Harbor Freight Tools High Resolution Digital Inspection Camera with Recorder Product manual
Contents
1. 2 Screen nape Handheld Display Unit Power Winger Supply E Head with 7 Light Mirror Magnet USB to Mini B Cable Memory DC Power Card Slot Input Charging N Indicator Mini B Port RCA Video Out Port Page 6 For technical questions please call 1 888 866 5797 Item 61838 Charging the Battery 1 Plug the Power Supply into the DC Power Input then plug other end into a grounded 120V outlet 2 The red Charging Indicator will come on and will turn green when charging is finished Tool Set Up AWARNING 3 DO NOT charge longer than recommended See Specifications on page 4 When charging is complete disconnect Camera from Power Supply then unplug Power Supply from outlet TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK Make sure that the Camera is OFF and unplugged from its charger before performing any procedure in this section 1 Connecting Cable a Carefully push Cable s key into Cable Connector s slot b Turn Cable Connector counterclockwise until the Cable and Cable Connector are securely attached 2 Disconnecting Cable a Turn Cable Connector clockwise until the Cable and Cable Connector are detached b Remove Cable Slot Key Connector Figure A 3 Micro SD Card a Insert the Micro SD Card into the Memory Card Slot then push down on the card until it clicks into place Note When the card is installed the icon will appear on the D2. LACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Parts List Part Description Qty 2 Cable with 8 5mmimagerHead tt 4 SVDC Power Supply J1 4 RCACable i S1 5 USBtoMiniBCable _ _ 1 6 MicroSDCard _ O 7 45 Mirror Accessory J1 8 Hook Accessory O Sl 9 MagnetAccessory _ J1 Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Item 61838 For technical questions please call 1 888 866 5797 Page 11 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be l
3. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference i i N C A ITEM 61838 HIGH RESOLUTION DIGITAL VIDEO INSPECTION CAMERA Visit our website at http www harborfreight com Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 888 866 5797 as soon as possible Copyright 2014 by Harbor Freight Tools All rights reserved gt No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Important Safety Information Work Area Safety 1 Keep your work area clean and well lit Cluttered benches and dark
4. areas may cause accidents Operate the Camera in a well ventilated work area Do not operate the Camera in explosive atmospheres such as in the presence of flammable liquids gases or heavy dust Keep a fire extinguisher suitable for gasoline chemical electrical fires nearby Keep bystanders children and visitors away while operating the Camera Electrical Safety 1 Lithium Battery Charging Safety 1 Page 2 Before inspecting walls shut off the circuit breakers to the whole house Before inspecting pipes that may contain an electric charge have them checked by a qualified electrician Before inspecting an engine turn off the automobile Do not use the Camera while standing in water Avoid body contact with grounded surfaces such as pipes radiators ranges and refrigerators Do not leave Camera unattended while charging Battery charging should be done by adults only Use the supplied charger only Charge on non flammable surface and keep away from flammable items Disconnect AC wall chargers from outlets while not in use 6 7 6 For technical questions please call 1 888 866 5797 This product is not a toy Do not allow children to play with or near this item Use as intended only Inspect before every use do not use if parts are loose or damaged Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harb
5. iable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state C E N Coe 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 1 888 866 5797
6. isplay Screen b To remove card push down on the card until it pops up then remove Item 61838 4 For technical questions please call 1 888 866 5797 Attaching Accessories a Hold the accessory against the Imager Head placing the Hook in the hole b Match the slot on the Sleeve to the accessory then slide the Sleeve down the Imager Head until it covers the Hook Sleeve Accessory N Imager Head Figure B Connecting to Computer with USB to Mini B Cable Plug the Mini B end into the Mini B Port then plug the USB end into a computer Connecting to External Monitor with RCA Cable Plug one end into the RCA Video Out Port then plug other end into RCA Video In Port on monitor Page 7 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the A beginning of this document including all text under subheadings therein before set up or use of this product AWARNING TO PREVENT SERIOUS INJURY AND DEATH Always wear eye protection Wear ANSl approved safety goggles during use Before inspecting walls shut off the circuit breakers to the whole house Before inspecting pipes that may contain an electric charge have them checked by a qualified electrician Before inspecting an engine turn off the automobile Handheld Display Unit Controls Playback Right Flip Image _ Brighten Light Trash Can lt Cameral LEU aeal Video Dim Light OK Set
7. ndensation in Imager Head affect its safe operation e cracked or damaged Cable Cleaning and Storage 1 AFTER USE use a mild detergent 2 Store the Camera power supply on a clean cloth to remove any oil cables and accessories in a locked grease or dirt from the Camera area out of the reach of children especially on the buttons and ports being careful to not put excessive pressure on the Display Screen Troubleshooting Display is on but does 1 Cable connection loose 1 Check that Cable is connected Light is dim at 1 Low Battery 1 Charge Battery maximum brightness Display turns itself off 2 Low Battery 2 Charge Battery 3 Camera will not turn on 3 Low or dead Battery 3 Charge Battery if it won t take a charge have it replaced by a qualified technician Follow all safety precautions whenever diagnosing or servicing the tool Disconnect power supply before service Page 10 For technical questions please call 1 888 866 5797 Item 61838 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REP
