backwards Button Slow Adjust playback speed Number buttons 0 to 9 Number input 0 9 BGS GG VOOSGSSSSGOGGGOSSSOO0OG6009 Fig 2 Remote control KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 3 S DVD player SilverCrest KH 6510 6511 Page 1 Technical data 4 2 Applications and functions 4 3 Delivery Contents 4 4 Setting up of the DVD player Safety instructions 4 5 Remote control 5 5 1 Inserting the batteries 5 5 2 Using the remote control 5 5 3 Replacing the batteries 5 6 Connecting the DVD player to a Television 6 6 1 Connecting to a television via Scart Cable R
65. ve plug from the Optical inscribed socket on the rear panel of the DVD player and insert the optical cable plug e Insert the plug at the other end of the optical cable in the corresponding socket of the digital audio component NOTE The optical cable is a glass fibre cable and must not be bent during installation Otherwise the glass fibre contained in the cable could break and the cable would become unusable OQ O TEI KH6510 11 A4 V3 EN qxd 24 08 2006 12 25 Uhr Seite 9 eb KH 6510 6511 NOTE Make sure that no dirt can enter into the optical cable socket This could cause signal interference Always insert the protective plug into the socket if no optical cable is connected 7 3 Connecting digital audio components via analogue cables If a digital input is not available on the audio component you can connect the DVD player to it via conventional analogue cinch cables 9 6 a Io 5 6 O_00 0 N Han In order to connect the DVD player with analogue cables Insert a cinch cable in each of e the sockets inscribed with FL front left channel
66. verheat For the same reason do not place another piece of equipment i e a television on the DVD player In order to guarantee sufficient ventilation the selected loca tion of the DVD player must provide for a clearance of at le ast 10 cm at the rear on top and on either side from walls and any other object e This device must not be placed in the immediate vicinity of flammable materials for example curtains flammable li quids etc A Warning When overheated the DVD player can be irreparably dama ged and the risk of a fire exists A IMPORTANT For damage to the DVD player that results from e The effects of moisture e water penetrating into the equipment e Overheating No liability warranty will be assumed A IMPORTANT Do not plug the DVD player into an electrical outlet at this time Wait until you have connected the DVD player to a television set In the event that you wish to change the type of video or audio connection you must first pull the power plug from the power socket Otherwise the DVD player and possibly equipment connected to it could become irreparably damaged through voltage peak strikes A Warning Equipment connected to a power supply can be damaged during a thunderstorm You should therefore always pull the power plug from the power socket when there is a storm A IMPORTANT The main switch on the front panel is used for the ON OFF function It is not used as a disconnect switch fo
67. yer or on the remote control or e the OK button on the remote control To return to playback press the button Menu again on the remote control Use the button Page and Page to select between the pages of the DVD menu NOTE This function is not available on all DVDs NOTE If you stopped playback by pressing the M Stop button twice playback stop without resume function activation of the main menu on the disc is not possible Playback Control PBC with VCDs S VCDs Many VCDs S VCDs have playback control in short PBC playback control means a main menu which allows for operation of several functions of the VCD S VCD If PBC is available on the disc inserted into the DVD player then you must first activate it in order to superimpose the menu To activate PBC e During playback or while playback is stopped press the button Mode on the remote control The Playback Mode menu will be superimposed on the television screen Play Mode Mode Repeat off e The menu option Mode is automatically selected first By pressing the button OK on the remote control you can select between the options Off Random and PBC Set to PBC and press the Mode button again The Playback Mode menu will fade out PBC is now switched on NOTE If you switch PBC on during playback it is possible that play back will stop then start again at the beginning e To superimpose the PBC main menu p

Kompernass KH 6510 Operating Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents