Home
Harbor Freight Tools 0.53 cu. ft. Digital Wall Safe Product manual
Contents
1. s level to set the template evenly in place 6 Make certain the work area is free of furniture and any items that may be damaged by dust from drilling Turn off the circuit breaker for the area you are working in to avoid electrocution 7 Hammer a nail into the center of the wall section to be removed Use a drywall saw or jig saw to cut out the section of wall as outlined by the template Depending on the depth of the Safe in relation to the depth of walls you may need to cut through two walls the wall nearest you and the one behind it Use the nail as a handle when pulling out the cut portion of the wall 8 Situate the Safe in its intended position and draw marks through the four mounting holes onto the studs Remove the Safe and use those marks to predrill pilot holes for the Screws 9 Set the Safe in place If it does not fit snugly use shims to wedge it in place Shims can be nailed to the wall studs 10 Thread the Screws into place Figure B 11 Secure Shelves in place as shown in Figure B by inserting Pins through the holes in the ends of each Shelf Item 97081 Components Wall Safe Key Pad Mounting Holes Keyhole Cover Figure C Bunker Hill Security Item 97081 For technical questions please call 1 800 444 3353 Page 5 Opening the Wall Safe 1 The Wall Safe is delivered with a pre 4 When the green light goes on turn set temporary pass code the knob to open the Wall Safe 2
2. The temporary pass code is either 159A or 159B 5 Ifthe green light does not go on and the yellow light continues to blink this indicates 3 On the Key Pad see Figure D enter the temporary that the wrong code was entered Wait pass code The yellow light on the LED will flash 20 seconds to input the pass code when each number is entered The green light will light up when the Wall Safe is ready to be opened Using the Override Key If the batteries have not been installed or are worn out open the safe using one of the Override Keys 1 Gently detach the panel covering the Key Hole see Figure D 2 Insert the Override Key into the lock and turn Turn the knob and pull the door open Override Key and Keyhole Figure D Important Never lock your Override Keys inside the safe Store them separately in a safe place Programming a Pass Code 1 Locate the Memory Button on the inside of the Door 4 Along beep will signify that your code has successfully been entered 2 Using a blunt tip such as the tip of a screwdriver or pen push and release the Memory Button 5 The Wall Safe will automatically enter a a lockout period after three attempts to use the 3 When you hear a beep enter a new pass code wrong code within five minutes The Wall Safe will not accept input during this period Note The new pass code may have between one The lockout period will last for one hour and ni
3. its contents Do not store Keys inside of the Safe Place the emergency keys in a location outside of the safe making sure they are in a secure location that you can find Warning The brass components of this product contain lead a chemical known to the State of California to cause birth defects or other reproductive harm California Health amp Safety code 25249 5 et seq Do not exceed the 99 Ib maximum weight capacity for the Wall Safe The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator The Safe is neither water nor fire proof NOTE Harbor Freight Tools is not responsible for the loss of any property stored within this safe due to theft fire or any other circumstance Bunker Hill Security Item 97081 For technical questions please call 1 800 444 3353 Page 3 AEEA AWARNING To prevent structural damage and possible collapse of the building Do not cut or alter studs to fit the Safe If the wall the Safe is to be installed in is a load bearing wall professional installation is required Note The instructions below apply only to installation in a wall with wood studs Installation involving a different type of wall will require other procedur
4. x 20 5 8 H 4 AA sold separatel Bunker Hill Security Page 2 For technical questions please call 1 800 444 3353 Item 97081 IMPORTANT SAFETY INFORMATION Installation Precautions Verify that installation surface has no hidden utility lines before drilling or driving screws Wear ANSI approved safety goggles during installation Mount securely before use Install only according to these instructions Improper installation can create hazards Keep installation area clean and well lit Use Precautions Keep closed and locked whenever unattended Check inside before closing Do not allow children to play with or near safe Keep keys and codes away from children Keep clear of door when closing Position batteries in proper polarity and do not install batteries of different types charge levels or capacities together Use as intended only Inspect before every use do not use if parts are loose or damaged Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement 10 11 Keep bystanders out of the area during installation Do not install when tired or when under the influence of alcohol drugs or medication Do not expose to rain For indoor use only After installation make certain that the Wall Safe is mounted securely Mounting surface must be able to support the Digital Wall Safe and
5. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Bunker Hill Security Digital Wall Safe Batteries sold separately To ensure security of your safe Bunker Hill Security does NOT provide replacement keys Visit our website at http www harborfreight com REV 13h Email our technical support at tech harborfreight com ITEM 97081 When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 800 444 3353 as soon as possible Copyright 2007 by Harbor Freight Tools All rights reserved l No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Specifications Overall Dimensions 3 3 4 L x 13 3 4 W
6. ays from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from
7. es or professional installation 1 Choose a wall in which to mount the Safe A wall that does not border the outside of the structure will provide an added layer of security The four Screws are for mounting in concrete or masonry If you are going to mount the Safe on another surface you must supply the appropriate hardware Mounting Holes Figure A 2 There are pre drilled holes in each side of the Wall Safe meant for mounting between two wall studs see Figure A Before mounting or drilling make certain that the space the Safe will be mounted in is of sufficient depth and width to encase the Wall Safe WARNING Verify that the installation location has no hidden utility lines before cutting drilling or driving screws 3 Open the Safe by using the included key Install 4 AA batteries aligned with the markings in the battery compartment Set up a pass code as explained in the Operation Instructions Page 4 For technical questions please call 1 800 444 3353 4 Wall studs are generally located at 16 intervals center stud to center stud Use a Stud Finder not included to locate existing studs If the existing studs are not located at 16 intervals use wood blocks or top and bottom support brackets not included to support the Wall Safe 5 Usea piece of paper to create a template using the back of the Wall Safe Once you have created the template set it at the desired space on the wall Use a carpenter
8. ne digits followed by either the A or B button Bunker Hill Security Page 6 For technical questions please call 1 800 444 3353 Item 97081 Maintenance and Servicing Damaged equipment can fail causing personal injury Do not use damaged ACAUTION equipment Installing and Replacing Batteries 1 The red LED light on the keypad will light when 2 Open the door of the Wall Safe Press the Tab the batteries are low When you observe the red on the Battery Cover to open it See Figure E LED light on immediately replace the batteries 3 Install four fresh AA Batteries into the Battery Battery p a W Compartment Make certain that the polarity of the K batteries is as indicated on the Battery Compartment 4 Replace Battery Cover Figure E Cleaning Maintenance and Lubrication 1 Occasionally wipe the safe and keypad with 2 Occasionally apply a small amount of lock a soft dry cloth or brush to remove dust lubricant not included to the mechanical lock mechanism Be careful not to get any oil or other liquids on or near the electronic mechanism Bunker Hill Security Item 97081 For technical questions please call 1 800 444 3353 Page 7 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 d
9. state to state Record Product s Serial Number Here Note If product has no serial number record Note Replacement parts are not available for this item month and year of purchase instead Bunker Hill Security 3491 Mission Oaks Blvd e PO Box 6009 Camarillo CA 93011 800 444 3353
Download Pdf Manuals
Related Search
Related Contents
INSTALLATION AND OPERATION MANUAL Philips BeNear CD6901B nnonces - Groupe FLO Optima 170.indd Mix Rack - Digidesign Origin Storage 750GB TLC SATA Verzeichnis 1.Sicherheitshinweise und Warnungen KitchenAid KEMI301G User's Manual Copyright © All rights reserved.
Failed to retrieve file