8. oduct but must be supplied by the operator There are no user serviceable parts Camera service must be performed only by qualified repair personnel Item 61838 For technical questions please call 1 888 866 5797 Page 3 Specifications i 5 Battery Charging 41 F to 113 F Operating Temperature Display Screen 3 5 TFT LCD 320 x 240 Handheld Display Unit 32 F to 113 F Operating Temperature Imager Head Lights x Adjustable LED 9 VGA CMOS Imager Head IP67 Protected against the effect of Ingress Protection Rating immersion between 15cm and 1m Imager Head and Cable 14 F to 176 F Operating Temperature imate Capture JPG images 720 x 480 hadi ibis AVI videos 360 x 240 USB to Mini B Cable Video Output RCA Cable Micro SD Card CENA E C eA Page 4 For technical questions please call 1 888 866 5797 Item 61838 FE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation C E N Coe Item 61838 For technical questions please call 1 888 866 5797 Page 5 Setup Before Use beginning of this document including all text under subheadings therein 1 Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the before set up or use Components Cable Connector Display
9. or Freight Tools for a replacement Do not expose the Handheld Display Unit to rain or wet conditions Water entering the Display Unit increases the risk of electric shock Do not place the Imager Head and Cable into any place that may contain a live electric charge or moving parts which increases the risk of electric shock Make sure your hands are dry before operating the Camera or charging the battery If battery powered device has been damaged immediately stop use unplug and safely move away from flammable materials Follow instructions for charging battery DO NOT charge longer than recommended Allow a clearance of at least 4 on all sides during charging Item 61838 Camera Safety 1 The Handheld Display Unit is not waterproof The Imager Head and Cable are rated to IP67 See Specifications on page 4 Do not use the Camera if condensation forms in the Imager Head Let condensation evaporate before use Do not submerge the Imager Head and Cable into corrosive substances such as drain cleaner Do not get gasoline or oil on the Imager Head and Cable Personal Safety 1 Wear ANSI approved safety goggles during use Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Do not use the Camera while tired or under the influence of drugs alcohol or medications A momen
10. t of interruption can result in serious personal injury Do not over reach Keep proper footing and balance at all times Proper footing and balance enables better control of the Camera in unexpected situations Do not use the Camera for personal inspection or medical use in any way This is not a medical camera Service Do not use excessive force to insert or withdraw the Imager Head and Cable Do not use the Camera near moving machinery Do not place the Camera on any unstable cart or surface Handle the Camera with care If the Camera is dropped check for breakage and any other conditions that may affect its operation Store the Camera cables and accessories in a locked area out of the reach of children WARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code 25249 5 et seq People with pacemakers should consult their physician s before use Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this pr
11. tings Down Back Zoom Out Figure C Page 8 For technical questions please call 1 888 866 5797 Item 61838 General Operating Instructions Press the Power button to turn the Camera on Settings 1 Press the Settings Back W c Select TV out then press OK button to enter Setup Choose NTSC then press OK 2 Select Advanced Settings 3 Select Color or Black White then press OK then press OK Use Left Right a Select Date and Time then buttons to choose color or black Press OK Use Left Right and and white then press OK Up Down buttons to set date 4 Select Format Media then press OK and time then Press OK Choose No or Yes then press OK b Select Language then press Note Pressing OK while Yes is selected OK Use Left Right buttons to will erase all files from the Micro SD Card choose language then press OK 5 To view firmware version select Help then press OK Live Viewing View on Display Screen or use RCA cable to view on external monitor 1 Adjusting Light Press Left 2 Zooming Press Up button to zoom button to dim and turn off light in Press Down button to zoom out Press Right button to turn on 3 Flip Image Press the light and increase brightness Flip Image Trash Can CY button to flip image horizontally and vertically Capturing Images Press the Camera Video AYS button to toggle between camera and video modes 1 Camera mode Press OK 2 Video mode Press OK to start video to cap
12. ture image Press OK again to stop video Playback and Delete Playback on Display Screen external monitor or another device 1 Display Screen c To delete file press Flip Image Trash Can V button select a Press the Playback EE button 3 Ss 7 to view JPG and AVI files Use File Deiste tet pees Or Left Right and Up Down buttons 2 External Monitor Connect Camera to to navigate through files monitor using RCA cable then follow b Press OK to view image 1 Display Screen instructions or video For video press 3 Another Device Remove SD card OK to start and stop to view files on another device When finished press the Power button to turn the Camera off then clean and store according to Inspection and Maintenance on page 10 Item 61838 For technical questions please call 1 888 866 5797 Page 9 Inspection and Maintenance Procedures not specifically explained in this manual A must be performed only by a qualified technician AWARNING TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK Make sure that the Camera is OFF and unplugged from its charger before performing any procedure in this section TO PREVENT SERIOUS INJURY FROM TOOL FAILURE Do not use damaged equipment If abnormal noise or vibration occurs have the problem corrected before further use Inspection 1 BEFORE EACH USE inspect the e cracked or broken parts and general condition of the tool Check for any other condition that may e co
Download Pdf Manuals
Related Search