GE Induction Specification Sheet
Contents
1. GE Lighting Solutions GUIDE FORM SPECIFICATIONS INDOOR LIGHTING GARAGE GUARDIAN LUMINAIRE INDUCTION Low Bay Enclosed GENERAL DESCRIPTION The complete luminaire designated identify shall be a GE GARAGE GUARDIAN luminaire with ordering number specify GBP or GBC plus ordering number logic from catalog or approved equal to operate one specify 85 watt QL Induction lamp ballast from a nominal120volt 60 Hz or 50 Hz power source The luminaire shall include a completely prewired integral ballast and optical assembly The luminaire shall be suitable for continuous service indoors in a maximum ambient temperature of 40 C The luminaire shall be UL Listed SUITABLE FOR DAMP LOCATIONS or UL LISTED FOR WET LOCA TIONS depending on mounting and C UL Canadian Listed for Indoor Locations MECHANICAL CONSTRUCTION The luminaire shall be shipped as a completely assembled fixture Induction lamp installed The ballast housing and optical assembly shall be provided with easy to read moisture resistant nameplates which can be seen without disturbing the installed luminaire The luminaire shall include provision for optional field mounting of safety chain The ballast housing shall be made of die cast aluminum The ballast housing shall have a polyester powder paint finish The luminaire shall include a specify mounting code mounting from the following optional mounting configurations 10 Surface Mtg Juncti2. LECTRI CAL INFORMATION REFER TO BALLAST SPECIFICATIONS IN TECHNICAL DATA SECTION Guide Form Specifications 2011 GE Lighting Solutions e 1 888 MY GE LED e www gelightingsolutions com 1 888 69 43 533 GE Lighting Solutions is a subsidiary of the General Electric Company Evolve and other trademarks belong to GE Lighting Solutions The GE brand and logo are trademarks of the General Electric Company 2011 GE Lighting Solutions Information provided is subject to change without notice All values are design or typical values when measured under laboratory conditions
3. on box not included 11 3 4 Rigid Pendant 12 3 4 Pendant With Bird Shield 13 3 4 Flex Pendant Adjustable 01 Primary Electrical Disconnect With MPM C 02 Primary Electrical Disconnect With MPM 3PR 03 Primary Electrical Disconnect With MPM 3PF 04 Primary Electrical Disconnect With MPM 3PRFW 05 Primary Electrical Disconnect With MPM 3PRTFW 06 Primary Electrical Disconnect With MPM WW NOTE Bird Shield Adds 4 4 To Overall Height See GELS Product Selection Guide for MPM mounting details BALLAST OPERATION The luminaire shall contain a standard electro magnetic ballast with high power factor in full compliance with lamp ballast specifications available to the fixture manufacturer from the lamp manufacturers at the time of fixture manufacture The ballast shall reliably start and operate the lamp in ambient temperatures down to 20 F 29 C OPTICAL ASSEMBLY The optical assembly shall be enclosed and gasketed to prevent entrance of particulate contaminants The refractor shall be UV stabilized injection molded prismatic heat resistant acrylic or optional impact resistant polycarbonate optic and lens The optical shall have downlight cutoff classification with up light window and either clear or painted lower refractor band and have optional field adjustable internal uplight shielding REFER TO PRODUCT PAGE IN GELS PRODUCT CATALOG FOR OTHER BALLAST SELECTIONS FOR MORE DEFINITIVE E
Download Pdf Manuals
Related Search